From 4d909049bc036bcbba6637b7ae5c65abf165fb09 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 1 Feb 2005 01:22:57 +0000 Subject: 8 ways works now git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1904 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/northbridge/amd/amdk8/coherent_ht.c | 592 ++++++++++++++++---------------- 1 file changed, 296 insertions(+), 296 deletions(-) (limited to 'src/northbridge') diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c index 0c6ce49a82..8ca1bfbf89 100644 --- a/src/northbridge/amd/amdk8/coherent_ht.c +++ b/src/northbridge/amd/amdk8/coherent_ht.c @@ -88,10 +88,20 @@ typedef uint32_t u32; #define TRY_HIGH_FIRST 0 #endif +#ifndef K8_HT_FREQ_1G_SUPPORT + #define K8_HT_FREQ_1G_SUPPORT 0 +#endif + +#ifndef CONFIG_MAX_CPUS_4_BUT_MORE_INSTALLED +#define CONFIG_MAX_CPUS_4_BUT_MORE_INSTALLED 0 +#endif + static inline void print_linkn (const char *strval, uint8_t byteval) { +#if 1 print_debug(strval); print_debug_hex8(byteval); print_debug("\r\n"); +#endif } static void disable_probes(void) @@ -263,22 +273,12 @@ static unsigned read_freq_cap(device_t dev, unsigned pos) freq_cap = pci_read_config16(dev, pos); freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */ - id = pci_read_config32(dev, 0); -#if 0 - //is it coherent ht link? - /* AMD 8131 Errata 48 */ - if (id == (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_AMD_8131_PCIX << 16))) { - freq_cap &= ~(1 << HT_FREQ_800Mhz); - } - /* AMD 8151 Errata 23 */ - if (id == (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_AMD_8151_SYSCTRL << 16))) { - freq_cap &= ~(1 << HT_FREQ_800Mhz); - } -#endif /* AMD K8 Unsupported 1Ghz? */ + id = pci_read_config32(dev, 0); if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) { freq_cap &= ~(1 << HT_FREQ_1000Mhz); } + return freq_cap; } @@ -417,7 +417,7 @@ static uint8_t get_linkn_last(uint8_t byte) static uint8_t get_linkn_last_count(uint8_t byte) { - byte &= 0x3f; + byte &= 0x0f; if(byte & 0x02) { byte &= 0xcf; byte |= 0x00; byte+=0x40; } if(byte & 0x04) { byte &= 0xcf; byte |= 0x10; byte+=0x40; } if(byte & 0x08) { byte &= 0xcf; byte |= 0x20; byte+=0x40; } @@ -467,7 +467,7 @@ static void setup_remote_node(u8 node) #if CONFIG_MAX_CPUS > 2 #if !CROSS_BAR_47_56 -static void setup_row_indirect_x(u8 temp, u8 source, u8 dest, u8 gateway) +static void setup_row_indirect_x(u8 temp, u8 source, u8 dest) #else static void setup_row_indirect_x(u8 temp, u8 source, u8 dest, u8 gateway, u8 diff) #endif @@ -476,7 +476,13 @@ static void setup_row_indirect_x(u8 temp, u8 source, u8 dest, u8 gateway, u8 dif uint32_t val_s; uint32_t val; #if !CROSS_BAR_47_56 + u8 gateway; u8 diff; + if(source 4 +#if (CONFIG_MAX_CPUS > 4) || (CONFIG_MAX_CPUS_4_BUT_MORE_INSTALLED == 1) uint8_t byte; /* Some node have two links left * don't worry we only have (2, (3 as source need to handle @@ -523,9 +529,9 @@ static void setup_row_indirect_x(u8 temp, u8 source, u8 dest, u8 gateway, u8 dif } #if !CROSS_BAR_47_56 -static void setup_row_indirect(u8 source, u8 dest, u8 gateway) +static void setup_row_indirect(u8 source, u8 dest) { - setup_row_indirect_x(source, source, dest, gateway); + setup_row_indirect_x(source, source, dest); } #else static void setup_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff) @@ -539,8 +545,8 @@ static void setup_row_indirect_group(const u8 *conn, int num) int i; #if !CROSS_BAR_47_56 - for(i=0; i 4 +#if (CONFIG_MAX_CPUS > 4) || (CONFIG_MAX_CPUS_4_BUT_MORE_INSTALLED == 1) val = get_row(7,1); byte = (val>>16) & 0xfe; byte = get_linkn_last_count(byte); @@ -655,20 +657,16 @@ static struct setup_smp_result setup_smp2(void) #else byte = get_linkn_last(byte); /* Max link to Node1*/ #endif - print_linkn("-->(0,1) link=", byte); + print_linkn("\t-->(0,1) link=", byte); setup_row_direct(0,1, byte); setup_temp_row(0, 1); - if (!check_connection(7)) { - print_spew("No connection to Node 1.\r\n"); - result.nodes = 1; - return result; - } + check_connection(7); /* We found 2 nodes so far */ val = pci_read_config32(NODE_HT(7), 0x6c); byte = (val>>2) & 0x3; /* get default link on node7 to node0*/ - print_linkn("-->(1,0) link=", byte); + print_linkn("\t-->(1,0) link=", byte); setup_row_local(7,1); setup_remote_row_direct(1, 0, byte); } @@ -714,13 +712,6 @@ static struct setup_smp_result setup_smp4(int needs_reset) byte &= 3; /* bit [3,2] is count-1*/ print_linkn("(0,2) link=", byte); setup_row_direct(0, 2, byte); /*(0,2) direct link done*/ - setup_temp_row(0, 2); - - if (!check_connection(7) ) { - print_spew("No connection to Node 2.\r\n"); - result.nodes = 2; - return result; - } /* We found 3 nodes so far. Now setup a temporary * connection from node 0 to node 3 via node 1 @@ -732,19 +723,13 @@ static struct setup_smp_result setup_smp4(int needs_reset) byte = get_linkn_first(byte); print_linkn("(1,3) link=", byte); setup_row_direct(1,3,byte); /* (1, 3) direct link done*/ - setup_temp_row(1,3); /* temp. link between nodes 1 and 3 */ - - if (!check_connection(7)) { - print_spew("No connection to Node 3.\r\n"); - result.nodes = 2; - return result; - } /* We found 4 nodes so far. Now setup all nodes for 4p */ + // We need to make sure 0,2 and 1,3 link is set already #if !CROSS_BAR_47_56 static const u8 conn4_1[] = { - 0,3,2, - 1,2,3, + 0,3, + 1,2, }; #else static const u8 conn4_1[] = { @@ -756,50 +741,30 @@ static struct setup_smp_result setup_smp4(int needs_reset) setup_row_indirect_group(conn4_1, sizeof(conn4_1)/sizeof(conn4_1[0])); setup_temp_row(0,2); - + check_connection(7); val = pci_read_config32(NODE_HT(7), 0x6c); byte = (val>>2) & 0x3; /* get default link on 7 to 0*/ print_linkn("(2,0) link=", byte); setup_row_local(7,2); - setup_remote_row_direct(2, 0, byte); + setup_remote_row_direct(2, 0, byte); /* node 2 to node 0 direct link done */ setup_remote_node(2); /* Setup the regs on the remote node */ -#if !CROSS_BAR_47_56 - static const u8 conn4_2[] = { - 2,1,0, - }; -#else - static const u8 conn4_2[] = { - 2,1,0,1, - }; -#endif - setup_remote_row_indirect_group(conn4_2, sizeof(conn4_2)/sizeof(conn4_2[0])); rename_temp_node(2); /* Rename Node 7 to Node 2 */ enable_routing(2); /* Enable routing on Node 2 */ setup_temp_row(0,1); setup_temp_row(1,3); + check_connection(7); val = pci_read_config32(NODE_HT(7), 0x6c); byte = (val>>2) & 0x3; /* get default link on 7 to 1*/ print_linkn("(3,1) link=", byte); setup_row_local(7,3); - setup_remote_row_direct(3, 1, byte); + setup_remote_row_direct(3, 1, byte); /* node 3 to node 1 direct link done */ setup_remote_node(3); /* Setup the regs on the remote node */ -#if !CROSS_BAR_47_56 - static const u8 conn4_3[] = { - 3,0,1, - }; -#else - static const u8 conn4_3[] = { - 3,0,1,1, - }; -#endif - setup_remote_row_indirect_group(conn4_3, sizeof(conn4_3)/sizeof(conn4_3[0])); - /* We need to init link between 2, and 3 direct link */ val = get_row(2,2); byte = ((val>>16) & 0xfe) - link_connection(2,0); @@ -811,16 +776,15 @@ static struct setup_smp_result setup_smp4(int needs_reset) setup_temp_row(2,3); check_connection(7); /* to 3*/ -#if CONFIG_MAX_CPUS > 4 +#if (CONFIG_MAX_CPUS > 4) || (CONFIG_MAX_CPUS_4_BUT_MORE_INSTALLED == 1) /* We need to find out which link is to node3 */ - if((byte>>2)==2) { /* one to node3, one to node0, one to node4*/ val = get_row(7,3); - if((val>>16) == 1) { /* that link is to node4, because via node3 it has been set, recompute it*/ + if((val>>16) == 1) { /* that link is to node4, because via node1 it has been set, recompute it*/ val = get_row(2,2); byte = ((val>>16) & 0xfe) - link_connection(2,0); byte = get_linkn_first(byte); - print_linkn("-->(2,3) link=", byte); + print_linkn("\t-->(2,3) link=", byte); setup_row_direct(2,3,byte); setup_temp_row(2,3); check_connection(7); /* to 3*/ @@ -833,10 +797,56 @@ static struct setup_smp_result setup_smp4(int needs_reset) print_linkn("(3,2) link=", byte); setup_remote_row_direct(3,2, byte); +#if (CONFIG_MAX_CPUS > 4) || (CONFIG_MAX_CPUS_4_BUT_MORE_INSTALLED == 1) + /* set link from 3 to 5 before enable it*/ + val = get_row(7,3); + byte = ((val>>16) & 0xfe) - link_connection(7,2) - link_connection(7,1); + byte = get_linkn_last_count(byte); + if((byte>>2)==1) { /* We should have three coherent links on node 3 for 6p and above*/ + byte &= 3; /*bit [3,2] is count-2*/ + print_linkn("(3,5) link=", byte); + setup_remote_row_direct(3, 5, byte); + } + + val = get_row(2,2); + byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0); + byte = get_linkn_last_count(byte); + + if((byte>>2)==1) { /* We should have three coherent link on node 2 for 6p and above*/ + byte &= 3; /* bit [3,2] is count-2*/ + print_linkn("(2,4) link=", byte); + setup_row_direct(2, 4, byte); + } +#endif + + //Beside 3, 1 is set, We need to make sure 3, 5 is set already in case has three link in 3 +#if !CROSS_BAR_47_56 + static const u8 conn4_3[] = { + 3,0, + }; +#else + static const u8 conn4_3[] = { + 3,0,1,1, + }; +#endif + setup_remote_row_indirect_group(conn4_3, sizeof(conn4_3)/sizeof(conn4_3[0])); + /* ready to enable RT for Node 3 */ rename_temp_node(3); enable_routing(3); /* enable routing on node 3 (temp.) */ + // beside 2, 0 is set, We need to make sure 2, 4 link is set already in case has three link in 2 +#if !CROSS_BAR_47_56 + static const u8 conn4_2[] = { + 2,1, + }; +#else + static const u8 conn4_2[] = { + 2,1,0,1, + }; +#endif + setup_row_indirect_group(conn4_2, sizeof(conn4_2)/sizeof(conn4_2[0])); + #if 0 /*We need to do sth to reverse work for setup_temp_row (0,1) (1,3) */ /* it will be done by clear_dead_links */ @@ -870,67 +880,39 @@ static struct setup_smp_result setup_smp6(int needs_reset) result.nodes=6; result.needs_reset = needs_reset; - /* Setup and check temporary connection from Node 0 to Node 4 via 2 */ - val = get_row(2,2); - byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0); - byte = get_linkn_last_count(byte); - - if((byte>>2)==0) { /* We should have two coherent link on node 2 for 6p and above*/ - result.nodes = 4; - return result; - } - byte &= 3; /* bit [3,2] is count-2*/ - print_linkn("(2,4) link=", byte); - setup_row_direct(2, 4, byte); - /* Setup and check temporary connection from Node 0 to Node 4 through 2*/ - for(byte=0; byte<4; byte+=2) { - setup_temp_row(byte,byte+2); - } + val = get_row(2,2); + byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0); + byte = get_linkn_last_count(byte); - if (!check_connection(7) ) { - print_spew("No connection to Node 4.\r\n"); - result.nodes = 4; - return result; - } + if((byte>>2)==0) { /* We should have three coherent link on node 2 for 6p and above*/ + result.nodes = 4; + return result; + } /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3*/ - val = get_row(3,3); - byte = ((val>>16) & 0xfe) - link_connection(3,2) - link_connection(3,1); - byte = get_linkn_last_count(byte); - if((byte>>2)==0) { /* We should have two coherent links on node 3 for 6p and above*/ - result.nodes = 4; - return result; - } - - byte &= 3; /*bit [3,2] is count-2*/ - print_linkn("(3,5) link=", byte); - setup_row_direct(3, 5, byte); - - setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ - for(byte=0; byte<4; byte+=2) { - setup_temp_row(byte+1,byte+3); - } - - if (!check_connection(7)) { - print_spew("No connection to Node 5.\r\n"); - result.nodes = 4; - return result; - } + /* set link from 3 to 5 before enable it*/ + val = get_row(3,3); + byte = ((val>>16) & 0xfe) - link_connection(3,2) - link_connection(3,1); + byte = get_linkn_last_count(byte); + if((byte>>2)==0) { /* We should have three coherent links on node 3 for 6p and above*/ + result.nodes = 4; + return result; + } /* We found 6 nodes so far. Now setup all nodes for 6p */ #warning "FIXME we need to find out the correct gateway for 6p" static const u8 conn6_1[] = { #if !CROSS_BAR_47_56 - 0, 4, 2, - 0, 5, 1, - 1, 4, 3, - 1, 5, 3, - 2, 5, 3, - 3, 4, 5, + 0, 4, + 0, 5, + 1, 4, + 1, 5, + 2, 5, + 3, 4, #else 0, 4, 2, 0, - 0, 5, 1, 1, + 0, 5, 2, 1, 1, 4, 3, 1, 1, 5, 3, 0, 2, 5, 3, 0, @@ -943,6 +925,7 @@ static struct setup_smp_result setup_smp6(int needs_reset) for(byte=0; byte<4; byte+=2) { setup_temp_row(byte,byte+2); } + check_connection(7); val = pci_read_config32(NODE_HT(7), 0x6c); byte = (val>>2) & 0x3; /*get default link on 7 to 2*/ print_linkn("(4,2) link=", byte); @@ -950,17 +933,14 @@ static struct setup_smp_result setup_smp6(int needs_reset) setup_row_local(7,4); setup_remote_row_direct(4, 2, byte); setup_remote_node(4); /* Setup the regs on the remote node */ + /* Set indirect connection to 0, to 3 */ + //we only need to set 4,0 here static const u8 conn6_2[] = { #if !CROSS_BAR_47_56 - 4, 0, 2, - 4, 1, 2, - 4, 3, 2, + 4, 0, #else 4, 0, 2, 0, - 4, 1, 2, 0, - 4, 3, 2, 0, - 4, 5, 2, 0, #endif }; @@ -973,6 +953,7 @@ static struct setup_smp_result setup_smp6(int needs_reset) for(byte=0; byte<4; byte+=2) { setup_temp_row(byte+1,byte+3); } + check_connection(7); val = pci_read_config32(NODE_HT(7), 0x6c); byte = (val>>2) & 0x3; /* get default link on 7 to 3*/ @@ -1003,7 +984,7 @@ static struct setup_smp_result setup_smp6(int needs_reset) val = get_row(4,4); byte = ((val>>16) & 0xfe) - link_connection(4,2); byte = get_linkn_first(byte); - print_linkn("-->(4,5) link=", byte); + print_linkn("\t-->(4,5) link=", byte); setup_row_direct(4,5,byte); setup_temp_row(4,5); check_connection(7); /* to 5*/ @@ -1015,19 +996,37 @@ static struct setup_smp_result setup_smp6(int needs_reset) byte = (val>>2) & 0x3; /* get default link on 7 to 4*/ print_linkn("(5,4) link=", byte); setup_remote_row_direct(5,4, byte); + + //init 5, 7 here + val = get_row(7,5); + byte = ((val>>16) & 0xfe) - link_connection(7,4) - link_connection(7,3); + byte = get_linkn_last_count(byte); + if((byte>>2)==1) { /* We should have three coherent links on node 5 for 6p and above*/ + byte &= 3; /*bit [3,2] is count-2*/ + print_linkn("(5,7) link=", byte); + setup_remote_row_direct(5, 7, byte); + } + + //init 4,6 here + val = get_row(4,4); + byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2); + byte = get_linkn_last_count(byte); + + if((byte>>2)==1) { /* We should have three coherent link on node 4 for 6p and above*/ + byte &= 3; /* bit [3,2] is count-2*/ + print_linkn("(4,6) link=", byte); + setup_row_direct(4, 6, byte); + } + #endif + //We need to set 5,0 here only, We need to set up 5, 7 to make 5,0 /* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */ static const u8 conn6_3[] = { #if !CROSS_BAR_47_56 - 5, 0, 4, - 5, 2, 4, - 5, 1, 3, + 5, 0, #else 5, 0, 3, 0, - 5, 2, 3, 0, - 5, 1, 3, 0, - 5, 4, 3, 0, #endif }; @@ -1037,6 +1036,28 @@ static struct setup_smp_result setup_smp6(int needs_reset) rename_temp_node(5); enable_routing(5); /* enable routing on node 5 (temp.) */ + static const u8 conn6_4[] = { +#if !CROSS_BAR_47_56 + 4, 1, + 4, 3, + + 5, 2, + 5, 1, + +#else + 4, 1, 2, 0, + 4, 3, 2, 0, + 4, 5, 2, 0, + + 5, 2, 3, 0, + 5, 1, 3, 0, + 5, 4, 3, 0, + +#endif + }; + + setup_row_indirect_group(conn6_4, sizeof(conn6_4)/sizeof(conn6_4[0])); + #if 0 /* We need to do sth about reverse about setup_temp_row (0,1), (2,4), (1, 3), (3,5) * It will be done by clear_dead_links @@ -1075,81 +1096,56 @@ static struct setup_smp_result setup_smp8(int needs_reset) /* Setup and check temporary connection from Node 0 to Node 6 via 2 and 4 to 7 */ val = get_row(4,4); -#if !CROSS_BAR_47_56 - byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2); -#else +#if CROSS_BAR_47_56 byte = ((val>>16) & 0xfe) - link_connection(4,2); +#else + byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2); + byte = get_linkn_last_count(byte); /* Max link to 6*/ + if((byte>>2)==0) { /* We should have two or three coherent links on node 4 for 8p*/ + result.nodes = 6; + return result; + } #endif -#if TRY_HIGH_FIRST == 1 +#if CROSS_BAR_47_56 byte = get_linkn_last_count(byte); /* Max link to 6*/ - if((byte>>2)==0) { /* We should have two or three coherent links on node 4 for 8p*/ + if((byte>>2)<2) { /* We should have two or three coherent links on node 4 for 8p*/ result.nodes = 6; return result; } +#if TRY_HIGH_FIRST == 1 byte &= 3; /* bit [3,2] is count-1 or 2*/ #else + byte = ((val>>16) & 0xfe) - link_connection(4,2); byte = get_linkn_first(byte); /*Min link to 6*/ #endif print_linkn("(4,6) link=", byte); setup_row_direct(4, 6, byte); +#endif - /* Setup and check temporary connection from Node 0 to Node 6 through 2, and 4*/ - for(byte=0; byte<6; byte+=2) { - setup_temp_row(byte,byte+2); - } - - if (!check_connection(7) ) { - print_spew("No connection to Node 6.\r\n"); - result.nodes = 6; - return result; - } #if !CROSS_BAR_47_56 /* Setup and check temporary connection from Node 0 to Node 7 through 1, 3, 5*/ - val = get_row(5,5); - byte = ((val>>16) & 0xfe) - link_connection(5,4) - link_connection(5,3); - byte = get_linkn_first(byte); - print_linkn("(5,7) link=", byte); - setup_row_direct(5, 7, byte); - - setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ - for(byte=0; byte<6; byte+=2) { - setup_temp_row(byte+1,byte+3); - } -#else - val = get_row(4,4); - byte = ((val>>16) & 0xfe) - link_connection(4,2) - link_connection(4,6); - byte = get_linkn_first(byte); - print_linkn("(4,7) link=", byte); - setup_row_direct(4, 7, byte); - - /* Setup and check temporary connection from Node 0 to Node 7 through 2, and 4*/ - for(byte=0; byte<4; byte+=2) { - setup_temp_row(byte,byte+2); - } - setup_temp_row(4, 7); - + val = get_row(5,5); + byte = ((val>>16) & 0xfe) - link_connection(5,4) - link_connection(5,3); + byte = get_linkn_last_count(byte); + if((byte>>2)==0) { /* We should have three coherent links on node 5 for 6p and above*/ + result.nodes = 6; + return result; + } #endif - if (!check_connection(7)) { - print_spew("No connection to Node 7.\r\n"); - result.nodes = 6; - return result; - } - - /* We found 8 nodes so far. Now setup all nodes for 8p */ static const u8 conn8_1[] = { #if !CROSS_BAR_47_56 - 0, 6, 2, - /*0, 7, 1,*/ - 1, 6, 3, - /*1, 7, 3,*/ - 2, 6, 4, - /*2, 7, 3,*/ - 3, 6, 5, - /*3, 7, 5,*/ - /*4, 7, 5,*/ + 0, 6, + /*0, 7,*/ + 1, 6, + /*1, 7,*/ + 2, 6, + /*2, 7,*/ + 3, 6, + /*3, 7,*/ + /*4, 7,*/ #else 0, 6, 2, 0, /*0, 7, 2, 0,*/ @@ -1167,6 +1163,7 @@ static struct setup_smp_result setup_smp8(int needs_reset) for(byte=0; byte<6; byte+=2) { setup_temp_row(byte,byte+2); } + check_connection(7); val = pci_read_config32(NODE_HT(7), 0x6c); byte = (val>>2) & 0x3; /* get default link on 7 to 4*/ print_linkn("(6,4) link=", byte); @@ -1178,20 +1175,64 @@ static struct setup_smp_result setup_smp8(int needs_reset) #warning "FIXME we need to find out the correct gateway for 8p" static const u8 conn8_2[] = { #if !CROSS_BAR_47_56 - 6, 0, 4, - 6, 1, 4, - 6, 2, 4, - 6, 3, 4, - 6, 5, 4, + 6, 0, #else 6, 0, 4, 0, - /*6, 1, 5, 0,*/ - 6, 2, 4, 0, - /*6, 3, 5, 0,*/ #endif }; setup_remote_row_indirect_group(conn8_2, sizeof(conn8_2)/sizeof(conn8_2[0])); + +#if CROSS_BAR_47_56 + //init 5, 6 here + /* here init 5, 6 */ + /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/ + val = get_row(5,5); + byte = ((val>>16) & 0xfe) - link_connection(5,3); +#if TRY_HIGH_FIRST == 1 + byte = get_linkn_last(byte); +#else + byte = get_linkn_first(byte); +#endif + print_linkn("(5,6) link=", byte); + setup_row_direct(5, 6, byte); + + setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ + for(byte=0; byte<4; byte+=2) { + setup_temp_row(byte+1,byte+3); + } + setup_temp_row(5,6); + + check_connection(7); + + val = get_row(7,6); // to chect it if it is node6 before renaming + if( (val>>16) == 1) { // it is real node 7 so swap it + /* We need to recompute link to 6 */ + val = get_row(5,5); + byte = ((val>>16) & 0xfe) - link_connection(5,3); +#if TRY_HIGH_FIRST == 1 + byte = get_linkn_first(byte); +#else + byte = get_linkn_last(byte); +#endif + print_linkn("\t-->(5,6) link=", byte); + setup_row_direct(5, 6, byte); +#if 0 + setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ + for(byte=0; byte<4; byte+=2) { + setup_temp_row(byte+1,byte+3); + } +#endif + setup_temp_row(5,6); + + check_connection(7); + } + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /* get default link on 7 to 5*/ + print_linkn("(6,5) link=", byte); + setup_remote_row_direct(6, 5, byte); + /*Till now 56, 65 done */ +#endif rename_temp_node(6); enable_routing(6); @@ -1202,6 +1243,8 @@ static struct setup_smp_result setup_smp8(int needs_reset) setup_temp_row(byte+1,byte+3); } + check_connection(7); + val = pci_read_config32(NODE_HT(7), 0x6c); byte = (val>>2) & 0x3; /* get default link on 7 to 5*/ print_linkn("(7,5) link=", byte); @@ -1209,10 +1252,19 @@ static struct setup_smp_result setup_smp8(int needs_reset) setup_remote_row_direct(7, 5, byte); #else + val = get_row(4,4); + byte = ((val>>16) & 0xfe) - link_connection(4,2) - link_connection(4,6); + byte = get_linkn_first(byte); + print_linkn("(4,7) link=", byte); + setup_row_direct(4, 7, byte); + + /* Setup and check temporary connection from Node 0 to Node 7 through 2, and 4*/ for(byte=0; byte<4; byte+=2) { setup_temp_row(byte,byte+2); } - setup_temp_row(4,7); + + check_connection(7); + val = pci_read_config32(NODE_HT(7), 0x6c); byte = (val>>2) & 0x3; /* get default link on 7 to 4*/ print_linkn("(7,4) link=", byte); @@ -1226,135 +1278,83 @@ static struct setup_smp_result setup_smp8(int needs_reset) /* here init 5, 7 */ /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/ val = get_row(5,5); - byte = ((val>>16) & 0xfe) - link_connection(5,3); - byte = get_linkn_last(byte); + byte = ((val>>16) & 0xfe) - link_connection(5,3) - link_connection(5,6); + byte = get_linkn_first(byte); print_linkn("(5,7) link=", byte); setup_row_direct(5, 7, byte); setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ - for(byte=0; byte<6; byte+=2) { + for(byte=0; byte<4; byte+=2) { setup_temp_row(byte+1,byte+3); } - if (!check_connection(7)) { - /* We need to recompute link to 7 */ - val = get_row(5,5); - byte = ((val>>16) & 0xfe) - link_connection(5,3); - byte = get_linkn_first(byte); + check_connection(7); - print_linkn("-->(5,7) link=", byte); - setup_row_direct(5, 7, byte); -#if 0 - setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ - for(byte=0; byte<6; byte+=2) { - setup_temp_row(byte+1,byte+3); - } -#else - setup_temp_row(5,7); -#endif - check_connection(7); - } val = pci_read_config32(NODE_HT(7), 0x6c); byte = (val>>2) & 0x3; /* get default link on 7 to 5*/ print_linkn("(7,5) link=", byte); setup_remote_row_direct(7, 5, byte); /*Till now 57, 75 done */ - /* init init 5, 6 */ - val = get_row(5,5); - byte = ((val>>16) & 0xfe) - link_connection(5,3) - link_connection(5,7); - byte = get_linkn_first(byte); - print_linkn("(5,6) link=", byte); - setup_row_direct(5, 6, byte); - - /* init 6,7 */ - val = get_row(6,6); - byte = ((val>>16) & 0xfe) - link_connection(6,4); - byte = get_linkn_last(byte); - print_linkn("(6,7) link=", byte); - setup_row_direct(6, 7, byte); - - for(byte=0; byte<6; byte+=2) { - setup_temp_row(byte,byte+2); - } - setup_temp_row(6,7); - - if (!check_connection(7)) { - /* We need to recompute link to 7 */ - val = get_row(6,6); - byte = ((val>>16) & 0xfe) - link_connection(6,4); - byte = get_linkn_first(byte); - print_linkn("-->(6,7) link=", byte); - - setup_row_direct(6, 7, byte); -#if 0 - for(byte=0; byte<6; byte+=2) { - setup_temp_row(byte,byte+2); /* temp. link between nodes 0 and 2 */ - } #endif - setup_temp_row(6,7); - check_connection(7); - } - val = pci_read_config32(NODE_HT(7), 0x6c); - byte = (val>>2) & 0x3; /* get default link on 7 to 6*/ - print_linkn("(7,6) link=", byte); - - setup_remote_row_direct(7, 6, byte); - /* Till now 67, 76 done*/ - - /* init 6,5 */ - val = get_row(6,6); - byte = ((val>>16) & 0xfe) - link_connection(6,4) - link_connection(6,7); - byte = get_linkn_first(byte); - print_linkn("(6,5) link=", byte); - setup_row_direct(6, 5, byte); -#endif - -#if !CROSS_BAR_47_56 /* We need to init link between 6, and 7 direct link */ val = get_row(6,6); +#if !CROSS_BAR_47_56 byte = ((val>>16) & 0xfe) - link_connection(6,4); +#else + byte = ((val>>16) & 0xfe) - link_connection(6,4) - link_connection(6,5); +#endif byte = get_linkn_first(byte); print_linkn("(6,7) link=", byte); setup_row_direct(6,7, byte); val = get_row(7,7); +#if !CROSS_BAR_47_56 byte = ((val>>16) & 0xfe) - link_connection(7,5); +#else + byte = ((val>>16) & 0xfe) - link_connection(7,5) - link_connection(7,4); +#endif byte = get_linkn_first(byte); print_linkn("(7,6) link=", byte); setup_row_direct(7,6, byte); -#endif /* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */ static const u8 conn8_3[] = { #if !CROSS_BAR_47_56 - 0, 7, 1, /* restore it*/ - 1, 7, 3, - 2, 7, 3, - 3, 7, 5, - 4, 7, 5, - - 7, 0, 6, - 7, 1, 5, - 7, 2, 6, - 7, 3, 5, - 7, 4, 6, + 0, 7, /* restore it*/ + 1, 7, + 2, 7, + 3, 7, + 4, 7, + + 6, 1, + 6, 2, + 6, 3, + 6, 5, + + 7, 0, + 7, 1, + 7, 2, + 7, 3, + 7, 4, #else 0, 7, 2, 0, /* restore it*/ 1, 7, 3, 0, 2, 7, 4, 0, 3, 7, 5, 0, - - 6, 1, 5, 0, /*???*/ - 6, 3, 5, 0, /*???*/ - + + 6, 1, 5, 0, + 6, 2, 4, 0, + 6, 3, 5, 0, + 7, 0, 4, 0, 7, 1, 5, 0, 7, 2, 4, 0, 7, 3, 5, 0, - 4, 5, 7, 0, - 5, 4, 6, 0, + + 4, 5, 6, 1, + 5, 4, 7, 1, #endif }; @@ -1392,7 +1392,7 @@ static struct setup_smp_result setup_smp(void) result = setup_smp2(); #if CONFIG_MAX_CPUS > 2 - if(result.nodes == 2 ) + if(result.nodes == 2) result = setup_smp4(result.needs_reset); #endif @@ -1557,7 +1557,7 @@ static int apply_cpu_errata_fixes(unsigned nodes, int needs_reset) } } - else { + else { uint32_t cmd_ref; /* Errata 98 * Set Clk Ramp Hystersis to 7 -- cgit v1.2.3