From e99f0390b9b8e04b197b165e6e63826ce9631d35 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ky=C3=B6sti=20M=C3=A4lkki?= Date: Thu, 24 May 2018 02:02:42 +0300 Subject: Remove VIA CX700 northbridge support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Change-Id: Id46e3d40393598f6b03ae4fd3186182635f072ca Signed-off-by: Kyösti Mälkki Reviewed-on: https://review.coreboot.org/26678 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/northbridge/via/cx700/Kconfig | 55 - src/northbridge/via/cx700/Makefile.inc | 26 - src/northbridge/via/cx700/agp.c | 83 -- src/northbridge/via/cx700/early_serial.c | 98 -- src/northbridge/via/cx700/early_smbus.c | 240 ----- src/northbridge/via/cx700/lpc.c | 301 ------ src/northbridge/via/cx700/northbridge.c | 136 --- src/northbridge/via/cx700/raminit.c | 1690 ------------------------------ src/northbridge/via/cx700/raminit.h | 24 - src/northbridge/via/cx700/registers.h | 45 - src/northbridge/via/cx700/reset.c | 22 - src/northbridge/via/cx700/sata.c | 156 --- src/northbridge/via/cx700/usb.c | 52 - src/northbridge/via/cx700/vga.c | 209 ---- 14 files changed, 3137 deletions(-) delete mode 100644 src/northbridge/via/cx700/Kconfig delete mode 100644 src/northbridge/via/cx700/Makefile.inc delete mode 100644 src/northbridge/via/cx700/agp.c delete mode 100644 src/northbridge/via/cx700/early_serial.c delete mode 100644 src/northbridge/via/cx700/early_smbus.c delete mode 100644 src/northbridge/via/cx700/lpc.c delete mode 100644 src/northbridge/via/cx700/northbridge.c delete mode 100644 src/northbridge/via/cx700/raminit.c delete mode 100644 src/northbridge/via/cx700/raminit.h delete mode 100644 src/northbridge/via/cx700/registers.h delete mode 100644 src/northbridge/via/cx700/reset.c delete mode 100644 src/northbridge/via/cx700/sata.c delete mode 100644 src/northbridge/via/cx700/usb.c delete mode 100644 src/northbridge/via/cx700/vga.c (limited to 'src/northbridge/via') diff --git a/src/northbridge/via/cx700/Kconfig b/src/northbridge/via/cx700/Kconfig deleted file mode 100644 index ec2c75ba1d..0000000000 --- a/src/northbridge/via/cx700/Kconfig +++ /dev/null @@ -1,55 +0,0 @@ -config NORTHBRIDGE_VIA_CX700 - bool - select NO_MMCONF_SUPPORT - select HAVE_DEBUG_RAM_SETUP - select HAVE_DEBUG_SMBUS - select HAVE_HARD_RESET - select IOAPIC - select SMP - select LATE_CBMEM_INIT - -# TODO: What should be the per-chipset default value here? -choice - prompt "Onboard graphics" - default CX700_VIDEO_MB_32MB - depends on NORTHBRIDGE_VIA_CX700 - -# TODO: Setting the amount of gfx memory is not yet supported in the source code. -config CX700_VIDEO_MB_OFF - bool "Disabled, 0KB" -config CX700_VIDEO_MB_8MB - bool "Enabled, 8MB" -config CX700_VIDEO_MB_16MB - bool "Enabled, 16MB" -config CX700_VIDEO_MB_32MB - bool "Enabled, 32MB" -config CX700_VIDEO_MB_64MB - bool "Enabled, 64MB" -config CX700_VIDEO_MB_128MB - bool "Enabled, 128MB" - -endchoice - -if NORTHBRIDGE_VIA_CX700 - -config VIDEO_MB - int - default 0 if CX700_VIDEO_MB_OFF - default 8 if CX700_VIDEO_MB_8MB - default 16 if CX700_VIDEO_MB_16MB - default 32 if CX700_VIDEO_MB_32MB - default 64 if CX700_VIDEO_MB_64MB - default 128 if CX700_VIDEO_MB_128MB - -config HPET_ADDRESS_OVERRIDE - def_bool y - -config HPET_ADDRESS - hex - default 0xfe800000 - -config HPET_MIN_TICKS - hex - default 0x90 - -endif diff --git a/src/northbridge/via/cx700/Makefile.inc b/src/northbridge/via/cx700/Makefile.inc deleted file mode 100644 index 76b68a937c..0000000000 --- a/src/northbridge/via/cx700/Makefile.inc +++ /dev/null @@ -1,26 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2009 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -ifeq ($(CONFIG_NORTHBRIDGE_VIA_CX700),y) - -ramstage-y += reset.c -ramstage-y += northbridge.c - -ramstage-y += agp.c -ramstage-y += lpc.c -ramstage-y += sata.c -ramstage-y += vga.c - -endif diff --git a/src/northbridge/via/cx700/agp.c b/src/northbridge/via/cx700/agp.c deleted file mode 100644 index d4f599e779..0000000000 --- a/src/northbridge/via/cx700/agp.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include - -/* This is the AGP 3.0 "bridge" @ Bus 0 Device 1 Func 0 */ - -static void agp_bridge_init(struct device *dev) -{ - - struct device *north_dev; - u8 reg8; - north_dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3324, 0); - - pci_write_config8(north_dev, 0xa0, 0x1); // Enable CPU Direct Access Frame Buffer - - pci_write_config8(north_dev, 0xa2, 0x4a); - - reg8 = pci_read_config8(north_dev, 0xc0); - reg8 |= 0x1; - pci_write_config8(north_dev, 0xc0, reg8); - - /* - * Since Internal Graphic already set to AGP3.0 compatible in its Capability Pointer - * We must set RAGP8X=1 B0D0F0 Rx84[3]=1 from backdoor register B0D0F0 RxB5[1:0]=11b - */ - north_dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x0324, 0); - reg8 = pci_read_config8(north_dev, 0xb5); - reg8 |= 0x3; - pci_write_config8(north_dev, 0xb5, reg8); - pci_write_config8(north_dev, 0x94, 0x20); - pci_write_config8(north_dev, 0x13, 0xd0); - - pci_write_config16(dev, 0x4, 0x0007); - - pci_write_config8(dev, 0x19, 0x01); - pci_write_config8(dev, 0x1a, 0x01); - pci_write_config8(dev, 0x1c, 0xe0); - pci_write_config8(dev, 0x1d, 0xe0); - pci_write_config16(dev, 0x1e, 0xa220); - - pci_write_config16(dev, 0x20, 0xdd00); - pci_write_config16(dev, 0x22, 0xdef0); - pci_write_config16(dev, 0x24, 0xa000); - pci_write_config16(dev, 0x26, 0xbff0); - - pci_write_config8(dev, 0x3e, 0x0c); - pci_write_config8(dev, 0x40, 0x8b); - pci_write_config8(dev, 0x41, 0x43); - pci_write_config8(dev, 0x42, 0x62); - pci_write_config8(dev, 0x43, 0x44); - pci_write_config8(dev, 0x44, 0x34); -} - -static struct device_operations agp_bridge_operations = { - .read_resources = DEVICE_NOOP, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .init = agp_bridge_init, - .scan_bus = pci_scan_bridge, -}; - -static const struct pci_driver agp_bridge_driver __pci_driver = { - .ops = &agp_bridge_operations, - .vendor = PCI_VENDOR_ID_VIA, - .device = 0xb198, -}; diff --git a/src/northbridge/via/cx700/early_serial.c b/src/northbridge/via/cx700/early_serial.c deleted file mode 100644 index 8f1800fcab..0000000000 --- a/src/northbridge/via/cx700/early_serial.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * Enable the serial devices on the VIA CX700 - */ - -#include - -static void cx700_writepnpaddr(u8 val) -{ - outb(val, 0x2e); - outb(val, 0xeb); -} - -static void cx700_writepnpdata(u8 val) -{ - outb(val, 0x2f); - outb(val, 0xeb); -} - -static void cx700_writesiobyte(u16 reg, u8 val) -{ - outb(val, reg); -} - -static void cx700_writesioword(u16 reg, u16 val) -{ - outw(val, reg); -} - -static void enable_cx700_serial(void) -{ - post_code(0x06); - - // WTH? - outb(0x03, 0x22); - - // Set UART1 I/O Base Address - pci_write_config8(PCI_DEV(0, 17, 0), 0xb4, 0x7e); - - // UART1 Enable - pci_write_config8(PCI_DEV(0, 17, 0), 0xb0, 0x10); - - // turn on pnp - cx700_writepnpaddr(0x87); - cx700_writepnpaddr(0x87); - // now go ahead and set up com1. - // set address - cx700_writepnpaddr(0x7); - cx700_writepnpdata(0x2); - // enable serial out - cx700_writepnpaddr(0x30); - cx700_writepnpdata(0x1); - // serial port 1 base address (FEh) - cx700_writepnpaddr(0x60); - cx700_writepnpdata(0xfe); - // serial port 1 IRQ (04h) - cx700_writepnpaddr(0x70); - cx700_writepnpdata(0x4); - // serial port 1 control - cx700_writepnpaddr(0xf0); - cx700_writepnpdata(0x2); - // turn of pnp - cx700_writepnpaddr(0xaa); - - // XXX This part should be fully taken care of by - // src/lib/uart8250.c:uart_init - - // set up reg to set baud rate. - cx700_writesiobyte(0x3fb, 0x80); - // Set 115 kb - cx700_writesioword(0x3f8, 1); - // Set 9.6 kb - // cx700_writesioword(0x3f8, 12) - // now set no parity, one stop, 8 bits - cx700_writesiobyte(0x3fb, 3); - // now turn on RTS, DRT - cx700_writesiobyte(0x3fc, 3); - // Enable interrupts - cx700_writesiobyte(0x3f9, 0xf); - // should be done. Dump a char for fun. - cx700_writesiobyte(0x3f8, 48); - - post_code(0x07); -} diff --git a/src/northbridge/via/cx700/early_smbus.c b/src/northbridge/via/cx700/early_smbus.c deleted file mode 100644 index 84a0de19e8..0000000000 --- a/src/northbridge/via/cx700/early_smbus.c +++ /dev/null @@ -1,240 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -// other bioses use this, too: -#define SMBUS_IO_BASE 0x0500 - -#define SMBHSTSTAT SMBUS_IO_BASE + 0x0 -#define SMBSLVSTAT SMBUS_IO_BASE + 0x1 -#define SMBHSTCTL SMBUS_IO_BASE + 0x2 -#define SMBHSTCMD SMBUS_IO_BASE + 0x3 -#define SMBXMITADD SMBUS_IO_BASE + 0x4 -#define SMBHSTDAT0 SMBUS_IO_BASE + 0x5 -#define SMBHSTDAT1 SMBUS_IO_BASE + 0x6 - -#define SMBBLKDAT SMBUS_IO_BASE + 0x7 -#define SMBSLVCTL SMBUS_IO_BASE + 0x8 -#define SMBTRNSADD SMBUS_IO_BASE + 0x9 -#define SMBSLVDATA SMBUS_IO_BASE + 0xa -#define SMLINK_PIN_CTL SMBUS_IO_BASE + 0xe -#define SMBUS_PIN_CTL SMBUS_IO_BASE + 0xf - -/* Define register settings */ -#define HOST_RESET 0xff -#define READ_CMD 0x01 // 1 in the 0 bit of SMBHSTADD states to READ - -#define SMBUS_TIMEOUT (100*1000*10) - -#define I2C_TRANS_CMD 0x40 -#define CLOCK_SLAVE_ADDRESS 0x69 - -#define SMBUS_DELAY() outb(0x80, 0x80) - -/* Internal functions */ -#if IS_ENABLED(CONFIG_DEBUG_SMBUS) -static void smbus_print_error(unsigned char host_status_register, int loops) -{ - /* Check if there actually was an error */ - if (host_status_register == 0x00 || host_status_register == 0x40 || - host_status_register == 0x42) - return; - printk(BIOS_ERR, "SMBus Error: %02x\n", host_status_register); - - if (loops >= SMBUS_TIMEOUT) { - printk(BIOS_ERR, "SMBus Timout\n"); - } - if (host_status_register & (1 << 4)) { - printk(BIOS_ERR, "Interrup/SMI# was Failed Bus Transaction\n"); - } - if (host_status_register & (1 << 3)) { - printk(BIOS_ERR, "Bus Error\n"); - } - if (host_status_register & (1 << 2)) { - printk(BIOS_ERR, "Device Error\n"); - } - if (host_status_register & (1 << 1)) { - /* This isn't a real error... */ - printk(BIOS_DEBUG, "Interrupt/SMI# was Successful Completion\n"); - } - if (host_status_register & (1 << 0)) { - printk(BIOS_ERR, "Host Busy\n"); - } -} -#endif - -static void smbus_wait_until_ready(void) -{ - int loops; - - loops = 0; - - /* Yes, this is a mess, but it's the easiest way to do it */ - while (((inb(SMBHSTSTAT) & 1) == 1) && (loops <= SMBUS_TIMEOUT)) { - SMBUS_DELAY(); - ++loops; - } -#if IS_ENABLED(CONFIG_DEBUG_SMBUS) - /* Some systems seem to have a flakey SMBus. No need to spew a lot of - * errors on those, once we know that SMBus access is principally - * working. - */ - smbus_print_error(inb(SMBHSTSTAT), loops); -#endif -} - -static void smbus_reset(void) -{ - outb(HOST_RESET, SMBHSTSTAT); -} - -/* Public functions */ -static void set_ics_data(unsigned char dev, int data, char len) -{ - smbus_reset(); - /* clear host data port */ - outb(0x00, SMBHSTDAT0); - SMBUS_DELAY(); - smbus_wait_until_ready(); - - /* read to reset block transfer counter */ - inb(SMBHSTCTL); - - /* fill blocktransfer array */ - if (dev == 0xd2) { - outb(0x0d, SMBBLKDAT); - outb(0x00, SMBBLKDAT); - outb(0x3f, SMBBLKDAT); - outb(0xcd, SMBBLKDAT); - outb(0x7f, SMBBLKDAT); - outb(0xbf, SMBBLKDAT); - outb(0x1a, SMBBLKDAT); - outb(0x2a, SMBBLKDAT); - outb(0x01, SMBBLKDAT); - outb(0x0f, SMBBLKDAT); - outb(0x0b, SMBBLKDAT); - outb(0x80, SMBBLKDAT); - outb(0x8d, SMBBLKDAT); - outb(0x9b, SMBBLKDAT); - } else { - outb(0x08, SMBBLKDAT); - outb(0xff, SMBBLKDAT); - outb(0x3f, SMBBLKDAT); - outb(0x00, SMBBLKDAT); - outb(0x00, SMBBLKDAT); - outb(0xff, SMBBLKDAT); - outb(0xff, SMBBLKDAT); - outb(0xff, SMBBLKDAT); - outb(0xff, SMBBLKDAT); - } - - outb(dev, SMBXMITADD); - outb(0, SMBHSTCMD); - outb(len, SMBHSTDAT0); - outb(0x74, SMBHSTCTL); - - SMBUS_DELAY(); - - smbus_wait_until_ready(); - - smbus_reset(); - -} - -static unsigned int get_spd_data(const struct mem_controller *ctrl, unsigned int dimm, - unsigned int offset) -{ - unsigned int val, addr; - - smbus_reset(); - - /* clear host data port */ - outb(0x00, SMBHSTDAT0); - SMBUS_DELAY(); - smbus_wait_until_ready(); - - /* Fetch the SMBus address of the SPD ROM from - * the ctrl struct in romstage.c in case they are at - * non-standard positions. - * SMBus Address shifted by 1 - */ - addr = (ctrl->channel0[dimm]) << 1; - - outb(addr | 0x1, SMBXMITADD); - outb(offset, SMBHSTCMD); - outb(0x48, SMBHSTCTL); - - SMBUS_DELAY(); - - smbus_wait_until_ready(); - - val = inb(SMBHSTDAT0); - smbus_reset(); - return val; -} - -static void enable_smbus(void) -{ - pci_devfn_t dev; - - /* The CX700 ISA Bridge (0x1106, 0x8324) is hardcoded to this location, - * no need to probe. - */ - dev = PCI_DEV(0, 17, 0); - - /* SMBus Clock Select: Divider fof 14.318MHz */ - pci_write_config8(dev, 0x94, 0x20); - - /* SMBus I/O Base, enable SMBus */ - pci_write_config16(dev, 0xd0, SMBUS_IO_BASE | 1); - - /* SMBus Clock from 128K Source, Enable SMBus Host Controller */ - pci_write_config8(dev, 0xd2, 0x05); - - /* Enable I/O decoding */ - pci_write_config16(dev, 0x04, 0x0003); - - /* Setup clock chips */ - set_ics_data(0xd2, 0, 14); - set_ics_data(0xd4, 0, 9); -} - -/* Debugging Function */ -#if IS_ENABLED(CONFIG_DEBUG_SMBUS) -static void dump_spd_data(const struct mem_controller *ctrl) -{ - int dimm, offset, regs; - unsigned int val; - - for (dimm = 0; dimm < DIMM_SOCKETS; dimm++) { - printk(BIOS_DEBUG, "SPD Data for DIMM %02x\n", dimm); - - val = get_spd_data(ctrl, dimm, 0); - if (val == 0xff) { - regs = 256; - } else if (val == 0x80) { - regs = 128; - } else { - printk(BIOS_DEBUG, "No DIMM present\n"); - regs = 0; - } - for (offset = 0; offset < regs; offset++) { - printk(BIOS_DEBUG, " Offset %02x = 0x%02x\n", - offset, get_spd_data(ctrl, dimm, offset)); - } - } -} -#else -#define dump_spd_data(ctrl) -#endif diff --git a/src/northbridge/via/cx700/lpc.c b/src/northbridge/via/cx700/lpc.c deleted file mode 100644 index 6a3c80c407..0000000000 --- a/src/northbridge/via/cx700/lpc.c +++ /dev/null @@ -1,301 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define ACPI_IO_BASE 0x400 - -static const unsigned char pci_irqs[4] = { 11, 11, 10, 10 }; - -static const unsigned char usb_pins[4] = { 'A', 'B', 'C', 'D' }; -static const unsigned char vga_pins[4] = { 'A', 'B', 'C', 'D' }; -static const unsigned char slot_pins[4] = { 'B', 'C', 'D', 'A' }; -static const unsigned char ac97_pins[4] = { 'B', 'C', 'D', 'A' }; - -static unsigned char *pin_to_irq(const unsigned char *pin) -{ - static unsigned char irqs[4]; - int i; - for (i = 0; i < 4; i++) - irqs[i] = pci_irqs[pin[i] - 'A']; - - return irqs; -} - -static void pci_routing_fixup(struct device *dev) -{ - printk(BIOS_DEBUG, "%s: device is %p\n", __FUNCTION__, dev); - - /* set up PCI IRQ routing */ - pci_write_config8(dev, 0x55, pci_irqs[0] << 4); - pci_write_config8(dev, 0x56, pci_irqs[1] | (pci_irqs[2] << 4)); - pci_write_config8(dev, 0x57, pci_irqs[3] << 4); - - /* Assigning IRQs */ - printk(BIOS_DEBUG, "Setting up USB interrupts.\n"); - pci_assign_irqs(0, 0x10, pin_to_irq(usb_pins)); - - printk(BIOS_DEBUG, "Setting up VGA interrupts.\n"); - pci_assign_irqs(1, 0x00, pin_to_irq(vga_pins)); - - printk(BIOS_DEBUG, "Setting up PCI slot interrupts.\n"); - pci_assign_irqs(2, 0x04, pin_to_irq(slot_pins)); - // more? - - printk(BIOS_DEBUG, "Setting up AC97 interrupts.\n"); - pci_assign_irqs(0x80, 0x1, pin_to_irq(ac97_pins)); -} - -/* - * Set up the power management capabilities directly into ACPI mode. This - * avoids having to handle any System Management Interrupts (SMI's) which I - * can't figure out how to do !!!! - */ - -static void setup_pm(struct device *dev) -{ - /* Debounce LID and PWRBTN# Inputs for 16ms. */ - pci_write_config8(dev, 0x80, 0x20); - - /* Set ACPI base address to IO ACPI_IO_BASE */ - pci_write_config16(dev, 0x88, ACPI_IO_BASE | 1); - - /* set ACPI irq to 9 */ - pci_write_config8(dev, 0x82, 0x49); - - /* Primary interupt channel, define wake events 0 = IRQ0 15 = IRQ15 1 = en. */ - pci_write_config16(dev, 0x84, 0x609a); - - /* SMI output level to low, 7.5us throttle clock */ - pci_write_config8(dev, 0x8d, 0x18); - - /* GP Timer Control 1s */ - pci_write_config8(dev, 0x93, 0x88); - - /* Power Well */ - pci_write_config8(dev, 0x94, 0x20); // 0x20?? - - /* 7 = stp to sust delay 1msec - * 6 = SUSST# Deasserted Before PWRGD for STD - */ - pci_write_config8(dev, 0x95, 0xc0); // 0xc1?? - - /* Disable GP2 & GP3 Timer */ - pci_write_config8(dev, 0x98, 0); - - /* GP2 Timer Counter */ - pci_write_config8(dev, 0x99, 0xfb); - /* GP3 Timer Counter */ - - /* Multi Function Select 1 */ - pci_write_config8(dev, 0xe4, 0x00); - - /* Multi Function Select 2 */ - pci_write_config8(dev, 0xe5, 0x41); //?? - - /* Enable ACPI access (and setup like award) */ - pci_write_config8(dev, 0x81, 0x84); - - /* Clear status events. */ - outw(0xffff, ACPI_IO_BASE + 0x00); - outw(0xffff, ACPI_IO_BASE + 0x20); - outw(0xffff, ACPI_IO_BASE + 0x28); - outl(0xffffffff, ACPI_IO_BASE + 0x30); - - /* Disable SCI on GPIO. */ - outw(0x0, ACPI_IO_BASE + 0x22); - - /* Disable SMI on GPIO. */ - outw(0x0, ACPI_IO_BASE + 0x24); - - /* Disable all global enable SMIs. */ - outw(0x0, ACPI_IO_BASE + 0x2a); - - /* All SMI off, both IDE buses ON, PSON rising edge. */ - outw(0x0, ACPI_IO_BASE + 0x2c); - - /* Primary activity SMI disable. */ - outl(0x0, ACPI_IO_BASE + 0x34); - - /* GP timer reload on none. */ - outl(0x0, ACPI_IO_BASE + 0x38); - - /* Disable extended IO traps. */ - outb(0x0, ACPI_IO_BASE + 0x42); - - /* SCI is generated for RTC/pwrBtn/slpBtn. */ - outw(0x0001, ACPI_IO_BASE + 0x04); - - /* Allow SLP# signal to assert LDTSTOP_L. - * Will work for C3 and for FID/VID change. - */ - outb(0x1, ACPI_IO_BASE + 0x11); -} - -static void cx700_set_lpc_registers(struct device *dev) -{ - unsigned char enables; - - printk(BIOS_DEBUG, "VIA CX700 LPC bridge init\n"); - - // enable the internal I/O decode - enables = pci_read_config8(dev, 0x6C); - enables |= 0x80; - pci_write_config8(dev, 0x6C, enables); - - // Map 4MB of FLASH into the address space - - // Set bit 6 of 0x40, because Award does it (IO recovery time) - // IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI - // interrupts can be properly marked as level triggered. - enables = pci_read_config8(dev, 0x40); - enables |= 0x44; - pci_write_config8(dev, 0x40, enables); - - /* DMA Line buffer control */ - enables = pci_read_config8(dev, 0x42); - enables |= 0xf0; - pci_write_config8(dev, 0x42, enables); - - /* I/O recovery time */ - pci_write_config8(dev, 0x4c, 0x44); - - /* ROM memory cycles go to LPC. */ - pci_write_config8(dev, 0x59, 0x80); - - /* Enable SM dynamic clock gating */ - pci_write_config8(dev, 0x5b, 0x01); - - /* Set Read Pass Write Control Enable */ - pci_write_config8(dev, 0x48, 0x0c); - - /* Set SM Misc Control: Enable Internal APIC . */ - enables = pci_read_config8(dev, 0x58); - enables |= 1 << 6; - pci_write_config8(dev, 0x58, enables); - enables = pci_read_config8(dev, 0x4d); - enables |= 1 << 3; - pci_write_config8(dev, 0x4d, enables); - - /* Set bit 3 of 0x4f to match award (use INIT# as CPU reset) */ - enables = pci_read_config8(dev, 0x4f); - enables |= 0x08; - pci_write_config8(dev, 0x4f, enables); - - /* enable KBC configuration */ - pci_write_config8(dev, 0x51, 0x1f); - - /* enable serial irq */ - pci_write_config8(dev, 0x52, 0x9); - - /* dma */ - pci_write_config8(dev, 0x53, 0x00); - - // Power management setup - setup_pm(dev); - - /* set up isa bus -- i/o recovery time, ROM write enable, extend-ale */ - pci_write_config8(dev, 0x40, 0x54); - - /* Enable HPET timer */ - pci_write_config32(dev, 0x68, (1 << 31) | (CONFIG_HPET_ADDRESS >> 8)); - -} - -static void cx700_read_resources(struct device *dev) -{ - struct resource *res; - - /* Make sure we call our childrens set/enable functions - these - * are not called unless this device has a resource to set. - */ - - pci_dev_read_resources(dev); - - res = new_resource(dev, 1); - res->base = 0x0UL; - res->size = 0x400UL; - res->limit = 0xffffUL; - res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, 3); /* IOAPIC */ - res->base = IO_APIC_ADDR; - res->size = 0x00001000; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; -} - -static void cx700_set_resources(struct device *dev) -{ - struct resource *resource; - resource = find_resource(dev, 1); - resource->flags |= IORESOURCE_STORED; - pci_dev_set_resources(dev); -} - -static void cx700_enable_resources(struct device *dev) -{ - /* Enable SuperIO decoding */ - pci_dev_enable_resources(dev); -} - -static void cx700_lpc_init(struct device *dev) -{ - cx700_set_lpc_registers(dev); - -#if IS_ENABLED(CONFIG_IOAPIC) -#define IO_APIC_ID 2 - setup_ioapic(VIO_APIC_VADDR, IO_APIC_ID); -#endif - - /* Initialize interrupts */ - pci_routing_fixup(dev); - /* make sure interupt controller is configured before keyboard init */ - setup_i8259(); - - /* Start the Real Time Clock */ - cmos_init(0); - - /* Initialize isa dma */ - isa_dma_init(); - - /* Initialize keyboard controller */ - pc_keyboard_init(NO_AUX_DEVICE); -} - -static struct device_operations cx700_lpc_ops = { - .read_resources = cx700_read_resources, - .set_resources = cx700_set_resources, - .enable_resources = cx700_enable_resources, - .init = cx700_lpc_init, - .scan_bus = scan_lpc_bus, -}; - -static const struct pci_driver lpc_driver __pci_driver = { - .ops = &cx700_lpc_ops, - .vendor = PCI_VENDOR_ID_VIA, - .device = 0x8324, -}; diff --git a/src/northbridge/via/cx700/northbridge.c b/src/northbridge/via/cx700/northbridge.c deleted file mode 100644 index ef887859c6..0000000000 --- a/src/northbridge/via/cx700/northbridge.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static void pci_domain_set_resources(struct device *dev) -{ - struct device *mc_dev; - u32 pci_tolm; - unsigned char reg; - unsigned long tomk, tolmk; - unsigned char rambits; - int idx; - - pci_tolm = find_pci_tolm(dev->link_list); - mc_dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3324, 0); - - rambits = pci_read_config8(mc_dev, 0x88); - rambits >>= 2; - - /* Get memory size and frame buffer from northbridge's registers. - * - * If register contains an invalid value we set frame buffer size to a - * default of 32M, but that probably won't happen. - */ - reg = pci_read_config8(mc_dev, 0xa1); - reg &= 0x70; - reg = reg >> 4; - - /* TOP 1M SMM Memory */ - if (reg == 0x0 || reg == 0x6 || reg == 0x7) - tomk = (((rambits << 6) - 32 - 1) * 1024); // Set frame buffer 32M for default - else - tomk = (((rambits << 6) - (4 << reg) - 1) * 1024); - - /* Compute the top of Low memory */ - tolmk = pci_tolm >> 10; - if (tolmk >= tomk) { - /* The PCI hole does does not overlap the memory. */ - tolmk = tomk; - tolmk -= 1024; // TOP 1M SM Memory - } - - set_late_cbmem_top(tolmk * 1024); - - /* Report the memory regions */ - idx = 10; - - /* TODO: Hole needed? Should this go elsewhere? */ - ram_resource(dev, idx++, 0, 640); /* first 640k */ - ram_resource(dev, idx++, 768, (tolmk - 768)); /* leave a hole for vga */ - assign_resources(dev->link_list); -} - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - struct device *dev; - u64 mmcfg; - - dev = dev_find_device(0x1106, 0x324b, 0); // 0:0x13.0 - if (!dev) - return current; - - // MMCFG not supported or not enabled. - if ((pci_read_config8(dev, 0x40) & 0xC0) != 0xC0) - return current; - - mmcfg = ((u64) pci_read_config8(dev, 0x41)) << 28; - if (!mmcfg) - return current; - - current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) current, mmcfg, 0x0, 0x0, 0xff); - - return current; -} - -static struct device_operations pci_domain_ops = { - .read_resources = pci_domain_read_resources, - .set_resources = pci_domain_set_resources, - .enable_resources = NULL, - .init = NULL, - .scan_bus = pci_domain_scan_bus, - .write_acpi_tables = acpi_write_hpet, -}; - -static void cpu_bus_init(struct device *dev) -{ - initialize_cpus(dev->link_list); -} - -static struct device_operations cpu_bus_ops = { - .read_resources = DEVICE_NOOP, - .set_resources = DEVICE_NOOP, - .enable_resources = DEVICE_NOOP, - .init = cpu_bus_init, - .scan_bus = 0, -}; - -static void enable_dev(struct device *dev) -{ - /* Our wonderful device model */ - if (dev->path.type == DEVICE_PATH_DOMAIN) { - dev->ops = &pci_domain_ops; - } else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { - dev->ops = &cpu_bus_ops; - } -} - -struct chip_operations northbridge_via_cx700_ops = { - CHIP_NAME("VIA CX700 Northbridge") - .enable_dev = enable_dev -}; diff --git a/src/northbridge/via/cx700/raminit.c b/src/northbridge/via/cx700/raminit.c deleted file mode 100644 index 682f3be16e..0000000000 --- a/src/northbridge/via/cx700/raminit.c +++ /dev/null @@ -1,1690 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include "registers.h" - -/* Debugging macros. */ -#if IS_ENABLED(CONFIG_DEBUG_RAM_SETUP) -#define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x) -#else -#define PRINTK_DEBUG(x...) -#endif - -#define RAM_COMMAND_NORMAL 0x0 -#define RAM_COMMAND_NOP 0x1 -#define RAM_COMMAND_PRECHARGE 0x2 -#define RAM_COMMAND_MRS 0x3 -#define RAM_COMMAND_CBR 0x4 - -#define HOSTCTRL PCI_DEV(0, 0, 2) -#define MEMCTRL PCI_DEV(0, 0, 3) - -#ifdef MEM_WIDTH_32BIT_MODE -#define SDRAM1X_RA_14 30 -#define SDRAM1X_RA_13 29 -#define SDRAM1X_RA_12 28 -#define SDRAM1X_RA_12_8bk 26 -#define SDRAM1X_CA_12 15 -#define SDRAM1X_CA_11 14 -#define SDRAM1X_CA_09 11 -#define SDRAM1X_CA_09_8bk 11 -#define SDRAM1X_BA1 13 -#define SDRAM1X_BA2_8bk 14 -#define SDRAM1X_BA1_8bk 13 -#else -#define SDRAM1X_RA_14 31 -#define SDRAM1X_RA_13 30 -#define SDRAM1X_RA_12 29 -#define SDRAM1X_RA_12_8bk 27 -#define SDRAM1X_CA_12 16 -#define SDRAM1X_CA_11 15 -#define SDRAM1X_CA_09 12 -#define SDRAM1X_CA_09_8bk 12 -#define SDRAM1X_BA1 14 -#define SDRAM1X_BA2_8bk 15 -#define SDRAM1X_BA1_8bk 14 -#endif - -#define MA_Column 0x06 -#define MA_Bank 0x08 -#define MA_Row 0x30 -#define MA_4_Bank 0x00 -#define MA_8_Bank 0x08 -#define MA_12_Row 0x00 -#define MA_13_Row 0x10 -#define MA_14_Row 0x20 -#define MA_15_Row 0x30 -#define MA_9_Column 0x00 -#define MA_10_Column 0x02 -#define MA_11_Column 0x04 -#define MA_12_Column 0x06 - -#define GET_SPD(i, val, tmp, reg) \ - do{ \ - val = 0; \ - tmp = 0; \ - for (i = 0; i < 2; i++) { \ - if (pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_REG_BASE + (i << 1)))) { \ - tmp = get_spd_data(ctrl, i, reg); \ - if (tmp > val) \ - val = tmp; \ - } \ - } \ - } while ( 0 ) - -#define REGISTERPRESET(bus,dev,fun,bdfspec) \ - { u8 j, reg; \ - for (j = 0; j < (sizeof((bdfspec))/sizeof(struct regmask)); j++) { \ - printk(BIOS_DEBUG, "Writing bus " #bus " dev " #dev " fun " #fun " register "); \ - printk(BIOS_DEBUG, "%02x", (bdfspec)[j].reg); \ - printk(BIOS_DEBUG, "\n"); \ - reg = pci_read_config8(PCI_DEV((bus), (dev), (fun)), (bdfspec)[j].reg); \ - reg &= (bdfspec)[j].mask; \ - reg |= (bdfspec)[j].val; \ - pci_write_config8(PCI_DEV((bus), (dev), (fun)), (bdfspec)[j].reg, reg); \ - } \ - } - -static const u8 Reg_Val[] = { -/* REG, VALUE */ - 0x70, 0x33, - 0x71, 0x11, - 0x72, 0x33, - 0x73, 0x11, - 0x74, 0x20, - 0x75, 0x2e, - 0x76, 0x64, - 0x77, 0x00, - 0x78, 0x44, - 0x79, 0xaa, - 0x7a, 0x33, - 0x7b, 0xaa, - 0x7c, 0x00, - 0x7e, 0x33, - 0x7f, 0x33, - 0x80, 0x44, - 0x81, 0x44, - 0x82, 0x44, - 0x83, 0x02, - 0x50, 0x88, - 0x51, 0x7b, - 0x52, 0x6f, - 0x53, 0x88, - 0x54, 0x0e, - 0x55, 0x00, - 0x56, 0x00, - 0x59, 0x00, - 0x5d, 0x72, - 0x5e, 0x88, - 0x5f, 0xc7, - 0x68, 0x01, -}; - -/* Host registers initial value */ -static const u8 Host_Reg_Val[] = { -/* REG, VALUE */ - 0x60, 0xff, - 0x61, 0xff, - 0x62, 0x0f, - 0x63, 0xff, - 0x64, 0xff, - 0x65, 0x0f, - 0x66, 0xff, - 0x67, 0x30, -}; - -static const u8 Mem_Reg_Init[] = { -/* REG, AND, OR */ - 0x50, 0x11, 0x66, - 0x51, 0x11, 0x66, - 0x52, 0x00, 0x11, - 0x53, 0x00, 0x0f, - 0x54, 0x00, 0x00, - 0x55, 0x00, 0x00, - 0x56, 0x00, 0x00, - 0x57, 0x00, 0x00, - 0x60, 0x00, 0x00, - 0x62, 0xf7, 0x08, - 0x65, 0x00, 0xd9, - 0x66, 0x00, 0x80, - 0x67, 0x00, 0x50, /* OR 0x00 ?? */ - 0x69, 0xf0, 0x00, - 0x6a, 0x00, 0x00, - 0x6d, 0xcf, 0xc0, - 0x6e, 0xff, 0x80, - 0x75, 0x0f, 0x40, - 0x77, 0x00, 0x00, - 0x80, 0x00, 0x00, - 0x81, 0x00, 0x00, - 0x82, 0x00, 0x00, - 0x83, 0x00, 0x00, - 0x84, 0x00, 0x00, - 0x85, 0x00, 0x00, - 0x86, 0xff, 0x2c, /* OR 0x28 if we don't want enable top 1M SM memory */ - 0x40, 0x00, 0x00, - 0x7c, 0x00, 0x00, - 0x7e, 0x00, 0x00, - 0xa4, 0xfe, 0x00, - 0xb0, 0x7f, 0x80, - 0xb1, 0x00, 0xaa, - 0xb4, 0xfd, 0x02, - 0xb8, 0xfe, 0x00, -}; - -static const u8 Dram_Driving_ODT_CTRL[] = { -/* REG, VALUE */ - 0xd6, 0xa8, - 0xd4, 0x80, - 0xd0, 0x88, - 0xd3, 0x01, - 0xd8, 0x00, - 0xda, 0x80, -}; - -#define Rank0_ODT 0x00 -#define Rank1_ODT 0x01 -#define Rank2_ODT 0x02 -#define Rank3_ODT 0x03 -#define NA_ODT 0x00 -#define NB_ODT_75ohm 0x00 -#define NB_ODT_150ohm 0x01 -#define DDR2_ODT_75ohm 0x20 -#define DDR2_ODT_150ohm 0x40 - -static const u8 ODT_TBL[] = { -/* RankMap, ODT Control Bits, DRAM & NB ODT setting */ - 0x01, ((NA_ODT << 6) | (NA_ODT << 4) | (NA_ODT << 2) | Rank0_ODT), (DDR2_ODT_150ohm | NB_ODT_75ohm), - 0x03, ((NA_ODT << 6) | (NA_ODT << 4) | (Rank0_ODT << 2) | Rank1_ODT), (DDR2_ODT_150ohm | NB_ODT_75ohm), - 0x04, ((NA_ODT << 6) | (Rank2_ODT << 4) | (NA_ODT << 2) | NA_ODT), (DDR2_ODT_150ohm | NB_ODT_75ohm), - 0x05, ((NA_ODT << 6) | (Rank0_ODT << 4) | (NA_ODT << 2) | Rank2_ODT), (DDR2_ODT_75ohm | NB_ODT_150ohm), - 0x07, ((NA_ODT << 6) | (Rank0_ODT << 4) | (Rank2_ODT << 2) | Rank2_ODT), (DDR2_ODT_75ohm | NB_ODT_150ohm), - 0x0c, ((Rank2_ODT << 6) | (Rank3_ODT << 4) | (NA_ODT << 2) | NA_ODT), (DDR2_ODT_150ohm | NB_ODT_75ohm), - 0x0d, ((Rank0_ODT << 6) | (Rank0_ODT << 4) | (NA_ODT << 2) | Rank2_ODT), (DDR2_ODT_75ohm | NB_ODT_150ohm), - 0x0f, ((Rank0_ODT << 6) | (Rank0_ODT << 4) | (Rank2_ODT << 2) | Rank2_ODT), (DDR2_ODT_75ohm | NB_ODT_150ohm), -}; - -static const u8 DQS_DQ_TBL[] = { -/* RxE0: DRAM Timing DQS */ -/* RxE2: DRAM Timing DQ */ -/* RxE0, RxE2 */ - 0xee, 0xba, - 0xee, 0xba, - 0xcc, 0xba, - 0xcc, 0xba, -}; - -static const u8 Duty_Control_DDR2[] = { -/* RxEC, RxED, RxEE, RXEF */ - /* DDRII533 1~2 rank, DDRII400 */ - 0x84, 0x10, 0x00, 0x10, - /* DDRII533 3~4 rank */ - 0x44, 0x10, 0x00, 0x10, -}; - -static const u8 ChA_Clk_Phase_DDR2_Table[] = { -/* Rx91, Rx92, Rx93 */ - /* DDRII533 1 rank */ - 0x04, 0x05, 0x06, - /* DDRII533 2~4 rank */ - 0x04, 0x05, 0x05, - /* DDRII400 */ - 0x02, 0x04, 0x04, -}; - -static const u8 DQ_DQS_Table[] = { -/* REG, VALUE */ -/* DRAM DQ/DQS Output Delay Control */ - 0xdc, 0x65, - 0xdd, 0x01, - 0xde, 0xc0, -/* DRAM DQ/DQS input Capture Control */ - 0x78, 0x83, - 0x79, 0x83, - 0x7a, 0x00, -}; - -static const u8 DQSOChA_DDR2_Driving_Table[] = { -/* Rx70, Rx71 */ - /* DDRII533 1~2 rank */ - 0x00, 0x01, - /* DDRII533 3~4 rank */ - 0x03, 0x00, - /* DDRII400 1~2 rank */ - 0x00, 0x04, - /* DDRII400 3~4 rank */ - 0x00, 0x01, -}; - -/************************************************************************/ -/* Chipset Performance UP and other setting after DRAM Sizing Registers */ -/************************************************************************/ -static const u8 Dram_Table[] = { -/* REG, AND, OR */ - 0x60, 0xff, 0x03, - 0x66, 0xcf, 0x80, - 0x68, 0x00, 0x00, - 0x69, 0xfd, 0x03, - 0x6e, 0xff, 0x01, - 0x95, 0xff, 0x40, -}; - -static const u8 Host_Table[] = { -/* REG, AND, OR */ - 0x51, 0x81, 0x7a, - 0x55, 0xff, 0x06, - 0x5e, 0x00, 0x88, - 0x5d, 0xff, 0xb2, -}; - -static const u8 Init_Rank_Reg_Table[] = { - /* Rank Ending Address Registers */ - 0x40, 0x41, 0x42, 0x43, - /* Rank Beginning Address Registers */ - 0x48, 0x49, 0x4a, 0x4b, - /* Physical-to-Virtual Rank Mapping Registers */ - 0x54, 0x55, -}; - -static const u16 DDR2_MRS_table[] = { -/* CL: 2, 3, 4, 5 */ - 0x150, 0x1d0, 0x250, 0x2d0, /* BL = 4; Use 1X-bandwidth MA table to init DRAM */ - 0x158, 0x1d8, 0x258, 0x2d8, /* BL = 8; Use 1X-bandwidth MA table to init DRAM */ -}; - -#define MRS_DDR2_TWR2 ((0 << 15) | (0 << 20) | (1 << 12)) -#define MRS_DDR2_TWR3 ((0 << 15) | (1 << 20) | (0 << 12)) -#define MRS_DDR2_TWR4 ((0 << 15) | (1 << 20) | (1 << 12)) -#define MRS_DDR2_TWR5 ((1 << 15) | (0 << 20) | (0 << 12)) -static const u32 DDR2_Twr_table[] = { - MRS_DDR2_TWR2, - MRS_DDR2_TWR3, - MRS_DDR2_TWR4, - MRS_DDR2_TWR5, -}; - -static const u8 DQSI_Rate_Table[] = { - 8, /* DDRII 200 */ - 8, /* DDRII 266 */ - 8, /* DDRII 333 */ - 7, /* DDRII 400 */ - 8, /* DDRII 533 */ - 8, /* DDRII 666 */ -}; - -static const u8 REFC_Table[] = { - 0x65, 0x32, /* DDRII 100 */ - 0x86, 0x43, /* DDRII 266 */ - 0xa8, 0x54, /* DDRII 333 */ - 0xca, 0x65, /* DDRII 400 */ - 0xca, 0x86, /* DDRII 533 */ - 0xca, 0xa8, /* DDRII 666 */ -}; - -static void do_ram_command(const struct mem_controller *ctrl, u8 command) -{ - u8 reg; - - reg = pci_read_config8(MEMCTRL, 0x6b); - reg &= 0xf8; /* Clear bits 2-0. */ - reg |= command; - pci_write_config8(MEMCTRL, 0x6b, reg); - - PRINTK_DEBUG(" Sending RAM command 0x%02x\n", reg); -} - -// TODO factor out to another file -static void c7_cpu_setup(const struct mem_controller *ctrl) -{ - u8 size, i; - size = sizeof(Reg_Val) / sizeof(Reg_Val[0]); - for (i = 0; i < size; i += 2) - pci_write_config8(HOSTCTRL, Reg_Val[i], Reg_Val[i + 1]); -} - -static void ddr_detect(const struct mem_controller *ctrl) -{ - /* FIXME: Only supports 2 ranks per DIMM */ - u8 val, rsize, dimm; - u8 nrank = 0; - u8 ndimm = 0; - u8 rmap = 0; - for (dimm = 0; dimm < DIMM_SOCKETS; dimm++) { - val = get_spd_data(ctrl, dimm, 0); - if ((val == 0x80) || (val == 0xff)) { - ndimm++; - rsize = get_spd_data(ctrl, dimm, SPD_RANK_SIZE); - /* unit is 128M */ - rsize = (rsize << 3) | (rsize >> 5); - val = - get_spd_data(ctrl, dimm, - SPD_MOD_ATTRIB_RANK) & SPD_MOD_ATTRIB_RANK_NUM_MASK; - switch (val) { - case 1: - pci_write_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK_1 + (dimm << 1)), - rsize); - rmap |= (1 << ((dimm << 1) + 1)); - nrank++; - case 0: - pci_write_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK_0 + (dimm << 1)), - rsize); - rmap |= (1 << (dimm << 1)); - nrank++; - } - } - } - pci_write_config8(PCI_DEV(0, 0, 4), SCRATCH_DIMM_NUM, ndimm); - pci_write_config8(PCI_DEV(0, 0, 4), SCRATCH_RANK_NUM, nrank); - pci_write_config8(PCI_DEV(0, 0, 4), SCRATCH_RANK_MAP, rmap); -} - -static void sdram_set_safe_values(const struct mem_controller *ctrl) -{ - /* The purpose of this function is to set initial values for the dram - * size and timings. It will be replaced with the SPD based function - * once the RAM commands are working with these values. - */ - u8 regs, val, t, dimm; - u32 spds, tmp; - - regs = pci_read_config8(MEMCTRL, 0x6c); - if (regs & (1 << 6)) - printk(BIOS_DEBUG, "DDR2 Detected.\n"); - else - die("ERROR: DDR1 memory detected but not supported by coreboot.\n"); - - /* Enable DDR2 */ - regs |= (1 << 7); - pci_write_config8(MEMCTRL, 0x6c, regs); - - /* SPD 5 # of ranks */ - pci_write_config8(MEMCTRL, 0x6d, 0xc0); - - /**********************************************/ - /* Set DRAM Freq (DDR2 533) */ - /**********************************************/ - /* SPD 9 SDRAM Cycle Time */ - GET_SPD(dimm, spds, regs, 9); - - printk(BIOS_DEBUG, "\nDDRII "); - if (spds <= 0x3d) { - printk(BIOS_DEBUG, "533"); - val = DDRII_533; - t = 38; - } else if (spds <= 0x50) { - printk(BIOS_DEBUG, "400"); - val = DDRII_400; - t = 50; - } else if (spds <= 0x60) { - printk(BIOS_DEBUG, "333"); - val = DDRII_333; - t = 60; - } else if (spds <= 0x75) { - printk(BIOS_DEBUG, "266"); - val = DDRII_266; - t = 75; - } else { - printk(BIOS_DEBUG, "200"); - val = DDRII_200; - t = 100; - } - /* To store DDRII frequence */ - pci_write_config8(PCI_DEV(0, 0, 4), SCRATCH_DRAM_FREQ, val); - - /* Manual reset and adjust DLL when DRAM change frequency - * This is a necessary sequence. - */ - udelay(2000); - regs = pci_read_config8(MEMCTRL, 0x90); - regs |= 0x7; - pci_write_config8(MEMCTRL, 0x90, regs); - udelay(2000); - regs = pci_read_config8(MEMCTRL, 0x90); - regs &= ~0x7; - regs |= val; - pci_write_config8(MEMCTRL, 0x90, regs); - udelay(2000); - regs = pci_read_config8(MEMCTRL, 0x6b); - regs |= 0xc0; - regs &= ~0x10; - pci_write_config8(MEMCTRL, 0x6b, regs); - udelay(1); - regs |= 0x10; - pci_write_config8(MEMCTRL, 0x6b, regs); - udelay(1); - regs &= ~0xc0; - pci_write_config8(MEMCTRL, 0x6b, regs); - regs = pci_read_config8(MEMCTRL, 0x6f); - regs |= 0x1; - pci_write_config8(MEMCTRL, 0x6f, regs); - - /**********************************************/ - /* Set DRAM Timing Setting (DDR2 533) */ - /**********************************************/ - /* SPD 9 18 23 25 CAS Latency NB3DRAM_REG62[2:0] */ - /* Read SPD byte 18 CAS Latency */ - GET_SPD(dimm, spds, regs, SPD_CAS_LAT); - printk(BIOS_DEBUG, "\nCAS Supported "); - if (spds & SPD_CAS_LAT_2) - printk(BIOS_DEBUG, "2 "); - if (spds & SPD_CAS_LAT_3) - printk(BIOS_DEBUG, "3 "); - if (spds & SPD_CAS_LAT_4) - printk(BIOS_DEBUG, "4 "); - if (spds & SPD_CAS_LAT_5) - printk(BIOS_DEBUG, "5 "); - if (spds & SPD_CAS_LAT_6) - printk(BIOS_DEBUG, "6"); - - /* We don't consider CAS = 6, because CX700 doesn't support it */ - printk(BIOS_DEBUG, "\n CAS:"); - if (spds & SPD_CAS_LAT_5) { - printk(BIOS_DEBUG, "Starting at CL5"); - val = 0x3; - /* See whether we can improve it */ - GET_SPD(dimm, tmp, regs, SPD_CAS_LAT_MIN_X_1); - if ((spds & SPD_CAS_LAT_4) && (tmp < 0x50)) { - printk(BIOS_DEBUG, "\n... going to CL4"); - val = 0x2; - } - GET_SPD(dimm, tmp, regs, SPD_CAS_LAT_MIN_X_2); - if ((spds & SPD_CAS_LAT_3) && (tmp < 0x50)) { - printk(BIOS_DEBUG, "\n... going to CL3"); - val = 0x1; - } - } else { - printk(BIOS_DEBUG, "Starting at CL4"); - val = 0x2; - GET_SPD(dimm, tmp, regs, SPD_CAS_LAT_MIN_X_1); - if ((spds & SPD_CAS_LAT_3) && (tmp < 0x50)) { - printk(BIOS_DEBUG, "\n... going to CL3"); - val = 0x1; - } - GET_SPD(dimm, tmp, regs, SPD_CAS_LAT_MIN_X_2); - if ((spds & SPD_CAS_LAT_2) && (tmp < 0x50)) { - printk(BIOS_DEBUG, "\n... going to CL2"); - val = 0x0; - } - } - regs = pci_read_config8(MEMCTRL, 0x62); - regs &= ~0x7; - regs |= val; - pci_write_config8(MEMCTRL, 0x62, regs); - - /* SPD 27 Trp NB3DRAM_REG64[3:2] */ - GET_SPD(dimm, spds, regs, SPD_TRP); - printk(BIOS_DEBUG, "\nTrp %d", spds); - spds >>= 2; - for (val = 2; val <= 5; val++) { - if (spds <= (val * t / 10)) { - val = val - 2; - break; - } - } - val <<= 2; - regs = pci_read_config8(MEMCTRL, 0x64); - regs &= ~0xc; - regs |= val; - pci_write_config8(MEMCTRL, 0x64, regs); - - /* SPD 29 Trcd NB3DRAM_REG64[7:6] */ - GET_SPD(dimm, spds, regs, SPD_TRCD); - printk(BIOS_DEBUG, "\nTrcd %d", spds); - spds >>= 2; - for (val = 2; val <= 5; val++) { - if (spds <= (val * t / 10)) { - val = val - 2; - break; - } - } - val <<= 6; - regs = pci_read_config8(MEMCTRL, 0x64); - regs &= ~0xc0; - regs |= val; - pci_write_config8(MEMCTRL, 0x64, regs); - - /* SPD 30 Tras NB3DRAM_REG62[7:4] */ - GET_SPD(dimm, spds, regs, SPD_TRAS); - printk(BIOS_DEBUG, "\nTras %d", spds); - for (val = 5; val <= 20; val++) { - if (spds <= (val * t / 10)) { - val = val - 5; - break; - } - } - val <<= 4; - regs = pci_read_config8(MEMCTRL, 0x62); - regs &= ~0xf0; - regs |= val; - pci_write_config8(MEMCTRL, 0x62, regs); - - /* SPD 42 SPD 40 Trfc NB3DRAM_REG61[5:0] */ - GET_SPD(dimm, spds, regs, SPD_TRFC); - printk(BIOS_DEBUG, "\nTrfc %d", spds); - tmp = spds; - GET_SPD(dimm, spds, regs, SPD_EX_TRC_TRFC); - if (spds & 0x1) - tmp += 256; - if (spds & 0xe) - tmp++; - for (val = 8; val <= 71; val++) { - if (tmp <= (val * t / 10)) { - val = val - 8; - break; - } - } - regs = pci_read_config8(MEMCTRL, 0x61); - regs &= ~0x3f; - regs |= val; - pci_write_config8(MEMCTRL, 0x61, regs); - - /* SPD 28 Trrd NB3DRAM_REG63[7:6] */ - GET_SPD(dimm, spds, regs, SPD_TRRD); - for (val = 2; val <= 5; val++) { - if (spds <= (val * t / 10)) { - val = val - 2; - break; - } - } - val <<= 6; - printk(BIOS_DEBUG, "\nTrrd val = 0x%x", val); - regs = pci_read_config8(MEMCTRL, 0x63); - regs &= ~0xc0; - regs |= val; - pci_write_config8(MEMCTRL, 0x63, regs); - - /* SPD 36 Twr NB3DRAM_REG61[7:6] */ - GET_SPD(dimm, spds, regs, SPD_TWR); - for (val = 2; val <= 5; val++) { - if (spds <= (val * t / 10)) { - val = val - 2; - break; - } - } - val <<= 6; - printk(BIOS_DEBUG, "\nTwr val = 0x%x", val); - - regs = pci_read_config8(MEMCTRL, 0x61); - regs &= ~0xc0; - regs |= val; - pci_write_config8(MEMCTRL, 0x61, regs); - - /* SPD 37 Twtr NB3DRAM_REG63[1] */ - GET_SPD(dimm, spds, regs, SPD_TWTR); - spds >>= 2; - printk(BIOS_DEBUG, "\nTwtr 0x%x", spds); - if (spds <= (t * 2 / 10)) - val = 0; - else - val = 1; - val <<= 1; - printk(BIOS_DEBUG, "\nTwtr val = 0x%x", val); - - regs = pci_read_config8(MEMCTRL, 0x63); - regs &= ~0x2; - regs |= val; - pci_write_config8(MEMCTRL, 0x63, regs); - - /* SPD 38 Trtp NB3DRAM_REG63[3] */ - GET_SPD(dimm, spds, regs, SPD_TRTP); - spds >>= 2; - printk(BIOS_DEBUG, "\nTrtp 0x%x", spds); - if (spds <= (t * 2 / 10)) - val = 0; - else - val = 1; - val <<= 3; - printk(BIOS_DEBUG, "\nTrtp val = 0x%x", val); - - regs = pci_read_config8(MEMCTRL, 0x63); - regs &= ~0x8; - regs |= val; - pci_write_config8(MEMCTRL, 0x63, regs); - - /**********************************************/ - /* Set DRAM DRDY Setting */ - /**********************************************/ - /* Write slowest value to register */ - tmp = sizeof(Host_Reg_Val) / sizeof(Host_Reg_Val[0]); - for (val = 0; val < tmp; val += 2) - pci_write_config8(HOSTCTRL, Host_Reg_Val[val], Host_Reg_Val[val + 1]); - - /* F2_RX51[7]=0, disable DRDY timing */ - regs = pci_read_config8(HOSTCTRL, 0x51); - regs &= ~0x80; - pci_write_config8(HOSTCTRL, 0x51, regs); - - /**********************************************/ - /* Set DRAM BurstLength */ - /**********************************************/ - regs = pci_read_config8(MEMCTRL, 0x6c); - for (dimm = 0; dimm < DIMM_SOCKETS; dimm++) { - if (pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_REG_BASE + (dimm << 1)))) { - spds = get_spd_data(ctrl, dimm, 16); - if (!(spds & 0x8)) - break; - } - } - if (dimm == 2) - regs |= 0x8; - pci_write_config8(MEMCTRL, 0x6c, regs); - val = pci_read_config8(HOSTCTRL, 0x54); - val &= ~0x10; - if (dimm == 2) - val |= 0x10; - pci_write_config8(HOSTCTRL, 0x54, val); - - /**********************************************/ - /* Set DRAM Driving Setting */ - /**********************************************/ - /* DRAM Timing ODT */ - tmp = sizeof(Dram_Driving_ODT_CTRL) / sizeof(Dram_Driving_ODT_CTRL[0]); - for (val = 0; val < tmp; val += 2) - pci_write_config8(MEMCTRL, Dram_Driving_ODT_CTRL[val], - Dram_Driving_ODT_CTRL[val + 1]); - - regs = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_RANK_NUM); - val = pci_read_config8(MEMCTRL, 0xd5); - val &= ~0xaa; - switch (regs) { - case 3: - case 2: - val |= 0xa0; - break; - default: - val |= 0x80; - } - regs = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_DIMM_NUM); - if (regs == 1) - val |= 0xa; - pci_write_config8(MEMCTRL, 0xd5, val); - - regs = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_DIMM_NUM); - val = pci_read_config8(MEMCTRL, 0xd6); - val &= ~0x2; - if (regs == 1) - val |= 0x2; - pci_write_config8(MEMCTRL, 0xd6, val); - - regs = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_RANK_MAP); - tmp = sizeof(ODT_TBL) / sizeof(ODT_TBL[0]); - for (val = 0; val < tmp; val += 3) { - if (regs == ODT_TBL[val]) { - pci_write_config8(MEMCTRL, 0xd8, ODT_TBL[val + 1]); - /* Store DRAM & NB ODT setting in d0f4_Rxd8 */ - pci_write_config8(PCI_DEV(0, 0, 4), SCRATCH_DRAM_NB_ODT, ODT_TBL[val + 2]); - break; - } - } - - pci_write_config8(MEMCTRL, 0xd9, 0x0a); - regs = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_RANK_NUM); - regs--; - regs = regs << 1; - pci_write_config8(MEMCTRL, 0xe0, DQS_DQ_TBL[regs++]); - pci_write_config8(MEMCTRL, 0xe2, DQS_DQ_TBL[regs]); - - /* DRAM Timing CS */ - pci_write_config8(MEMCTRL, 0xe4, 0x66); - - /* DRAM Timing MAA */ - val = 0; - for (dimm = 0; dimm < DIMM_SOCKETS; dimm++) { - if (pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_REG_BASE + (dimm << 1)))) { - spds = get_spd_data(ctrl, dimm, SPD_PRI_WIDTH); - spds = 64 / spds; - if (pci_read_config8 - (PCI_DEV(0, 0, 4), (SCRATCH_REG_BASE + (dimm << 1) + 1))) - spds = spds << 1; - val += spds; - } - } - printk(BIOS_DEBUG, "\nchip #%d", val); - if (val > 18) - regs = 0xdb; - else - regs = 0x86; - pci_write_config8(MEMCTRL, 0xe8, regs); - - /* DRAM Timing MAB */ - pci_write_config8(MEMCTRL, 0xe9, 0x0); - - /* DRAM Timing DCLK VT8454C always 0x66 */ - pci_write_config8(MEMCTRL, 0xe6, 0xaa); - - /**********************************************/ - /* Set DRAM Duty Control */ - /**********************************************/ - regs = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_RANK_NUM); - switch (regs) { - case 1: - case 2: /* 1~2 rank */ - val = 0; - break; - case 3: - case 4: /* 3~4 rank */ - regs = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_DRAM_FREQ); - if (regs == DDRII_533) - val = 4; - else /* DDRII-400 */ - val = 0; - break; - } - regs = 0xec; - for (t = 0; t < 4; t++) { - pci_write_config8(MEMCTRL, regs, Duty_Control_DDR2[val]); - regs++; - val++; - } - - /**********************************************/ - /* Set DRAM Clock Control */ - /**********************************************/ - /* Write Data Phase */ - val = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_DRAM_FREQ); - regs = pci_read_config8(MEMCTRL, 0x75); - regs &= 0xf0; - switch (val) { - case DDRII_533: - pci_write_config8(MEMCTRL, 0x74, 0x07); - regs |= 0x7; - break; - case DDRII_400: - default: - pci_write_config8(MEMCTRL, 0x74, 0x05); - regs |= 0x5; - break; - } - pci_write_config8(MEMCTRL, 0x75, regs); - pci_write_config8(MEMCTRL, 0x76, 0x80); - - /* Clock Phase Control for FeedBack Mode */ - regs = pci_read_config8(MEMCTRL, 0x90); - pci_write_config8(MEMCTRL, 0x90, regs); - - regs = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_DRAM_FREQ); - switch (regs) { - case DDRII_533: - regs = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_RANK_NUM); - if (regs == 1) - val = 0; - else - val = 3; - break; - case DDRII_400: - default: - val = 6; - break; - } - regs = pci_read_config8(MEMCTRL, 0x91); - regs &= ~0xc0; - regs |= 0x80; - pci_write_config8(MEMCTRL, 0x91, regs); - regs = 0x91; - for (t = 0; t < 3; t++) { - dimm = pci_read_config8(MEMCTRL, regs); - dimm &= ~0x7; - dimm |= ChA_Clk_Phase_DDR2_Table[val]; - pci_write_config8(MEMCTRL, regs, dimm); - regs++; - val++; - } - - pci_write_config8(MEMCTRL, 0x97, 0x12); - pci_write_config8(MEMCTRL, 0x98, 0x33); - - regs = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_RANK_0); - val = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_RANK_2); - if (regs && val) - pci_write_config8(MEMCTRL, 0x9d, 0x00); - else - pci_write_config8(MEMCTRL, 0x9d, 0x0f); - - tmp = sizeof(DQ_DQS_Table) / sizeof(DQ_DQS_Table[0]); - for (val = 0; val < tmp; val += 2) - pci_write_config8(MEMCTRL, DQ_DQS_Table[val], DQ_DQS_Table[val + 1]); - regs = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_DRAM_FREQ); - if (regs == DDRII_533) - pci_write_config8(MEMCTRL, 0x7b, 0xa0); - else - pci_write_config8(MEMCTRL, 0x7b, 0x10); - - /***************************************************/ - /* Set necessary register before DRAM initialize */ - /***************************************************/ - tmp = sizeof(Mem_Reg_Init) / sizeof(Mem_Reg_Init[0]); - for (val = 0; val < tmp; val += 3) { - regs = pci_read_config8(MEMCTRL, Mem_Reg_Init[val]); - regs &= Mem_Reg_Init[val + 1]; - regs |= Mem_Reg_Init[val + 2]; - pci_write_config8(MEMCTRL, Mem_Reg_Init[val], regs); - } - regs = pci_read_config8(HOSTCTRL, 0x51); - regs &= 0xbf; // Clear bit 6 Disable Read Around Write - pci_write_config8(HOSTCTRL, 0x51, regs); - - regs = pci_read_config8(HOSTCTRL, 0x54); - t = regs >> 5; - val = pci_read_config8(HOSTCTRL, 0x57); - dimm = val >> 5; - if (t == dimm) - t = 0x0; - else - t = 0x1; - regs &= ~0x1; - regs |= t; - val &= ~0x1; - val |= t; - pci_write_config8(HOSTCTRL, 0x57, val); - - regs = pci_read_config8(HOSTCTRL, 0x51); - regs |= t; - pci_write_config8(HOSTCTRL, 0x51, regs); - - regs = pci_read_config8(MEMCTRL, 0x90); - regs &= 0x7; - val = 0; - if (regs < 0x2) - val = 0x80; - regs = pci_read_config8(MEMCTRL, 0x76); - regs &= 0x80; - regs |= val; - pci_write_config8(MEMCTRL, 0x76, regs); - - regs = pci_read_config8(MEMCTRL, 0x6f); - regs |= 0x10; - pci_write_config8(MEMCTRL, 0x6f, regs); - - /***************************************************/ - /* Find suitable DQS value for ChA and ChB */ - /***************************************************/ - // Set DQS output delay for Channel A - regs = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_DRAM_FREQ); - val = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_RANK_NUM); - switch (regs) { - case DDRII_533: - if (val < 2) - val = 0; - else - val = 2; - break; - case DDRII_400: - default: - if (val < 2) - val = 4; - else - val = 6; - break; - } - for (t = 0; t < 2; t++) - pci_write_config8(MEMCTRL, (0x70 + t), DQSOChA_DDR2_Driving_Table[val + t]); - // Set DQS output delay for Channel B - pci_write_config8(MEMCTRL, 0x72, 0x0); - - regs = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_RANK_0); - val = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_RANK_2); - if (regs && val) - pci_write_config8(MEMCTRL, 0x73, 0xfd); - else - pci_write_config8(MEMCTRL, 0x73, 0x01); -} - -static void sdram_set_registers(const struct mem_controller *ctrl) -{ - c7_cpu_setup(ctrl); - ddr_detect(ctrl); - sdram_set_safe_values(ctrl); -} - -static void step_20_21(const struct mem_controller *ctrl) -{ - u8 val; - - // Step 20 - udelay(200); - - val = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_DRAM_NB_ODT); - if (val & DDR2_ODT_150ohm) - read32((void *)0x102200); - else - read32((void *)0x102020); - - /* Step 21. Normal operation */ - printk(BIOS_SPEW, "RAM Enable 5: Normal operation\n"); - do_ram_command(ctrl, RAM_COMMAND_NORMAL); - udelay(3); -} - -static void step_2_19(const struct mem_controller *ctrl) -{ - u32 i; - u8 val; - - // Step 2 - val = pci_read_config8(MEMCTRL, 0x69); - val &= ~0x03; - pci_write_config8(MEMCTRL, 0x69, val); - - /* Step 3 Apply NOP. */ - printk(BIOS_SPEW, "RAM Enable 1: Apply NOP\n"); - do_ram_command(ctrl, RAM_COMMAND_NOP); - - udelay(15); - - // Step 4 - printk(BIOS_SPEW, "SEND: "); - read32(zeroptr); - printk(BIOS_SPEW, "OK\n"); - - // Step 5 - udelay(400); - - /* 6. Precharge all. Wait tRP. */ - printk(BIOS_SPEW, "RAM Enable 2: Precharge all\n"); - do_ram_command(ctrl, RAM_COMMAND_PRECHARGE); - - // Step 7 - printk(BIOS_SPEW, "SEND: "); - read32(zeroptr); - printk(BIOS_SPEW, "OK\n"); - - /* Step 8. Mode register set. */ - printk(BIOS_SPEW, "RAM Enable 4: Mode register set\n"); - do_ram_command(ctrl, RAM_COMMAND_MRS); //enable dll - - // Step 9 - printk(BIOS_SPEW, "SEND: "); - - val = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_DRAM_NB_ODT); - if (val & DDR2_ODT_150ohm) - read32((void *)0x102200); //DDR2_ODT_150ohm - else - read32((void *)0x102020); - printk(BIOS_SPEW, "OK\n"); - - // Step 10 - printk(BIOS_SPEW, "SEND: "); - read32((void *)0x800); - printk(BIOS_SPEW, "OK\n"); - - /* Step 11. Precharge all. Wait tRP. */ - printk(BIOS_SPEW, "RAM Enable 2: Precharge all\n"); - do_ram_command(ctrl, RAM_COMMAND_PRECHARGE); - - // Step 12 - printk(BIOS_SPEW, "SEND: "); - read32(zeroptr); - printk(BIOS_SPEW, "OK\n"); - - /* Step 13. Perform 8 refresh cycles. Wait tRC each time. */ - printk(BIOS_SPEW, "RAM Enable 3: CBR\n"); - do_ram_command(ctrl, RAM_COMMAND_CBR); - - /* JEDEC says only twice, do 8 times for posterity */ - // Step 16: Repeat Step 14 and 15 another 7 times - for (i = 0; i < 8; i++) { - // Step 14 - read32(zeroptr); - printk(BIOS_SPEW, "."); - - // Step 15 - udelay(100); - } - - /* Step 17. Mode register set. Wait 200us. */ - printk(BIOS_SPEW, "\nRAM Enable 4: Mode register set\n"); - - //safe value for now, BL = 8, WR = 4, CAS = 4 - do_ram_command(ctrl, RAM_COMMAND_MRS); - udelay(200); - - /* Use Single Chanel temporarily */ - val = pci_read_config8(MEMCTRL, 0x6c); - if (val & 0x8) { /* Burst Length = 8 */ - val = pci_read_config8(MEMCTRL, 0x62); - val &= 0x7; - i = DDR2_MRS_table[4 + val]; - } else { - val = pci_read_config8(MEMCTRL, 0x62); - val &= 0x7; - i = DDR2_MRS_table[val]; - } - - // Step 18 - val = pci_read_config8(MEMCTRL, 0x61); - val = val >> 6; - i |= DDR2_Twr_table[val]; - read32((void *)i); - - printk(BIOS_DEBUG, "MRS = %08x\n", i); - - udelay(15); - - // Step 19 - val = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_DRAM_NB_ODT); - if (val & DDR2_ODT_150ohm) - read32((void *)0x103e00); //EMRS OCD Default - else - read32((void *)0x103c20); -} - -static void sdram_set_vr(const struct mem_controller *ctrl, u8 num) -{ - u8 reg, val; - val = 0x54 + (num >> 1); - reg = pci_read_config8(MEMCTRL, val); - reg &= (0xf << (4 * (num & 0x1))); - reg |= (((0x8 | num) << 4) >> (4 * (num & 0x1))); - pci_write_config8(MEMCTRL, val, reg); -} -static void sdram_ending_addr(const struct mem_controller *ctrl, u8 num) -{ - u8 reg, val; - /* Set Ending Address */ - val = 0x40 + num; - reg = pci_read_config8(MEMCTRL, val); - reg += 0x10; - pci_write_config8(MEMCTRL, val, reg); - /* Set Beginning Address */ - val = 0x48 + num; - pci_write_config8(MEMCTRL, val, 0x0); -} - -static void sdram_clear_vr_addr(const struct mem_controller *ctrl, u8 num) -{ - u8 reg, val; - val = 0x54 + (num >> 1); - reg = pci_read_config8(MEMCTRL, val); - reg = ~(0x80 >> (4 * (num & 0x1))); - pci_write_config8(MEMCTRL, val, reg); - val = 0x40 + num; - reg = pci_read_config8(MEMCTRL, val); - reg -= 0x10; - pci_write_config8(MEMCTRL, val, reg); - val = 0x48 + num; - pci_write_config8(MEMCTRL, val, 0x0); -} - -/* Perform sizing DRAM by dynamic method */ -static void sdram_calc_size(const struct mem_controller *ctrl, u8 num) -{ - u8 ca, ra, ba, reg; - ba = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_FLAGS); - if (ba == 8) { - write8(zeroptr, 0x0d); - ra = read8(zeroptr); - write8((void *)(1 << SDRAM1X_RA_12_8bk), 0x0c); - ra = read8(zeroptr); - - write8(zeroptr, 0x0a); - ca = read8(zeroptr); - write8((void *)(1 << SDRAM1X_CA_09_8bk), 0x0c); - ca = read8(zeroptr); - - write8(zeroptr, 0x03); - ba = read8(zeroptr); - write8((void *)(1 << SDRAM1X_BA2_8bk), 0x02); - ba = read8(zeroptr); - write8((void *)(1 << SDRAM1X_BA1_8bk), 0x01); - ba = read8(zeroptr); - } else { - write8(zeroptr, 0x0f); - ra = read8(zeroptr); - write8((void *)(1 << SDRAM1X_RA_14), 0x0e); - ra = read8(zeroptr); - write8((void *)(1 << SDRAM1X_RA_13), 0x0d); - ra = read8(zeroptr); - write8((void *)(1 << SDRAM1X_RA_12), 0x0c); - ra = read8(zeroptr); - - write8(zeroptr, 0x0c); - ca = read8(zeroptr); - write8((void *)(1 << SDRAM1X_CA_12), 0x0b); - ca = read8(zeroptr); - write8((void *)(1 << SDRAM1X_CA_11), 0x0a); - ca = read8(zeroptr); - write8((void *)(1 << SDRAM1X_CA_09), 0x09); - ca = read8(zeroptr); - - write8(zeroptr, 0x02); - ba = read8(zeroptr); - write8((void *)(1 << SDRAM1X_BA1), 0x01); - ba = read8(zeroptr); - } - - if (ra < 10 || ra > 15) - die("bad RA"); - if (ca < 8 || ca > 12) - die("bad CA"); - if (ba < 1 || ba > 3) - die("bad BA"); - - /* Calculate MA type save to scratch register */ - reg = 0; - - switch (ra) { - case 12: - reg |= MA_12_Row; - break; - case 13: - reg |= MA_13_Row; - break; - case 14: - reg |= MA_14_Row; - break; - default: - reg |= MA_15_Row; - } - - switch (ca) { - case 9: - reg |= MA_9_Column; - break; - case 10: - reg |= MA_10_Column; - break; - case 11: - reg |= MA_11_Column; - break; - default: - reg |= MA_12_Column; - } - - switch (ba) { - case 3: - reg |= MA_8_Bank; - break; - default: - reg |= MA_4_Bank; - } - - pci_write_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK0_MA_REG + num), reg); - - if (ra >= 13) - pci_write_config8(PCI_DEV(0, 0, 4), SCRATCH_DRAM_256M_BIT, 1); - - /* Calculate rank size save to scratch register */ - ra = ra + ca + ba + 3 - 26; /* 1 unit = 64M */ - ra = 1 << ra; - pci_write_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK0_SIZE_REG + num), ra); -} - -static void sdram_enable(const struct mem_controller *ctrl) -{ - u8 reg8; - u8 val, i; - pci_devfn_t dev; - u8 dl, dh; - u32 quot; - - /* Init Present Bank */ - val = sizeof(Init_Rank_Reg_Table) / sizeof(Init_Rank_Reg_Table[0]); - for (i = 0; i < val; i++) - pci_write_config8(MEMCTRL, Init_Rank_Reg_Table[i], 0x0); - - /* Init other banks */ - for (i = 0; i < 4; i++) { - reg8 = pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK_0 + i)); - if (reg8) { - sdram_set_vr(ctrl, i); - sdram_ending_addr(ctrl, i); - step_2_19(ctrl); - step_20_21(ctrl); - sdram_clear_vr_addr(ctrl, i); - } - } - - if (IS_ENABLED(MEM_WIDTH_32BIT_MODE)) { - /********************************************************/ - /* Set Dram 32bit Mode */ - /********************************************************/ - reg8 = pci_read_config8(MEMCTRL, 0x6c); - reg8 |= 0x20; - pci_write_config8(MEMCTRL, 0x6c, reg8); - } - - /****************************************************************/ - /* Find the DQSI Low/High bound and save it to Scratch register */ - /****************************************************************/ - for (dl = 0; dl < 0x3f; dl += 2) { - reg8 = dl & 0x3f; - reg8 |= 0x80; /* Set Manual Mode */ - pci_write_config8(MEMCTRL, 0x77, reg8); - for (i = 0; i < 4; i++) { - reg8 = pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK_0 + i)); - if (reg8) { - sdram_set_vr(ctrl, i); - sdram_ending_addr(ctrl, i); - write32(zeroptr, 0x55555555); - write32((void *)4, 0x55555555); - udelay(15); - if (read32(zeroptr) != 0x55555555) - break; - if (read32((void *)4) != 0x55555555) - break; - write32(zeroptr, 0xaaaaaaaa); - write32((void *)4, 0xaaaaaaaa); - udelay(15); - if (read32(zeroptr) != 0xaaaaaaaa) - break; - if (read32((void *)4) != 0xaaaaaaaa) - break; - sdram_clear_vr_addr(ctrl, i); - } - } - if (i == 4) - break; - else - sdram_clear_vr_addr(ctrl, i); - } - printk(BIOS_DEBUG, "\nDQSI Low %08x", dl); - for (dh = dl; dh < 0x3f; dh += 2) { - reg8 = dh & 0x3f; - reg8 |= 0x80; /* Set Manual Mode */ - pci_write_config8(MEMCTRL, 0x77, reg8); - for (i = 0; i < 4; i++) { - reg8 = pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK_0 + i)); - if (reg8) { - sdram_set_vr(ctrl, i); - sdram_ending_addr(ctrl, i); - - write32(zeroptr, 0x55555555); - write32((void *)4, 0x55555555); - udelay(15); - if (read32(zeroptr) != 0x55555555) - break; - if (read32((void *)4) != 0x55555555) - break; - write32(zeroptr, 0xaaaaaaaa); - write32((void *)4, 0xaaaaaaaa); - udelay(15); - if (read32(zeroptr) != 0xaaaaaaaa) - break; - if (read32((void *)4) != 0xaaaaaaaa) - break; - sdram_clear_vr_addr(ctrl, i); - } - } - if (i != 4) { - sdram_clear_vr_addr(ctrl, i); - break; - } - } - printk(BIOS_DEBUG, "\nDQSI High %02x", dh); - pci_write_config8(PCI_DEV(0, 0, 4), SCRATCH_CHA_DQSI_LOW_REG, dl); - pci_write_config8(PCI_DEV(0, 0, 4), SCRATCH_CHA_DQSI_HIGH_REG, dh); - reg8 = pci_read_config8(MEMCTRL, 0X90) & 0X7; - val = DQSI_Rate_Table[reg8]; - quot = dh - dl; - quot = quot * val; - quot >>= 4; - val = quot + dl; - pci_write_config8(PCI_DEV(0, 0, 4), SCRATCH_ChA_DQSI_REG, val); - reg8 = val & 0x3f; - reg8 |= 0x80; - pci_write_config8(MEMCTRL, 0x77, reg8); - - /****************************************************************/ - /* Find out the lowest Bank Interleave and Set Register */ - /****************************************************************/ - dl = 2; - for (i = 0; i < 4; i++) { - reg8 = pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK_0 + i)); - if (reg8) { - reg8 = get_spd_data(ctrl, (i >> 1), 17); - sdram_set_vr(ctrl, i); - sdram_ending_addr(ctrl, i); - if (reg8 == 4) { - write8(zeroptr, 0x02); - val = read8(zeroptr); - write8((void *)(1 << SDRAM1X_BA1), 0x01); - val = read8(zeroptr); - } else { - write8(zeroptr, 0x03); - val = read8(zeroptr); - write8((void *)(1 << SDRAM1X_BA2_8bk), 0x02); - val = read8(zeroptr); - write8((void *)(1 << SDRAM1X_BA1_8bk), 0x01); - val = read8(zeroptr); - } - if (val < dl) - dl = val; - sdram_clear_vr_addr(ctrl, i); - } - } - dl <<= 6; - reg8 = pci_read_config8(MEMCTRL, 0x69); - reg8 &= ~0xc0; - reg8 |= dl; - pci_write_config8(MEMCTRL, 0x69, reg8); - - /****************************************************************/ - /* DRAM Sizing and Fill MA type */ - /****************************************************************/ - for (i = 0; i < 4; i++) { - val = pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK_0 + i)); - if (val) { - reg8 = get_spd_data(ctrl, (i >> 1), 17); - pci_write_config8(PCI_DEV(0, 0, 4), SCRATCH_FLAGS, reg8); - if (reg8 == 4) { - /* Use MA Type 3 for DRAM sizing */ - reg8 = pci_read_config8(MEMCTRL, 0x50); - reg8 &= 0x11; - reg8 |= 0x66; - pci_write_config8(MEMCTRL, 0x50, reg8); - pci_write_config8(MEMCTRL, 0x51, reg8); - } else { - /* Use MA Type 5 for DRAM sizing */ - reg8 = pci_read_config8(MEMCTRL, 0x50); - reg8 &= 0x11; - reg8 |= 0xaa; - pci_write_config8(MEMCTRL, 0x50, reg8); - pci_write_config8(MEMCTRL, 0x51, reg8); - reg8 = pci_read_config8(MEMCTRL, 0x53); - reg8 &= 0x0f; - reg8 |= 0x90; - pci_write_config8(MEMCTRL, 0x53, reg8); - } - sdram_set_vr(ctrl, i); - val = 0x40 + i; - reg8 = pci_read_config8(MEMCTRL, val); - /* max size 3G for new MA table */ - reg8 += 0x30; - pci_write_config8(MEMCTRL, val, reg8); - /* Set Beginning Address */ - val = 0x48 + i; - pci_write_config8(MEMCTRL, val, 0x0); - - sdram_calc_size(ctrl, i); - - /* Clear */ - val = 0x54 + (i >> 1); - reg8 = pci_read_config8(MEMCTRL, val); - reg8 = ~(0x80 >> (4 * (i & 0x1))); - pci_write_config8(MEMCTRL, val, reg8); - val = 0x40 + i; - reg8 = pci_read_config8(MEMCTRL, val); - reg8 -= 0x30; - pci_write_config8(MEMCTRL, val, reg8); - val = 0x48 + i; - pci_write_config8(MEMCTRL, val, 0x0); - - } - } - /* Clear MA Type */ - reg8 = pci_read_config8(MEMCTRL, 0x50); - reg8 &= 0x11; - pci_write_config8(MEMCTRL, 0x50, reg8); - pci_write_config8(MEMCTRL, 0x51, reg8); - reg8 = pci_read_config8(MEMCTRL, 0x6b); - reg8 &= ~0x08; - pci_write_config8(MEMCTRL, 0x6b, reg8); - - /****************************************************************/ - /* DRAM re-initialize for burst length */ - /****************************************************************/ - for (i = 0; i < 4; i++) { - reg8 = pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK_0 + i)); - if (reg8) { - sdram_set_vr(ctrl, i); - sdram_ending_addr(ctrl, i); - step_2_19(ctrl); - step_20_21(ctrl); - sdram_clear_vr_addr(ctrl, i); - } - } - - /****************************************************************/ - /* Set the MA Type */ - /****************************************************************/ - reg8 = pci_read_config8(MEMCTRL, 0x50); - reg8 &= 0x11; - pci_write_config8(MEMCTRL, 0x50, reg8); - - reg8 = pci_read_config8(MEMCTRL, 0x51); - reg8 &= 0x11; - pci_write_config8(MEMCTRL, 0x51, reg8); - - reg8 = pci_read_config8(MEMCTRL, 0x6b); - reg8 &= ~0x08; - pci_write_config8(MEMCTRL, 0x6b, reg8); - - for (i = 0; i < 4; i += 2) { - reg8 = pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK_0 + i)); - if (reg8) { - reg8 = pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK0_MA_REG + i)); - reg8 &= (MA_Bank + MA_Column); - val = pci_read_config8(MEMCTRL, 0x50); - if (i == 0) { - reg8 <<= 4; - val &= 0x1f; - } else - val &= 0xf1; - val |= reg8; - pci_write_config8(MEMCTRL, 0x50, val); - } - } - - /****************************************************************/ - /* Set Start and Ending Address */ - /****************************************************************/ - dl = 0; /* Begin Address */ - dh = 0; /* Ending Address */ - for (i = 0; i < 4; i++) { - reg8 = pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK_0 + i)); - if (reg8) { - reg8 = pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK0_SIZE_REG + i)); - if (reg8 == 0) - continue; - dh += reg8; - pci_write_config8(MEMCTRL, (0x40 + i), dh); - pci_write_config8(MEMCTRL, (0x48 + i), dl); - dl = dh; - } - } - dh <<= 2; - // F7_Rx57 Ending address mirror register - pci_write_config8(PCI_DEV(0, 0, 7), 0x57, dh); - dev = pci_locate_device(PCI_ID(0x1106, 0x324e), 0); - pci_write_config8(dev, 0x57, dh); - // LOW TOP Address - pci_write_config8(MEMCTRL, 0x88, dh); - pci_write_config8(MEMCTRL, 0x85, dh); - // also program vlink mirror - pci_write_config8(PCI_DEV(0, 0, 7), 0xe5, dh); - - /****************************************************************/ - /* Set Physical to Virtual Rank mapping */ - /****************************************************************/ - pci_write_config32(MEMCTRL, 0x54, 0x0); - for (i = 0; i < 4; i++) { - reg8 = pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK_0 + i)); - if (reg8) { - reg8 = pci_read_config8(MEMCTRL, (0x54 + (i >> 1))); - if (i & 0x1) { /* Odd Rank */ - reg8 &= 0xf0; - reg8 |= (0x8 | i); - } else { /* Even Rank */ - - reg8 &= 0x0f; - reg8 |= ((0x8 | i) << 4); - } - pci_write_config8(MEMCTRL, (0x54 + (i >> 1)), reg8); - } - } - - /****************************************************************/ - /* Set DRAM Refresh Counter */ - /****************************************************************/ - val = pci_read_config8(MEMCTRL, 0X90) & 0X7; - val <<= 1; - reg8 = pci_read_config8(PCI_DEV(0, 0, 4), SCRATCH_DRAM_256M_BIT); - if (reg8) - val++; - pci_write_config8(MEMCTRL, 0x6a, REFC_Table[val]); - - /****************************************************************/ - /* Chipset Performance UP and other setting after DRAM Sizing */ - /****************************************************************/ - /* Dram Registers */ - val = sizeof(Dram_Table) / sizeof(Dram_Table[0]); - for (i = 0; i < val; i += 3) { - reg8 = pci_read_config8(MEMCTRL, Dram_Table[i]); - reg8 &= Dram_Table[i + 1]; - reg8 |= Dram_Table[i + 2]; - pci_write_config8(MEMCTRL, Dram_Table[i], reg8); - } - - /* Host Registers */ - val = sizeof(Host_Table) / sizeof(Host_Table[0]); - for (i = 0; i < val; i += 3) { - reg8 = pci_read_config8(HOSTCTRL, Host_Table[i]); - reg8 &= Host_Table[i + 1]; - reg8 |= Host_Table[i + 2]; - pci_write_config8(HOSTCTRL, Host_Table[i], reg8); - } - - /* PM Registers */ -#ifdef SETUP_PM_REGISTERS - val = sizeof(PM_Table) / sizeof(PM_Table[0]); - for (i = 0; i < val; i += 3) { - reg8 = pci_read_config8(PCI_DEV(0, 0, 4), PM_Table[i]); - reg8 &= PM_Table[i + 1]; - reg8 |= PM_Table[i + 2]; - pci_write_config8(PCI_DEV(0, 0, 4), PM_Table[i], reg8); - } -#endif - pci_write_config8(HOSTCTRL, 0x5d, 0xb2); - - /****************************************************************/ - /* UMA registers for N-series projects */ - /****************************************************************/ - - /* Manual setting frame buffer bank */ - for (i = 0; i < 4; i++) { - reg8 = pci_read_config8(PCI_DEV(0, 0, 4), (SCRATCH_RANK_0 + i)); - if (reg8) - val = i; - } - pci_write_config8(MEMCTRL, 0xb0, val); - reg8 = 0x40; // Frame buffer size 64M - reg8 |= 0x80; // VGA Enable - reg8 |= 0x0a; // A[31:28] = 1010b - pci_write_config8(MEMCTRL, 0xa1, reg8); - -#ifdef ECC - // Clear Ecc - outl(0x80000180, 0xcf8); - outb(0xff, 0xcfc); - // Enable Ecc - outl(0x80000188, 0xcf8); - outb(0xcf, 0xcfc); - - reg8 = pci_read_config8(PCI_DEV(0, 0, 0), 0xa5); - reg8 |= 0x10; - pci_write_config8(PCI_DEV(0, 0, 0), 0xa5, reg8); - - reg8 = pci_read_config8(PCI_DEV(0, 0, 0), 0x91); - reg8 |= 0x20; - pci_write_config8(PCI_DEV(0, 0, 0), 0x91, reg8); -#endif - - static const struct regmask { - u8 reg; - u8 mask; - u8 val; - } b0d1f0[] = { - { 0x40, 0x00, 0x8b}, - { 0x41, 0x80, 0x43}, - { 0x42, 0x00, 0x62}, - { 0x43, 0x00, 0x44}, - { 0x44, 0x00, 0x34}, - { 0x45, 0x00, 0x72} - }, b0d0f3[] = { - { 0x53, 0xf0, 0x0f}, - { 0x60, 0x00, 0x03}, - { 0x65, 0x00, 0xd9}, - { 0x66, 0x00, 0x80}, - { 0x67, 0x00, 0x00}, - { 0x68, 0x00, 0x01}, - { 0x69, 0xe0, 0x03}, - { 0x6b, 0x00, 0x10}, - { 0x6c, 0xc1, 0x08}, - { 0x6e, 0x00, 0x89}, - { 0x6f, 0x00, 0x51}, - { 0x75, ~0x40, 0x40}, - { 0x76, 0x8f, 0x00}, - { 0x7b, 0x00, 0xa0}, - { 0x86, 0x01, 0x24}, - { 0x86, 0x04, 0x29}, - { 0x8c, 0x00, 0x00}, - { 0x8d, 0x00, 0x00}, - { 0x95, ~0x40, 0x00}, - { 0xa2, 0x00, 0x44}, - { 0xb1, 0x00, 0xaa} - }, b0d0f0[] = { - { 0x4d, 0x00, 0x24}, - { 0x4f, 0x00, 0x01}, - { 0xbc, 0x00, 0x21}, - { 0xbe, 0x00, 0x00}, - { 0xbf, 0x7f, 0x80} - }, b0d17f0[] = { - { 0x40, ~0x01, 0x01}, // enable timer/counter shadow registers - { 0x67, ~0x03, 0x01}, - { 0x5b, ~0x01, 0x00}, - { 0x8d, ~0x02, 0x02}, - { 0x97, 0x7f, 0x00}, - { 0xd2, ~0x18, 0x00}, - { 0xe2, ~0x36, 0x06}, - { 0xe4, 0x7f, 0x00}, - { 0xe5, 0x00, 0x40}, - { 0xe6, 0x00, 0x20}, - { 0xe7, 0x2f, 0xc0}, - { 0xec, ~0x08, 0x00} - }, b0d17f7[] = { - { 0x4e, 0x7f, 0x80}, - { 0x4f, ~(1 << 6), 1 << 6 }, /* PG_CX700: 14.1.1 enable P2P Bridge Header for External PCI Bus */ - { 0x74, ~0x00, 0x04}, /* PG_CX700: 14.1.2 APIC FSB directly up to snmic, not on pci */ - { 0x7c, ~0x00, 0x02}, /* PG_CX700: 14.1.1 APIC FSB directly up to snmic, not on pci */ - { 0xe6, 0x0, 0x04} // MSI post - }, b0d19f0[] = { /* P2PE */ - { 0x42, ~0x08, 0x08}, // Disable HD Audio, - { 0x40, 0x3f, 0x80} // 14.1.3.1.1 of the PG: extended cfg mode for pcie. enable capability, but don't activate - }, b0d0f2[] = { - { 0x50, ~0x40, 0x88}, - { 0x51, 0x80, 0x7b}, - { 0x52, 0x90, 0x6f}, - { 0x53, 0x00, 0x88}, - { 0x54, 0xe4, 0x16}, - { 0x55, 0xf2, 0x04}, - { 0x56, 0x0f, 0x00}, - { 0x57, ~0x04, 0x00}, - { 0x5d, 0x00, 0xb2}, - { 0x5e, 0x00, 0x88}, - { 0x5f, 0x00, 0xc7}, - { 0x5c, 0x00, 0x01} - }; - - REGISTERPRESET(0, 0, 0, b0d0f0); - REGISTERPRESET(0, 0, 2, b0d0f2); - REGISTERPRESET(0, 0, 3, b0d0f3); - REGISTERPRESET(0, 1, 0, b0d1f0); - REGISTERPRESET(0, 17, 0, b0d17f0); - REGISTERPRESET(0, 17, 7, b0d17f7); - REGISTERPRESET(0, 19, 0, b0d19f0); -} diff --git a/src/northbridge/via/cx700/raminit.h b/src/northbridge/via/cx700/raminit.h deleted file mode 100644 index 3da7e2c627..0000000000 --- a/src/northbridge/via/cx700/raminit.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef RAMINIT_H -#define RAMINIT_H - -#define DIMM_SOCKETS 2 - -struct mem_controller { - u16 channel0[DIMM_SOCKETS]; -}; -#endif diff --git a/src/northbridge/via/cx700/registers.h b/src/northbridge/via/cx700/registers.h deleted file mode 100644 index f92bfd9614..0000000000 --- a/src/northbridge/via/cx700/registers.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __VIA_CX700_REGISTERS_H__ -#define __VIA_CX700_REGISTERS_H__ - -/* CX700 has 48 bytes of scratch registers in D0F4 starting at Reg. 0xd0 */ -#define SCRATCH_REG_BASE 0xd0 -#define SCRATCH_RANK_0 0xd0 -#define SCRATCH_RANK_1 0xd1 -#define SCRATCH_RANK_2 0xd2 -#define SCRATCH_RANK_3 0xd3 -#define SCRATCH_DIMM_NUM 0xd4 -#define SCRATCH_RANK_NUM 0xd5 -#define SCRATCH_RANK_MAP 0xd6 -#define SCRATCH_DRAM_FREQ 0xd7 -#define SCRATCH_DRAM_NB_ODT 0xd8 -#define SCRATCH_RANK0_SIZE_REG 0xe0 /* RxE0~RxE3 */ -#define SCRATCH_RANK0_MA_REG 0xe4 /* RxE4~RxE7 */ -#define SCRATCH_CHA_DQSI_LOW_REG 0xe8 -#define SCRATCH_CHA_DQSI_HIGH_REG 0xe9 -#define SCRATCH_ChA_DQSI_REG 0xea -#define SCRATCH_DRAM_256M_BIT 0xee -#define SCRATCH_FLAGS 0xef - -#define DDRII_666 0x5 -#define DDRII_533 0x4 -#define DDRII_400 0x3 -#define DDRII_333 0x2 -#define DDRII_266 0x1 -#define DDRII_200 0x0 - -#endif diff --git a/src/northbridge/via/cx700/reset.c b/src/northbridge/via/cx700/reset.c deleted file mode 100644 index 8a627590b6..0000000000 --- a/src/northbridge/via/cx700/reset.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include - -void do_hard_reset(void) -{ - outb((1 << 2) | (1 << 1), 0xcf9); -} diff --git a/src/northbridge/via/cx700/sata.c b/src/northbridge/via/cx700/sata.c deleted file mode 100644 index 0ac270d734..0000000000 --- a/src/northbridge/via/cx700/sata.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include - -/* IDE specific bits */ -#define IDE_MODE_REG 0x09 -#define IDE0_NATIVE_MODE (1 << 0) -#define IDE1_NATIVE_MODE (1 << 2) - -/* These are default addresses */ -#define IDE0_DATA_ADDR 0x1f0 -#define IDE0_CONTROL_ADDR 0x3f4 -#define IDE1_DATA_ADDR 0x170 -#define IDE1_CONTROL_ADDR 0x370 - -#define BUS_MASTER_ADDR 0xfc00 - -#define CHANNEL_ENABLE_REG 0x40 -#define ENABLE_IDE0 (1 << 0) -#define ENABLE_IDE1 (1 << 1) - -/* TODO: better user configuration */ -#define DISABLE_SATA 0 - -static void sata_init(struct device *dev) -{ - u8 reg8; - - printk(BIOS_DEBUG, "Configuring VIA SATA & EIDE Controller\n"); - - /* Class IDE Disk, instead of RAID controller */ - reg8 = pci_read_config8(dev, 0x45); - reg8 &= 0x7f; /* Sub Class Write Protect off */ - pci_write_config8(dev, 0x45, reg8); - pci_write_config8(dev, 0x0a, 0x01); - reg8 |= 0x80; /* Sub Class Write Protect on */ - pci_write_config8(dev, 0x45, reg8); - -#if defined(DISABLE_SATA) && (DISABLE_SATA == 1) - printk(BIOS_INFO, "Disabling SATA (Primary Channel)\n"); - /* Disable SATA channels */ - pci_write_config8(dev, 0x40, 0x00); -#else - pci_write_config8(dev, 0x40, 0x43); -#endif - - reg8 = pci_read_config8(dev, 0x6a); - reg8 |= 0x8; /* Mode Select set to Manual Mode */ - reg8 &= ~7; - reg8 |= 0x2; /* Manual setting to 50 ohm */ - - pci_write_config8(dev, 0x6a, reg8); - - reg8 = pci_read_config8(dev, 0x6b); - reg8 &= ~7; - reg8 |= 0x01; /* Autocomp of Termination */ - pci_write_config8(dev, 0x6b, reg8); - - /* Enable EIDE (secondary channel) even if SATA disabled */ - reg8 = pci_read_config8(dev, 0xc0); - reg8 |= 0x1; - pci_write_config8(dev, 0xc0, reg8); - - // Enable bus mastering, memory space acces, io space access - pci_write_config16(dev, 0x04, 0x0007); - - /* Set SATA base ports. */ - pci_write_config32(dev, 0x10, 0x01f1); - pci_write_config32(dev, 0x14, 0x03f5); - /* Set EIDE base ports. */ - pci_write_config32(dev, 0x18, 0x0171); - pci_write_config32(dev, 0x1c, 0x0375); - - /* SATA/EIDE Bus Master mode base address */ - pci_write_config32(dev, 0x20, BUS_MASTER_ADDR | 1); - - /* Enable read/write prefetch buffers */ - reg8 = pci_read_config8(dev, 0xc1); - reg8 |= 0x30; - pci_write_config8(dev, 0xc1, reg8); - - /* Set FIFO thresholds like */ - pci_write_config8(dev, 0xc3, 0x1); /* FIFO flushed when 1/2 full */ - - /* EIDE Sector Size */ - pci_write_config16(dev, 0xe8, 0x200); - - /* Some Miscellaneous Control */ - pci_write_config8(dev, 0x44, 0x7); - pci_write_config8(dev, 0x45, 0xaf); - pci_write_config8(dev, 0x46, 0x8); - - /* EIDE Configuration */ - reg8 = pci_read_config8(dev, 0xc4); - reg8 |= 0x10; - pci_write_config8(dev, 0xc4, reg8); - - pci_write_config8(dev, 0xc5, 0xc); - - /* Interrupt Line */ - reg8 = pci_read_config8(dev, 0x45); - reg8 &= ~(1 << 4); /* Interrupt Line Write Protect off */ - pci_write_config8(dev, 0x45, reg8); - - pci_write_config8(dev, 0x3c, 0x0e); /* Interrupt */ - - /* Set the drive timing control */ - pci_write_config16(dev, 0x48, 0x5d5d); - - /* Enable only compatibility mode. */ - reg8 = pci_read_config8(dev, 0x42); - reg8 &= ~0xa0; - pci_write_config8(dev, 0x42, reg8); - reg8 = pci_read_config8(dev, 0x42); - printk(BIOS_DEBUG, "Reg 0x42 read back as 0x%x\n", reg8); - - /* Support Staggered Spin-Up */ - reg8 = pci_read_config8(dev, 0xb9); - if ((reg8 & 0x8) == 0) { - printk(BIOS_DEBUG, "start OOB sequence on both drives\n"); - reg8 |= 0x30; - pci_write_config8(dev, 0xb9, reg8); - } -} - -static struct device_operations sata_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = sata_init, - .enable = 0, - .ops_pci = 0, -}; - -/* When the SATA controller is in IDE mode, the Device ID is 0x5324 */ -static const struct pci_driver northbridge_driver __pci_driver = { - .ops = &sata_ops, - .vendor = PCI_VENDOR_ID_VIA, - .device = 0x5324, -}; diff --git a/src/northbridge/via/cx700/usb.c b/src/northbridge/via/cx700/usb.c deleted file mode 100644 index 31d3340cca..0000000000 --- a/src/northbridge/via/cx700/usb.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include - -static void usb_init(struct device *dev) -{ - u32 reg32; - u8 reg8; - - /* USB Specification says the device must be Bus Master */ - printk(BIOS_DEBUG, "UHCI: Setting up controller.. "); - - reg32 = pci_read_config32(dev, PCI_COMMAND); - pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); - - reg8 = pci_read_config8(dev, 0xca); - reg8 |= (1 << 0); - pci_write_config8(dev, 0xca, reg8); - - printk(BIOS_DEBUG, "done.\n"); -} - -static struct device_operations usb_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = usb_init, - .enable = 0, - .ops_pci = 0, -}; - -static const struct pci_driver via_usb_driver __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_VIA, - .device = 0x3038, -}; diff --git a/src/northbridge/via/cx700/vga.c b/src/northbridge/via/cx700/vga.c deleted file mode 100644 index ee9c34b98a..0000000000 --- a/src/northbridge/via/cx700/vga.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "registers.h" -#include -#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) -#include -#endif - -/* PCI Domain 1 Device 0 Function 0 */ - -#define SR_INDEX 0x3c4 -#define SR_DATA 0x3c5 -#define CRTM_INDEX 0x3b4 -#define CRTM_DATA 0x3b5 -#define CRTC_INDEX 0x3d4 -#define CRTC_DATA 0x3d5 - -static int via_cx700_int15_handler(void) -{ - int res = 0; - u8 mem_speed; - -#define MEMORY_SPEED_66MHZ (0 << 4) -#define MEMORY_SPEED_100MHZ (1 << 4) -#define MEMORY_SPEED_133MHZ (1 << 4) -#define MEMORY_SPEED_200MHZ (3 << 4) // DDR200 -#define MEMORY_SPEED_266MHZ (4 << 4) // DDR266 -#define MEMORY_SPEED_333MHZ (5 << 4) // DDR333 -#define MEMORY_SPEED_400MHZ (6 << 4) // DDR400 -#define MEMORY_SPEED_533MHZ (7 << 4) // DDR533 -#define MEMORY_SPEED_667MHZ (8 << 4) // DDR667 - - const u8 memory_mapping[6] = { - MEMORY_SPEED_200MHZ, MEMORY_SPEED_266MHZ, - MEMORY_SPEED_333MHZ, MEMORY_SPEED_400MHZ, - MEMORY_SPEED_533MHZ, MEMORY_SPEED_667MHZ - }; - - printk(BIOS_DEBUG, "via_cx700_int15_handler\n"); - - switch(X86_EAX & 0xffff) { - case 0x5f00: /* VGA POST Initialization Signal */ - X86_EAX = (X86_EAX & 0xffff0000 ) | 0x5f; - res = 1; - break; - - case 0x5f01: /* Software Panel Type Configuration */ - X86_EAX = (X86_EAX & 0xffff0000 ) | 0x5f; - // panel type = 2 = 1024 * 768 - X86_ECX = (X86_ECX & 0xffffff00 ) | 2; - res = 1; - break; - - case 0x5f27: /* Boot Device Selection */ - X86_EAX = (X86_EAX & 0xffff0000 ) | 0x5f; - - X86_EBX = 0x00000000; // 0 -> default - X86_ECX = 0x00000000; // 0 -> default - // TV Layout - default - X86_EDX = (X86_EDX & 0xffffff00) | 0; - res = 1; - break; - - case 0x5f0b: /* Get Expansion Setting */ - X86_EAX = (X86_EAX & 0xffff0000 ) | 0x5f; - - X86_ECX = X86_ECX & 0xffffff00; // non-expansion - // regs->ecx = regs->ecx & 0xffffff00 | 1; // expansion - res = 1; - break; - - case 0x5f0f: /* VGA Post Completion */ - X86_EAX = (X86_EAX & 0xffff0000 ) | 0x5f; - res = 1; - break; - - case 0x5f18: - X86_EAX = (X86_EAX & 0xffff0000 ) | 0x5f; -#define UMA_SIZE_8MB (3 << 0) -#define UMA_SIZE_16MB (4 << 0) -#define UMA_SIZE_32MB (5 << 0) - - X86_EBX = (X86_EBX & 0xffff0000 ) | MEMORY_SPEED_533MHZ | UMA_SIZE_32MB; - - mem_speed = pci_read_config8(dev_find_slot(0, PCI_DEVFN(0, 4)), SCRATCH_DRAM_FREQ); - if (mem_speed > 5) - mem_speed = 5; - - X86_EBX |= memory_mapping[mem_speed]; - - res = 1; - break; - - default: - printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", - X86_EAX & 0xffff); - break; - } - return res; -} - -#ifdef UNUSED_CODE -static void write_protect_vgabios(void) -{ - struct device *dev; - - printk(BIOS_DEBUG, "write_protect_vgabios\n"); - - dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3324, 0); - if (dev) - pci_write_config8(dev, 0x80, 0xff); - - dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x7324, 0); - if (dev) - pci_write_config8(dev, 0x61, 0xff); -} -#endif - -static void vga_enable_console(void) -{ -#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) - /* Call VGA BIOS int10 function 0x4f14 to enable main console - * Epia-M does not always autosense the main console so forcing - * it on is good. - */ - - /* int#, EAX, EBX, ECX, EDX, ESI, EDI */ - realmode_interrupt(0x10, 0x4f14, 0x8003, 0x0001, 0x0000, 0x0000, 0x0000); -#endif -} - -static void vga_init(struct device *dev) -{ - u8 reg8; - - mainboard_interrupt_handlers(0x15, &via_cx700_int15_handler); - - //* - pci_write_config8(dev, 0x04, 0x07); - pci_write_config8(dev, 0x3e, 0x02); - pci_write_config8(dev, 0x0d, 0x40); - pci_write_config32(dev, 0x10, 0xa0000008); - pci_write_config32(dev, 0x14, 0xdd000000); - pci_write_config8(dev, 0x3c, 0x0b); - //*/ - - printk(BIOS_DEBUG, "Initializing VGA...\n"); - - pci_dev_init(dev); - - if (pci_read_config32(dev, PCI_ROM_ADDRESS) != 0xc0000) return; - - printk(BIOS_DEBUG, "Enable VGA console\n"); - vga_enable_console(); - - /* It's not clear if these need to be programmed before or after - * the VGA bios runs. Try both, clean up later */ - /* Set memory rate to 200MHz */ - outb(0x3d, CRTM_INDEX); - reg8 = inb(CRTM_DATA); - reg8 &= 0x0f; - reg8 |= (0x3 << 4); - outb(0x3d, CRTM_INDEX); - outb(reg8, CRTM_DATA); - - /* Set framebuffer size to 32mb */ - reg8 = (32 / 4); - outb(0x39, SR_INDEX); - outb(reg8, SR_DATA); -} - -static struct device_operations vga_operations = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = vga_init, - .ops_pci = 0, -}; - -static const struct pci_driver vga_driver __pci_driver = { - .ops = &vga_operations, - .vendor = PCI_VENDOR_ID_VIA, - .device = 0x3157, -}; -- cgit v1.2.3