From 15279a9696c70b82c2223264a505da9122f9aa7b Mon Sep 17 00:00:00 2001 From: Elyes HAOUAS Date: Thu, 28 Jul 2016 21:05:26 +0200 Subject: src/northbridge: Capitalize CPU, RAM and ROM Change-Id: I5aa27f06f82a8309afb6e06c9e462e5792aa9986 Signed-off-by: Elyes HAOUAS Reviewed-on: https://review.coreboot.org/15940 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/northbridge/via/cx700/lpc.c | 4 ++-- src/northbridge/via/vx800/lpc.c | 8 ++++---- src/northbridge/via/vx800/northbridge.c | 2 +- src/northbridge/via/vx800/uma_ram_setting.c | 2 +- src/northbridge/via/vx900/northbridge.c | 2 +- 5 files changed, 9 insertions(+), 9 deletions(-) (limited to 'src/northbridge/via') diff --git a/src/northbridge/via/cx700/lpc.c b/src/northbridge/via/cx700/lpc.c index ece05b10f3..2d7431628f 100644 --- a/src/northbridge/via/cx700/lpc.c +++ b/src/northbridge/via/cx700/lpc.c @@ -203,7 +203,7 @@ static void cx700_set_lpc_registers(struct device *dev) enables |= 1 << 3; pci_write_config8(dev, 0x4d, enables); - /* Set bit 3 of 0x4f to match award (use INIT# as cpu reset) */ + /* Set bit 3 of 0x4f to match award (use INIT# as CPU reset) */ enables = pci_read_config8(dev, 0x4f); enables |= 0x08; pci_write_config8(dev, 0x4f, enables); @@ -220,7 +220,7 @@ static void cx700_set_lpc_registers(struct device *dev) // Power management setup setup_pm(dev); - /* set up isa bus -- i/o recovery time, rom write enable, extend-ale */ + /* set up isa bus -- i/o recovery time, ROM write enable, extend-ale */ pci_write_config8(dev, 0x40, 0x54); /* Enable HPET timer */ diff --git a/src/northbridge/via/vx800/lpc.c b/src/northbridge/via/vx800/lpc.c index 25ceed12bb..00c199971c 100644 --- a/src/northbridge/via/vx800/lpc.c +++ b/src/northbridge/via/vx800/lpc.c @@ -269,7 +269,7 @@ static void vx800_sb_init(struct device *dev) enables |= 0x41; // pci_write_config8(dev, 0x58, enables); - /* Set bit 3 of 0x4f to match award (use INIT# as cpu reset) */ + /* Set bit 3 of 0x4f to match award (use INIT# as CPU reset) */ enables = pci_read_config8(dev, 0x4f); enables |= 0x08; pci_write_config8(dev, 0x4f, enables); @@ -283,7 +283,7 @@ static void vx800_sb_init(struct device *dev) // Power management setup setup_pm(dev); - /* set up isa bus -- i/o recovery time, rom write enable, extend-ale */ + /* set up isa bus -- i/o recovery time, ROM write enable, extend-ale */ pci_write_config8(dev, 0x40, 0x54); // Start the rtc @@ -329,14 +329,14 @@ static void southbridge_init(struct device *dev) S3_usb_wakeup(dev); S3_lid_wakeup(dev); -/* enable acpi cpu c3 state. (c2 state need not do anything.) +/* enable acpi CPU c3 state. (c2 state need not do anything.) #1 fadt->pm2_cnt_blk = 0x22;//to support cpu-c3 fadt->p_lvl2_lat = 0x50; //this is the coreboot source fadt->p_lvl3_lat = 0x320;// fadt->pm2_cnt_len = 1;//to support cpu-c3 #2 - ssdt? ->every cpu has a P_BLK address. set it to 0x10 (so that "Read Processor Level3 register(PMIORx15<7:0>) to enter C3 state"---VIA vx800 P SPEC ) + ssdt? ->every CPU has a P_BLK address. set it to 0x10 (so that "Read Processor Level3 register(PMIORx15<7:0>) to enter C3 state"---VIA vx800 P SPEC ) #3 write 0x17 in to PMIO=VX800_ACPI_IO_BASE + 0x26, following the describtion in the P-spec. 1 enable SLP# asserts in C3 state PMIORx26<1> =1 2 enable CPUSTP# asserts in C3 state; PMIORx26<2> =1 diff --git a/src/northbridge/via/vx800/northbridge.c b/src/northbridge/via/vx800/northbridge.c index 4925b53bb5..639132132f 100644 --- a/src/northbridge/via/vx800/northbridge.c +++ b/src/northbridge/via/vx800/northbridge.c @@ -70,7 +70,7 @@ static const struct pci_driver memctrl_driver __pci_driver = { static void pci_domain_set_resources(device_t dev) { /* - * the order is important to find the correct ram size. + * the order is important to find the correct RAM size. */ u8 ramregs[] = { 0x43, 0x42, 0x41, 0x40 }; device_t mc_dev; diff --git a/src/northbridge/via/vx800/uma_ram_setting.c b/src/northbridge/via/vx800/uma_ram_setting.c index dc3ab39d1b..1aa0967e26 100644 --- a/src/northbridge/via/vx800/uma_ram_setting.c +++ b/src/northbridge/via/vx800/uma_ram_setting.c @@ -168,7 +168,7 @@ void SetUMARam(void) Tmp = VIACONFIG_VGA_PCI_14; pci_write_config32(vga_dev, 0x14, Tmp); - //enable direct cpu frame buffer access + //enable direct CPU frame buffer access i = pci_read_config8(PCI_DEV(0, 0, 3), 0xa1); i = (i & 0xf0) | (VIACONFIG_VGA_PCI_10 >> 28); pci_write_config8(PCI_DEV(0, 0, 3), 0xa1, i); diff --git a/src/northbridge/via/vx900/northbridge.c b/src/northbridge/via/vx900/northbridge.c index 368ff8cb5f..32bb539812 100644 --- a/src/northbridge/via/vx900/northbridge.c +++ b/src/northbridge/via/vx900/northbridge.c @@ -259,7 +259,7 @@ static void vx900_set_resources(device_t dev) tolmk = MIN(full_tolmk, tomk); tolmk -= fbufk; ram_resource(dev, idx++, 0, 640); - printk(BIOS_SPEW, "System ram left: %dMB\n", tolmk >> 10); + printk(BIOS_SPEW, "System RAM left: %dMB\n", tolmk >> 10); /* FIXME: how can we avoid leaving this hole? * Leave a hole for VGA, 0xa0000 - 0xc0000 ?? */ /* TODO: VGA Memory hole can be disabled in SNMIC. Upper 64k of ROM seem -- cgit v1.2.3