From bd9548ba7ce670bd53013f089706bcfc91c95c77 Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Sun, 22 Jan 2017 21:17:09 +0100 Subject: nb/intel/nehalem: Clean nehalem.h Remove unused definitions, prototypes and macros moslty copied from gm45. Change-Id: I076e204885baec3d40f165785cf4ae4adc9154c5 Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/18370 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph Reviewed-by: Paul Menzel --- src/northbridge/intel/nehalem/nehalem.h | 289 -------------------------------- 1 file changed, 289 deletions(-) (limited to 'src/northbridge/intel') diff --git a/src/northbridge/intel/nehalem/nehalem.h b/src/northbridge/intel/nehalem/nehalem.h index ee8dd00a82..bc6bde2d5d 100644 --- a/src/northbridge/intel/nehalem/nehalem.h +++ b/src/northbridge/intel/nehalem/nehalem.h @@ -20,86 +20,8 @@ #ifndef __ASSEMBLER__ -#include - -extern unsigned char fake_vbt[4096]; - -typedef enum { - FSB_CLOCK_1067MHz = 0, - FSB_CLOCK_800MHz = 1, - FSB_CLOCK_667MHz = 2, -} fsb_clock_t; - -typedef enum { /* Steppings below B1 were pre-production, - conversion stepping A1 is... ? - We'll support B1, B2, B3, and conversion stepping A1. */ - STEPPING_A0 = 0, - STEPPING_A1 = 1, - STEPPING_A2 = 2, - STEPPING_A3 = 3, - STEPPING_B0 = 4, - STEPPING_B1 = 5, - STEPPING_B2 = 6, - STEPPING_B3 = 7, - STEPPING_CONVERSION_A1 = 9, -} stepping_t; - -typedef enum { - GMCH_GM45 = 0, - GMCH_GM47, - GMCH_GM49, - GMCH_GE45, - GMCH_GL40, - GMCH_GL43, - GMCH_GS40, - GMCH_GS45, - GMCH_PM45, - GMCH_UNKNOWN -} gmch_gfx_t; - -typedef enum { - MEM_CLOCK_533MHz = 0, - MEM_CLOCK_400MHz = 1, - MEM_CLOCK_333MHz = 2, - MEM_CLOCK_1067MT = 0, - MEM_CLOCK_800MT = 1, - MEM_CLOCK_667MT = 2, -} mem_clock_t; - -typedef enum { - DDR1 = 1, - DDR2 = 2, - DDR3 = 3, -} ddr_t; - -typedef enum { - CHANNEL_MODE_SINGLE, - CHANNEL_MODE_DUAL_ASYNC, - CHANNEL_MODE_DUAL_INTERLEAVED, -} channel_mode_t; - -typedef enum { /* as in DDR3 spd */ - CHIP_WIDTH_x4 = 0, - CHIP_WIDTH_x8 = 1, - CHIP_WIDTH_x16 = 2, - CHIP_WIDTH_x32 = 3, -} chip_width_t; - -typedef enum { /* as in DDR3 spd */ - CHIP_CAP_256M = 0, - CHIP_CAP_512M = 1, - CHIP_CAP_1G = 2, - CHIP_CAP_2G = 3, - CHIP_CAP_4G = 4, - CHIP_CAP_8G = 5, - CHIP_CAP_16G = 6, -} chip_capacity_t; - typedef struct { unsigned int CAS; - fsb_clock_t fsb_clock; - mem_clock_t mem_clock; - channel_mode_t channel_mode; unsigned int tRAS; unsigned int tRP; unsigned int tRCD; @@ -111,77 +33,23 @@ typedef struct { unsigned int tWL; } timings_t; -typedef struct { - unsigned int card_type; /* 0x0: unpopulated, - 0xa - 0xf: raw card type A - F */ - chip_width_t chip_width; - chip_capacity_t chip_capacity; - unsigned int page_size; /* of whole DIMM in Bytes (4096 or 8192) */ - unsigned int banks; - unsigned int ranks; - unsigned int rank_capacity_mb; /* per rank in Megabytes */ -} dimminfo_t; - /* The setup is one DIMM per channel, so there's no need to find a common timing setup between multiple chips (but chip and controller still need to be coordinated */ typedef struct { - stepping_t stepping; int txt_enabled; int cores; - gmch_gfx_t gfx_type; - int gs45_low_power_mode; /* low power mode of GMCH_GS45 */ int max_ddr2_mhz; int max_ddr3_mt; - fsb_clock_t max_fsb; int max_fsb_mhz; int max_render_mhz; int spd_type; timings_t selected_timings; - dimminfo_t dimms[2]; } sysinfo_t; -#define TOTAL_CHANNELS 2 -#define CHANNEL_IS_POPULATED(dimms, idx) (dimms[idx].card_type != 0) -#define CHANNEL_IS_CARDF(dimms, idx) (dimms[idx].card_type == 0xf) -#define IF_CHANNEL_POPULATED(dimms, idx) if (dimms[idx].card_type != 0) -#define FOR_EACH_CHANNEL(idx) \ - for (idx = 0; idx < TOTAL_CHANNELS; ++idx) -#define FOR_EACH_POPULATED_CHANNEL(dimms, idx) \ - FOR_EACH_CHANNEL(idx) IF_CHANNEL_POPULATED(dimms, idx) - -#define RANKS_PER_CHANNEL 4 /* Only two may be populated */ -#define IF_RANK_POPULATED(dimms, ch, r) \ - if (dimms[ch].card_type && ((r) < dimms[ch].ranks)) -#define FOR_EACH_RANK_IN_CHANNEL(r) \ - for (r = 0; r < RANKS_PER_CHANNEL; ++r) -#define FOR_EACH_POPULATED_RANK_IN_CHANNEL(dimms, ch, r) \ - FOR_EACH_RANK_IN_CHANNEL(r) IF_RANK_POPULATED(dimms, ch, r) -#define FOR_EACH_RANK(ch, r) \ - FOR_EACH_CHANNEL(ch) FOR_EACH_RANK_IN_CHANNEL(r) -#define FOR_EACH_POPULATED_RANK(dimms, ch, r) \ - FOR_EACH_RANK(ch, r) IF_RANK_POPULATED(dimms, ch, r) - -#define DDR3_MAX_CAS 18 - - -enum { - VCO_2666 = 4, - VCO_3200 = 0, - VCO_4000 = 1, - VCO_5333 = 2, -}; - #endif -/* Offsets of read/write training results in CMOS. - They will be restored upon S3 resumes. */ -#define CMOS_READ_TRAINING 0x80 /* 16 bytes */ -#define CMOS_WRITE_TRAINING 0x90 /* 16 bytes - (could be reduced to 10 bytes) */ - - #define DEFAULT_HECIBAR ((u8 *)0xfed17000) /* 4 KB per PCIe device */ @@ -235,20 +103,6 @@ enum { #define D1F0_VCCAP 0x104 #define D1F0_VC0RCTL 0x114 -/* - * Graphics frequencies - */ -#define GCFGC_PCIDEV PCI_DEV(0, 2, 0) -#define GCFGC_OFFSET 0xf0 -#define GCFGC_CR_SHIFT 0 -#define GCFGC_CR_MASK (0xf << GCFGC_CR_SHIFT) -#define GCFGC_CS_SHIFT 8 -#define GCFGC_CS_MASK (0xf << GCFGC_CS_SHIFT) -#define GCFGC_CD_SHIFT 12 -#define GCFGC_CD_MASK (0x1 << GCFGC_CD_SHIFT) -#define GCFGC_UPDATE_SHIFT 5 -#define GCFGC_UPDATE (0x1 << GCFGC_UPDATE_SHIFT) - /* * MCHBAR */ @@ -257,120 +111,6 @@ enum { #define MCHBAR16(x) *((volatile u16 *)(DEFAULT_MCHBAR + x)) #define MCHBAR32(x) *((volatile u32 *)(DEFAULT_MCHBAR + x)) -#define PMSTS_MCHBAR 0x0f14 /* Self refresh channel status */ -#define PMSTS_WARM_RESET (1 << 1) -#define PMSTS_BOTH_SELFREFRESH (1 << 0) - -#define CLKCFG_MCHBAR 0x0c00 -#define CLKCFG_FSBCLK_SHIFT 0 -#define CLKCFG_FSBCLK_MASK (7 << CLKCFG_FSBCLK_SHIFT) -#define CLKCFG_MEMCLK_SHIFT 4 -#define CLKCFG_MEMCLK_MASK (7 << CLKCFG_MEMCLK_SHIFT) -#define CLKCFG_UPDATE (1 << 12) - -#define SSKPD_MCHBAR 0x0c1c -#define SSKPD_CLK_SHIFT 0 -#define SSKPD_CLK_MASK (7 << SSKPD_CLK_SHIFT) - -#define DCC_MCHBAR 0x200 -#define DCC_NO_CHANXOR (1 << 10) -#define DCC_INTERLEAVED (1 << 1) -#define DCC_CMD_SHIFT 16 -#define DCC_CMD_MASK (7 << DCC_CMD_SHIFT) -#define DCC_CMD_NOP (1 << DCC_CMD_SHIFT) - /* For mode register mr0: */ -#define DCC_SET_MREG (3 << DCC_CMD_SHIFT) - /* For extended mode registers mr1 to mr3: */ -#define DCC_SET_EREG (4 << DCC_CMD_SHIFT) -#define DCC_SET_EREG_SHIFT 21 -#define DCC_SET_EREG_MASK (DCC_CMD_MASK | (3 << DCC_SET_EREG_SHIFT)) -#define DCC_SET_EREGx(x) ((DCC_SET_EREG | \ - ((x - 1) << DCC_SET_EREG_SHIFT)) & \ - DCC_SET_EREG_MASK) - -/* Per channel DRAM Row Attribute registers (32-bit) */ -#define CxDRA_MCHBAR(x) (0x1208 + (x * 0x0100)) -#define CxDRA_PAGESIZE_SHIFT(r) (r * 4) /* Per rank r */ -#define CxDRA_PAGESIZE_MASKr(r) (0x7 << CxDRA_PAGESIZE_SHIFT(r)) -#define CxDRA_PAGESIZE_MASK 0x0000ffff -#define CxDRA_PAGESIZE(r, p) /* for log2(dimm page size in bytes) p */ \ - (((p - 10) << CxDRA_PAGESIZE_SHIFT(r)) & CxDRA_PAGESIZE_MASKr(r)) -#define CxDRA_BANKS_SHIFT(r) ((r * 3) + 16) -#define CxDRA_BANKS_MASKr(r) (0x3 << CxDRA_BANKS_SHIFT(r)) -#define CxDRA_BANKS_MASK 0x07ff0000 -#define CxDRA_BANKS(r, b) /* for number of banks b */ \ - ((b << (CxDRA_BANKS_SHIFT(r) - 3)) & CxDRA_BANKS_MASKr(r)) - -/* - * Per channel DRAM Row Boundary registers (32-bit) - * Every two ranks share one register and must be programmed at the same time. - * All registers (4 ranks per channel) have to be set. - */ -#define CxDRBy_MCHBAR(x, r) (0x1200 + (x * 0x0100) + ((r/2) * 4)) -#define CxDRBy_BOUND_SHIFT(r) ((r % 2) * 16) -#define CxDRBy_BOUND_MASK(r) (0x1fc << CxDRBy_BOUND_SHIFT(r)) -#define CxDRBy_BOUND_MB(r, b) /* for boundary in MB b */ \ - (((b >> 5) << CxDRBy_BOUND_SHIFT(r)) & CxDRBy_BOUND_MASK(r)) - -#define CxDRC0_MCHBAR(x) (0x1230 + (x * 0x0100)) -#define CxDRC0_RANKEN0 (1 << 24) /* Rank Enable */ -#define CxDRC0_RANKEN1 (1 << 25) -#define CxDRC0_RANKEN2 (1 << 26) -#define CxDRC0_RANKEN3 (1 << 27) -#define CxDRC0_RANKEN(r) (1 << (24 + r)) -#define CxDRC0_RANKEN_MASK (0xf << 24) -#define CxDRC0_RMS_SHIFT 8 /* Refresh Mode Select */ -#define CxDRC0_RMS_MASK (7 << CxDRC0_RMS_SHIFT) -#define CxDRC0_RMS_78US (2 << CxDRC0_RMS_SHIFT) -#define CxDRC0_RMS_39US (3 << CxDRC0_RMS_SHIFT) - -#define CxDRC1_MCHBAR(x) (0x1234 + (x * 0x0100)) -#define CxDRC1_SSDS_SHIFT 24 -#define CxDRC1_SSDS_MASK (0xff << CxDRC1_SSDS_SHIFT) -#define CxDRC1_DS (0x91 << CxDRC1_SSDS_SHIFT) -#define CxDRC1_SS (0xb1 << CxDRC1_SSDS_SHIFT) -#define CxDRC1_NOTPOP(r) (1 << (16 + r)) /* Write 1 for Not Populated */ -#define CxDRC1_NOTPOP_MASK (0xf << 16) -#define CxDRC1_MUSTWR (3 << 11) - -#define CxDRC2_MCHBAR(x) (0x1238 + (x * 0x0100)) -#define CxDRC2_NOTPOP(r) (1 << (24 + r)) /* Write 1 for Not Populated */ -#define CxDRC2_NOTPOP_MASK (0xf << 24) -#define CxDRC2_MUSTWR (1 << 12) -#define CxDRC2_CLK1067MT (1 << 0) - -/* DRAM Timing registers (32-bit each) */ -#define CxDRT0_MCHBAR(x) (0x1210 + (x * 0x0100)) -#define CxDRT0_BtB_WtP_SHIFT 26 -#define CxDRT0_BtB_WtP_MASK (0x1f << CxDRT0_BtB_WtP_SHIFT) -#define CxDRT0_BtB_WtR_SHIFT 20 -#define CxDRT0_BtB_WtR_MASK (0x1f << CxDRT0_BtB_WtR_SHIFT) -#define CxDRT1_MCHBAR(x) (0x1214 + (x * 0x0100)) -#define CxDRT2_MCHBAR(x) (0x1218 + (x * 0x0100)) -#define CxDRT3_MCHBAR(x) (0x121c + (x * 0x0100)) -#define CxDRT4_MCHBAR(x) (0x1220 + (x * 0x0100)) -#define CxDRT5_MCHBAR(x) (0x1224 + (x * 0x0100)) -#define CxDRT6_MCHBAR(x) (0x1228 + (x * 0x0100)) - -/* Clock disable registers (32-bit each) */ -#define CxDCLKDIS_MCHBAR(x) (0x120c + (x * 0x0100)) -#define CxDCLKDIS_MASK 3 -#define CxDCLKDIS_ENABLE 3 /* Always enable both clock pairs. */ - -/* On-Die-Termination registers (2x 32-bit per channel) */ -#define CxODT_HIGH(x) (0x124c + (x * 0x0100)) -#define CxODT_LOW(x) (0x1248 + (x * 0x0100)) - -/* Write Training registers. */ -#define CxWRTy_MCHBAR(ch, s) (0x1470 + (ch * 0x0100) + ((3 - s) * 4)) - -#define CxGTEW(x) (0x1270+(x*0x100)) -#define CxGTC(x) (0x1274+(x*0x100)) -#define CxDTPEW(x) (0x1278+(x*0x100)) -#define CxDTAEW(x) (0x1280+(x*0x100)) -#define CxDTC(x) (0x1288+(x*0x100)) - - /* * DMIBAR */ @@ -382,7 +122,6 @@ enum { #define DMIVC0RCTL 0x14 #define DMIESD 0x44 - /* * EPBAR */ @@ -391,34 +130,6 @@ enum { #define EPBAR16(x) *((volatile u16 *)(DEFAULT_EPBAR + x)) #define EPBAR32(x) *((volatile u32 *)(DEFAULT_EPBAR + x)) - -#ifndef __ASSEMBLER__ -void gm45_early_init(void); -void gm45_early_reset(void); - -void enter_raminit_or_reset(void); -void get_gmch_info(sysinfo_t *); -void raminit_thermal(const sysinfo_t *); -void init_igd(const sysinfo_t *, int no_igd, int no_peg); -void init_pm(const sysinfo_t *); - -int raminit_read_vco_index(void); -u32 raminit_get_rank_addr(unsigned int channel, unsigned int rank); - -void raminit_rcomp_calibration(stepping_t stepping); -void raminit_reset_readwrite_pointers(void); -void raminit_receive_enable_calibration(const timings_t *, const dimminfo_t *); -void raminit_write_training(const mem_clock_t, const dimminfo_t *, int s3resume); -void raminit_read_training(const dimminfo_t *, int s3resume); - -void gm45_late_init(stepping_t); - -u32 decode_igd_memory_size(u32 gms); -u32 decode_igd_gtt_size(u32 gsm); - -void init_iommu(void); -#endif - /* Chipset types */ #define NEHALEM_MOBILE 0 #define NEHALEM_DESKTOP 1 -- cgit v1.2.3