From d118b8e518718f5cd15957cd91477cbd26054440 Mon Sep 17 00:00:00 2001 From: Keith Hui Date: Thu, 23 Mar 2023 15:45:37 -0400 Subject: nb/intel/i440bx: Compact debug messages With RAM init debug messages enabled, debug messages take up a lot of flash space in romstage, with many repeated verbiage. By breaking them up and factoring out the common verbiage, made possible with printk(BIOS_DEBUG, "%s", ...), compiler can help deduplicate things and make the romstage smaller. When building for asus/p2b-ls with CONFIG_DEBUG_RAM_SETUP, this patch shrunk romstage by 152 bytes. Change-Id: I66e39e7901efbeb5ab72494ac02fc4d5e687c3a3 Signed-off-by: Keith Hui Reviewed-on: https://review.coreboot.org/c/coreboot/+/74032 Tested-by: build bot (Jenkins) Reviewed-by: Angel Pons --- src/northbridge/intel/i440bx/raminit.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'src/northbridge/intel/i440bx') diff --git a/src/northbridge/intel/i440bx/raminit.c b/src/northbridge/intel/i440bx/raminit.c index 9f5f2dd918..8d9ceff71a 100644 --- a/src/northbridge/intel/i440bx/raminit.c +++ b/src/northbridge/intel/i440bx/raminit.c @@ -645,7 +645,7 @@ static void sdram_set_registers(void) { int i, max; - PRINT_DEBUG("Northbridge prior to SDRAM init:\n"); + PRINT_DEBUG("Northbridge %s SDRAM init:\n", "prior to"); DUMPNORTH(); max = ARRAY_SIZE(register_values); @@ -713,13 +713,13 @@ static struct dimm_size spd_get_dimm_size(unsigned int device) * modules by setting them to a supported size. */ if (sz.side1 > 128) { - PRINT_DEBUG("Side1 was %dMB but only 128MB will be used.\n", - sz.side1); + PRINT_DEBUG("Side%d was %dMB but only 128MB will be used.\n", + 1, sz.side1); sz.side1 = 128; if (sz.side2 > 128) { - PRINT_DEBUG("Side2 was %dMB but only 128MB will be used.\n", - sz.side2); + PRINT_DEBUG("Side%d was %dMB but only 128MB will be used.\n", + 2, sz.side2); sz.side2 = 128; } } @@ -919,7 +919,7 @@ static void set_dram_row_attributes(void) /* Set paging policy register. */ pci_write_config8(NB, PGPOL + 1, bpr); - PRINT_DEBUG("PGPOL[BPR] has been set to 0x%02x\n", bpr); + PRINT_DEBUG("%s has been set to 0x%02x\n", "PGPOL[BPR]", bpr); /* Set DRAM row page size register. */ pci_write_config16(NB, RPS, rps); @@ -927,7 +927,7 @@ static void set_dram_row_attributes(void) /* ### ECC */ pci_write_config8(NB, NBXCFG + 3, nbxecc); - PRINT_DEBUG("NBXECC[31:24] has been set to 0x%02x\n", nbxecc); + PRINT_DEBUG("%s has been set to 0x%02x\n", "NBXCFG[31:24]", nbxecc); /* Set DRAMC[4:3] to proper memory type (EDO/SDRAM/Registered SDRAM). */ @@ -943,7 +943,7 @@ static void set_dram_row_attributes(void) value = pci_read_config8(NB, DRAMC) & 0xe7; value |= i; pci_write_config8(NB, DRAMC, value); - PRINT_DEBUG("DRAMC has been set to 0x%02x\n", value); + PRINT_DEBUG("%s has been set to 0x%02x\n", "DRAMC", value); } static void sdram_set_spd_registers(void) @@ -963,39 +963,39 @@ static void sdram_enable(void) udelay(200); /* 1. Apply NOP. Wait 200 clock cycles (200us should do). */ - PRINT_DEBUG("RAM Enable 1: Apply NOP\n"); + PRINT_DEBUG("RAM Enable %d: %s\n", 1, "Apply NOP"); do_ram_command(RAM_COMMAND_NOP); udelay(200); /* 2. Precharge all. Wait tRP. */ - PRINT_DEBUG("RAM Enable 2: Precharge all\n"); + PRINT_DEBUG("RAM Enable %d: %s\n", 2, "Precharge all"); do_ram_command(RAM_COMMAND_PRECHARGE); udelay(1); /* 3. Perform 8 refresh cycles. Wait tRC each time. */ - PRINT_DEBUG("RAM Enable 3: CBR\n"); + PRINT_DEBUG("RAM Enable %d: %s\n", 3, "CBR"); for (i = 0; i < 8; i++) { do_ram_command(RAM_COMMAND_CBR); udelay(1); } /* 4. Mode register set. Wait two memory cycles. */ - PRINT_DEBUG("RAM Enable 4: Mode register set\n"); + PRINT_DEBUG("RAM Enable %d: %s\n", 4, "Mode register set"); do_ram_command(RAM_COMMAND_MRS); udelay(2); /* 5. Normal operation. */ - PRINT_DEBUG("RAM Enable 5: Normal operation\n"); + PRINT_DEBUG("RAM Enable %d: %s\n", 5, "Normal operation"); do_ram_command(RAM_COMMAND_NORMAL); udelay(1); /* 6. Finally enable refresh. */ - PRINT_DEBUG("RAM Enable 6: Enable refresh\n"); + PRINT_DEBUG("RAM Enable %d: %s\n", 6, "Enable refresh"); pci_write_config8(NB, PMCR, 0x10); spd_enable_refresh(); udelay(1); - PRINT_DEBUG("Northbridge following SDRAM init:\n"); + PRINT_DEBUG("Northbridge %s SDRAM init:\n", "following"); DUMPNORTH(); } -- cgit v1.2.3