From c3efd138a712fe844db2c667a50208358ff423bf Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Sun, 26 Mar 2006 17:13:31 +0000 Subject: trying to translate some of this. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2228 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/northbridge/amd/amdk8/incoherent_ht.c | 191 +++++++++++++++++++++--------- 1 file changed, 135 insertions(+), 56 deletions(-) (limited to 'src/northbridge/amd') diff --git a/src/northbridge/amd/amdk8/incoherent_ht.c b/src/northbridge/amd/amdk8/incoherent_ht.c index 0f87459244..2623935ab2 100644 --- a/src/northbridge/amd/amdk8/incoherent_ht.c +++ b/src/northbridge/amd/amdk8/incoherent_ht.c @@ -1,8 +1,11 @@ /* - This should be done by Eric - 2004.12 yhlu add multi ht chain dynamically support - 2005.11 yhlu add let real sb to use small unitid -*/ + * incoherent hypertransport enumeration + * originally written by Eric Biederman + * + * 2004.12 yhlu add multi ht chain dynamically support + * 2005.11 yhlu add let real sb to use small unitid + * 2006.03 stepan cleanups + */ #include #include #include @@ -19,7 +22,10 @@ #define K8_ALLOCATE_IO_RANGE 0 #endif -// Do we need allocate MMIO? Current We direct last 64M to sblink only, We can not lose access to last 4M range to ROM +/* Do we need to allocate MMIO? Currently we direct the last 64M + * to the southbridge link only. We have to remain access to the + * 4G-4M range for the southbridge (Flash ROM) + */ #ifndef K8_ALLOCATE_MMIO_RANGE #define K8_ALLOCATE_MMIO_RANGE 0 #endif @@ -49,7 +55,9 @@ static uint8_t ht_lookup_capability(device_t dev, uint16_t val) if (pos > PCI_CAP_LIST_NEXT) { pos = pci_read_config8(dev, pos); } - while(pos != 0) { /* loop through the linked list */ + + /* loop through the linked list */ + while(pos != 0) { uint8_t cap; cap = pci_read_config8(dev, pos + PCI_CAP_LIST_ID); if (cap == PCI_CAP_ID_HT) { @@ -81,7 +89,7 @@ static void ht_collapse_previous_enumeration(uint8_t bus, unsigned offset_unitid device_t dev; uint32_t id; - //actually, only for one HT device HT chain, and unitid is 0 + // actually, only for one HT device HT chain, and unitid is 0 #if HT_CHAIN_UNITID_BASE == 0 if(offset_unitid) { return; @@ -260,22 +268,33 @@ static int ht_optimize_link( return needs_reset; } + #if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1) #if RAMINIT_SYSINFO == 1 -static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid, struct sys_info *sysinfo); +static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, + unsigned offset_unitid, struct sys_info *sysinfo); + static int scan_pci_bus( unsigned bus , struct sys_info *sysinfo) #else -static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid); +static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, + unsigned offset_unitid); + static int scan_pci_bus( unsigned bus) #endif { - /* - here we already can access PCI_DEV(bus, 0, 0) to PCI_DEV(bus, 0x1f, 0x7) - So We can scan these devices to find out if they are bridge - If it is pci bridge, We need to set busn in bridge, and go on - For ht bridge, We need to set the busn in bridge and ht_setup_chainx, and the scan_pci_bus - */ + /* Here we already can access PCI_DEV(bus, 0, 0) to + * PCI_DEV(bus, 0x1f, 0x7). + * + * So scan these devices to find out whether there are more bridges. + * + * - If we find a pci bridge, set the bus number in the bridge, and + * continue with the next device. + * + * - For hypertransport bridges, set the bus number in the bridge and + * call ht_setup_chainx(), and scan_pci_bus() + * + */ unsigned int devfn; unsigned new_bus; unsigned max_bus; @@ -337,12 +356,18 @@ static int scan_pci_bus( unsigned bus) ((unsigned int) max_bus << 16)); pci_write_config32(dev, PCI_PRIMARY_BUS, buses); - /* here we need to figure out if dev is a ht bridge - if it is ht bridge, we need to call ht_setup_chainx at first - Not verified --- yhlu - */ - uint8_t upos; - upos = ht_lookup_host_capability(dev); // one func one ht sub + /* Here we need to figure out if dev is a ht + * bridge. If it is, we need to call + * ht_setup_chainx() first + * + * Not verified --- yhlu + */ + + uint8_t upos; // is this valid C? + + // one func one ht sub + upos = ht_lookup_host_capability(dev); + if (upos) { // sub ht chain uint8_t busn; busn = (new_bus & 0xff); @@ -380,6 +405,7 @@ static int scan_pci_bus( unsigned bus) * time probing another function. * Skip to next device. */ + if ( ((devfn & 0x07) == 0x00) && ((hdr_type & 0x80) != 0x80)) { devfn += 0x07; @@ -396,7 +422,9 @@ static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned o static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid) #endif { - //even HT_CHAIN_UNITID_BASE == 0, we still can go through this function, because of end_of_chain check, also We need it to optimize link + // execute this function even with HT_CHAIN_UNITID_BASE == 0, + // because of the end_of_chain check, and we need it to + // optimize the links uint8_t next_unitid, last_unitid; unsigned uoffs; @@ -406,7 +434,8 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned of #endif #if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE - //let't record the device of last ht device, So we can set the Unitid to HT_CHAIN_END_UNITID_BASE + // record the device id of last ht device, so we can set the + // unit id to HT_CHAIN_END_UNITID_BASE unsigned real_last_unitid; uint8_t real_last_pos; int ht_dev_num = 0; @@ -490,15 +519,17 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned of next_unitid += count; - /* Find which side of the ht link we are on, - * by reading which direction our last write to PCI_CAP_FLAGS - * came from. + /* Find which side of the ht link we are on, by reading + * which direction our last write to PCI_CAP_FLAGS came + * from. */ flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS); offs = ((flags>>10) & 1) ? PCI_HT_SLAVE1_OFFS : PCI_HT_SLAVE0_OFFS; #if RAMINIT_SYSINFO == 1 - /* store the link pair here and we will Setup the Hypertransport link later, after we get final FID/VID */ + /* store the link pair here and we will setup the + * Hypertransport link later, after we get final FID/VID + */ { struct link_pair_st *link_pair = &sysinfo->link_pair[sysinfo->link_pair_num]; link_pair->udev = udev; @@ -513,7 +544,7 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned of reset_needed |= ht_optimize_link(udev, upos, uoffs, dev, pos, offs); #endif - /* Remeber the location of the last device */ + /* Remember the location of the last device */ udev = dev; upos = pos; uoffs = ( offs != PCI_HT_SLAVE0_OFFS ) ? PCI_HT_SLAVE0_OFFS : PCI_HT_SLAVE1_OFFS; @@ -555,6 +586,8 @@ end_of_chain: ; } + + #if RAMINIT_SYSINFO == 1 static void ht_setup_chain(device_t udev, unsigned upos, struct sys_info *sysinfo) #else @@ -585,7 +618,10 @@ static int ht_setup_chain(device_t udev, unsigned upos) return ht_setup_chainx(udev, upos, 0, offset_unitid); #endif } -static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, uint8_t linkt, uint8_t val) + + +static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, + uint8_t linkt, uint8_t val) { uint32_t dword, dword_old; uint8_t link_type; @@ -596,7 +632,8 @@ static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, uint8_t linkt dword_old = dword = pci_read_config32(PCI_DEV(0,0x18+node,3), 0xdc); - if ( (link_type & 7) == linkt ) { /* Coherent Link only linkt = 3, ncoherent = 7*/ + /* coherent link only linkt = 3, non coherent = 7*/ + if ( (link_type & 7) == linkt ) { dword &= ~( 0xff<<(linkn *8) ); dword |= val << (linkn *8); } @@ -650,11 +687,12 @@ static void ht_setup_chains(uint8_t ht_c_num, struct sys_info *sysinfo) static int ht_setup_chains(uint8_t ht_c_num) #endif { - /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it. - * On most boards this just happens. If a cpu has multiple - * non Coherent links the appropriate bus registers for the + /* Assumption: The HT chain that is bus 0 has the HT I/O Hub on it. + * On most boards this just happens. If a cpu has multiple + * non coherent links the appropriate bus registers for the * links needs to be programed to point at bus 0. */ + uint8_t upos; device_t udev; uint8_t i; @@ -679,9 +717,14 @@ static int ht_setup_chains(uint8_t ht_c_num) reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4); - //We need setup 0x94, 0xb4, and 0xd4 according to the reg - devpos = ((reg & 0xf0)>>4)+0x18; // nodeid; it will decide 0x18 or 0x19 - regpos = ((reg & 0xf00)>>8) * 0x20 + 0x94; // link n; it will decide 0x94 or 0xb4, 0x0xd4; + // We need to setup 0x94, 0xb4, and 0xd4 according to reg + + // nodeid; it will decide 0x18 or 0x19 + devpos = ((reg & 0xf0)>>4)+0x18; + + // link n; it will decide 0x94 or 0xb4, 0x0xd4; + regpos = ((reg & 0xf00)>>8) * 0x20 + 0x94; + busn = (reg & 0xff0000)>>16; dword = pci_read_config32( PCI_DEV(0, devpos, 0), regpos) ; @@ -710,12 +753,15 @@ static int ht_setup_chains(uint8_t ht_c_num) #endif #if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1) - /* You can use use this in romcc, because there is function call in romcc, recursive will kill you */ + /* You can not use use this in romcc, because recursive + * function calls in romcc will kill you + */ bus = busn; // we need 32 bit #if RAMINIT_SYSINFO == 1 scan_pci_bus(bus, sysinfo); #else - reset_needed |= (scan_pci_bus(bus)>>16); // take out reset_needed that stored in upword + // take out reset_needed that is stored in upword + reset_needed |= (scan_pci_bus(bus)>>16); #endif #endif } @@ -764,7 +810,8 @@ static int ht_setup_chains_x(void) tempreg = 3 | ( 0<<4) | (((reg>>8) & 3)<<8) | (0<<16)| (0x3f<<24); pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0, tempreg); - next_busn=0x3f+1; /* 0 will be used ht chain with SB we need to keep SB in bus0 in auto stage*/ + /* 0 will be used ht chain with SB we need to keep SB in bus 0 in auto stage */ + next_busn=0x3f+1; #if K8_ALLOCATE_IO_RANGE == 1 /* io range allocation */ @@ -789,38 +836,67 @@ static int ht_setup_chains_x(void) dev = PCI_DEV(0, 0x18+nodeid,0); for(linkn = 0; linkn<3; linkn++) { unsigned regpos; + regpos = 0x98 + 0x20 * linkn; reg = pci_read_config32(dev, regpos); - if ((reg & 0x17) != 7) continue; /* it is not non conherent or not connected*/ - print_linkn_in("NC node|link=", ((nodeid & 0xf)<<4)|(linkn & 0xf)); + + /* skip if link is non conherent or not connected*/ + if ((reg & 0x17) != 7) continue; + + print_linkn_in("NC node|link=", + ((nodeid & 0xf)<<4)|(linkn & 0xf)); + tempreg = 3 | (nodeid <<4) | (linkn<<8); - /*compare (temp & 0xffff), with (PCI(0, 0x18, 1) 0xe0 to 0xec & 0xfffff) */ + + /* compare (temp & 0xffff) with + * (PCI(0, 0x18, 1) 0xe0 to 0xec & 0xfffff) + */ for(ht_c_num=0;ht_c_num<4; ht_c_num++) { - reg = pci_read_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4); - if(((reg & 0xffff) == (tempreg & 0xffff)) || ((reg & 0xffff) == 0x0000)) { /*we got it*/ + reg = pci_read_config32( PCI_DEV(0, 0x18, 1), + 0xe0 + ht_c_num * 4); + + if ( ((reg & 0xffff) == (tempreg & 0xffff)) + || ((reg & 0xffff) == 0x0000) ) { + /*we got it*/ break; } } - if(ht_c_num == 4) break; /*used up only 4 non conherent allowed*/ - /*update to 0xe0...*/ - if((reg & 0xf) == 3) continue; /*SbLink so don't touch it */ + + /* used up the maximum allowed 4 non conherent links */ + if(ht_c_num == 4) break; + + /* update to 0xe0...*/ + if((reg & 0xf) == 3) continue; /* SbLink so don't touch it */ + print_linkn_in("\tbusn=", next_busn); + tempreg |= (next_busn<<16)|((next_busn+0x3f)<<24); - pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4, tempreg); + pci_write_config32(PCI_DEV(0, 0x18, 1), + 0xe0 + ht_c_num * 4, tempreg); + next_busn+=0x3f+1; #if K8_ALLOCATE_IO_RANGE == 1 /* io range allocation */ - tempreg = nodeid | (linkn<<4) | ((next_io_base+0x3)<<12); //limit - pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC4 + ht_c_num * 8, tempreg); - tempreg = 3 /*| ( 3<<4)*/ | (next_io_base<<12); //base :ISA and VGA ? - pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC0 + ht_c_num * 8, tempreg); + + // limit + tempreg = nodeid | (linkn<<4) | ((next_io_base+0x3)<<12); + pci_write_config32( PCI_DEV(0, 0x18, 1), + 0xC4 + ht_c_num * 8, tempreg); + + // base :ISA and VGA ? + tempreg = 3 /*| ( 3<<4)*/ | (next_io_base<<12); + pci_write_config32(PCI_DEV(0, 0x18, 1), + 0xC0 + ht_c_num * 8, tempreg); + next_io_base += 0x3+0x1; #endif - } } - /*update 0xe0, 0xe4, 0xe8, 0xec from PCI_DEV(0, 0x18,1) to PCI_DEV(0, 0x19,1) to PCI_DEV(0, 0x1f,1);*/ + + /* update 0xe0, 0xe4, 0xe8, 0xec from PCI_DEV(0, 0x18,1) + * to PCI_DEV(0, 0x19,1) to PCI_DEV(0, 0x1f,1); + */ for(nodeid = 1; nodeidlink_pair[i]; - reset_needed |= ht_optimize_link(link_pair->udev, link_pair->upos, link_pair->uoffs, link_pair->dev, link_pair->pos, link_pair->offs); + reset_needed |= ht_optimize_link(link_pair->udev, + link_pair->upos, link_pair->uoffs, + link_pair->dev, link_pair->pos, link_pair->offs); } reset_needed |= optimize_link_read_pointers(sysinfo->ht_c_num); @@ -901,6 +979,7 @@ static unsigned get_sblnk(void) /* Look up a which bus a given node/link combination is on. * return 0 when we can't find the answer. */ + static unsigned node_link_to_bus(unsigned node, unsigned link) { unsigned reg; -- cgit v1.2.3