From 108dd2c01eb5a01605862b3c105f0aad75842795 Mon Sep 17 00:00:00 2001 From: Li-Ta Lo Date: Thu, 23 Feb 2006 21:39:19 +0000 Subject: preliminary GX DRAM initization. It is not working yet. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2181 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/northbridge/amd/gx2/northbridge.c | 4 +- src/northbridge/amd/gx2/raminit.c | 442 ++++++++-------------------------- src/northbridge/amd/gx2/raminit.h | 7 +- 3 files changed, 103 insertions(+), 350 deletions(-) (limited to 'src/northbridge/amd/gx2') diff --git a/src/northbridge/amd/gx2/northbridge.c b/src/northbridge/amd/gx2/northbridge.c index b02ff786cc..3b2bbc15df 100644 --- a/src/northbridge/amd/gx2/northbridge.c +++ b/src/northbridge/amd/gx2/northbridge.c @@ -14,7 +14,6 @@ #define NORTHBRIDGE_FILE "northbridge.c" /* */ - static void optimize_xbus(device_t dev) { /* Optimise X-Bus performance */ @@ -119,7 +118,7 @@ static void pci_domain_set_resources(device_t dev) { device_t mc_dev; uint32_t pci_tolm; - +#if 0 pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev->link[0].children; if (mc_dev) { @@ -162,6 +161,7 @@ static void pci_domain_set_resources(device_t dev) ram_resource(dev, idx++, 0, tolmk); } assign_resources(&dev->link[0]); +#endif } static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max) diff --git a/src/northbridge/amd/gx2/raminit.c b/src/northbridge/amd/gx2/raminit.c index 3fc63c69e2..1b2ad6a6b9 100644 --- a/src/northbridge/amd/gx2/raminit.c +++ b/src/northbridge/amd/gx2/raminit.c @@ -1,357 +1,111 @@ #include -/* -This software and ancillary information (herein called SOFTWARE ) -called LinuxBIOS is made available under the terms described -here. The SOFTWARE has been approved for release with associated -LA-CC Number 00-34 . Unless otherwise indicated, this SOFTWARE has -been authored by an employee or employees of the University of -California, operator of the Los Alamos National Laboratory under -Contract No. W-7405-ENG-36 with the U.S. Department of Energy. The -U.S. Government has rights to use, reproduce, and distribute this -SOFTWARE. The public may copy, distribute, prepare derivative works -and publicly display this SOFTWARE without charge, provided that this -Notice and any statement of authorship are reproduced on all copies. -Neither the Government nor the University makes any warranty, express -or implied, or assumes any liability or responsibility for the use of -this SOFTWARE. If SOFTWARE is modified to produce derivative works, -such modified SOFTWARE should be clearly marked, so as not to confuse -it with the version available from LANL. - */ -/* Copyright 2000, Ron Minnich, Advanced Computing Lab, LANL - * rminnich@lanl.gov - */ - -/* SDRAM initialization for GX1 - translated from Christer Weinigel's - assembler version into C. - - Hamish Guthrie 10/4/2005 hamish@prodigi.ch -*/ -/* just converted to GX2 by ron minnich -- this is probably mostly wrong - * I am just putting in a placeholder to start building gx2 support - */ - -#define NUM_REFRESH 8 -#define TEST_DATA1 0x05A5A5A5A -#define TEST_DATA2 0x0DEADBEEF - -void setGX2Mem(unsigned int addr, unsigned int data) -{ - writel(data, (volatile void *)addr); -} - -unsigned int getGX2Mem(unsigned int addr) -{ - return (unsigned int)readl((const volatile void *)addr); -} - -void do_refresh(void) +static void sdram_set_registers(const struct mem_controller *ctrl) { -unsigned int tval, i; - - outb(0x71, 0x80); - tval = getGX2Mem(GX_BASE + MC_MEM_CNTRL1); - tval |= RFSHTST; - for(i=0; i>NUM_REFRESH; i++) - setGX2Mem(GX_BASE + MC_MEM_CNTRL1, tval); - outb(0x72, 0x80); } - -void enable_dimm(void) +static void sdram_set_spd_registers(const struct mem_controller *ctrl) { -unsigned int tval, i; - - outb(0x73, 0x80); - - /* start SDCLCK's */ - tval = getGX2Mem(GX_BASE + MC_MEM_CNTRL1); - tval &= ~SDCLKSTRT; - setGX2Mem(GX_BASE + MC_MEM_CNTRL1, tval); - tval |= SDCLKSTRT; - setGX2Mem(GX_BASE + MC_MEM_CNTRL1, tval); - - /* Unmask SDCLK's */ - tval = getGX2Mem(GX_BASE + MC_MEM_CNTRL2); - tval &= ~(SDCLK_MASK | SDCLKOUT_MASK); - setGX2Mem(GX_BASE + MC_MEM_CNTRL2, tval); - tval = getGX2Mem(GX_BASE + MC_MEM_CNTRL2); - - /* Wait for clocks to unmask */ - for(i=0; i<5000; i++) - outb(0, 0xed); - - /* Refresh memory */ - tval = getGX2Mem(GX_BASE + MC_MEM_CNTRL1); - tval |= RFSHTST; - for(i=0; iNUM_REFRESH; i++) - setGX2Mem(GX_BASE + MC_MEM_CNTRL1, tval); - for(i=0; i<2000; i++) - outb(0, 0xed); - outb(0x74, 0x80); -} - -static unsigned int size_dimm(int dimm_shift) -{ -int bank_cfg = 0x700; /* MC_BANK_CFG for 512M */ -unsigned int offset = 0x10000000; /* Offset 256M */ -int failed_flag = 1; - - do { - setGX2Mem(0, TEST_DATA1); - setGX2Mem(offset, TEST_DATA2); - setGX2Mem(0x100, 0); /* Clear the bus */ - if (getGX2Mem(0) != TEST_DATA1) { - setGX2Mem(GX_BASE + MC_BANK_CFG, - getGX2Mem(GX_BASE + MC_BANK_CFG) & ~(DIMM_SZ << dimm_shift)); - bank_cfg -= 0x100; - setGX2Mem(GX_BASE + MC_BANK_CFG, - getGX2Mem(GX_BASE + MC_BANK_CFG) | (bank_cfg << dimm_shift)); - do_refresh(); - offset >>= 1; - } else { - failed_flag = 0; - break; - } - } while (bank_cfg >= 0); - - if (failed_flag) - return (0x0070 << dimm_shift); - else - return(getGX2Mem(GX_BASE + MC_BANK_CFG) & (DIMM_SZ << dimm_shift)); - -} - -static unsigned int module_banks(int dimm_shift) -{ -int page_size = 0x800; /* Smallest page = 1K * 2 banks */ -int comp_banks; - -#if 0 - print_debug("MC_BANK_CFG = "); - print_debug_hex32(getGX2Mem(GX_BASE + MC_BANK_CFG)); - print_debug("\r\n"); -#endif - - /* retrieve the page size from the MC register */ - page_size <<= (((getGX2Mem(GX_BASE + MC_BANK_CFG) & (DIMM_PG_SZ << dimm_shift)) >> dimm_shift) >> 4); - -#if 0 - print_debug(" page_size = "); - print_debug_hex32(page_size); - print_debug("\r\n"); -#endif - - comp_banks = (((getGX2Mem(GX_BASE + MC_BANK_CFG) & (DIMM_COMP_BNK << dimm_shift)) >> dimm_shift) >> 12); - page_size <<= comp_banks; - - setGX2Mem(0, TEST_DATA1); - setGX2Mem(page_size, TEST_DATA2); - setGX2Mem(0x100, 0); /* Clear the bus */ - if (getGX2Mem(page_size) != TEST_DATA2) { - setGX2Mem(GX_BASE + MC_BANK_CFG, - getGX2Mem(GX_BASE + MC_BANK_CFG) & ~(DIMM_MOD_BNK << dimm_shift)); - do_refresh(); - } -#if 0 - print_debug("MC_BANK_CFG = "); - print_debug_hex32(getGX2Mem(GX_BASE + MC_BANK_CFG)); - print_debug("\r\n"); -#endif - return(getGX2Mem(GX_BASE + MC_BANK_CFG) & (DIMM_MOD_BNK << dimm_shift)); } -static unsigned int component_banks(int dimm_shift) +/* Section 6.1.3, LX processor databooks, BIOS Initialization Sequence + * Section 4.1.4, GX/CS5535 GeodeROM Porting guide */ +static void sdram_enable(int controllers, const struct mem_controller *ctrl) { -int page_size = 0x800; /* Smallest page = 1K * 2 banks */ - -#if 0 - print_debug("MC_BANK_CFG = "); - print_debug_hex32(getGX2Mem(GX_BASE + MC_BANK_CFG)); - print_debug("\r\n"); -#endif - - page_size = page_size << (((getGX2Mem(GX_BASE + MC_BANK_CFG) & (DIMM_PG_SZ << dimm_shift)) >> dimm_shift) >> 4); - -#if 0 - print_debug(" page_size = "); - print_debug_hex32(page_size); - print_debug("\r\n"); -#endif - - setGX2Mem(0, TEST_DATA1); - setGX2Mem(page_size, TEST_DATA2); - setGX2Mem(0x100, 0); /* Clear the bus */ - if (getGX2Mem(0) != TEST_DATA1) { - setGX2Mem(GX_BASE + MC_BANK_CFG, - getGX2Mem(GX_BASE + MC_BANK_CFG) & ~(DIMM_COMP_BNK << dimm_shift)); - do_refresh(); + int i; + msr_t msr; + + /* 1. Initialize GLMC registers base on SPD values, + * Hard coded as XpressROM for now */ + print_debug("sdram_enable step 1\r\n"); + msr = rdmsr(0x20000018); + msr.hi = 0x10076013; + msr.lo = 0x00004800; + wrmsr(0x20000018, msr); + + msr = rdmsr(0x20000019); + msr.hi = 0x18000108; + msr.lo = 0x286332a3; + wrmsr(0x20000019, msr); + + /* 2. release from PMode */ + msr = rdmsr(0x20002004); + msr.lo &= !0x04; + msr.lo |= 0x01; + wrmsr(0x20002004, msr); + /* undocmented bits in GX, in LX there are + * 8 bits in PM1_UP_DLY */ + msr = rdmsr(0x2000001a); + //msr.lo |= 0xF000; + msr.lo = 0x0101; + wrmsr(0x2000001a, msr); + print_debug("sdram_enable step 2\r\n"); + + /* 3. release CKE mask to enable CKE */ + msr = rdmsr(0x2000001d); + msr.lo &= !(0x03 << 8); + wrmsr(0x2000201d, msr); + print_debug("sdram_enable step 3\r\n"); + + /* 4. set and clear REF_TST 16 times, more shouldn't hurt */ + for (i = 0; i < 19; i++) { + msr = rdmsr(0x20000018); + msr.lo |= (0x01 << 3); + wrmsr(0x20000018, msr); + msr.lo &= !(0x01 << 3); + wrmsr(0x20000018, msr); } -#if 0 - print_debug("MC_BANK_CFG = "); - print_debug_hex32(getGX2Mem(GX_BASE + MC_BANK_CFG)); - print_debug("\r\n"); -#endif - return(getGX2Mem(GX_BASE + MC_BANK_CFG) & (DIMM_COMP_BNK << dimm_shift)); -} - -static unsigned int page_size(int dimm_shift) -{ -unsigned int page_test_offset = 0x2000; -unsigned int temp; -int page_size_config = 0x40; -unsigned int probe_config; - - do { - setGX2Mem(0, TEST_DATA1); - setGX2Mem(page_test_offset, TEST_DATA2); - setGX2Mem(0x100, 0); - temp = getGX2Mem(0); - setGX2Mem(0, 0); - if(temp == TEST_DATA1) { -#if 0 - print_debug(" Page size Config = "); - print_debug_hex32(page_size_config << dimm_shift); - print_debug("\r\n"); -#endif - return(page_size_config << dimm_shift); - } - - temp = ~(DIMM_PG_SZ << dimm_shift); - - probe_config = getGX2Mem(GX_BASE + MC_BANK_CFG); - probe_config &= temp; - - page_size_config -= 0x10; - page_size_config <<= dimm_shift; - - probe_config |= page_size_config; - - page_size_config >>= dimm_shift; - - page_test_offset >>= 1; - - setGX2Mem(GX_BASE + MC_BANK_CFG, probe_config); - do_refresh(); - } while (page_size_config >= 0); - - return 0x70; -} - -static int dimm_detect(int dimm_shift) -{ -unsigned int test; - - print_debug("Probing for DIMM"); - print_debug_char((dimm_shift >> 4) + 0x30); - print_debug("\r\n"); - - setGX2Mem(0, TEST_DATA1); - setGX2Mem(0x100, 0); - test = getGX2Mem(0); - setGX2Mem(0, 0); - - if (test != TEST_DATA1) - return 0; - - print_debug(" Found DIMM"); - print_debug_char((dimm_shift >> 4) + 0x30); - print_debug("\r\n"); - - return 1; -} - -static int size_memory(int dimm_shift, unsigned int mem_config) -{ - - if (!dimm_detect(dimm_shift)) - return (mem_config); - - mem_config &= (~(DIMM_PG_SZ << dimm_shift)); - mem_config |= (page_size(dimm_shift)); - - print_debug(" Page Size: "); - print_debug_hex32(0x400 << ((mem_config & (DIMM_PG_SZ << dimm_shift)) >> (dimm_shift + 4))); - print_debug("\r\n"); - - /* Now do component banks detection */ - - mem_config &= (~(DIMM_COMP_BNK << dimm_shift)); - mem_config |= (component_banks(dimm_shift)); - - print_debug(" Component Banks: "); - print_debug_char((((mem_config & (DIMM_COMP_BNK << dimm_shift)) >> (dimm_shift + 12)) ? 4 : 2) + 0x30); - print_debug("\r\n"); - - /* Now do module banks */ - - mem_config &= (~(DIMM_MOD_BNK << dimm_shift)); - mem_config |= (module_banks(dimm_shift)); - - print_debug(" Module Banks: "); - print_debug_char((((mem_config & (DIMM_MOD_BNK << dimm_shift)) >> (dimm_shift + 14)) ? 2 : 1) + 0x30); - print_debug("\r\n"); - - mem_config &= (~(DIMM_SZ << dimm_shift)); - mem_config |= (size_dimm(dimm_shift)); - - print_debug(" DIMM size: "); - print_debug_hex32(1 << - ((mem_config & (DIMM_SZ << dimm_shift)) >> (dimm_shift + 8)) + 22); - print_debug("\r\n"); - - return (mem_config); -} - -static void sdram_init(void) -{ -unsigned int mem_config = 0x00700070; - - print_debug("Setting up default parameters for memory\r\n"); - outb(0x70, 0x80); - - setGX2Mem(GX_BASE + MC_MEM_CNTRL2, 0x000007d8); /* Disable all CLKS, Shift = 3 */ - setGX2Mem(GX_BASE + MC_MEM_CNTRL1, 0x92140000); /* MD_DS=2, MA_DS=2, CNTL_DS=2 SDCLKRATE=4 */ - setGX2Mem(GX_BASE + MC_BANK_CFG, 0x00700070); /* No DIMMS installed */ - setGX2Mem(GX_BASE + MC_SYNC_TIM1, 0x3a733225); /* LTMODE=3, RC=10, RAS=7, RP=3, RCD=3, RRD=2, DPL=2 */ - setGX2Mem(GX_BASE + MC_BANK_CFG, 0x57405740); /* Largest DIMM size - 0x4000 -- 2 module banks - 0x1000 -- 4 component banks - 0x0700 -- DIMM size 512MB - 0x0040 -- Page Size 16kB */ - - enable_dimm(); - - print_debug("Sizing memory\r\n"); - - setGX2Mem(GX_BASE + MC_BANK_CFG, 0x00705740); - do_refresh(); - mem_config = size_memory(0, mem_config); - setGX2Mem(GX_BASE + MC_BANK_CFG, 0x57400070); - do_refresh(); - mem_config = size_memory(16, mem_config); - - print_debug("MC_BANK_CFG = "); - print_debug_hex32(mem_config); - print_debug("\r\n"); + print_debug("sdram_enable step 4\r\n"); + + /* 5. set refresh interval */ + msr = rdmsr(0x20000018); + msr.lo |= (0x48 << 8); + wrmsr(0x20000018, msr); + + /* set refresh staggering to 4 SDRAM clocks */ + msr = rdmsr(0x20000018); + msr.lo &= !(0x03 << 6); + wrmsr(0x20000018, msr); + + + /* 6. enable RLL, load Extended Mode Register by set and clear PROG_DRAM */ + msr = rdmsr(0x20000018); + msr.lo |= ((0x01 << 28) | 0x01); + wrmsr(0x20000018, msr); + msr.lo &= !((0x01 << 28) | 0x01); + wrmsr(0x20000018, msr); + print_debug("sdram_enable step 7\r\n"); + + /* 7. Reset DLL, Bit 27 is undocumented in GX datasheet, + * it is documented in LX datasheet */ + /* load Mode Register by set and clear PROG_DRAM */ + msr = rdmsr(0x20000018); + msr.lo |= ((0x01 << 27) | 0x01); + wrmsr(0x20000018, msr); + msr.lo &= !((0x01 << 27) | 0x01); + wrmsr(0x20000018, msr); + print_debug("sdram_enable step 9\r\n"); + + + /* 8. load Mode Register by set and clear PROG_DRAM */ + msr = rdmsr(0x20000018); + msr.lo |= 0x01; + wrmsr(0x20000018, msr); + msr.lo &= !0x01; + wrmsr(0x20000018, msr); + print_debug("sdram_enable step 10\r\n"); + + /* wait 200 SDCLKs */ + for (i = 0; i < 200; i++) + outb(0xaa, 0x80); + + /* load RDSYNC */ + msr = rdmsr(0x2000001a); + msr.hi = 0x000ff310; + wrmsr(0x20000018, msr); + print_debug("sdram_enable step 10\r\n"); + + /* DRAM working now?? */ - setGX2Mem(GX_BASE + MC_BANK_CFG, mem_config); - enable_dimm(); - outb(0x7e, 0x80); } diff --git a/src/northbridge/amd/gx2/raminit.h b/src/northbridge/amd/gx2/raminit.h index 6e40683066..f13f53a09f 100644 --- a/src/northbridge/amd/gx2/raminit.h +++ b/src/northbridge/amd/gx2/raminit.h @@ -1,11 +1,10 @@ #ifndef RAMINIT_H #define RAMINIT_H -#define DIMM_SOCKETS 4 +#define DIMM_SOCKETS 2 + struct mem_controller { - device_t d0; - uint16_t channel0[DIMM_SOCKETS]; + uint16_t channel0[DIMM_SOCKETS]; }; - #endif /* RAMINIT_H */ -- cgit v1.2.3