From 3c206781f2671e727c59f2884301338c56990889 Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Sat, 14 Feb 2015 03:32:21 -0600 Subject: northbridge/amd/amdfam10: Fold back memory frequency based on MCT load K10 processors cannot operate at full memory speeds when more than a certain number of DIMMs are installed on a specific channel. The allowed DIMM numbers and speeds are listed in the BKDG; this patch implements the appropriate frequency reduction to ensure stability. Change-Id: I8ac5b508915e423d262ad36c49de1fe696df2ecd Signed-off-by: Timothy Pearson Reviewed-on: http://review.coreboot.org/8435 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc --- src/northbridge/amd/amdmct/wrappers/mcti_d.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'src/northbridge/amd/amdmct/wrappers') diff --git a/src/northbridge/amd/amdmct/wrappers/mcti_d.c b/src/northbridge/amd/amdmct/wrappers/mcti_d.c index 4df2a16549..4b229bcb39 100644 --- a/src/northbridge/amd/amdmct/wrappers/mcti_d.c +++ b/src/northbridge/amd/amdmct/wrappers/mcti_d.c @@ -1,6 +1,7 @@ /* * This file is part of the coreboot project. * + * Copyright (C) 2015 Timothy Pearson , Raptor Engineering * Copyright (C) 2007-2008 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify @@ -281,7 +282,25 @@ static void mctHookAfterDIMMpre(void) static void mctGet_MaxLoadFreq(struct DCTStatStruc *pDCTstat) { - pDCTstat->PresetmaxFreq = MEM_MAX_LOAD_FREQ; + pDCTstat->PresetmaxFreq = mctGet_NVbits(NV_MAX_MEMCLK); + + /* Determine the number of installed DIMMs */ + int ch1_count = 0; + int ch2_count = 0; + int i; + for (i = 0; i < 15; i = i + 2) { + if (pDCTstat->DIMMValid & (1 << i)) + ch1_count++; + if (pDCTstat->DIMMValid & (1 << (i + 1))) + ch2_count++; + } + if (IS_ENABLED(CONFIG_DEBUG_RAM_SETUP)) { + printk(BIOS_DEBUG, "mctGet_MaxLoadFreq: Channel 1: %d DIMM(s) detected\n", ch1_count); + printk(BIOS_DEBUG, "mctGet_MaxLoadFreq: Channel 2: %d DIMM(s) detected\n", ch2_count); + } + + /* Set limits if needed */ + pDCTstat->PresetmaxFreq = mct_MaxLoadFreq(max(ch1_count, ch2_count), pDCTstat->PresetmaxFreq); } #ifdef UNUSED_CODE -- cgit v1.2.3