From 854e45292b71a0f2777d8ec2edc0d9d6fd1326bf Mon Sep 17 00:00:00 2001 From: "David W. Hendricks" Date: Mon, 9 Feb 2004 22:47:38 +0000 Subject: final merge of YhLu's stuff git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1371 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/northbridge/amd/amdk8/coherent_ht.c | 45 ++++++++++++++++++++++++++++++++ src/northbridge/amd/amdk8/misc_control.c | 26 +++++++----------- src/northbridge/amd/amdk8/northbridge.c | 45 +++++++++++++++++++++++++++++++- 3 files changed, 99 insertions(+), 17 deletions(-) (limited to 'src/northbridge/amd/amdk8') diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c index 61880ec5f6..83e8404e94 100644 --- a/src/northbridge/amd/amdk8/coherent_ht.c +++ b/src/northbridge/amd/amdk8/coherent_ht.c @@ -100,6 +100,42 @@ static void disable_probes(void) print_debug("done.\r\n"); } +//BY LYH +#if 0 +#define WAIT_TIMES 1000 +static void wait_ap_stop(u8 node) +{ + unsigned long reg; + unsigned long i; + for(i=0;i>= 24; +/* print_debug("applicaton cpu apic_id: "); + print_debug_hex32(apic_id); + }*/ + if(apic_id!=0) { //AP apic_id == node_id ?? +// set the ColdResetbit to notify BSP that AP is stopped + reg = pci_read_config32(NODE_HT(apic_id), 0x6C); + reg |= 1<<4; + pci_write_config32(NODE_HT(apic_id), 0x6C, reg); + } + +} +#endif +//BY LYH END static void enable_routing(u8 node) { @@ -152,6 +188,15 @@ static void rename_temp_node(u8 node) val |= node; /* new node */ pci_write_config32(NODE_HT(7), 0x60, val); +//BY LYH +#if 0 + if(node!=0) { + wait_ap_stop(node); + } +#endif +//BY LYH END + + print_debug(" done.\r\n"); diff --git a/src/northbridge/amd/amdk8/misc_control.c b/src/northbridge/amd/amdk8/misc_control.c index 19e7c58ea4..501d766e4f 100644 --- a/src/northbridge/amd/amdk8/misc_control.c +++ b/src/northbridge/amd/amdk8/misc_control.c @@ -10,6 +10,7 @@ #include #include "./cpu_rev.c" +static cpu_reset_count = 0; //By LYH static void misc_control_init(struct device *dev) { uint32_t cmd; @@ -52,27 +53,20 @@ static void misc_control_init(struct device *dev) cmd = 0x04e20707; pci_write_config32(dev, 0xd4, cmd ); } - -/* - * FIXME: This preprocessor check is a mere workaround. - * The right fix is to walk over all links on all nodes - * and set the FIFO read pointer optimization value to - * 0x25 for each link connected to an AMD HT device. - * - * The reason this is only enabled for machines with more - * than one CPU is that Athlon64 machines don't have the - * link at all that is optimized in the code. - */ - -#if CONFIG_MAX_CPUS > 1 +#if 1 +#if HAVE_HARD_RESET==1 + cpu_reset_count++; //by LYH cmd = pci_read_config32(dev, 0xdc); if((cmd & 0x0000ff00) != 0x02500) { cmd &= 0xffff00ff; cmd |= 0x00002500; pci_write_config32(dev, 0xdc, cmd ); - printk_debug("resetting cpu\n"); - hard_reset(); - } + if(cpu_reset_count==CONFIG_MAX_CPUS) { //By LYH + printk_debug("resetting cpu\n"); + hard_reset(); + } //By LYH + } +#endif #endif printk_debug("done.\n"); } diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c index 249e497958..5e49e4b306 100644 --- a/src/northbridge/amd/amdk8/northbridge.c +++ b/src/northbridge/amd/amdk8/northbridge.c @@ -415,6 +415,13 @@ static void amdk8_set_resource(device_t dev, struct resource *resource, unsigned limit |= rlimit & 0x01fff000; limit |= (link & 3) << 4; limit |= (nodeid & 3); + if (reg == 0xc8){ + /* hack to set vga for test */ + /* factory: b0: 03 0a 00 00 00 0b 00 00 */ + f1_write_config32(0xb0, 0xa03); + f1_write_config32(0xb4, 0xb00); + base |= 0x30; + } f1_write_config32(reg + 0x4, limit); f1_write_config32(reg, base); } @@ -476,10 +483,45 @@ unsigned int amdk8_scan_root_bus(device_t root, unsigned int max) return max; } +void amdk8_enable_resources(struct device *dev) +{ + uint16_t ctrl; + unsigned link; + unsigned int vgalink = -1; + + ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL); + ctrl |= dev->link[0].bridge_ctrl; + printk_debug("%s bridge ctrl <- %04x\n", dev_path(dev), ctrl); + printk_err("%s bridge ctrl <- %04x\n", dev_path(dev), ctrl); + pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl); + +#if 0 + /* let's see what link VGA is on */ + for(link = 0; link < dev->links; link++) { + device_t child; + printk_err("Kid %d of k8: bridge ctrl says: 0x%x\n", link, dev->link[link].bridge_ctrl); + if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA) + vgalink = link; + } + + if (vgalink != =1) { + /* now find the IOPAIR that goes to vgalink and set the vga enable in the base part (0x30) */ + /* now allocate an MMIOPAIR and point it to the CPU0, LINK=vgalink */ + /* now set IORR1 so it has a hole for the 0xa0000-0xcffff region */ + } +#endif + + pci_dev_enable_resources(dev); + //enable_childrens_resources(dev); +} + + + static struct device_operations northbridge_operations = { .read_resources = amdk8_read_resources, .set_resources = amdk8_set_resources, - .enable_resources = pci_dev_enable_resources, +// .enable_resources = pci_dev_enable_resources, + .enable_resources = amdk8_enable_resources, .init = 0, .scan_bus = amdk8_scan_chains, .enable = 0, @@ -496,3 +538,4 @@ struct chip_control northbridge_amd_amdk8_control = { .name = "AMD K8 Northbridge", .enumerate = enumerate, }; + -- cgit v1.2.3