From df84a28ccc5fd1392c09e88880e7ae3d87a45a4e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ky=C3=B6sti=20M=C3=A4lkki?= Date: Thu, 18 Jun 2020 19:26:05 +0300 Subject: mb/pcengines/apu2: Switch to proper GPIO API MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use the abstractions provides. Change-Id: I348ba43a76287be5b24012ae3dfc28ed783da9c7 Signed-off-by: Kyösti Mälkki Reviewed-on: https://review.coreboot.org/c/coreboot/+/42521 Tested-by: build bot (Jenkins) Reviewed-by: Angel Pons Reviewed-by: Felix Held Reviewed-by: Michał Żygowski --- src/mainboard/pcengines/apu2/gpio_ftns.c | 69 +++----------------------------- src/mainboard/pcengines/apu2/gpio_ftns.h | 9 ----- src/mainboard/pcengines/apu2/mainboard.c | 5 ++- src/mainboard/pcengines/apu2/romstage.c | 62 ++++++++++++++++------------ 4 files changed, 45 insertions(+), 100 deletions(-) (limited to 'src/mainboard') diff --git a/src/mainboard/pcengines/apu2/gpio_ftns.c b/src/mainboard/pcengines/apu2/gpio_ftns.c index c249c2da5c..28b9a742dd 100644 --- a/src/mainboard/pcengines/apu2/gpio_ftns.c +++ b/src/mainboard/pcengines/apu2/gpio_ftns.c @@ -1,68 +1,9 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -#include #include -#include -#include -#include +#include #include "gpio_ftns.h" -static u32 gpio_read_wrapper(u32 iomux_gpio) -{ - u32 gpio = iomux_gpio << 2; - - if (gpio < 0x100) - return gpio0_read32(gpio & 0xff); - else if (gpio >= 0x100 && gpio < 0x200) - return gpio1_read32(gpio & 0xff); - else if (gpio >= 0x200 && gpio < 0x300) - return gpio2_read32(gpio & 0xff); - - die("Invalid GPIO"); -} - -static void gpio_write_wrapper(u32 iomux_gpio, u32 setting) -{ - u32 gpio = iomux_gpio << 2; - - if (gpio < 0x100) - gpio0_write32(gpio & 0xff, setting); - else if (gpio >= 0x100 && gpio < 0x200) - gpio1_write32(gpio & 0xff, setting); - else if (gpio >= 0x200 && gpio < 0x300) - gpio2_write32(gpio & 0xff, setting); -} - -void configure_gpio(u32 gpio, u8 iomux_ftn, u32 setting) -{ - u32 bdata; - - bdata = gpio_read_wrapper(gpio); - /* out the data value to prevent glitches */ - bdata |= (setting & GPIO_OUTPUT_ENABLE); - gpio_write_wrapper(gpio, bdata); - - /* set direction and data value */ - bdata |= (setting & (GPIO_OUTPUT_ENABLE | GPIO_OUTPUT_VALUE - | GPIO_PULL_UP_ENABLE | GPIO_PULL_DOWN_ENABLE)); - gpio_write_wrapper(gpio, bdata); - - iomux_write8(gpio, iomux_ftn & 0x3); -} - -u8 read_gpio(u32 gpio) -{ - return (gpio_read_wrapper(gpio) & GPIO_PIN_STS) ? 1 : 0; -} - -void write_gpio(u32 gpio, u8 value) -{ - u32 status = gpio_read_wrapper(gpio); - status &= ~GPIO_OUTPUT_VALUE; - status |= (value > 0) ? GPIO_OUTPUT_VALUE : 0; - gpio_write_wrapper(gpio, status); -} - int get_spd_offset(void) { u8 index = 0; @@ -70,10 +11,10 @@ int get_spd_offset(void) * One SPD file contains all 4 options, determine which index to * read here, then call into the standard routines. */ - if (gpio1_read8(0x02) & BIT0) - index |= BIT0; - if (gpio1_read8(0x06) & BIT0) - index |= BIT1; + if (gpio_get(GPIO_49)) + index |= 1 << 0; + if (gpio_get(GPIO_50)) + index |= 1 << 1; return index; } diff --git a/src/mainboard/pcengines/apu2/gpio_ftns.h b/src/mainboard/pcengines/apu2/gpio_ftns.h index d1e76de029..95c744f62b 100644 --- a/src/mainboard/pcengines/apu2/gpio_ftns.h +++ b/src/mainboard/pcengines/apu2/gpio_ftns.h @@ -3,9 +3,6 @@ #ifndef GPIO_FTNS_H #define GPIO_FTNS_H -void configure_gpio(u32 gpio, u8 iomux_ftn, u32 setting); -u8 read_gpio(u32 gpio); -void write_gpio(u32 gpio, u8 value); int get_spd_offset(void); // @@ -28,10 +25,4 @@ int get_spd_offset(void); #define GPIO_68 0x48 // PE4_WDIS (SIMSWAP1 on APU5) #define GPIO_71 0x4D // PROCHOT -#define GPIO_OUTPUT_ENABLE BIT23 -#define GPIO_OUTPUT_VALUE BIT22 -#define GPIO_PULL_DOWN_ENABLE BIT21 -#define GPIO_PULL_UP_ENABLE BIT20 -#define GPIO_PIN_STS BIT16 - #endif /* GPIO_FTNS_H */ diff --git a/src/mainboard/pcengines/apu2/mainboard.c b/src/mainboard/pcengines/apu2/mainboard.c index 40941db69e..bad1a57fd5 100644 --- a/src/mainboard/pcengines/apu2/mainboard.c +++ b/src/mainboard/pcengines/apu2/mainboard.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #include #include @@ -265,8 +266,8 @@ static void mainboard_final(void *chip_info) // // Turn off LED 2 and LED 3 // - write_gpio(GPIO_58, 1); - write_gpio(GPIO_59, 1); + gpio_set(GPIO_58, 1); + gpio_set(GPIO_59, 1); } /* diff --git a/src/mainboard/pcengines/apu2/romstage.c b/src/mainboard/pcengines/apu2/romstage.c index 0fc472ff4b..e0a63f0ed8 100644 --- a/src/mainboard/pcengines/apu2/romstage.c +++ b/src/mainboard/pcengines/apu2/romstage.c @@ -2,9 +2,10 @@ #include #include +#include #include #include -#include +#include #include #include "gpio_ftns.h" @@ -28,52 +29,63 @@ void board_BeforeAgesa(struct sysinfo *cb) pm_write8(0xea, 1); } -static void early_lpc_init(void) +static void pin_input(gpio_t gpio, u8 iomux_ftn) +{ + iomux_write8(gpio, iomux_ftn); + gpio_input(gpio); +} + +static void pin_low(gpio_t gpio, u8 iomux_ftn) +{ + iomux_write8(gpio, iomux_ftn); + gpio_output(gpio, 0); +} + +static void pin_high(gpio_t gpio, u8 iomux_ftn) { - u32 setting = 0x0; + iomux_write8(gpio, iomux_ftn); + gpio_output(gpio, 1); +} +static void early_lpc_init(void) +{ // - // Configure output disabled, value low, pull up/down disabled + // Configure output disabled, pull up/down disabled // - if (CONFIG(BOARD_PCENGINES_APU5)) { - configure_gpio(GPIO_22, Function0, setting); - } + if (CONFIG(BOARD_PCENGINES_APU5)) + pin_input(GPIO_22, Function0); if (CONFIG(BOARD_PCENGINES_APU2) || CONFIG(BOARD_PCENGINES_APU3) || CONFIG(BOARD_PCENGINES_APU4)) { - configure_gpio(GPIO_32, Function0, setting); + pin_input(GPIO_32, Function0); } - configure_gpio(GPIO_49, Function2, setting); - configure_gpio(GPIO_50, Function2, setting); - configure_gpio(GPIO_71, Function0, setting); + pin_input(GPIO_49, Function2); + pin_input(GPIO_50, Function2); + pin_input(GPIO_71, Function0); // // Configure output enabled, value low, pull up/down disabled // - setting = GPIO_OUTPUT_ENABLE; if (CONFIG(BOARD_PCENGINES_APU3) || CONFIG(BOARD_PCENGINES_APU4)) { - configure_gpio(GPIO_33, Function0, setting); + pin_low(GPIO_33, Function0); } - - configure_gpio(GPIO_57, Function1, setting); - configure_gpio(GPIO_58, Function1, setting); - configure_gpio(GPIO_59, Function3, setting); + pin_low(GPIO_57, Function1); + pin_low(GPIO_58, Function1); + pin_low(GPIO_59, Function3); // // Configure output enabled, value high, pull up/down disabled // - setting = GPIO_OUTPUT_ENABLE | GPIO_OUTPUT_VALUE; - if (CONFIG(BOARD_PCENGINES_APU5)) { - configure_gpio(GPIO_32, Function0, setting); - configure_gpio(GPIO_33, Function0, setting); + pin_high(GPIO_32, Function0); + pin_high(GPIO_33, Function0); } - configure_gpio(GPIO_51, Function2, setting); - configure_gpio(GPIO_55, Function3, setting); - configure_gpio(GPIO_64, Function2, setting); - configure_gpio(GPIO_68, Function0, setting); + pin_high(GPIO_51, Function2); + pin_high(GPIO_55, Function3); + pin_high(GPIO_64, Function2); + pin_high(GPIO_68, Function0); } -- cgit v1.2.3