From bbe3e44310700a6c5c80647b5c1da21336d18364 Mon Sep 17 00:00:00 2001 From: Edward O'Callaghan Date: Fri, 2 May 2014 03:11:42 +1000 Subject: mainboard/jetway/nf81-t56n-lf: Properly indent devicetree.cb Following the reasoning in, dfa8a32 src/mainboard/asrock/e350m1: Properly indent devicetree.cb Change-Id: I88ca01519c1c47a7eb0d564a55c945589f9d32af Signed-off-by: Edward O'Callaghan Reviewed-on: http://review.coreboot.org/5629 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: Patrick Georgi --- src/mainboard/jetway/nf81-t56n-lf/devicetree.cb | 88 ++++++++++++------------- 1 file changed, 44 insertions(+), 44 deletions(-) (limited to 'src/mainboard') diff --git a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb b/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb index 574bb8abf0..6c26f75fb4 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb +++ b/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb @@ -20,7 +20,7 @@ chip northbridge/amd/agesa/family14/root_complex device cpu_cluster 0 on chip cpu/amd/agesa/family14 - device lapic 0 on end + device lapic 0 on end end end device domain 0 on @@ -45,57 +45,57 @@ chip northbridge/amd/agesa/family14/root_complex device pci 13.0 on end # OHCI USB 5-9 device pci 13.2 on end # EHCI USB 5-9 device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - device pci 14.1 off end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/fintek/f71869ad + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.1 off end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/fintek/f71869ad # XXX: 4e is the default index port and .xy is the # LDN indexing the pnp_info array found in the superio.c # NB: Jetway board changes the default (0x4e) index port to (0x2e) by pin 124, # see page 18 from Fintek F71869 V1.1 datasheet. - device pnp 2e.00 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.01 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end + device pnp 2e.00 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.01 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end # COM2 not physically wired on board. - device pnp 2e.02 off # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.03 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.04 on # Hardware Monitor - io 0x60 = 0x225 # Fintek datasheet says 0x295. - irq 0x70 = 0 - end - device pnp 2e.05 on # KBC - io 0x60 = 0x060 - irq 0x70 = 1 # Keyboard IRQ - irq 0x72 = 12 # Mouse IRQ - end - device pnp 2e.06 off end # GPIO + device pnp 2e.02 off # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.03 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.04 on # Hardware Monitor + io 0x60 = 0x225 # Fintek datasheet says 0x295. + irq 0x70 = 0 + end + device pnp 2e.05 on # KBC + io 0x60 = 0x060 + irq 0x70 = 1 # Keyboard IRQ + irq 0x72 = 12 # Mouse IRQ + end + device pnp 2e.06 off end # GPIO # TODO: Verify BSEL register content with vendor BIOS using # $ sudo isadump 0x4e 0x4f 0x7 # which select logical device (LDN) 7. Then read that we have in 0x27, bit1 - device pnp 2e.07 off end # BSEL - device pnp 2e.0a on end # PME - end # f71869ad - end #LPC + device pnp 2e.07 off end # BSEL + device pnp 2e.0a on end # PME + end # f71869ad + end #LPC device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} device pci 14.5 on end # OHCI FS/LS USB (0x4399) device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) -- cgit v1.2.3