From af258cc1791b5c46fcb13d41128cc99043a435be Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20=C5=BBygowski?= Date: Sun, 1 Dec 2019 17:42:04 +0100 Subject: mb/*/*: use ACPIMMIO common block wherever possible MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit TEST=boot PC Engines apu2 and launch Debian Linux Signed-off-by: Michał Żygowski Change-Id: I648167ec94367c9494c4253bec21dab20ad7b615 Signed-off-by: Elyes HAOUAS Reviewed-on: https://review.coreboot.org/c/coreboot/+/37401 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki --- src/mainboard/amd/bettong/boardid.c | 9 +- src/mainboard/amd/db-ft3b-lc/romstage.c | 8 +- src/mainboard/amd/inagua/BiosCallOuts.c | 180 +++++++-------- src/mainboard/amd/inagua/mainboard.c | 12 +- src/mainboard/amd/lamar/romstage.c | 22 +- src/mainboard/amd/olivehill/romstage.c | 7 +- src/mainboard/amd/olivehillplus/romstage.c | 7 +- src/mainboard/amd/persimmon/BiosCallOuts.c | 7 +- src/mainboard/amd/persimmon/mainboard.c | 11 +- src/mainboard/amd/south_station/BiosCallOuts.c | 280 +++++++++++------------ src/mainboard/amd/south_station/mainboard.c | 20 +- src/mainboard/amd/thatcher/romstage.c | 7 +- src/mainboard/amd/union_station/BiosCallOuts.c | 280 +++++++++++------------ src/mainboard/asrock/e350m1/BiosCallOuts.c | 148 ++++++------ src/mainboard/asrock/e350m1/mainboard.c | 14 +- src/mainboard/asrock/imb-a180/bootblock.c | 10 +- src/mainboard/asus/am1i-a/bootblock.c | 2 +- src/mainboard/asus/f2a85-m/bootblock.c | 4 +- src/mainboard/asus/f2a85-m/romstage.c | 6 +- src/mainboard/bap/ode_e20XX/romstage.c | 4 +- src/mainboard/bap/ode_e21XX/romstage.c | 7 +- src/mainboard/biostar/a68n_5200/romstage.c | 6 +- src/mainboard/biostar/am1ml/bootblock.c | 10 +- src/mainboard/elmex/pcm205400/BiosCallOuts.c | 7 +- src/mainboard/elmex/pcm205400/mainboard.c | 11 +- src/mainboard/gizmosphere/gizmo/mainboard.c | 15 +- src/mainboard/gizmosphere/gizmo2/romstage.c | 19 +- src/mainboard/hp/abm/romstage.c | 28 +-- src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c | 7 +- src/mainboard/jetway/nf81-t56n-lf/mainboard.c | 11 +- src/mainboard/lippert/frontrunner-af/mainboard.c | 68 +++--- src/mainboard/lippert/toucan-af/mainboard.c | 85 ++++--- src/mainboard/pcengines/apu1/gpio_ftns.c | 16 +- src/mainboard/pcengines/apu1/gpio_ftns.h | 4 +- src/mainboard/pcengines/apu1/mainboard.c | 19 +- src/mainboard/pcengines/apu2/gpio_ftns.c | 56 +++-- src/mainboard/pcengines/apu2/gpio_ftns.h | 2 +- 37 files changed, 663 insertions(+), 746 deletions(-) (limited to 'src/mainboard') diff --git a/src/mainboard/amd/bettong/boardid.c b/src/mainboard/amd/bettong/boardid.c index a3c568f820..21d0476204 100644 --- a/src/mainboard/amd/bettong/boardid.c +++ b/src/mainboard/amd/bettong/boardid.c @@ -14,6 +14,7 @@ */ #include +#include #include #include #include @@ -30,17 +31,15 @@ */ uint32_t board_id(void) { - void *gpiommioaddr; u8 value = 0; u8 boardrev = 0; char boardid; - gpiommioaddr = (void *)AMD_SB_ACPI_MMIO_ADDR + 0x1500; - value = read8(gpiommioaddr + (7 << 2) + 2); /* agpio7: board_id2 */ + value = gpio0_read8((7 << 2) + 2); /* agpio7: board_id2 */ boardrev = value & 1; - value = read8(gpiommioaddr + (6 << 2) + 2); /* agpio6: board_id1 */ + value = gpio0_read8((6 << 2) + 2); /* agpio6: board_id1 */ boardrev |= (value & 1) << 1; - value = read8(gpiommioaddr + (5 << 2) + 2); /* agpio5: board_id0 */ + value = gpio0_read8((5 << 2) + 2); /* agpio5: board_id0 */ boardrev |= (value & 1) << 2; boardid = 'A' + boardrev; diff --git a/src/mainboard/amd/db-ft3b-lc/romstage.c b/src/mainboard/amd/db-ft3b-lc/romstage.c index a3ad3a16e9..77250c2259 100644 --- a/src/mainboard/amd/db-ft3b-lc/romstage.c +++ b/src/mainboard/amd/db-ft3b-lc/romstage.c @@ -14,6 +14,7 @@ */ #include +#include #include #include #include @@ -34,8 +35,7 @@ static void romstage_main_template(void) * the SoC BKDGs. Without this setting, there is no serial * output. */ - outb(0xD2, 0xcd6); - outb(0x00, 0xcd7); + pm_io_write8(0xd2, 0); if (!cpu_init_detectedx && boot_cpu()) { post_code(0x30); @@ -47,7 +47,5 @@ static void romstage_main_template(void) void agesa_postcar(struct sysinfo *cb) { - /* After AMD_INIT_ENV -> move to ramstage ? */ - outb(0xEA, 0xCD6); - outb(0x1, 0xcd7); + pm_io_write8(0xea, 1); } diff --git a/src/mainboard/amd/inagua/BiosCallOuts.c b/src/mainboard/amd/inagua/BiosCallOuts.c index b6267a69bb..0ae9f28f98 100644 --- a/src/mainboard/amd/inagua/BiosCallOuts.c +++ b/src/mainboard/amd/inagua/BiosCallOuts.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include @@ -46,76 +47,68 @@ static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigP UINT32 AcpiMmioAddr; UINT32 GpioMmioAddr; UINT8 Data8; - UINT16 Data16; UINT8 TempData8; FcnData = Data; MemData = ConfigPtr; Status = AGESA_SUCCESS; - /* Get SB MMIO Base (AcpiMmioAddr) */ - WriteIo8 (0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); - Data16 = Data8 << 8; - WriteIo8 (0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); - Data16 |= Data8; - AcpiMmioAddr = (UINT32)Data16 << 16; + AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR; GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); Data8 &= ~BIT5; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); TempData8 &= 0x03; TempData8 |= Data8; Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); Data8 |= BIT2+BIT3; Data8 &= ~BIT4; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); TempData8 &= 0x23; TempData8 |= Data8; Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); Data8 &= ~BIT5; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); TempData8 &= 0x03; TempData8 |= Data8; Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); Data8 |= BIT2+BIT3; Data8 &= ~BIT4; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); TempData8 &= 0x23; TempData8 |= Data8; Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); switch (MemData->ParameterListPtr->DDR3Voltage) { - case VOLT1_35: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 |= (UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - break; - case VOLT1_25: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - break; - case VOLT1_5: - default: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 |= (UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + case VOLT1_35: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 |= (UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + break; + case VOLT1_25: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + break; + case VOLT1_5: + default: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 |= (UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); } return Status; } @@ -130,70 +123,67 @@ static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *Confi UINT32 GpioMmioAddr; UINT32 AcpiMmioAddr; UINT8 Data8; - UINT16 Data16; FcnData = Data; ResetInfo = ConfigPtr; - // Get SB800 MMIO Base (AcpiMmioAddr) - WriteIo8(0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); - Data16 = Data8 << 8; - WriteIo8(0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); - Data16 |= Data8; - AcpiMmioAddr = (UINT32)Data16 << 16; - Status = AGESA_UNSUPPORTED; + AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR; GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - switch (ResetInfo->ResetId) - { - case 4: - switch (ResetInfo->ResetControl) { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 |= BIT6; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 - Status = AGESA_SUCCESS; - break; - } + Status = AGESA_UNSUPPORTED; + switch (ResetInfo->ResetId) { + case 4: + switch (ResetInfo->ResetControl) { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); + Data8 &= ~(UINT8)BIT6; + /* MXM_GPIO0. GPIO21 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); + Data8 |= BIT6; + /* MXM_GPIO0. GPIO21 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); + Status = AGESA_SUCCESS; break; - case 6: - switch (ResetInfo->ResetControl) { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); - Data8 |= BIT6; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 - Status = AGESA_SUCCESS; - break; - } + } + break; + case 6: + switch (ResetInfo->ResetControl) { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); + Data8 &= ~(UINT8)BIT6; + /* PCIE_RST#_LAN, GPIO25 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); + Status = AGESA_SUCCESS; break; - case 7: - switch (ResetInfo->ResetControl) { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); - Data8 |= BIT6; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 - Status = AGESA_SUCCESS; - break; - } + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); + Data8 |= BIT6; + /* PCIE_RST#_LAN, GPIO25 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); + Status = AGESA_SUCCESS; break; + } + break; + case 7: + switch (ResetInfo->ResetControl) { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); + Data8 &= ~(UINT8)BIT6; + /* MPCIE_RST0, GPIO02 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); + Data8 |= BIT6; + /* MPCIE_RST0, GPIO02 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); + Status = AGESA_SUCCESS; + break; + } + break; } - return Status; + return Status; } diff --git a/src/mainboard/amd/inagua/mainboard.c b/src/mainboard/amd/inagua/mainboard.c index 83fe394be7..47a267b323 100644 --- a/src/mainboard/amd/inagua/mainboard.c +++ b/src/mainboard/amd/inagua/mainboard.c @@ -16,7 +16,6 @@ #include #include #include -#include /* Platform Specific Definitions */ static void init_gpios(void) { @@ -34,16 +33,15 @@ static void init_gpios(void) /* Multi-function pins switch to GPIO0-35, these pins are shared with * PCI pins, make sure Hudson PCI device is disabled. */ - RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 1); + pm_write8(0xea, (pm_read8(0xea) & 0xfe) | 1); /* select IOMux to function1/2, corresponds to GPIO */ - RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG32, AccWidthUint8, ~(BIT0 | BIT1), 1); - RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG50, AccWidthUint8, ~(BIT0 | BIT1), 2); - + iomux_write8(0x32, (iomux_read8(0x32) & 0xfc) | 1); + iomux_write8(0x50, (iomux_read8(0x50) & 0xfc) | 2); /* output low */ - RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG32, AccWidthUint8, ~(0xFF), 0x48); - RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG50, AccWidthUint8, ~(0xFF), 0x48); + gpio_100_write8(0x20, 0x48); + gpio_100_write8(0x32, 0x48); } diff --git a/src/mainboard/amd/lamar/romstage.c b/src/mainboard/amd/lamar/romstage.c index a22b247f27..66188bdc1c 100644 --- a/src/mainboard/amd/lamar/romstage.c +++ b/src/mainboard/amd/lamar/romstage.c @@ -14,6 +14,7 @@ */ #include +#include #include #include #include @@ -28,25 +29,8 @@ static void romstage_main_template(void) { - u32 val; - - /* - * In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for - * LpcClk[1:0]". This following register setting has been - * replicated in every reference design since Parmer, so it is - * believed to be required even though it is not documented in - * the SoC BKDGs. Without this setting, there is no serial - * output. - */ - outb(0xD2, 0xcd6); - outb(0x00, 0xcd7); - - hudson_lpc_decode(); - - outb(0x24, 0xCD6); - outb(0x01, 0xCD7); - *(volatile u32 *) (AMD_SB_ACPI_MMIO_ADDR + 0xE00 + 0x28) |= 1 << 18; /* 24Mhz */ - *(volatile u32 *) (AMD_SB_ACPI_MMIO_ADDR + 0xE00 + 0x40) &= ~(1 << 2); /* 24Mhz */ + misc_write32(0x28, misc_read32(0x28) | (1 << 18)); /* 24Mhz */ + misc_write32(0x40, misc_read32(0x40) & (~(1 << 2))); /* 24Mhz */ if (!cpu_init_detectedx) { post_code(0x30); diff --git a/src/mainboard/amd/olivehill/romstage.c b/src/mainboard/amd/olivehill/romstage.c index 122bb19e3d..dfe7c49f9f 100644 --- a/src/mainboard/amd/olivehill/romstage.c +++ b/src/mainboard/amd/olivehill/romstage.c @@ -14,6 +14,7 @@ */ #include +#include #include #include #include @@ -30,12 +31,10 @@ void board_BeforeAgesa(struct sysinfo *cb) * even though the register is not documented in the Kabini BKDG. * Otherwise the serial output is bad code. */ - outb(0xD2, 0xcd6); - outb(0x00, 0xcd7); + pm_io_write8(0xd2, 0); /* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */ - outb(0xea, 0xcd6); - outb(0x1, 0xcd7); + pm_io_write8(0xea, 1); /* Set LPC decode enables. */ pci_devfn_t dev = PCI_DEV(0, 0x14, 3); diff --git a/src/mainboard/amd/olivehillplus/romstage.c b/src/mainboard/amd/olivehillplus/romstage.c index 3dd7d531eb..4d7db013ee 100644 --- a/src/mainboard/amd/olivehillplus/romstage.c +++ b/src/mainboard/amd/olivehillplus/romstage.c @@ -14,6 +14,7 @@ */ #include +#include #include #include #include @@ -34,8 +35,7 @@ static void romstage_main_template(void) * the SoC BKDGs. Without this setting, there is no serial * output. */ - outb(0xD2, 0xcd6); - outb(0x00, 0xcd7); + pm_io_write8(0xd2, 0); if (!cpu_init_detectedx && boot_cpu()) { post_code(0x30); @@ -64,6 +64,5 @@ static void romstage_main_template(void) void agesa_postcar(struct sysinfo *cb) { /* After AMD_INIT_ENV -> move to ramstage ? */ - outb(0xEA, 0xCD6); - outb(0x1, 0xcd7); + pm_io_write8(0xea, 1); } diff --git a/src/mainboard/amd/persimmon/BiosCallOuts.c b/src/mainboard/amd/persimmon/BiosCallOuts.c index 60ce3ee3a5..23a0e9f1e6 100644 --- a/src/mainboard/amd/persimmon/BiosCallOuts.c +++ b/src/mainboard/amd/persimmon/BiosCallOuts.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include @@ -60,11 +61,9 @@ static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *Confi FcnData = Data; ResetInfo = ConfigPtr; // Get SB800 MMIO Base (AcpiMmioAddr) - WriteIo8(0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); + Data8 = pm_io_read8(0x27); Data16 = Data8 << 8; - WriteIo8(0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); + Data8 = pm_io_read8(0x26); Data16 |= Data8; AcpiMmioAddr = (UINT32)Data16 << 16; Status = AGESA_UNSUPPORTED; diff --git a/src/mainboard/amd/persimmon/mainboard.c b/src/mainboard/amd/persimmon/mainboard.c index 0e89ffde05..6ca8a80771 100644 --- a/src/mainboard/amd/persimmon/mainboard.c +++ b/src/mainboard/amd/persimmon/mainboard.c @@ -126,12 +126,11 @@ static void mainboard_enable(struct device *dev) /* enable GPP CLK0 thru CLK1 */ /* disable GPP CLK2 thru SLT_GFX_CLK */ - u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - write8(misc_mem_clk_cntrl + 0, 0xFF); - write8(misc_mem_clk_cntrl + 1, 0x00); - write8(misc_mem_clk_cntrl + 2, 0x00); - write8(misc_mem_clk_cntrl + 3, 0x00); - write8(misc_mem_clk_cntrl + 4, 0x00); + misc_write8(0, 0xff); + misc_write8(1, 0); + misc_write8(2, 0); + misc_write8(3, 0); + misc_write8(4, 0); /* * Initialize ASF registers to an arbitrary address because someone diff --git a/src/mainboard/amd/south_station/BiosCallOuts.c b/src/mainboard/amd/south_station/BiosCallOuts.c index ecb7e1cfd6..45a40b497b 100644 --- a/src/mainboard/amd/south_station/BiosCallOuts.c +++ b/src/mainboard/amd/south_station/BiosCallOuts.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include @@ -37,166 +38,151 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] = }; const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); -/* Call the host environment interface to provide a user hook opportunity. */ +/* Call the host environment interface to provide a user hook opportunity. */ static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr) { - AGESA_STATUS Status; - UINTN FcnData; - MEM_DATA_STRUCT *MemData; - UINT32 AcpiMmioAddr; - UINT32 GpioMmioAddr; - UINT8 Data8; - UINT16 Data16; - UINT8 TempData8; + AGESA_STATUS Status; + UINTN FcnData; + MEM_DATA_STRUCT *MemData; + UINT32 AcpiMmioAddr; + UINT32 GpioMmioAddr; + UINT8 Data8; + UINT8 TempData8; - FcnData = Data; - MemData = ConfigPtr; + FcnData = Data; + MemData = ConfigPtr; - Status = AGESA_SUCCESS; - /* Get SB MMIO Base (AcpiMmioAddr) */ - WriteIo8 (0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); - Data16 = Data8 << 8; - WriteIo8 (0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); - Data16 |= Data8; - AcpiMmioAddr = (UINT32)Data16 << 16; - GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; + Status = AGESA_SUCCESS; + AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR; + GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~BIT5; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - TempData8 &= 0x03; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~BIT5; + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + TempData8 &= 0x03; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); - Data8 |= BIT2+BIT3; - Data8 &= ~BIT4; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - TempData8 &= 0x23; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); + Data8 |= BIT2+BIT3; + Data8 &= ~BIT4; + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + TempData8 &= 0x23; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~BIT5; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - TempData8 &= 0x03; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~BIT5; + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + TempData8 &= 0x03; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); - Data8 |= BIT2+BIT3; - Data8 &= ~BIT4; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - TempData8 &= 0x23; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); + Data8 |= BIT2+BIT3; + Data8 &= ~BIT4; + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + TempData8 &= 0x23; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); - switch(MemData->ParameterListPtr->DDR3Voltage){ - case VOLT1_35: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 |= (UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - break; - case VOLT1_25: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - break; - case VOLT1_5: - default: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 |= (UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - } - return Status; + switch (MemData->ParameterListPtr->DDR3Voltage) { + case VOLT1_35: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 |= (UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + break; + case VOLT1_25: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + break; + case VOLT1_5: + default: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 |= (UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + } + return Status; } /* PCIE slot reset control */ static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr) { - AGESA_STATUS Status; - UINTN FcnData; - PCIe_SLOT_RESET_INFO *ResetInfo; + AGESA_STATUS Status; + UINTN FcnData; + PCIe_SLOT_RESET_INFO *ResetInfo; + UINT32 GpioMmioAddr; + UINT32 AcpiMmioAddr; + UINT8 Data8; - UINT32 GpioMmioAddr; - UINT32 AcpiMmioAddr; - UINT8 Data8; - UINT16 Data16; - - FcnData = Data; - ResetInfo = ConfigPtr; - // Get SB800 MMIO Base (AcpiMmioAddr) - WriteIo8(0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); - Data16 = Data8 << 8; - WriteIo8(0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); - Data16 |= Data8; - AcpiMmioAddr = (UINT32)Data16 << 16; - Status = AGESA_UNSUPPORTED; - GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - switch (ResetInfo->ResetId) - { - case 4: - switch (ResetInfo->ResetControl) - { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 |= BIT6; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 - Status = AGESA_SUCCESS; - break; - } - break; - case 6: - switch (ResetInfo->ResetControl) - { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); - Data8 |= BIT6; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 - Status = AGESA_SUCCESS; - break; - } - break; - case 7: - switch (ResetInfo->ResetControl) - { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); - Data8 |= BIT6; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 - Status = AGESA_SUCCESS; - break; - } - break; - } - return Status; + FcnData = Data; + ResetInfo = ConfigPtr; + AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR; + GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; + Status = AGESA_UNSUPPORTED; + switch (ResetInfo->ResetId) { + case 4: + switch (ResetInfo->ResetControl) { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); + Data8 &= ~(UINT8)BIT6; + /* MXM_GPIO0. GPIO21 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); + Data8 |= BIT6; + /* MXM_GPIO0. GPIO21 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); + Status = AGESA_SUCCESS; + break; + } + break; + case 6: + switch (ResetInfo->ResetControl) { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); + Data8 &= ~(UINT8)BIT6; + /* PCIE_RST#_LAN, GPIO25 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); + Data8 |= BIT6; + /* PCIE_RST#_LAN, GPIO25 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); + Status = AGESA_SUCCESS; + break; + } + break; + case 7: + switch (ResetInfo->ResetControl) { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); + Data8 &= ~(UINT8)BIT6; + /* MPCIE_RST0, GPIO02 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); + Data8 |= BIT6; + /* MPCIE_RST0, GPIO02 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); + Status = AGESA_SUCCESS; + break; + } + break; + } + return Status; } diff --git a/src/mainboard/amd/south_station/mainboard.c b/src/mainboard/amd/south_station/mainboard.c index 9b041e0111..d9e4c5ff1a 100644 --- a/src/mainboard/amd/south_station/mainboard.c +++ b/src/mainboard/amd/south_station/mainboard.c @@ -17,7 +17,6 @@ #include #include #include -#include /* Platform Specific Definitions */ /** * Southstation using SB GPIO 17/18 to control the Red/Green LED @@ -25,26 +24,21 @@ */ static void southstation_led_init(void) { -#define GPIO_FUNCTION 2 //GPIO function -#define SB_GPIO_REG17 17 //Red Light -#define SB_GPIO_REG18 18 //Green Light - /* multi-function pins switch to GPIO0-35 */ - RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 1); + pm_write8(0xea, (pm_read8(0xea) & 0xfe) | 1); /* select IOMux to function2, corresponds to GPIO */ - RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG17, AccWidthUint8, ~(BIT0 | BIT1), GPIO_FUNCTION); - RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG18, AccWidthUint8, ~(BIT0 | BIT1), GPIO_FUNCTION); + iomux_write8(0x11, (iomux_read8(0x11) & 0xfc) | 2); + iomux_write8(0x12, (iomux_read8(0x12) & 0xfc) | 2); /* Lighting test */ - RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG17, AccWidthUint8, ~(0xFF), 0x08); //output high - RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG18, AccWidthUint8, ~(0xFF), 0x08); + gpio_100_write8(0x11, 0x08); //output high + gpio_100_write8(0x12, 0x08); mdelay(100); - RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG17, AccWidthUint8, ~(0xFF), 0x48); //output low - RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG18, AccWidthUint8, ~(0xFF), 0x48); + gpio_100_write8(0x11, 0x48); //output low + gpio_100_write8(0x12, 0x48); } - /********************************************** * Enable the dedicated functions of the board. **********************************************/ diff --git a/src/mainboard/amd/thatcher/romstage.c b/src/mainboard/amd/thatcher/romstage.c index 0a2821ba60..dff516ca3a 100644 --- a/src/mainboard/amd/thatcher/romstage.c +++ b/src/mainboard/amd/thatcher/romstage.c @@ -14,6 +14,7 @@ */ #include +#include #include #include #include @@ -47,9 +48,7 @@ void board_BeforeAgesa(struct sysinfo *cb) post_code(0x31); lpc47n217_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - outb(0x24, 0xcd6); - outb(0x1, 0xcd7); - outb(0xea, 0xcd6); - outb(0x1, 0xcd7); + pm_io_write8(0x24, 1); + pm_io_write8(0xea, 1); gpio_100_write8(0x1, 0x98); } diff --git a/src/mainboard/amd/union_station/BiosCallOuts.c b/src/mainboard/amd/union_station/BiosCallOuts.c index ecb7e1cfd6..c701a7e4e2 100644 --- a/src/mainboard/amd/union_station/BiosCallOuts.c +++ b/src/mainboard/amd/union_station/BiosCallOuts.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include @@ -37,166 +38,151 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] = }; const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); -/* Call the host environment interface to provide a user hook opportunity. */ +/* Call the host environment interface to provide a user hook opportunity. */ static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr) { - AGESA_STATUS Status; - UINTN FcnData; - MEM_DATA_STRUCT *MemData; - UINT32 AcpiMmioAddr; - UINT32 GpioMmioAddr; - UINT8 Data8; - UINT16 Data16; - UINT8 TempData8; + AGESA_STATUS Status; + UINTN FcnData; + MEM_DATA_STRUCT *MemData; + UINT32 AcpiMmioAddr; + UINT32 GpioMmioAddr; + UINT8 Data8; + UINT8 TempData8; - FcnData = Data; - MemData = ConfigPtr; + FcnData = Data; + MemData = ConfigPtr; - Status = AGESA_SUCCESS; - /* Get SB MMIO Base (AcpiMmioAddr) */ - WriteIo8 (0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); - Data16 = Data8 << 8; - WriteIo8 (0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); - Data16 |= Data8; - AcpiMmioAddr = (UINT32)Data16 << 16; - GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; + Status = AGESA_SUCCESS; + AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR; + GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~BIT5; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - TempData8 &= 0x03; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~BIT5; + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + TempData8 &= 0x03; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); - Data8 |= BIT2+BIT3; - Data8 &= ~BIT4; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - TempData8 &= 0x23; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); + Data8 |= BIT2+BIT3; + Data8 &= ~BIT4; + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + TempData8 &= 0x23; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~BIT5; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - TempData8 &= 0x03; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~BIT5; + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + TempData8 &= 0x03; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); - Data8 |= BIT2+BIT3; - Data8 &= ~BIT4; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - TempData8 &= 0x23; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); + Data8 |= BIT2+BIT3; + Data8 &= ~BIT4; + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + TempData8 &= 0x23; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); - switch(MemData->ParameterListPtr->DDR3Voltage){ - case VOLT1_35: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 |= (UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - break; - case VOLT1_25: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - break; - case VOLT1_5: - default: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 |= (UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - } - return Status; + switch (MemData->ParameterListPtr->DDR3Voltage) { + case VOLT1_35: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 |= (UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + break; + case VOLT1_25: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + break; + case VOLT1_5: + default: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 |= (UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + } + return Status; } /* PCIE slot reset control */ static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr) { - AGESA_STATUS Status; - UINTN FcnData; - PCIe_SLOT_RESET_INFO *ResetInfo; + AGESA_STATUS Status; + UINTN FcnData; + PCIe_SLOT_RESET_INFO *ResetInfo; + UINT32 GpioMmioAddr; + UINT32 AcpiMmioAddr; + UINT8 Data8; - UINT32 GpioMmioAddr; - UINT32 AcpiMmioAddr; - UINT8 Data8; - UINT16 Data16; - - FcnData = Data; - ResetInfo = ConfigPtr; - // Get SB800 MMIO Base (AcpiMmioAddr) - WriteIo8(0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); - Data16 = Data8 << 8; - WriteIo8(0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); - Data16 |= Data8; - AcpiMmioAddr = (UINT32)Data16 << 16; - Status = AGESA_UNSUPPORTED; - GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - switch (ResetInfo->ResetId) - { - case 4: - switch (ResetInfo->ResetControl) - { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 |= BIT6; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 - Status = AGESA_SUCCESS; - break; - } - break; - case 6: - switch (ResetInfo->ResetControl) - { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); - Data8 |= BIT6; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 - Status = AGESA_SUCCESS; - break; - } - break; - case 7: - switch (ResetInfo->ResetControl) - { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); - Data8 |= BIT6; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 - Status = AGESA_SUCCESS; - break; - } - break; - } - return Status; + FcnData = Data; + ResetInfo = ConfigPtr; + AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR; + GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; + Status = AGESA_UNSUPPORTED; + switch (ResetInfo->ResetId) { + case 4: + switch (ResetInfo->ResetControl) { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); + Data8 &= ~(UINT8)BIT6; + /* MXM_GPIO0. GPIO21 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); + Data8 |= BIT6; + /* MXM_GPIO0. GPIO21 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); + Status = AGESA_SUCCESS; + break; + } + break; + case 6: + switch (ResetInfo->ResetControl) { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); + Data8 &= ~(UINT8)BIT6; + /* PCIE_RST#_LAN, GPIO25 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); + Data8 |= BIT6; + /* PCIE_RST#_LAN, GPIO25 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); + Status = AGESA_SUCCESS; + break; + } + break; + case 7: + switch (ResetInfo->ResetControl) { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); + Data8 &= ~(UINT8)BIT6; + /* MPCIE_RST0, GPIO02 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); + Data8 |= BIT6; + /* MPCIE_RST0, GPIO02 */ + Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); + Status = AGESA_SUCCESS; + break; + } + break; + } + return Status; } diff --git a/src/mainboard/asrock/e350m1/BiosCallOuts.c b/src/mainboard/asrock/e350m1/BiosCallOuts.c index 5d7211c3e6..c9ecad746a 100644 --- a/src/mainboard/asrock/e350m1/BiosCallOuts.c +++ b/src/mainboard/asrock/e350m1/BiosCallOuts.c @@ -15,6 +15,7 @@ #include #include +#include #include #include @@ -34,88 +35,81 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] = }; const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); -/* Call the host environment interface to provide a user hook opportunity. */ +/* Call the host environment interface to provide a user hook opportunity. */ static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr) { - AGESA_STATUS Status; - UINTN FcnData; - MEM_DATA_STRUCT *MemData; - UINT32 AcpiMmioAddr; - UINT32 GpioMmioAddr; - UINT8 Data8; - UINT16 Data16; - UINT8 TempData8; + AGESA_STATUS Status; + UINTN FcnData; + MEM_DATA_STRUCT *MemData; + UINT32 AcpiMmioAddr; + UINT32 GpioMmioAddr; + UINT8 Data8; + UINT8 TempData8; - FcnData = Data; - MemData = ConfigPtr; + FcnData = Data; + MemData = ConfigPtr; - Status = AGESA_SUCCESS; - /* Get SB800 MMIO Base (AcpiMmioAddr) */ - WriteIo8 (0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); - Data16 = Data8 << 8; - WriteIo8 (0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); - Data16 |= Data8; - AcpiMmioAddr = (UINT32)Data16 << 16; - GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; + Status = AGESA_SUCCESS; + AcpiMmioAddr = AMD_SB_ACPI_MMIO_ADDR; + GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~BIT5; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - TempData8 &= 0x03; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~BIT5; + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + TempData8 &= 0x03; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); - Data8 |= BIT2+BIT3; - Data8 &= ~BIT4; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - TempData8 &= 0x23; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~BIT5; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - TempData8 &= 0x03; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); - Data8 |= BIT2+BIT3; - Data8 &= ~BIT4; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - TempData8 &= 0x23; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); + Data8 |= BIT2+BIT3; + Data8 &= ~BIT4; + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + TempData8 &= 0x23; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~BIT5; + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + TempData8 &= 0x03; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); + Data8 |= BIT2+BIT3; + Data8 &= ~BIT4; + TempData8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + TempData8 &= 0x23; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); - /* this seems to be just copy-pasted from the AMD reference boards and needs - * some investigation - */ - switch(MemData->ParameterListPtr->DDR3Voltage){ - case VOLT1_35: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 |= (UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - break; - case VOLT1_25: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - break; - case VOLT1_5: - default: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 |= (UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - } - // disable memory clear for boot time reduction - MemData->ParameterListPtr->EnableMemClr = FALSE; - return Status; + /* + * this seems to be just copy-pasted from the AMD reference boards and + * needs some investigation + */ + switch (MemData->ParameterListPtr->DDR3Voltage) { + case VOLT1_35: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 |= (UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + break; + case VOLT1_25: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + break; + case VOLT1_5: + default: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 |= (UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + } + /* disable memory clear for boot time reduction */ + MemData->ParameterListPtr->EnableMemClr = FALSE; + return Status; } diff --git a/src/mainboard/asrock/e350m1/mainboard.c b/src/mainboard/asrock/e350m1/mainboard.c index e2f4f2b259..96744a39bd 100644 --- a/src/mainboard/asrock/e350m1/mainboard.c +++ b/src/mainboard/asrock/e350m1/mainboard.c @@ -26,19 +26,17 @@ static void mainboard_enable(struct device *dev) { printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - /* Power off unused clock pins of GPP PCIe devices */ - u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - /* + /* Power off unused clock pins of GPP PCIe devices * GPP CLK0 connected to unpopulated mini PCIe slot * GPP CLK1 connected to ethernet chip */ - write8(misc_mem_clk_cntrl + 0, 0xFF); + misc_write8(0, 0xff); /* GPP CLK2 connected to the external USB3 controller */ - write8(misc_mem_clk_cntrl + 1, 0x0F); - write8(misc_mem_clk_cntrl + 2, 0x00); - write8(misc_mem_clk_cntrl + 3, 0x00); + misc_write8(1, 0x0f); + misc_write8(2, 0); + misc_write8(3, 0); /* SLT_GFX_CLK connected to PCIe slot */ - write8(misc_mem_clk_cntrl + 4, 0xF0); + misc_write8(4, 0xf0); /* * Initialize ASF registers to an arbitrary address because someone diff --git a/src/mainboard/asrock/imb-a180/bootblock.c b/src/mainboard/asrock/imb-a180/bootblock.c index eb5641ff5e..e87dc21f87 100644 --- a/src/mainboard/asrock/imb-a180/bootblock.c +++ b/src/mainboard/asrock/imb-a180/bootblock.c @@ -21,20 +21,14 @@ void bootblock_mainboard_early_init(void) { - u32 reg32; - /* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */ pm_write8(0xea, 0x1); /* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */ - reg32 = misc_read32(0x28); - reg32 &= 0xfff8ffff; - misc_write32(0x28, reg32); + misc_write32(0x28, misc_read32(0x28) & 0xfff8ffff); /* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */ - reg32 = misc_read32(0x40); - reg32 &= 0xffffbffb; - misc_write32(0x40, reg32); + misc_write32(0x40, misc_read32(0x40) & 0xffffbffb); /* w83627uhg has a default clk of 48MHz, p.9 of data-sheet */ winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); diff --git a/src/mainboard/asus/am1i-a/bootblock.c b/src/mainboard/asus/am1i-a/bootblock.c index ddbf2aa548..2a3aabd7e9 100644 --- a/src/mainboard/asus/am1i-a/bootblock.c +++ b/src/mainboard/asus/am1i-a/bootblock.c @@ -113,7 +113,7 @@ static void ite_gpio_conf(pnp_devfn_t dev) void bootblock_mainboard_early_init(void) { - volatile u32 i, val; + u32 val, i; /* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */ pm_write8(0xea, 0x1); diff --git a/src/mainboard/asus/f2a85-m/bootblock.c b/src/mainboard/asus/f2a85-m/bootblock.c index 0472877dc0..3d980a663d 100644 --- a/src/mainboard/asus/f2a85-m/bootblock.c +++ b/src/mainboard/asus/f2a85-m/bootblock.c @@ -32,9 +32,7 @@ static void sbxxx_enable_48mhzout(void) reg32 |= 0x00100000; misc_write32(0x28, reg32); - reg32 = misc_read32(0x40); - reg32 &= ~0x80u; - misc_write32(0x40, reg32); + misc_write32(0x40, misc_read32(0x40) & (~0x80u)); } static void superio_init_m(void) diff --git a/src/mainboard/asus/f2a85-m/romstage.c b/src/mainboard/asus/f2a85-m/romstage.c index 3aa29c8ce3..5b7494d9ee 100644 --- a/src/mainboard/asus/f2a85-m/romstage.c +++ b/src/mainboard/asus/f2a85-m/romstage.c @@ -14,6 +14,7 @@ * GNU General Public License for more details. */ +#include #include #include #include @@ -26,10 +27,7 @@ void board_BeforeAgesa(struct sysinfo *cb) post_code(0x30); /* turn on secondary smbus at b20 */ - outb(0x28, 0xcd6); - byte = inb(0xcd7); - byte |= 1; - outb(byte, 0xcd7); + pm_write8(0x28, pm_read8(0x28) | 1); /* set DDR3 voltage */ byte = CONFIG_BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL; diff --git a/src/mainboard/bap/ode_e20XX/romstage.c b/src/mainboard/bap/ode_e20XX/romstage.c index 505de38d9e..c1b96f1273 100644 --- a/src/mainboard/bap/ode_e20XX/romstage.c +++ b/src/mainboard/bap/ode_e20XX/romstage.c @@ -16,6 +16,7 @@ */ #include +#include #include #include @@ -29,8 +30,7 @@ void board_BeforeAgesa(struct sysinfo *cb) { /* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */ - outb(0xea, 0xcd6); - outb(0x1, 0xcd7); + pm_io_write(0xea, 1); /* Set LPC decode enables. */ pci_devfn_t dev = PCI_DEV(0, 0x14, 3); diff --git a/src/mainboard/bap/ode_e21XX/romstage.c b/src/mainboard/bap/ode_e21XX/romstage.c index 9729ffb400..a60e571367 100644 --- a/src/mainboard/bap/ode_e21XX/romstage.c +++ b/src/mainboard/bap/ode_e21XX/romstage.c @@ -14,6 +14,7 @@ */ #include +#include #include #include #include @@ -38,8 +39,7 @@ static void romstage_main_template(void) * the SoC BKDGs. Without this setting, there is no serial * output. */ - outb(0xD2, 0xcd6); - outb(0x00, 0xcd7); + pm_io_write8(0xd2, 0); if (!cpu_init_detectedx && boot_cpu()) { post_code(0x30); @@ -52,6 +52,5 @@ static void romstage_main_template(void) void agesa_postcar(struct sysinfo *cb) { /* After AMD_INIT_ENV -> move to ramstage ? */ - outb(0xEA, 0xCD6); - outb(0x1, 0xcd7); + pm_io_write8(0xea, 1); } diff --git a/src/mainboard/biostar/a68n_5200/romstage.c b/src/mainboard/biostar/a68n_5200/romstage.c index 09098f7d8b..5e0cd7c83d 100644 --- a/src/mainboard/biostar/a68n_5200/romstage.c +++ b/src/mainboard/biostar/a68n_5200/romstage.c @@ -16,6 +16,7 @@ */ #include +#include #include #include #include @@ -32,13 +33,11 @@ static void sbxxx_enable_48mhzout(void) { /* most likely programming to 48MHz out signal */ - /* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */ u32 reg32; reg32 = misc_read32(0x28); reg32 &= 0xfff8ffff; misc_write32(0x28, reg32); - /* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */ reg32 = misc_read32(0x40); reg32 &= 0xffffbffb; misc_write32(0x40, reg32); @@ -49,8 +48,7 @@ void board_BeforeAgesa(struct sysinfo *cb) u8 byte; /* Enable the AcpiMmio space */ - outb(0x24, 0xcd6); - outb(0x1, 0xcd7); + pm_io_write8(0x24, 1); /* Set LPC decode enables. */ pci_devfn_t dev = PCI_DEV(0, 0x14, 3); diff --git a/src/mainboard/biostar/am1ml/bootblock.c b/src/mainboard/biostar/am1ml/bootblock.c index 771745e9bd..3eceaa782d 100644 --- a/src/mainboard/biostar/am1ml/bootblock.c +++ b/src/mainboard/biostar/am1ml/bootblock.c @@ -61,20 +61,14 @@ static void ite_gpio_conf(pnp_devfn_t dev) void bootblock_mainboard_early_init(void) { - u32 reg32; - /* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */ pm_write8(0xea, 0x1); /* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */ - reg32 = misc_read32(0x28); - reg32 &= 0xfff8ffff; - misc_write32(0x28, reg32); + misc_write32(0x28, misc_read32(0x28) & 0xfff8ffff); /* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */ - reg32 = misc_read32(0x40); - reg32 &= 0xffffbffb; - misc_write32(0x49, reg32); + misc_write32(0x40, misc_read32(0x40) & 0xffffbffb); /* Configure SIO as made under vendor BIOS */ ite_evc_conf(ENVC_DEV); diff --git a/src/mainboard/elmex/pcm205400/BiosCallOuts.c b/src/mainboard/elmex/pcm205400/BiosCallOuts.c index 6e2eaed80d..01f06bd765 100644 --- a/src/mainboard/elmex/pcm205400/BiosCallOuts.c +++ b/src/mainboard/elmex/pcm205400/BiosCallOuts.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include @@ -60,11 +61,9 @@ static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *Confi FcnData = Data; ResetInfo = ConfigPtr; // Get SB800 MMIO Base (AcpiMmioAddr) - WriteIo8(0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); + Data8 = pm_io_read8(0x27); Data16=Data8<<8; - WriteIo8(0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); + Data8 = pm_io_read8(0x26); Data16|=Data8; AcpiMmioAddr = (UINT32)Data16 << 16; Status = AGESA_UNSUPPORTED; diff --git a/src/mainboard/elmex/pcm205400/mainboard.c b/src/mainboard/elmex/pcm205400/mainboard.c index 0e89ffde05..6ca8a80771 100644 --- a/src/mainboard/elmex/pcm205400/mainboard.c +++ b/src/mainboard/elmex/pcm205400/mainboard.c @@ -126,12 +126,11 @@ static void mainboard_enable(struct device *dev) /* enable GPP CLK0 thru CLK1 */ /* disable GPP CLK2 thru SLT_GFX_CLK */ - u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - write8(misc_mem_clk_cntrl + 0, 0xFF); - write8(misc_mem_clk_cntrl + 1, 0x00); - write8(misc_mem_clk_cntrl + 2, 0x00); - write8(misc_mem_clk_cntrl + 3, 0x00); - write8(misc_mem_clk_cntrl + 4, 0x00); + misc_write8(0, 0xff); + misc_write8(1, 0); + misc_write8(2, 0); + misc_write8(3, 0); + misc_write8(4, 0); /* * Initialize ASF registers to an arbitrary address because someone diff --git a/src/mainboard/gizmosphere/gizmo/mainboard.c b/src/mainboard/gizmosphere/gizmo/mainboard.c index b65f56b074..63d94530e9 100644 --- a/src/mainboard/gizmosphere/gizmo/mainboard.c +++ b/src/mainboard/gizmosphere/gizmo/mainboard.c @@ -14,12 +14,12 @@ * GNU General Public License for more details. */ +#include #include #include #include #include #include -#include /********************************************** * Enable the dedicated functions of the board. @@ -30,18 +30,17 @@ static void mainboard_enable(struct device *dev) /* enable GPP CLK0 thru CLK1 */ /* disable GPP CLK2 thru SLT_GFX_CLK */ - u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - write8(misc_mem_clk_cntrl + 0, 0xFF); - write8(misc_mem_clk_cntrl + 1, 0x00); - write8(misc_mem_clk_cntrl + 2, 0x00); - write8(misc_mem_clk_cntrl + 3, 0x00); - write8(misc_mem_clk_cntrl + 4, 0x00); + misc_write8(0, 0xFF); + misc_write8(1, 0); + misc_write8(2, 0); + misc_write8(3, 0); + misc_write8(4, 0); /* * Force the onboard SATA port to GEN2 speed. * The offboard SATA port can remain at GEN3. */ - RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, 0xFB, 0x04); + pm_write8(0xda, (pm_read8(0xda) & 0xfb) | 0x04); } static void mainboard_final(void *chip_info) diff --git a/src/mainboard/gizmosphere/gizmo2/romstage.c b/src/mainboard/gizmosphere/gizmo2/romstage.c index 4676199b47..6312270712 100644 --- a/src/mainboard/gizmosphere/gizmo2/romstage.c +++ b/src/mainboard/gizmosphere/gizmo2/romstage.c @@ -13,6 +13,7 @@ * GNU General Public License for more details. */ +#include #include #include #include @@ -29,21 +30,5 @@ void board_BeforeAgesa(struct sysinfo *cb) * even though the register is not documented in the Kabini BKDG. * Otherwise the serial output is bad code. */ - outb(0xD2, 0xcd6); - outb(0x00, 0xcd7); + pm_io_write8(0xd2, 0); } - -#if 0 - /* LPC clock? Should happen before enable_serial. */ - - /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */ - int i; - for(i = 0; i < 200000; i++) - val = inb(0xcd6); -#endif - -#if 0 - /* Was before copy_and_run. */ - outb(0xEA, 0xCD6); - outb(0x1, 0xcd7); -#endif diff --git a/src/mainboard/hp/abm/romstage.c b/src/mainboard/hp/abm/romstage.c index 079bd7b786..5092e1772f 100644 --- a/src/mainboard/hp/abm/romstage.c +++ b/src/mainboard/hp/abm/romstage.c @@ -14,6 +14,7 @@ * GNU General Public License for more details. */ +#include #include #include #include @@ -26,7 +27,7 @@ void board_BeforeAgesa(struct sysinfo *cb) { - u32 reg32; + u32 t32; /* For serial port option, plug-in card on LPC. */ pci_devfn_t dev = PCI_DEV(0, 0x14, 3); @@ -37,32 +38,21 @@ void board_BeforeAgesa(struct sysinfo *cb) * even though the register is not documented in the Kabini BKDG. * Otherwise the serial output is bad code. */ - outb(0xD2, 0xcd6); - outb(0x00, 0xcd7); - + pm_io_write8(0xd2, 0); /* Enable the AcpiMmio space */ - outb(0x24, 0xcd6); - outb(0x01, 0xcd7); + pm_io_write8(0x24, 1); /* Set auxiliary output clock frequency on OSCOUT1 pin to be 25MHz */ /* Set auxiliary output clock frequency on OSCOUT2 pin to be 48MHz */ - reg32 = misc_read32(0x28); - reg32 &= 0xffc0ffff; // Clr bits [21:19] & [18:16] - reg32 |= 0x00010000; // Set bit 16 for 25MHz - misc_write32(0x28, reg32); + t32 = misc_read32(0x28); + t32 &= 0xffc0ffff; // Clr bits [21:19] & [18:16] + t32 |= 0x00010000; // Set bit 16 for 25MHz + misc_write(0x28, t32); /* Enable Auxiliary OSCOUT1/OSCOUT2 */ - reg32 = misc_read32(0x40; - reg32 &= 0xffffff7b; // clear 2, 7 - misc_write32(0x40, reg32); + t32 = misc_write32(0x40, misc_read32(0x40) & 0xffffff7b); nct5104d_enable_uartd(SERIAL_DEV); nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); } - -#if 0 - /* Was before copy_and_run. */ - outb(0xEA, 0xCD6); - outb(0x1, 0xcd7); -#endif diff --git a/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c b/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c index 86999fbab4..c2227ae935 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c +++ b/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c @@ -17,6 +17,7 @@ #include #include +#include #include #include #include @@ -63,11 +64,9 @@ static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *Confi FcnData = Data; ResetInfo = ConfigPtr; /* Get SB800 MMIO Base (AcpiMmioAddr) */ - WriteIo8(0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); + Data8 = pm_io_read8(0x27); Data16 = Data8 << 8; - WriteIo8(0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); + Data8 = pm_io_read8(0x26); Data16 |= Data8; AcpiMmioAddr = (uint32_t)Data16 << 16; Status = AGESA_UNSUPPORTED; diff --git a/src/mainboard/jetway/nf81-t56n-lf/mainboard.c b/src/mainboard/jetway/nf81-t56n-lf/mainboard.c index 0a12c3f66a..cbf75a49ce 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/mainboard.c +++ b/src/mainboard/jetway/nf81-t56n-lf/mainboard.c @@ -128,12 +128,11 @@ static void mainboard_enable(struct device *dev) /* enable GPP CLK0 thru CLK3 (interleaved) */ /* disable GPP CLK4 thru SLT_GFX_CLK */ - u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - write8(misc_mem_clk_cntrl + 0, 0xFF); - write8(misc_mem_clk_cntrl + 1, 0xFF); - write8(misc_mem_clk_cntrl + 2, 0x00); - write8(misc_mem_clk_cntrl + 3, 0x00); - write8(misc_mem_clk_cntrl + 4, 0x00); + misc_write8(0, 0xff); + misc_write8(1, 0xff); + misc_write8(2, 0); + misc_write8(3, 0); + misc_write8(4, 0); /* * Initialize ASF registers to an arbitrary address because someone diff --git a/src/mainboard/lippert/frontrunner-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/mainboard.c index 6ad5234d81..9e3eab7a6c 100644 --- a/src/mainboard/lippert/frontrunner-af/mainboard.c +++ b/src/mainboard/lippert/frontrunner-af/mainboard.c @@ -59,32 +59,41 @@ static const u16 sio_init_table[] = { // hi = offset, lo = value static void init(struct device *dev) { - volatile u8 *spi_base; // base addr of Hudson's SPI host controller + volatile u8 *spi_base; /* base addr of Hudson's SPI host controller */ int i; printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__); /* Init Hudson GPIOs. */ printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE); - FCH_IOMUX(50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices - FCH_GPIO (50) = 0xC0; // = output set to 1 as it's never needed - FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS# = input (int. PU) - FCH_IOMUX(56) = 1; // GPIO58-56: REV_ID2-0 - FCH_GPIO (56) = 0x28; // = inputs, disable int. pull-ups - FCH_IOMUX(57) = 1; - FCH_GPIO (57) = 0x28; - FCH_IOMUX(58) = 1; - FCH_GPIO (58) = 0x28; - FCH_IOMUX(96) = 1; // "Gpio96": GEVENT0# signal on X2 connector (int. PU) - FCH_IOMUX(52) = 1; // GPIO52,61,62,187-192 free to use on X2 connector - FCH_IOMUX(61) = 2; // default to inputs with int. PU - FCH_IOMUX(62) = 2; - FCH_IOMUX(187) = 2; - FCH_IOMUX(188) = 2; - FCH_IOMUX(189) = 1; - FCH_IOMUX(190) = 1; - FCH_IOMUX(191) = 1; - FCH_IOMUX(192) = 1; - if (!fch_gpio_state(197)) // just in case anyone cares + /* GPIO50: FCH_ARST#_GATE resets stuck PCIe devices */ + iomux_write8(50, 2); + /* output set to 1 as it's never needed */ + iomux_write8(50, 0xc0); + /* GPIO197: BIOS_DEFAULTS# = input (int. PU) */ + iomux_write8(197, 2); + /* GPIO58-56: REV_ID2-0 */ + iomux_write8(56, 1); + /* inputs, disable int. pull-ups */ + gpio_100_write8(56, 0x28); + iomux_write8(57, 1); + gpio_100_write8(57, 0x28); + iomux_write8(58, 1); + gpio_100_write8(58, 0x28); + /* "Gpio96": GEVENT0# signal on X2 connector (int. PU) */ + iomux_write8(96, 1); + /* GPIO52,61,62,187-192 free to use on X2 connector */ + iomux_write8(52, 1); + /* default to inputs with int. PU */ + iomux_write8(61, 2); + iomux_write8(62, 2); + iomux_write8(187, 2); + iomux_write8(188, 2); + iomux_write8(189, 1); + iomux_write8(190, 1); + iomux_write8(191, 1); + iomux_write8(192, 1); + /* just in case anyone cares */ + if (!fch_gpio_state(197)) printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n"); printk(BIOS_INFO, "Board revision ID: %u\n", fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56)); @@ -99,9 +108,11 @@ static void init(struct device *dev) /* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */ spi_base = (u8 *)((uintptr_t)pci_read_config32(pcidev_on_root(0x14, 3), 0xA0) & 0xFFFFFFE0); - spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register + /* NormSpeed in SPI_Cntrl1 register */ + spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; - /* Notify the SMC we're alive and kicking, or after a while it will + /* + * Notify the SMC we're alive and kicking, or after a while it will * effect a power cycle and switch to the alternate BIOS chip. * Should be done as late as possible. * Failure here does not matter if watchdog was already disabled, @@ -122,12 +133,11 @@ static void mainboard_enable(struct device *dev) /* enable GPP CLK0 */ /* disable GPP CLK1 thru SLT_GFX_CLK */ - u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - write8(misc_mem_clk_cntrl + 0, 0x0F); - write8(misc_mem_clk_cntrl + 1, 0x00); - write8(misc_mem_clk_cntrl + 2, 0x00); - write8(misc_mem_clk_cntrl + 3, 0x00); - write8(misc_mem_clk_cntrl + 4, 0x00); + misc_write8(0, 0x0f); + misc_write8(1, 0); + misc_write8(2, 0); + misc_write8(3, 0); + misc_write8(4, 0); /* * Initialize ASF registers to an arbitrary address because someone diff --git a/src/mainboard/lippert/toucan-af/mainboard.c b/src/mainboard/lippert/toucan-af/mainboard.c index 1c9c5a6b91..158613fcac 100644 --- a/src/mainboard/lippert/toucan-af/mainboard.c +++ b/src/mainboard/lippert/toucan-af/mainboard.c @@ -27,36 +27,52 @@ static void init(struct device *dev) { - volatile u8 *spi_base; // base addr of Hudson's SPI host controller + volatile u8 *spi_base; /* base addr of Hudson's SPI host controller */ printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__); /* Init Hudson GPIOs. */ printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE); - FCH_IOMUX(50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices - FCH_GPIO (50) = 0xC0; // = output set to 1 as it's never needed - FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS# - FCH_GPIO (197) = 0x28; // = input, disable int. pull-up - FCH_IOMUX(56) = 1; // GPIO58-56: REV_ID2-0 - FCH_GPIO (56) = 0x28; // = inputs, disable int. pull-ups - FCH_IOMUX(57) = 1; - FCH_GPIO (57) = 0x28; - FCH_IOMUX(58) = 1; - FCH_GPIO (58) = 0x28; - FCH_IOMUX(187) = 2; // GPIO187,188,166,GPO160: GPO0-3 on COM Express connector - FCH_GPIO (187) = 0x08; // = outputs, disable PUs, default to 0 - FCH_IOMUX(188) = 2; - FCH_GPIO (188) = 0x08; - FCH_IOMUX(166) = 2; - FCH_GPIO (166) = 0x08; - // needed to make GPO160 work (Hudson Register Reference section 2.3.6.1) - FCH_PMIO(0xDC) &= ~0x80; FCH_PMIO(0xE6) = (FCH_PMIO(0xE6) & ~0x02) | 0x01; - FCH_IOMUX(160) = 1; - FCH_GPIO (160) = 0x08; - FCH_IOMUX(189) = 1; // GPIO189-192: GPI0-3 on COM Express connector - FCH_IOMUX(190) = 1; // default to inputs with int. PU - FCH_IOMUX(191) = 1; - FCH_IOMUX(192) = 1; - if (!fch_gpio_state(197)) // just in case anyone cares + /* GPIO50: FCH_ARST#_GATE resets stuck PCIe devices */ + iomux_write8(50, 2); + /* output set to 1 as it's never needed */ + iomux_write8(50, 0xc0); + /* GPIO197: BIOS_DEFAULTS# = input (int. PU) */ + iomux_write8(197, 2); + /* input, disable int. pull-up */ + gpio_100_write8(197, 0x28); + /* GPIO58-56: REV_ID2-0 */ + iomux_write8(56, 1); + /* inputs, disable int. pull-ups */ + gpio_100_write8(56, 0x28); + iomux_write8(57, 1); + gpio_100_write8(57, 0x28); + iomux_write8(58, 1); + gpio_100_write8(58, 0x28); + /* GPIO187,188,166,GPO160: GPO0-3 on COM Express connector */ + iomux_write8(187, 2); + /* outputs, disable PUs, default to 0 */ + gpio_100_write8(187, 0x08); + iomux_write8(188, 2); + gpio_100_write8(188, 0x08); + iomux_write8(166, 2); + gpio_100_write8(166, 0x08); + /* + * needed to make GPO160 work (Hudson Register Reference + * section 2.3.6.1) + */ + pm_write8(0xdc, pm_read8(0xdc) & (~0x80)); + pm_write8(0xe6, (pm_read8(0xe6) & (~0x02)) | 1); + iomux_write8(160, 1); + gpio_100_write8(160, 0x08); + /* GPIO189-192: GPI0-3 on COM Express connector */ + iomux_write8(189, 1); + /* default to inputs with int. PU */ + iomux_write8(190, 1); + iomux_write8(191, 1); + iomux_write8(192, 1); + + /* just in case anyone cares */ + if (!fch_gpio_state(197)) printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n"); printk(BIOS_INFO, "Board revision ID: %u\n", fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56)); @@ -64,9 +80,11 @@ static void init(struct device *dev) /* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */ spi_base = (u8 *)((uintptr_t)pci_read_config32(pcidev_on_root(0x14, 3), 0xA0) & 0xFFFFFFE0); - spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register + /* NormSpeed in SPI_Cntrl1 register */ + spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; - /* Notify the SMC we're alive and kicking, or after a while it will + /* + * Notify the SMC we're alive and kicking, or after a while it will * effect a power cycle and switch to the alternate BIOS chip. * Should be done as late as possible. * Failure here does not matter if watchdog was already disabled, @@ -87,12 +105,11 @@ static void mainboard_enable(struct device *dev) /* enable GPP CLK0 thru CLK1 */ /* disable GPP CLK2 thru SLT_GFX_CLK */ - u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - write8(misc_mem_clk_cntrl + 0, 0xFF); - write8(misc_mem_clk_cntrl + 1, 0x00); - write8(misc_mem_clk_cntrl + 2, 0x00); - write8(misc_mem_clk_cntrl + 3, 0x00); - write8(misc_mem_clk_cntrl + 4, 0x00); + misc_write8(0, 0xff); + misc_write8(1, 0); + misc_write8(2, 0); + misc_write8(3, 0); + misc_write8(4, 0); /* * Initialize ASF registers to an arbitrary address because someone diff --git a/src/mainboard/pcengines/apu1/gpio_ftns.c b/src/mainboard/pcengines/apu1/gpio_ftns.c index 4e58d5593b..206dc63c9d 100644 --- a/src/mainboard/pcengines/apu1/gpio_ftns.c +++ b/src/mainboard/pcengines/apu1/gpio_ftns.c @@ -27,25 +27,21 @@ uintptr_t find_gpio_base(void) return base_addr; } -void configure_gpio(uintptr_t base_addr, u32 gpio, u8 iomux_ftn, u8 setting) +void configure_gpio(uintptr_t base_addr, u8 gpio, u8 iomux_ftn, u8 setting) { u8 bdata; - u8 *memptr; - memptr = (u8 *)(base_addr + IOMUX_OFFSET + gpio); - *memptr = iomux_ftn; + iomux_write8(gpio, iomux_ftn); - memptr = (u8 *)(base_addr + GPIO_OFFSET + gpio); - bdata = *memptr; + bdata = gpio_100_read8(gpio); bdata &= 0x07; bdata |= setting; /* set direction and data value */ - *memptr = bdata; + gpio_100_write8(gpio, bdata); } -u8 read_gpio(uintptr_t base_addr, u32 gpio) +u8 read_gpio(uintptr_t base_addr, u8 gpio) { - u8 *memptr = (u8 *)(base_addr + GPIO_OFFSET + gpio); - return (*memptr & GPIO_DATA_IN) ? 1 : 0; + return (gpio_100_read8(gpio) & GPIO_DATA_IN) ? 1 : 0; } int get_spd_offset(void) diff --git a/src/mainboard/pcengines/apu1/gpio_ftns.h b/src/mainboard/pcengines/apu1/gpio_ftns.h index fce8afe6f0..fb582721d2 100644 --- a/src/mainboard/pcengines/apu1/gpio_ftns.h +++ b/src/mainboard/pcengines/apu1/gpio_ftns.h @@ -19,8 +19,8 @@ #include uintptr_t find_gpio_base(void); -void configure_gpio(uintptr_t base_addr, u32 gpio, u8 iomux_ftn, u8 setting); -u8 read_gpio(uintptr_t base_addr, u32 gpio); +void configure_gpio(uintptr_t base_addr, u8 gpio, u8 iomux_ftn, u8 setting); +u8 read_gpio(uintptr_t base_addr, u8 gpio); int get_spd_offset(void); #define IOMUX_OFFSET 0xD00 diff --git a/src/mainboard/pcengines/apu1/mainboard.c b/src/mainboard/pcengines/apu1/mainboard.c index 854fb8ad4d..0528468e5d 100644 --- a/src/mainboard/pcengines/apu1/mainboard.c +++ b/src/mainboard/pcengines/apu1/mainboard.c @@ -14,6 +14,7 @@ * GNU General Public License for more details. */ +#include #include #include #include @@ -181,17 +182,17 @@ static void mainboard_enable(struct device *dev) config_gpio_mux(); config_addon_uart(); - /* Power off unused clock pins of GPP PCIe devices */ - u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - /* GPP CLK0-2 are connected to the 3 ethernet chips - * GPP CLK3-4 are connected to the miniPCIe slots */ - write8(misc_mem_clk_cntrl + 0, 0x21); - write8(misc_mem_clk_cntrl + 1, 0x43); + /* Power off unused clock pins of GPP PCIe devices + * GPP CLK0-2 are connected to the 3 ethernet chips + * GPP CLK3-4 are connected to the miniPCIe slots + */ + misc_write8(0, 0x21); + misc_write8(1, 0x43); /* GPP CLK5 is only connected to test pads -> disable */ - write8(misc_mem_clk_cntrl + 2, 0x05); + misc_write8(2, 0x05); /* disable unconnected GPP CLK6-8 and SLT_GFX_CLK */ - write8(misc_mem_clk_cntrl + 3, 0x00); - write8(misc_mem_clk_cntrl + 4, 0x00); + misc_write8(3, 0); + misc_write8(4, 0); /* Initialize the PIRQ data structures for consumption */ pirq_setup(); diff --git a/src/mainboard/pcengines/apu2/gpio_ftns.c b/src/mainboard/pcengines/apu2/gpio_ftns.c index 249ecc3494..170acca8d3 100644 --- a/src/mainboard/pcengines/apu2/gpio_ftns.c +++ b/src/mainboard/pcengines/apu2/gpio_ftns.c @@ -14,55 +14,75 @@ */ #include +#include +#include #include #include #include "gpio_ftns.h" -void configure_gpio(u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting) +static u32 gpio_read_wrapper(u32 gpio) +{ + if (gpio < 0x100) + return gpio0_read32(gpio & 0xff); + else if (gpio >= 0x100 && gpio < 0x200) + return gpio1_read32(gpio & 0xff); + else if (gpio >= 0x200 && gpio < 0x300) + return gpio2_read32(gpio & 0xff); + + die("Invalid GPIO"); +} + +static void gpio_write_wrapper(u32 gpio, u32 setting) +{ + if (gpio < 0x100) + gpio0_write32(gpio & 0xff, setting); + else if (gpio >= 0x100 && gpio < 0x200) + gpio1_write32(gpio & 0xff, setting); + else if (gpio >= 0x200 && gpio < 0x300) + gpio2_write32(gpio & 0xff, setting); +} + +void configure_gpio(u8 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting) { u32 bdata; - bdata = read32((const volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET - + gpio)); + bdata = gpio_read_wrapper(gpio); /* out the data value to prevent glitches */ bdata |= (setting & GPIO_OUTPUT_ENABLE); - write32((volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET + gpio), bdata); + gpio_write_wrapper(gpio, bdata); /* set direction and data value */ bdata |= (setting & (GPIO_OUTPUT_ENABLE | GPIO_OUTPUT_VALUE | GPIO_PULL_UP_ENABLE | GPIO_PULL_DOWN_ENABLE)); - write32((volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET + gpio), bdata); + gpio_write_wrapper(gpio, bdata); - write8((volatile void *)(ACPI_MMIO_BASE + IOMUX_OFFSET + iomux_gpio), - iomux_ftn & 0x3); + iomux_write8(iomux_gpio, iomux_ftn & 0x3); } u8 read_gpio(u32 gpio) { - u32 status = read32((const volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET - + gpio)); - - return (status & GPIO_PIN_STS) ? 1 : 0; + return (gpio_read_wrapper(gpio) & GPIO_PIN_STS) ? 1 : 0; } void write_gpio(u32 gpio, u8 value) { - u32 status = read32((const volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET - + gpio)); + u32 status = gpio_read_wrapper(gpio); status &= ~GPIO_OUTPUT_VALUE; status |= (value > 0) ? GPIO_OUTPUT_VALUE : 0; - write32((volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET + gpio), status); + gpio_write_wrapper(gpio, status); } int get_spd_offset(void) { u8 index = 0; - /* One SPD file contains all 4 options, determine which index to + /* + * One SPD file contains all 4 options, determine which index to * read here, then call into the standard routines. */ - u8 *gpio_bank0_ptr = (u8 *)(ACPI_MMIO_BASE + GPIO_BANK0_BASE); - if (*(gpio_bank0_ptr + (0x40 << 2) + 2) & BIT0) index |= BIT0; - if (*(gpio_bank0_ptr + (0x41 << 2) + 2) & BIT0) index |= BIT1; + if (gpio1_read8(0x02) & BIT0) + index |= BIT0; + if (gpio1_read8(0x06) & BIT0) + index |= BIT1; return index; } diff --git a/src/mainboard/pcengines/apu2/gpio_ftns.h b/src/mainboard/pcengines/apu2/gpio_ftns.h index 24d6a7f772..49169be121 100644 --- a/src/mainboard/pcengines/apu2/gpio_ftns.h +++ b/src/mainboard/pcengines/apu2/gpio_ftns.h @@ -16,7 +16,7 @@ #ifndef GPIO_FTNS_H #define GPIO_FTNS_H -void configure_gpio(u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting); +void configure_gpio(u8 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting); u8 read_gpio(u32 gpio); void write_gpio(u32 gpio, u8 value); int get_spd_offset(void); -- cgit v1.2.3