From ab6f016a43cf7d2667f5648dad72ca3d0df03d58 Mon Sep 17 00:00:00 2001 From: Serin Yeh Date: Wed, 27 Sep 2023 17:36:18 +0800 Subject: mb/google/brya/var/yavilla: Add VCM power control sequence Add VCM power control to configure 2.8V and reset pin, and VCM can be powered on/off properly. BUG=b:292907385 TEST=Run ITS test Change-Id: I242025836fd50076a40ffcc4e5d4a5d5bc6fb4d0 Signed-off-by: Serin Yeh Reviewed-on: https://review.coreboot.org/c/coreboot/+/78170 Reviewed-by: Derek Huang Tested-by: build bot (Jenkins) --- .../google/brya/variants/yavilla/overridetree.cb | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'src/mainboard') diff --git a/src/mainboard/google/brya/variants/yavilla/overridetree.cb b/src/mainboard/google/brya/variants/yavilla/overridetree.cb index d31a8f99fa..ee5a3b6b6a 100644 --- a/src/mainboard/google/brya/variants/yavilla/overridetree.cb +++ b/src/mainboard/google/brya/variants/yavilla/overridetree.cb @@ -375,12 +375,11 @@ chip soc/intel/alderlake register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" # WCAM_RST_L #_ON - register "on_seq.ops_cnt" = "5" + register "on_seq.ops_cnt" = "4" register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" - register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" - register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" #_OFF register "off_seq.ops_cnt" = "4" @@ -400,6 +399,22 @@ chip soc/intel/alderlake register "device_type" = "INTEL_ACPI_CAMERA_VCM" register "vcm_compat" = ""dongwoon,dw9714"" + register "has_power_resource" = "1" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" + + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_WCAM_X + register "gpio_panel.gpio[1].gpio_num" = "GPP_D3" # WCAM_RST_L + + #_ON + register "on_seq.ops_cnt" = "2" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + + #_OFF + register "off_seq.ops_cnt" = "2" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" device i2c 0C on probe WFC WFC_MIPI_OVTI8856 -- cgit v1.2.3