From a4f701e114a2b973e99d5de9a340f123c4b6877a Mon Sep 17 00:00:00 2001 From: Jonathon Hall Date: Tue, 20 Dec 2022 11:22:35 -0500 Subject: mb/purism/librem_cnl: Define CMOS layout for Librem Mini v1/v2 Define a CMOS layout for Librem Mini v1/v2 spanning both banks. The only setting provided is the automatic power-on setting, which is implemented by the EC. This can now be configured in a firmware image by replacing cmos.default in CBFS. Since cmos.default is applied early in bootblock, the EC BRAM interface must now be configured in bootblock, including opening the LPC I/O range. Change-Id: Ib0a4ea02d71f6f99e344484726a629e0552e4941 Signed-off-by: Jonathon Hall Reviewed-on: https://review.coreboot.org/c/coreboot/+/74363 Reviewed-by: Angel Pons Tested-by: build bot (Jenkins) --- src/mainboard/purism/librem_cnl/Kconfig | 10 +++++++ .../librem_cnl/variants/librem_mini/Makefile.inc | 1 + .../librem_cnl/variants/librem_mini/bootblock.c | 34 ++++++++++++++++++++++ .../librem_cnl/variants/librem_mini/cmos.default | 1 + .../librem_cnl/variants/librem_mini/cmos.layout | 18 ++++++++++++ 5 files changed, 64 insertions(+) create mode 100644 src/mainboard/purism/librem_cnl/variants/librem_mini/bootblock.c create mode 100644 src/mainboard/purism/librem_cnl/variants/librem_mini/cmos.default create mode 100644 src/mainboard/purism/librem_cnl/variants/librem_mini/cmos.layout (limited to 'src/mainboard') diff --git a/src/mainboard/purism/librem_cnl/Kconfig b/src/mainboard/purism/librem_cnl/Kconfig index 0c17ec967c..ef05a3ecb9 100644 --- a/src/mainboard/purism/librem_cnl/Kconfig +++ b/src/mainboard/purism/librem_cnl/Kconfig @@ -15,11 +15,15 @@ config BOARD_PURISM_BASEBOARD_LIBREM_CNL config BOARD_PURISM_LIBREM_MINI select BOARD_PURISM_BASEBOARD_LIBREM_CNL + select HAVE_CMOS_DEFAULT + select HAVE_OPTION_TABLE select SOC_INTEL_WHISKEYLAKE select SUPERIO_ITE_IT8528E config BOARD_PURISM_LIBREM_MINI_V2 select BOARD_PURISM_BASEBOARD_LIBREM_CNL + select HAVE_CMOS_DEFAULT + select HAVE_OPTION_TABLE select SOC_INTEL_COMETLAKE_1 select SUPERIO_ITE_IT8528E @@ -85,6 +89,12 @@ if BOARD_PURISM_LIBREM_MINI || BOARD_PURISM_LIBREM_MINI_V2 config PC_CMOS_BASE_PORT_BANK1 default 0x360 +config CMOS_LAYOUT_FILE + default "src/mainboard/\$(MAINBOARDDIR)/variants/librem_mini/cmos.layout" + +config CMOS_DEFAULT_FILE + default "src/mainboard/\$(MAINBOARDDIR)/variants/librem_mini/cmos.default" + endif config ENABLE_EC_UART1 diff --git a/src/mainboard/purism/librem_cnl/variants/librem_mini/Makefile.inc b/src/mainboard/purism/librem_cnl/variants/librem_mini/Makefile.inc index 20ff43819f..874cde1524 100644 --- a/src/mainboard/purism/librem_cnl/variants/librem_mini/Makefile.inc +++ b/src/mainboard/purism/librem_cnl/variants/librem_mini/Makefile.inc @@ -2,3 +2,4 @@ all-y += die.c smm-y += die.c +bootblock-y += bootblock.c diff --git a/src/mainboard/purism/librem_cnl/variants/librem_mini/bootblock.c b/src/mainboard/purism/librem_cnl/variants/librem_mini/bootblock.c new file mode 100644 index 0000000000..558815c618 --- /dev/null +++ b/src/mainboard/purism/librem_cnl/variants/librem_mini/bootblock.c @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include +#include +#include +#include + +void bootblock_mainboard_early_init(void) +{ + /* + * Enable the EC BRAM interface, and set bank 1's I/O BAR. + * BRAM on this board uses bank 0 from the PCH and bank 1 from the EC: + * + * - PCH bank 0 is used for the RTC. Either should work, but the PCH + * RTC was used historically, and it's preferable not to change this + * in an update. + * - EC bank 1 contains the automatic-power-on setting, which is useful + * to use the Mini as an appliance-like server. + * + * cmos.default can be used to configure the automatic power-on setting + * in firmware. We have to set up the BRAM interface in bootblock, + * because cmos.default is applied early in bootblock. + */ + const pnp_devfn_t ec_rtct_dev = PNP_DEV(0x2E, IT8528E_RTCT); + pnp_enter_conf_state(ec_rtct_dev); + pnp_set_logical_device(ec_rtct_dev); + pnp_set_enable(ec_rtct_dev, 1); + pnp_set_iobase(ec_rtct_dev, 0x62, CONFIG_PC_CMOS_BASE_PORT_BANK1); + pnp_exit_conf_state(ec_rtct_dev); + + /* Open the BRAM 1 bank interface on LPC */ + lpc_open_pmio_window(CONFIG_PC_CMOS_BASE_PORT_BANK1, 2); +} diff --git a/src/mainboard/purism/librem_cnl/variants/librem_mini/cmos.default b/src/mainboard/purism/librem_cnl/variants/librem_mini/cmos.default new file mode 100644 index 0000000000..1c414b3808 --- /dev/null +++ b/src/mainboard/purism/librem_cnl/variants/librem_mini/cmos.default @@ -0,0 +1 @@ +power_on_after_fail=Disable diff --git a/src/mainboard/purism/librem_cnl/variants/librem_mini/cmos.layout b/src/mainboard/purism/librem_cnl/variants/librem_mini/cmos.layout new file mode 100644 index 0000000000..454ea8b538 --- /dev/null +++ b/src/mainboard/purism/librem_cnl/variants/librem_mini/cmos.layout @@ -0,0 +1,18 @@ +## SPDX-License-Identifier: GPL-2.0-only + +entries + +# start-bit length config config-ID name +0 112 r 0 reserved_memory +1352 8 e 1 power_on_after_fail + +enumerations +#ID value text +1 0 Enable +1 1 Disable + +checksums + +# The EC firmware does initialize power_on_after_fail if it is invalid, but it +# does not have a checksum. Put a checksum at the end of bank 1. +checksum 1352 1359 1520 -- cgit v1.2.3