From 912d9ec158261d9fe2362b99a406ea2878c6b411 Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Mon, 30 Nov 2020 10:09:42 -0800 Subject: mb/google/volteer: Add additional SD cards to device list The initial commit only focused on GL9755S and RTS5261, but there were recently other cards added to the fw_config and those also need to be added to the probe lists. BUG=b:173207454 TEST=abuild google/volteer Change-Id: Ic27074a016ffbd4c4dd86104a6d85437357c4b82 Signed-off-by: Duncan Laurie Reviewed-on: https://review.coreboot.org/c/coreboot/+/48159 Tested-by: build bot (Jenkins) Reviewed-by: Sukumar Ghorai Reviewed-by: Tim Wawrzynczak --- src/mainboard/google/volteer/fw_config.c | 11 +++++++---- src/mainboard/google/volteer/variants/baseboard/devicetree.cb | 8 +++++++- 2 files changed, 14 insertions(+), 5 deletions(-) (limited to 'src/mainboard') diff --git a/src/mainboard/google/volteer/fw_config.c b/src/mainboard/google/volteer/fw_config.c index 5080d9b27d..c444b4c15a 100644 --- a/src/mainboard/google/volteer/fw_config.c +++ b/src/mainboard/google/volteer/fw_config.c @@ -66,7 +66,7 @@ static const struct pad_config i2s_disable_pads[] = { PAD_NC(GPP_R7, NONE), }; -static const struct pad_config sd_gl9755s_pads[] = { +static const struct pad_config sd_power_enable_pads[] = { PAD_CFG_GPO(GPP_D16, 1, DEEP), }; @@ -99,9 +99,12 @@ static void fw_config_handle(void *unused) gpio_configure_pads(dmic_enable_pads, ARRAY_SIZE(dmic_enable_pads)); gpio_configure_pads(sndw_disable_pads, ARRAY_SIZE(sndw_disable_pads)); } - if (fw_config_probe(FW_CONFIG(DB_SD, SD_GL9755S))) { - printk(BIOS_INFO, "Configure GPIOs for SD GL9755S.\n"); - gpio_configure_pads(sd_gl9755s_pads, ARRAY_SIZE(sd_gl9755s_pads)); + if (fw_config_probe(FW_CONFIG(DB_SD, SD_GL9755S)) || + fw_config_probe(FW_CONFIG(DB_SD, SD_RTS5227S)) || + fw_config_probe(FW_CONFIG(DB_SD, SD_GL9750)) || + fw_config_probe(FW_CONFIG(DB_SD, SD_OZ711LV2LN))) { + printk(BIOS_INFO, "Configure GPIOs for SD power enable.\n"); + gpio_configure_pads(sd_power_enable_pads, ARRAY_SIZE(sd_power_enable_pads)); } } BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL); diff --git a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb index bc1febb18f..455b9abed3 100644 --- a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb @@ -39,7 +39,7 @@ fw_config option SD_GL9755S 1 option SD_RTS5261 2 option SD_RTS5227S 3 - option SD_L9750 4 + option SD_GL9750 4 option SD_OZ711LV2LN 5 end field KB_LAYOUT 20 21 @@ -459,12 +459,18 @@ chip soc/intel/tigerlake device ref pcie_rp8 on probe DB_SD SD_GL9755S probe DB_SD SD_RTS5261 + probe DB_SD SD_RTS5227S + probe DB_SD SD_GL9750 + probe DB_SD SD_OZ711LV2LN chip soc/intel/common/block/pcie/rtd3 register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D16)" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H3)" register "srcclk_pin" = "3" device generic 0 on probe DB_SD SD_GL9755S + probe DB_SD SD_RTS5227S + probe DB_SD SD_GL9750 + probe DB_SD SD_OZ711LV2LN end end chip soc/intel/common/block/pcie/rtd3 -- cgit v1.2.3