From 90c3df7a211cb30445f1d6fa8f480a99c8f1e56e Mon Sep 17 00:00:00 2001 From: "jason.z.chen" Date: Thu, 11 May 2023 17:23:50 +0800 Subject: mb/google/rex/var/screebo: Add MIPI camera device Enabling MIPI UCAM for screebo project BUG=b:277883010 TEST=none Signed-off-by: jason.z.chen Change-Id: Id06e5c162d911a4bd78190757c25e7f760160a8f Reviewed-on: https://review.coreboot.org/c/coreboot/+/75157 Tested-by: build bot (Jenkins) Reviewed-by: Eric Lai Reviewed-by: Haikun Zhou Reviewed-by: Subrata Banik --- .../google/rex/variants/screebo/overridetree.cb | 77 ++++++++++++++++++++++ 1 file changed, 77 insertions(+) (limited to 'src/mainboard') diff --git a/src/mainboard/google/rex/variants/screebo/overridetree.cb b/src/mainboard/google/rex/variants/screebo/overridetree.cb index ec59b8ff64..ca4d9a9d73 100644 --- a/src/mainboard/google/rex/variants/screebo/overridetree.cb +++ b/src/mainboard/google/rex/variants/screebo/overridetree.cb @@ -330,6 +330,19 @@ chip soc/intel/meteorlake device generic 0 on end end end + device ref ipu on + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "1" + register "cio2_lanes_used" = "{4}" + register "cio2_lane_endpoint[0]" = ""^I2C5.CAM0"" + register "cio2_prt[0]" = "4" + device generic 0 on end + end + end device ref i2c3 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" @@ -362,6 +375,70 @@ chip soc/intel/meteorlake device spi 0 on end end # FPMCU end + device ref i2c5 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI08F4"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Ov 08X40 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + register "ssdb.lanes_used" = "4" + register "ssdb.link_used" = "1" + register "num_freq_entries" = "1" + register "link_freq[0]" = "400 * MHz" + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "IMGCLKOUT_2" + register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" + register "gpio_panel.gpio[1].gpio_num" = "GPP_A12" #EN_UCAM_PWR + register "gpio_panel.gpio[0].gpio_num" = "GPP_A11" #EN_UCAM_SENR_PWR + register "gpio_panel.gpio[2].gpio_num" = "GPP_V23" #UCAM_RST_L + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 36 on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "1" + register "acpi_name" = ""NVM0"" + register "chip_name" = ""M24C64X"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "has_power_resource" = "1" + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_A12" #EN_UCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + register "nvm_size" = "0x2000" + register "nvm_pagesize" = "1" + register "nvm_readonly" = "1" + register "nvm_width" = "0x10" + register "nvm_compat" = ""atmel,24c64"" + + device i2c 50 on end + end + end #I2C5 device ref soc_espi on chip ec/google/chromeec use conn0 as mux_conn[0] -- cgit v1.2.3