From 7fd1845991f2600e96eb7ba81e3af76a77470336 Mon Sep 17 00:00:00 2001 From: Tim Wawrzynczak Date: Tue, 9 Apr 2019 10:22:38 -0600 Subject: mb/google/ampton: Fix polarity of EN_PP3300_WLAN_L signal. WiFi enable signal was configured and driven as active-high, but the signal is |To start the server in this Emacs process, stop the existing actually active-low BUG=b:130196983 BRANCH=none TEST=Verified WiFi still works after boot, and also after a suspend/resume cycle. Device powers down correctly using "poweroff". Change-Id: I64a67f73564188ad0548a1a770169ef2bca47453 Signed-off-by: Tim Wawrzynczak Reviewed-on: https://review.coreboot.org/c/coreboot/+/32255 Reviewed-by: Furquan Shaikh Tested-by: build bot (Jenkins) --- src/mainboard/google/octopus/variants/ampton/gpio.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'src/mainboard') diff --git a/src/mainboard/google/octopus/variants/ampton/gpio.c b/src/mainboard/google/octopus/variants/ampton/gpio.c index 984dae0a8f..6044cd2785 100644 --- a/src/mainboard/google/octopus/variants/ampton/gpio.c +++ b/src/mainboard/google/octopus/variants/ampton/gpio.c @@ -246,7 +246,9 @@ static const struct pad_config gpio_table[] = { /* SCC COMMUNITY GPIOS */ PAD_NC(GPIO_176, UP_20K), /* SMB_ALERTB -- unused */ PAD_NC(GPIO_177, UP_20K), /* SMB_CLK -- unused */ - PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_178, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD), /* EN_PP3300_WLAN */ + /* EN_PP3300_WLAN_L */ + PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_178, 1, DEEP, NONE, Tx0RxDCRx0, + DISPUPD), PAD_NC(GPIO_179, NONE), /* SDCARD_CLK -- unused */ PAD_NC(GPIO_180, NONE), /* SDCARD_CMD -- unused */ PAD_NC(GPIO_181, UP_20K), /* SDCARD_D0 -- unused */ @@ -305,11 +307,11 @@ static const struct pad_config early_gpio_table[] = { PAD_CFG_NF(GPIO_83, NONE, DEEP, NF1), /* H1_SLAVE_SPI_MOSI_R */ /* Enable power to wifi early in bootblock and de-assert PERST#. */ - PAD_CFG_GPO(GPIO_178, 1, DEEP), /* EN_PP3300_WLAN */ + PAD_CFG_GPO(GPIO_178, 0, DEEP), /* EN_PP3300_WLAN_L */ PAD_CFG_GPO(GPIO_164, 0, DEEP), /* WLAN_PE_RST */ /* - * ESPI_IO1 acts as ALERT# (which is open-drain) and requies a weak + * ESPI_IO1 acts as ALERT# (which is open-drain) and requires a weak * pull-up for proper operation. Since there is no external pull present * on this platform, configure an internal weak pull-up. */ -- cgit v1.2.3