From 6efff741c2db51a80365fded19629f1b3a48bbfc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michael=20Niew=C3=B6hner?= Date: Sat, 19 Dec 2020 14:12:41 +0100 Subject: mb/clevo/l140cu: add panel settings to the dt and hook up GMA ACPI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the panel settings dumped from vendor firmware and hook up drivers/intel/gma, which will be required for brightness control. Keyboard brightness control still requires ACPI code. This will be done in a separate change later. Test: Panel gets enabled when the payload starts on Clevo L141CU. Change-Id: I7977a2271da72c142b025b4631318d1a39adfb13 Signed-off-by: Michael Niewöhner Reviewed-on: https://review.coreboot.org/c/coreboot/+/48750 Tested-by: build bot (Jenkins) Reviewed-by: Angel Pons --- src/mainboard/clevo/cml-u/dsdt.asl | 1 + src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb | 12 +++++++++++- 2 files changed, 12 insertions(+), 1 deletion(-) (limited to 'src/mainboard') diff --git a/src/mainboard/clevo/cml-u/dsdt.asl b/src/mainboard/clevo/cml-u/dsdt.asl index 7555246700..05e297b206 100644 --- a/src/mainboard/clevo/cml-u/dsdt.asl +++ b/src/mainboard/clevo/cml-u/dsdt.asl @@ -18,6 +18,7 @@ DefinitionBlock( { #include #include + #include } #include diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb b/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb index 3329f638be..d9a642aab5 100644 --- a/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb +++ b/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb @@ -65,7 +65,17 @@ chip soc/intel/cannonlake device domain 0 on subsystemid 0x1558 0x1401 inherit device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device + device pci 02.0 on # Integrated Graphics Device + register "gfx" = "GMA_DEFAULT_PANEL(0)" + register "panel_cfg" = "{ + .up_delay_ms = 200, + .down_delay_ms = 50, + .cycle_delay_ms = 500, + .backlight_pwm_hz = 1000, + .backlight_on_delay_ms = 1, + .backlight_off_delay_ms = 1, + }" + end device pci 04.0 on # SA Thermal device register "Device4Enable" = "1" end -- cgit v1.2.3