From 62902ca45de871aa59657dd8ec1858c301595634 Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Tue, 29 Nov 2016 14:13:43 +0100 Subject: sb/ich7: Use common/gpio.h to set up GPIOs This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber Reviewed-by: Patrick Rudolph Reviewed-by: Paul Menzel --- src/mainboard/apple/macbook21/Makefile.inc | 1 + src/mainboard/apple/macbook21/gpio.c | 122 ++++++++++++++++++++ src/mainboard/apple/macbook21/romstage.c | 52 --------- src/mainboard/getac/p470/Makefile.inc | 1 + src/mainboard/getac/p470/gpio.c | 115 +++++++++++++++++++ src/mainboard/getac/p470/romstage.c | 28 +---- src/mainboard/gigabyte/ga-945gcm-s2l/Makefile.inc | 1 + src/mainboard/gigabyte/ga-945gcm-s2l/gpio.c | 118 +++++++++++++++++++ src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c | 17 --- src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc | 1 + src/mainboard/gigabyte/ga-g41m-es2l/gpio.c | 117 +++++++++++++++++++ src/mainboard/gigabyte/ga-g41m-es2l/romstage.c | 10 +- src/mainboard/ibase/mb899/Makefile.inc | 1 + src/mainboard/ibase/mb899/gpio.c | 116 +++++++++++++++++++ src/mainboard/ibase/mb899/romstage.c | 16 --- src/mainboard/intel/d510mo/Makefile.inc | 1 + src/mainboard/intel/d510mo/gpio.c | 125 ++++++++++++++++++++ src/mainboard/intel/d510mo/romstage.c | 10 +- src/mainboard/intel/d945gclf/Makefile.inc | 1 + src/mainboard/intel/d945gclf/gpio.c | 122 ++++++++++++++++++++ src/mainboard/intel/d945gclf/romstage.c | 17 --- src/mainboard/kontron/986lcd-m/Makefile.inc | 1 + src/mainboard/kontron/986lcd-m/gpio.c | 132 ++++++++++++++++++++++ src/mainboard/kontron/986lcd-m/romstage.c | 16 --- src/mainboard/lenovo/t60/Makefile.inc | 1 + src/mainboard/lenovo/t60/gpio.c | 112 ++++++++++++++++++ src/mainboard/lenovo/t60/romstage.c | 36 +----- src/mainboard/lenovo/x60/Makefile.inc | 1 + src/mainboard/lenovo/x60/gpio.c | 111 ++++++++++++++++++ src/mainboard/lenovo/x60/romstage.c | 43 +------ src/mainboard/roda/rk886ex/Makefile.inc | 1 + src/mainboard/roda/rk886ex/gpio.c | 117 +++++++++++++++++++ src/mainboard/roda/rk886ex/romstage.c | 30 ----- 33 files changed, 1329 insertions(+), 264 deletions(-) create mode 100644 src/mainboard/apple/macbook21/Makefile.inc create mode 100644 src/mainboard/apple/macbook21/gpio.c create mode 100644 src/mainboard/getac/p470/gpio.c create mode 100644 src/mainboard/gigabyte/ga-945gcm-s2l/gpio.c create mode 100644 src/mainboard/gigabyte/ga-g41m-es2l/gpio.c create mode 100644 src/mainboard/ibase/mb899/gpio.c create mode 100644 src/mainboard/intel/d510mo/gpio.c create mode 100644 src/mainboard/intel/d945gclf/gpio.c create mode 100644 src/mainboard/kontron/986lcd-m/gpio.c create mode 100644 src/mainboard/lenovo/t60/gpio.c create mode 100644 src/mainboard/lenovo/x60/gpio.c create mode 100644 src/mainboard/roda/rk886ex/gpio.c (limited to 'src/mainboard') diff --git a/src/mainboard/apple/macbook21/Makefile.inc b/src/mainboard/apple/macbook21/Makefile.inc new file mode 100644 index 0000000000..60484097e9 --- /dev/null +++ b/src/mainboard/apple/macbook21/Makefile.inc @@ -0,0 +1 @@ +romstage-y += gpio.c \ No newline at end of file diff --git a/src/mainboard/apple/macbook21/gpio.c b/src/mainboard/apple/macbook21/gpio.c new file mode 100644 index 0000000000..53c5c96ebc --- /dev/null +++ b/src/mainboard/apple/macbook21/gpio.c @@ -0,0 +1,122 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Arthur Heymans + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio1 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, + .gpio10 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_GPIO, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio1 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_OUTPUT, + .gpio6 = GPIO_DIR_OUTPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_OUTPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_INPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { +#if (CONFIG_BOARD_APPLE_MACBOOK11 || CONFIG_BOARD_APPLE_MACBOOK21) + .gpio5 = GPIO_LEVEL_LOW, +#else /* CONFIG_BOARD_APPLE_IMAC52 */ + .gpio5 = GPIO_LEVEL_HIGH, +#endif + .gpio6 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_LOW, + .gpio14 = GPIO_LEVEL_HIGH, + .gpio22 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, +#if (CONFIG_BOARD_APPLE_MACBOOK11 || CONFIG_BOARD_APPLE_MACBOOK21) + .gpio13 = GPIO_INVERT, +#endif +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { +#if CONFIG_BOARD_APPLE_IMAC52 + .gpio35 = GPIO_MODE_GPIO, +#endif + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { +#if CONFIG_BOARD_APPLE_IMAC52 + .gpio35 = GPIO_DIR_OUTPUT, +#endif + .gpio38 = GPIO_DIR_OUTPUT, + .gpio39 = GPIO_DIR_OUTPUT, + .gpio48 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { +#if CONFIG_BOARD_APPLE_IMAC52 + .gpio35 = GPIO_LEVEL_LOW, +#endif + .gpio38 = GPIO_LEVEL_HIGH, + .gpio39 = GPIO_LEVEL_HIGH, + .gpio48 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, +}; diff --git a/src/mainboard/apple/macbook21/romstage.c b/src/mainboard/apple/macbook21/romstage.c index 391b09f6b7..962ad41577 100644 --- a/src/mainboard/apple/macbook21/romstage.c +++ b/src/mainboard/apple/macbook21/romstage.c @@ -35,58 +35,6 @@ #include #include -void setup_ich7_gpios(void) -{ - printk(BIOS_DEBUG, " GPIOS..."); - - /* X60 GPIO: - * 1: HDD_PRESENCE# - * 6: Unknown (Pulled high by R215 to VCC3B) - * 7: BDC_PRESENCE# - * 8: H8_WAKE# - * 9: RTC_BAT_IN# - * 10: Unknown (Pulled high by R700 to VCC3M) - * 12: H8SCI# - * 13: SLICE_ON_3M# - * 14: Unknown (Pulled high by R321 to VCC3) - * 15: Unknown (Pulled high by R258 to VCC3) - * 19: Unknown (Pulled low by R594) - * 21: Unknown (Pulled high by R145 to VCC3) - * 22: FWH_WP# - * 25: MDC_KILL# - * 33: HDD_PRESENCE_2# - * 35: CLKREQ_SATA# - * 36: PLANARID0 - * 37: PLANARID1 - * 38: PLANARID2 - * 39: PLANARID3 - * 48: FWH_TBL# - */ -#if (CONFIG_BOARD_APPLE_MACBOOK11 || CONFIG_BOARD_APPLE_MACBOOK21) - outl(0x1f40f7e2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xfea8af83, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xfcc06bdf, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x00002082, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100c0, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x000100c0, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */ -#else /* CONFIG_BOARD_APPLE_IMAC52 */ - outl(0x1f40f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xfea8af83, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xfcc06bff, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x00000082, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100c8, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x000100c0, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */ -#endif -} - static void ich7_enable_lpc(void) { /* Enable Serial IRQ */ diff --git a/src/mainboard/getac/p470/Makefile.inc b/src/mainboard/getac/p470/Makefile.inc index 07d9918bd0..ed9d39cec6 100644 --- a/src/mainboard/getac/p470/Makefile.inc +++ b/src/mainboard/getac/p470/Makefile.inc @@ -14,3 +14,4 @@ ## ramstage-y += cstates.c +romstage-y += gpio.c diff --git a/src/mainboard/getac/p470/gpio.c b/src/mainboard/getac/p470/gpio.c new file mode 100644 index 0000000000..be52a86ce1 --- /dev/null +++ b/src/mainboard/getac/p470/gpio.c @@ -0,0 +1,115 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Arthur Heymans + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio1 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, + .gpio10 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio19 = GPIO_MODE_GPIO, + .gpio21 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_GPIO, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio1 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_OUTPUT, + .gpio10 = GPIO_DIR_OUTPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_OUTPUT, + .gpio14 = GPIO_DIR_OUTPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio9 = GPIO_LEVEL_HIGH, + .gpio10 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio13 = GPIO_LEVEL_HIGH, + .gpio14 = GPIO_LEVEL_LOW, + .gpio15 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_HIGH, + .gpio27 = GPIO_LEVEL_HIGH, + .gpio28 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio7 = GPIO_INVERT, + .gpio8 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio37 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio33 = GPIO_LEVEL_LOW, + .gpio34 = GPIO_LEVEL_HIGH, + .gpio37 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, +}; diff --git a/src/mainboard/getac/p470/romstage.c b/src/mainboard/getac/p470/romstage.c index 20130f27d2..d1552a6599 100644 --- a/src/mainboard/getac/p470/romstage.c +++ b/src/mainboard/getac/p470/romstage.c @@ -34,34 +34,10 @@ #include #include "option_table.h" -void setup_ich7_gpios(void) +static void setup_special_ich7_gpios(void) { u32 gpios; - printk(BIOS_DEBUG, " GPIOS..."); - /* General Registers */ - outl(0x1f28f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xe0e809c3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - // Power On value is eede1fbf, we set: (TODO explain why) - // -- [21] = 1 - // -- [20] = 0 - // -- [18] = 0 - // -- [17] = 0 - // -- [13] = 1 - // -- [05] = 0 - // -- [04] = 0 - // -- [03] = 0 - // -- [02] = 0 - // We should probably do this explicitly bitwise, see below. - outl(0xeee83f83, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x00000180, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000000e6, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x000000d0, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x00000034, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */ - printk(BIOS_SPEW, "\n Initializing drive bay...\n"); gpios = inl(DEFAULT_GPIOBASE + 0x38); // GPIO Level 2 gpios |= (1 << 0); // GPIO33 = ODD @@ -297,6 +273,8 @@ void mainboard_romstage_entry(unsigned long bist) */ i945_early_initialization(); + setup_special_ich7_gpios(); + s3resume = southbridge_detect_s3_resume(); /* Enable SPD ROMs and DDR-II DRAM */ diff --git a/src/mainboard/gigabyte/ga-945gcm-s2l/Makefile.inc b/src/mainboard/gigabyte/ga-945gcm-s2l/Makefile.inc index f9621db6b3..f3d7e76263 100644 --- a/src/mainboard/gigabyte/ga-945gcm-s2l/Makefile.inc +++ b/src/mainboard/gigabyte/ga-945gcm-s2l/Makefile.inc @@ -1 +1,2 @@ ramstage-y += cstates.c +romstage-y += gpio.c diff --git a/src/mainboard/gigabyte/ga-945gcm-s2l/gpio.c b/src/mainboard/gigabyte/ga-945gcm-s2l/gpio.c new file mode 100644 index 0000000000..38e01003df --- /dev/null +++ b/src/mainboard/gigabyte/ga-945gcm-s2l/gpio.c @@ -0,0 +1,118 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Arthur Heymans + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, + .gpio10 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_GPIO, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_INPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_OUTPUT, + .gpio18 = GPIO_DIR_OUTPUT, + .gpio20 = GPIO_DIR_OUTPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio16 = GPIO_LEVEL_LOW, + .gpio18 = GPIO_LEVEL_HIGH, + .gpio20 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio0 = GPIO_INVERT, + .gpio6 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio8 = GPIO_INVERT, + .gpio12 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_LOW, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio34 = GPIO_LEVEL_LOW, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, +}; diff --git a/src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c b/src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c index 62729a742c..9789d2acf6 100644 --- a/src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c +++ b/src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c @@ -41,23 +41,6 @@ #define EC_DEV PNP_DEV(0x2e, IT8718F_EC) #define SUPERIO_DEV PNP_DEV(0x2e, 0) -void setup_ich7_gpios(void) -{ - /* TODO: This is highly board specific and should be moved */ - printk(BIOS_DEBUG, " GPIOS..."); - /* General Registers */ - outl(0x1f15f7c1, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xe0e8ffc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xe2fefc03, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00400000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x000039ff, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000000c7, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x000000f0, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x000000f2, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */ -} - static void setup_sio(void) { /* Set default GPIOs on superio */ diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc b/src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc index f9621db6b3..f3d7e76263 100644 --- a/src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc +++ b/src/mainboard/gigabyte/ga-g41m-es2l/Makefile.inc @@ -1 +1,2 @@ ramstage-y += cstates.c +romstage-y += gpio.c diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/gpio.c b/src/mainboard/gigabyte/ga-g41m-es2l/gpio.c new file mode 100644 index 0000000000..e06a8f1ec9 --- /dev/null +++ b/src/mainboard/gigabyte/ga-g41m-es2l/gpio.c @@ -0,0 +1,117 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Arthur Heymans + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, + .gpio10 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_GPIO, + .gpio21 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_GPIO, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_INPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio18 = GPIO_DIR_OUTPUT, + .gpio20 = GPIO_DIR_OUTPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_INPUT, + .gpio26 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio18 = GPIO_LEVEL_HIGH, + .gpio20 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio26 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio6 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio8 = GPIO_INVERT, + .gpio12 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio34 = GPIO_LEVEL_LOW, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, +}; diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/romstage.c b/src/mainboard/gigabyte/ga-g41m-es2l/romstage.c index 2503db9433..0f437951e5 100644 --- a/src/mainboard/gigabyte/ga-g41m-es2l/romstage.c +++ b/src/mainboard/gigabyte/ga-g41m-es2l/romstage.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -50,14 +51,7 @@ static void mb_gpio_init(void) pci_write_config32(dev, GPIO_BASE, (DEFAULT_GPIOBASE | 1)); pci_write_config8(dev, GPIO_CNTL, 0x10); - outl(0x1f35f7c0, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xe2e9ffc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xe0d7ec02, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - outl(0x000039ff, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000000e7, DEFAULT_GPIOBASE + 0x30); - outl(0x000000f0, DEFAULT_GPIOBASE + 0x34); - outl(0x00000083, DEFAULT_GPIOBASE + 0x38); + setup_pch_gpios(&mainboard_gpio_map); /* Set default GPIOs on superio */ ite_reg_write(GPIO_DEV, 0x25, 0x00); diff --git a/src/mainboard/ibase/mb899/Makefile.inc b/src/mainboard/ibase/mb899/Makefile.inc index 0b70b894c4..8db0ada46d 100644 --- a/src/mainboard/ibase/mb899/Makefile.inc +++ b/src/mainboard/ibase/mb899/Makefile.inc @@ -1,2 +1,3 @@ ramstage-y += superio_hwm.c ramstage-y += cstates.c +romstage-y += gpio.c \ No newline at end of file diff --git a/src/mainboard/ibase/mb899/gpio.c b/src/mainboard/ibase/mb899/gpio.c new file mode 100644 index 0000000000..110219e76c --- /dev/null +++ b/src/mainboard/ibase/mb899/gpio.c @@ -0,0 +1,116 @@ +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, + .gpio10 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_GPIO, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_GPIO, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_OUTPUT, + .gpio17 = GPIO_DIR_OUTPUT, + .gpio18 = GPIO_DIR_OUTPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_OUTPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio12 = GPIO_LEVEL_LOW, + .gpio16 = GPIO_LEVEL_HIGH, + .gpio17 = GPIO_LEVEL_HIGH, + .gpio18 = GPIO_LEVEL_HIGH, + .gpio20 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_HIGH, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_HIGH, + .gpio28 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio7 = GPIO_INVERT, + .gpio8 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_OUTPUT, + .gpio39 = GPIO_DIR_OUTPUT, + .gpio48 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_LOW, + .gpio34 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, + .gpio38 = GPIO_LEVEL_LOW, + .gpio39 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, +}; diff --git a/src/mainboard/ibase/mb899/romstage.c b/src/mainboard/ibase/mb899/romstage.c index dedbd55358..7088f1deea 100644 --- a/src/mainboard/ibase/mb899/romstage.c +++ b/src/mainboard/ibase/mb899/romstage.c @@ -39,22 +39,6 @@ #define SERIAL_DEV PNP_DEV(0x4e, W83627EHG_SP1) #define DUMMY_DEV PNP_DEV(0x4e, 0) -void setup_ich7_gpios(void) -{ - printk(BIOS_DEBUG, " GPIOS..."); - /* General Registers */ - outl(0x1f1ff7c0, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xe0e8efc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xebffeeff, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x00002180, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100ff, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x00010035, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ -} - static void ich7_enable_lpc(void) { // Enable Serial IRQ diff --git a/src/mainboard/intel/d510mo/Makefile.inc b/src/mainboard/intel/d510mo/Makefile.inc index f9621db6b3..f3d7e76263 100644 --- a/src/mainboard/intel/d510mo/Makefile.inc +++ b/src/mainboard/intel/d510mo/Makefile.inc @@ -1 +1,2 @@ ramstage-y += cstates.c +romstage-y += gpio.c diff --git a/src/mainboard/intel/d510mo/gpio.c b/src/mainboard/intel/d510mo/gpio.c new file mode 100644 index 0000000000..81e23bade0 --- /dev/null +++ b/src/mainboard/intel/d510mo/gpio.c @@ -0,0 +1,125 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Arthur Heymans + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, + .gpio10 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_GPIO, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_GPIO, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_OUTPUT, + .gpio7 = GPIO_DIR_OUTPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio9 = GPIO_DIR_OUTPUT, + .gpio10 = GPIO_DIR_OUTPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_OUTPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio6 = GPIO_LEVEL_HIGH, + .gpio7 = GPIO_LEVEL_LOW, + .gpio8 = GPIO_LEVEL_LOW, + .gpio9 = GPIO_LEVEL_LOW, + .gpio10 = GPIO_LEVEL_LOW, + .gpio12 = GPIO_LEVEL_LOW, + .gpio20 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, + .gpio25 = GPIO_LEVEL_LOW, + .gpio26 = GPIO_LEVEL_HIGH, + .gpio27 = GPIO_LEVEL_HIGH, + .gpio28 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_INPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_INPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio39 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, +}; diff --git a/src/mainboard/intel/d510mo/romstage.c b/src/mainboard/intel/d510mo/romstage.c index f73bf649a9..3209d81ed1 100644 --- a/src/mainboard/intel/d510mo/romstage.c +++ b/src/mainboard/intel/d510mo/romstage.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -47,14 +48,7 @@ static void mb_gpio_init(void) pci_write_config32(dev, GPIO_BASE, (DEFAULT_GPIOBASE | 1)); pci_write_config8(dev, GPIO_CNTL, 0x10); - outl(0x1ff9f7c1, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xe0e9e803, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xece9e842, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - outl(0x00002000, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000000fe, DEFAULT_GPIOBASE + 0x30); - outl(0x0000007e, DEFAULT_GPIOBASE + 0x34); - outl(0x000300f3, DEFAULT_GPIOBASE + 0x38); + setup_pch_gpios(&mainboard_gpio_map); } static void nm10_enable_lpc(void) diff --git a/src/mainboard/intel/d945gclf/Makefile.inc b/src/mainboard/intel/d945gclf/Makefile.inc index f9621db6b3..f3d7e76263 100644 --- a/src/mainboard/intel/d945gclf/Makefile.inc +++ b/src/mainboard/intel/d945gclf/Makefile.inc @@ -1 +1,2 @@ ramstage-y += cstates.c +romstage-y += gpio.c diff --git a/src/mainboard/intel/d945gclf/gpio.c b/src/mainboard/intel/d945gclf/gpio.c new file mode 100644 index 0000000000..f5787f9d76 --- /dev/null +++ b/src/mainboard/intel/d945gclf/gpio.c @@ -0,0 +1,122 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Arthur Heymans + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, + .gpio10 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_GPIO, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_GPIO, + .gpio21 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_GPIO, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_INPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_OUTPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_OUTPUT, + .gpio18 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_INPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio14 = GPIO_LEVEL_HIGH, + .gpio16 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_HIGH, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio13 = GPIO_INVERT, + .gpio15 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_INPUT, + .gpio33 = GPIO_DIR_INPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_INPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_OUTPUT, + .gpio39 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio38 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, +}; diff --git a/src/mainboard/intel/d945gclf/romstage.c b/src/mainboard/intel/d945gclf/romstage.c index 414b7056ed..e769fc522b 100644 --- a/src/mainboard/intel/d945gclf/romstage.c +++ b/src/mainboard/intel/d945gclf/romstage.c @@ -37,23 +37,6 @@ #define SERIAL_DEV PNP_DEV(0x2e, LPC47M15X_SP1) #define PME_DEV PNP_DEV(0x2e, LPC47M15X_PME) -void setup_ich7_gpios(void) -{ - /* TODO: This is highly board specific and should be moved */ - printk(BIOS_DEBUG, " GPIOS..."); - /* General Registers */ - outl(0x3f3df7c1, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xc6fcbfc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xecfefdff, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00040000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x0000a000, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000000ff, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x000000bf, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x000300fd, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ -} - static void ich7_enable_lpc(void) { // Enable Serial IRQ diff --git a/src/mainboard/kontron/986lcd-m/Makefile.inc b/src/mainboard/kontron/986lcd-m/Makefile.inc index f9621db6b3..f3d7e76263 100644 --- a/src/mainboard/kontron/986lcd-m/Makefile.inc +++ b/src/mainboard/kontron/986lcd-m/Makefile.inc @@ -1 +1,2 @@ ramstage-y += cstates.c +romstage-y += gpio.c diff --git a/src/mainboard/kontron/986lcd-m/gpio.c b/src/mainboard/kontron/986lcd-m/gpio.c new file mode 100644 index 0000000000..c879a9ca34 --- /dev/null +++ b/src/mainboard/kontron/986lcd-m/gpio.c @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Arthur Heymans + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, + .gpio10 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_GPIO, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_GPIO, + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_OUTPUT, + .gpio17 = GPIO_DIR_OUTPUT, + .gpio18 = GPIO_DIR_OUTPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_OUTPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio12 = GPIO_LEVEL_LOW, + .gpio16 = GPIO_LEVEL_HIGH, + .gpio17 = GPIO_LEVEL_HIGH, + .gpio18 = GPIO_LEVEL_HIGH, + .gpio20 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_HIGH, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_HIGH, + .gpio28 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio7 = GPIO_INVERT, + .gpio8 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_GPIO, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_OUTPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_OUTPUT, + .gpio39 = GPIO_DIR_OUTPUT, + .gpio48 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_LOW, + .gpio34 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_HIGH, + .gpio38 = GPIO_LEVEL_LOW, + .gpio39 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, +}; diff --git a/src/mainboard/kontron/986lcd-m/romstage.c b/src/mainboard/kontron/986lcd-m/romstage.c index e5fdc7318f..3b3ff661fd 100644 --- a/src/mainboard/kontron/986lcd-m/romstage.c +++ b/src/mainboard/kontron/986lcd-m/romstage.c @@ -38,22 +38,6 @@ #define SERIAL_DEV PNP_DEV(0x2e, W83627THG_SP1) -void setup_ich7_gpios(void) -{ - printk(BIOS_DEBUG, " GPIOS..."); - /* General Registers */ - outl(0x1f1ff7c0, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xe0e8efc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xebffeeff, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x00002180, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100ff, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x00010035, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ -} - static void ich7_enable_lpc(void) { int lpt_en = 0; diff --git a/src/mainboard/lenovo/t60/Makefile.inc b/src/mainboard/lenovo/t60/Makefile.inc index 065c42319a..8473a13505 100644 --- a/src/mainboard/lenovo/t60/Makefile.inc +++ b/src/mainboard/lenovo/t60/Makefile.inc @@ -15,3 +15,4 @@ smm-$(CONFIG_HAVE_SMI_HANDLER) += dock.c romstage-y += dock.c +romstage-y += gpio.c diff --git a/src/mainboard/lenovo/t60/gpio.c b/src/mainboard/lenovo/t60/gpio.c new file mode 100644 index 0000000000..f220b2be0c --- /dev/null +++ b/src/mainboard/lenovo/t60/gpio.c @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Arthur Heymans + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio1 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, /* LEGACYIO# */ + .gpio7 = GPIO_MODE_GPIO, /* BDC_PRESENCE# */ + .gpio8 = GPIO_MODE_GPIO, /* H8_WAKE# */ + .gpio9 = GPIO_MODE_GPIO, + .gpio10 = GPIO_MODE_GPIO, /* MDI_DETECT */ + .gpio12 = GPIO_MODE_GPIO, /* H8SCI# */ + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, /* CPUSB# */ + .gpio15 = GPIO_MODE_GPIO, /* CPPE# */ + .gpio19 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_GPIO, /* MDC_KILL# */ + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, /* EXC_PWR_CTRL */ + .gpio28 = GPIO_MODE_GPIO, /* EXC_AUX_CTRL */ +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio1 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_INPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_OUTPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio19 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_HIGH, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_HIGH, + .gpio28 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio6 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio8 = GPIO_INVERT, + .gpio12 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio36 = GPIO_MODE_GPIO, /*PLANARID0 */ + .gpio37 = GPIO_MODE_GPIO, /*PLANARID1 */ + .gpio38 = GPIO_MODE_GPIO, /*PLANARID2 */ + .gpio39 = GPIO_MODE_GPIO, /*PLANARID3 */ + .gpio48 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio48 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, +}; diff --git a/src/mainboard/lenovo/t60/romstage.c b/src/mainboard/lenovo/t60/romstage.c index d3cd90cf65..2686635d13 100644 --- a/src/mainboard/lenovo/t60/romstage.c +++ b/src/mainboard/lenovo/t60/romstage.c @@ -35,41 +35,9 @@ #include #include #include +#include #include "dock.h" -void setup_ich7_gpios(void) -{ - printk(BIOS_DEBUG, " GPIOS..."); - - /* T60 GPIO: - 6: LEGACYIO# - 7: BDC_PRESENCE# - 8: H8_WAKE# - 10: MDI_DETECT - 12: H8SCI# - 14: CPUSB# - 15: CPPE# - 25: MDC_KILL# - 27: EXC_PWR_CTRL - 28: EXC_AUX_CTRL - 35: CLKREQ_SATA# - 36: PLANARID0 - 37: PLANARID1 - 38: PLANARID2 - 39: PLANARID3 - */ - outl(0x1f48f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xe0e0ffc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xfbfefb7d, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00040000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x000039ff, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100f0, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x000000f1, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x000300a3, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */ -} - static void ich7_enable_lpc(void) { // Enable Serial IRQ @@ -224,7 +192,7 @@ void mainboard_romstage_entry(unsigned long bist) pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1); /* Enable GPIOs */ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c /* GC */ , 0x10); - setup_ich7_gpios(); + setup_pch_gpios(&mainboard_gpio_map); dock_err = dlpc_init(); diff --git a/src/mainboard/lenovo/x60/Makefile.inc b/src/mainboard/lenovo/x60/Makefile.inc index 012ae7f326..bea9c2e730 100644 --- a/src/mainboard/lenovo/x60/Makefile.inc +++ b/src/mainboard/lenovo/x60/Makefile.inc @@ -16,3 +16,4 @@ smm-$(CONFIG_HAVE_SMI_HANDLER) += dock.c romstage-y += dock.c ramstage-y += dock.c +romstage-y += gpio.c \ No newline at end of file diff --git a/src/mainboard/lenovo/x60/gpio.c b/src/mainboard/lenovo/x60/gpio.c new file mode 100644 index 0000000000..0498443513 --- /dev/null +++ b/src/mainboard/lenovo/x60/gpio.c @@ -0,0 +1,111 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Arthur Heymans + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio1 = GPIO_MODE_GPIO, /* HDD_PRESENCE# */ + .gpio6 = GPIO_MODE_GPIO, /* Unknown (Pulled high by R215 to VCC3B) */ + .gpio7 = GPIO_MODE_GPIO, /* BDC_PRESENCE# */ + .gpio8 = GPIO_MODE_GPIO, /* H8_WAKE# */ + .gpio9 = GPIO_MODE_GPIO, /* RTC_BAT_IN# */ + .gpio10 = GPIO_MODE_GPIO, /* Unknown (Pulled high by R700 to VCC3M) */ + .gpio12 = GPIO_MODE_GPIO, /* H8SCI# */ + .gpio13 = GPIO_MODE_GPIO, /* SLICE_ON_3M# */ + .gpio14 = GPIO_MODE_GPIO, /* Unknown (Pulled high by R321 to VCC3) */ + .gpio15 = GPIO_MODE_GPIO, /* Unknown (Pulled high by R258 to VCC3) */ + .gpio22 = GPIO_MODE_GPIO, /* FWH_WP# */ + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_GPIO, /* MDC_KILL# */ + .gpio26 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio1 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_INPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio24 = GPIO_LEVEL_HIGH, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_HIGH, + .gpio28 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio6 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio8 = GPIO_INVERT, + .gpio12 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio33 = GPIO_MODE_GPIO, /* HDD_PRESENCE_2# */ + .gpio36 = GPIO_MODE_GPIO, /* PLANARID0 */ + .gpio37 = GPIO_MODE_GPIO, /* PLANARID1 */ + .gpio38 = GPIO_MODE_GPIO, /* PLANARID2 */ + .gpio39 = GPIO_MODE_GPIO, /* PLANARID3 */ + .gpio48 = GPIO_MODE_GPIO, /* FWH_TBL# */ +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio33 = GPIO_LEVEL_HIGH, + .gpio48 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, +}; diff --git a/src/mainboard/lenovo/x60/romstage.c b/src/mainboard/lenovo/x60/romstage.c index 53a0151fb9..51624a009e 100644 --- a/src/mainboard/lenovo/x60/romstage.c +++ b/src/mainboard/lenovo/x60/romstage.c @@ -35,48 +35,9 @@ #include #include #include +#include #include "dock.h" -void setup_ich7_gpios(void) -{ - printk(BIOS_DEBUG, " GPIOS..."); - - /* X60 GPIO: - * 1: HDD_PRESENCE# - * 6: Unknown (Pulled high by R215 to VCC3B) - * 7: BDC_PRESENCE# - * 8: H8_WAKE# - * 9: RTC_BAT_IN# - * 10: Unknown (Pulled high by R700 to VCC3M) - * 12: H8SCI# - * 13: SLICE_ON_3M# - * 14: Unknown (Pulled high by R321 to VCC3) - * 15: Unknown (Pulled high by R258 to VCC3) - * 19: Unknown (Pulled low by R594) - * 21: Unknown (Pulled high by R145 to VCC3) - * 22: FWH_WP# - * 25: MDC_KILL# - * 33: HDD_PRESENCE_2# - * 35: CLKREQ_SATA# - * 36: PLANARID0 - * 37: PLANARID1 - * 38: PLANARID2 - * 39: PLANARID3 - * 48: FWH_TBL# - */ - - outl(0x1f40f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xe0e8ffc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xfbf6ddfd, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00040000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x000039ff, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100f2, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x000000f0, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x00030043, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ -} - static void ich7_enable_lpc(void) { // Enable Serial IRQ @@ -222,7 +183,7 @@ void mainboard_romstage_entry(unsigned long bist) /* Enable GPIOs */ pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1); pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c, 0x10); /* 0x4c == GC */ - setup_ich7_gpios(); + setup_pch_gpios(&mainboard_gpio_map); ich7_enable_lpc(); diff --git a/src/mainboard/roda/rk886ex/Makefile.inc b/src/mainboard/roda/rk886ex/Makefile.inc index 07db49d45f..2c68d384d1 100644 --- a/src/mainboard/roda/rk886ex/Makefile.inc +++ b/src/mainboard/roda/rk886ex/Makefile.inc @@ -15,3 +15,4 @@ ramstage-y += m3885.c ramstage-y += cstates.c +romstage-y += gpio.c diff --git a/src/mainboard/roda/rk886ex/gpio.c b/src/mainboard/roda/rk886ex/gpio.c new file mode 100644 index 0000000000..72868ca351 --- /dev/null +++ b/src/mainboard/roda/rk886ex/gpio.c @@ -0,0 +1,117 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Arthur Heymans + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio6 = GPIO_MODE_GPIO, /* Enable power of SATA channel 0 */ + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, /* Wireless LAN power on */ + .gpio10 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, /* FAN on */ + .gpio22 = GPIO_MODE_GPIO, /* FWH WP */ + .gpio23 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, /* GPS on */ + .gpio25 = GPIO_MODE_GPIO, /* External Antenna Mux on */ + .gpio26 = GPIO_MODE_GPIO, /* BT on */ + .gpio27 = GPIO_MODE_GPIO, /* GSM on */ + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio31 = GPIO_MODE_GPIO, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio6 = GPIO_DIR_OUTPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_OUTPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_INPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_OUTPUT, + .gpio26 = GPIO_DIR_OUTPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_INPUT, + .gpio29 = GPIO_DIR_INPUT, + .gpio31 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio6 = GPIO_LEVEL_LOW, + .gpio9 = GPIO_LEVEL_LOW, + .gpio15 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_HIGH, + .gpio25 = GPIO_LEVEL_LOW, + .gpio26 = GPIO_LEVEL_LOW, + .gpio27 = GPIO_LEVEL_LOW, + .gpio31 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio7 = GPIO_INVERT, + .gpio8 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio35 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, /* FWH TLB# */ +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio35 = GPIO_DIR_OUTPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_OUTPUT, + .gpio39 = GPIO_DIR_OUTPUT, + .gpio48 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio35 = GPIO_LEVEL_LOW, + .gpio38 = GPIO_LEVEL_LOW, + .gpio39 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, +}; diff --git a/src/mainboard/roda/rk886ex/romstage.c b/src/mainboard/roda/rk886ex/romstage.c index eef3ff9532..a488488b1a 100644 --- a/src/mainboard/roda/rk886ex/romstage.c +++ b/src/mainboard/roda/rk886ex/romstage.c @@ -36,36 +36,6 @@ #include #include "option_table.h" -void setup_ich7_gpios(void) -{ - printk(BIOS_DEBUG, " GPIOS..."); - /* General Registers */ - outl(0xbfc0f7c0, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0x70a87d83, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - /* ------------------------------------------------------------ - * 0 - GPO6 - Enable power of SATA channel 0 - * 0 - GPO9 - Wireless LAN power on - * 0 - GPO15 - FAN on - * 1 - GPO22 - FWH WP - * 1 - GPO24 - GPS on - * 0 - GPO25 - External Antenna Mux on - * 0 - GPO26 - BT on - * 0 - GPO27 - GSM on - */ - outl(0x01400000, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* ------------------------------------------------------------ */ - /* Output Control Registers */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x00002180, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100e8, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - /* ------------------------------------------------------------ */ - /* 1 - GPO48 - FWH TBL# */ - outl(0x00010000, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ - /* ------------------------------------------------------------ */ -} - static void ich7_enable_lpc(void) { int lpt_en = 0; -- cgit v1.2.3