From 56352e1f8055c3495c71e1856f0d26923be44ed0 Mon Sep 17 00:00:00 2001 From: Mario Scheithauer Date: Thu, 11 Jul 2019 14:31:34 +0200 Subject: mb/siemens/mc_apl3: Enable LPSS UART 1 By setting the GPIOs 42 and 43 to native function 1 the LPSS UART 1 is activated. Change-Id: I74abd1b6fb5459cf11a5bdee182c99462f613b7a Signed-off-by: Mario Scheithauer Reviewed-on: https://review.coreboot.org/c/coreboot/+/34238 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh --- src/mainboard/siemens/mc_apl1/variants/mc_apl3/gpio.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'src/mainboard') diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl3/gpio.c b/src/mainboard/siemens/mc_apl1/variants/mc_apl3/gpio.c index 9159ba1b50..e0fec7c786 100644 --- a/src/mainboard/siemens/mc_apl1/variants/mc_apl3/gpio.c +++ b/src/mainboard/siemens/mc_apl1/variants/mc_apl3/gpio.c @@ -325,8 +325,9 @@ static const struct pad_config gpio_table[] = { PAD_CFG_GPI(GPIO_39, DN_20K, DEEP), /* LPSS_UART0_TXD - unused */ PAD_CFG_GPI(GPIO_40, DN_20K, DEEP), /* LPSS_UART0_RTS - unused */ PAD_CFG_GPI(GPIO_41, UP_20K, DEEP), /* LPSS_UART0_CTS - unused */ - PAD_CFG_GPI(GPIO_42, UP_20K, DEEP), /* LPSS_UART1_RXD - unused */ - PAD_CFG_GPI(GPIO_43, DN_20K, DEEP), /* LPSS_UART1_TXD - unused */ + PAD_CFG_NF(GPIO_42, UP_20K, DEEP, NF1), /* LPSS_UART1_RXD */ + /* LPSS_UART1_TXD */ + PAD_CFG_NF_IOSSTATE(GPIO_43, NATIVE, DEEP, NF1, Tx1RxDCRx0), PAD_CFG_GPI(GPIO_44, UP_20K, DEEP), /* LPSS_UART1_RTS - unused */ PAD_CFG_GPI(GPIO_45, UP_20K, DEEP), /* LPSS_UART1_CTS - unused */ PAD_CFG_NF(GPIO_46, UP_20K, DEEP, NF1), /* LPSS_UART2_RXD */ -- cgit v1.2.3