From 50f4c5ae33b0a4a7fc6e2737d4976eb664a90ef7 Mon Sep 17 00:00:00 2001 From: Maxim Polyakov Date: Wed, 21 Aug 2019 19:05:13 +0300 Subject: mb/asrock/h110m: disable unused sata ports Sets all unused sata ports to disable in the device tree Note: SATA4 and SATA5 are located at the bottom of the board, but there is no connector for this. Apparently, a board with an increased number of ports is very rare. Perhaps this is a separate variant of the Asrock motherboard. For this reason, these ports are also disabled Change-Id: I5b3ad372f1d6607cc7b4a78e3c59d2a5ae1d2cf5 Signed-off-by: Maxim Polyakov Reviewed-on: https://review.coreboot.org/c/coreboot/+/35071 Tested-by: build bot (Jenkins) Reviewed-by: Angel Pons --- src/mainboard/asrock/h110m/devicetree.cb | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'src/mainboard') diff --git a/src/mainboard/asrock/h110m/devicetree.cb b/src/mainboard/asrock/h110m/devicetree.cb index 47d534a99b..1240d39c1e 100644 --- a/src/mainboard/asrock/h110m/devicetree.cb +++ b/src/mainboard/asrock/h110m/devicetree.cb @@ -182,11 +182,13 @@ chip soc/intel/skylake [1] = 1, \ [2] = 1, \ [3] = 1, \ - [4] = 1, \ - [5] = 1, \ - [6] = 1, \ - [7] = 1, \ + [4] = 0, \ + [5] = 0, \ + [6] = 0, \ + [7] = 0, \ }" + # SATA4 and SATA5 are located in the lower right corner + # of the board, but there is no connector for this # PCH UART, SPI, I2C register "SerialIoDevMode" = "{ \ -- cgit v1.2.3