From 4ce67c02b215c570bb62305318a801c724e70c2f Mon Sep 17 00:00:00 2001
From: Vinod Polimera <quic_vpolimer@quicinc.com>
Date: Mon, 30 May 2022 18:03:41 +0530
Subject: mb/google/herobrine: Add support to enable display

This change adds support to enable edp gpios, display init for
herobrine.

BUG=b:182963902,b:216687885
TEST=Validated on qualcomm sc7280 development board.
Monitor name: LQ140M1JW49

Change-Id: I01dbe23afbb3d41d87f24cb7dcfa456cb7f133fb
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64885
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
---
 src/mainboard/google/herobrine/board.h     |  4 ++++
 src/mainboard/google/herobrine/mainboard.c | 37 ++++++++++++++++++++++++++++++
 2 files changed, 41 insertions(+)

(limited to 'src/mainboard')

diff --git a/src/mainboard/google/herobrine/board.h b/src/mainboard/google/herobrine/board.h
index 0e06cd9305..4c2aad6539 100644
--- a/src/mainboard/google/herobrine/board.h
+++ b/src/mainboard/google/herobrine/board.h
@@ -49,6 +49,10 @@
 #define GPIO_EN_FP_RAILS	dead_code_t(gpio_t)
 #endif
 
+/* Display specific gpios */
+#define GPIO_PANEL_POWER_ON	GPIO(80)
+#define GPIO_PANEL_HPD		GPIO(60)
+
 void setup_chromeos_gpios(void);
 
 #endif /* _COREBOOT_SRC_MAINBOARD_GOOGLE_HEROBRINE_BOARD_H_ */
diff --git a/src/mainboard/google/herobrine/mainboard.c b/src/mainboard/google/herobrine/mainboard.c
index 0901ff0cc3..ece6d6859a 100644
--- a/src/mainboard/google/herobrine/mainboard.c
+++ b/src/mainboard/google/herobrine/mainboard.c
@@ -1,10 +1,17 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
 #include "board.h"
+#include <boardid.h>
 #include <bootblock_common.h>
+#include <bootmode.h>
+#include <console/console.h>
+#include <delay.h>
 #include <device/device.h>
 #include <device/mmio.h>
+#include <edid.h>
 #include <soc/clock.h>
+#include <soc/display/mdssreg.h>
+#include <soc/display/edp_ctrl.h>
 #include <soc/qupv3_config_common.h>
 #include <soc/qup_se_handlers_common.h>
 #include <soc/qcom_qup_se.h>
@@ -46,6 +53,35 @@ static void qi2s_configure_gpios(void)
 		GPIO_NO_PULL, GPIO_16MA, GPIO_OUTPUT);
 }
 
+static void edp_configure_gpios(void)
+{
+	/* Panel power on GPIO enable */
+	gpio_output(GPIO_PANEL_POWER_ON, 1);
+
+	/* Panel HPD GPIO enable */
+	gpio_input_pulldown(GPIO_PANEL_HPD);
+}
+
+static void display_startup(void)
+{
+	struct edid ed;
+
+	if (!display_init_required()) {
+		printk(BIOS_INFO, "Skipping display init.\n");
+		return;
+	}
+
+	enable_mdss_clk();
+	edp_configure_gpios();
+	mdelay(250); /* Delay for the panel to be up */
+	if (edp_ctrl_init(&ed) == CB_SUCCESS) {
+		mdp_dsi_video_config(&ed);
+		mdp_dsi_video_on();
+		edid_set_framebuffer_bits_per_pixel(&ed, 32, 0);
+		fb_new_framebuffer_info_from_edid(&ed, (uintptr_t)0);
+	}
+}
+
 static void mainboard_init(struct device *dev)
 {
 	/* Configure clock for eMMC */
@@ -102,6 +138,7 @@ static void mainboard_init(struct device *dev)
 
 	setup_usb();
 	qi2s_configure_gpios();
+	display_startup();
 }
 
 static void mainboard_enable(struct device *dev)
-- 
cgit v1.2.3