From 44df56edcededb72d12289a6be8b7e2fb8fc1da0 Mon Sep 17 00:00:00 2001 From: Felix Singer Date: Wed, 23 Sep 2020 20:28:05 +0000 Subject: mb/clevo: Rename l140cu to cml-u MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In addition to CB:45664, rename clevo/l140cu to clevo/cml-u being able to add more variants under a generic mainboard later. Change-Id: I9c16e24830ebb80752df302aa2e63d9df8edad95 Signed-off-by: Felix Singer Reviewed-on: https://review.coreboot.org/c/coreboot/+/45665 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) --- src/mainboard/clevo/cml-u/Kconfig | 88 +++++++ src/mainboard/clevo/cml-u/Kconfig.name | 2 + src/mainboard/clevo/cml-u/Makefile.inc | 1 + src/mainboard/clevo/cml-u/acpi/gpe.asl | 11 + src/mainboard/clevo/cml-u/acpi/mainboard.asl | 14 ++ src/mainboard/clevo/cml-u/acpi/sleep.asl | 11 + src/mainboard/clevo/cml-u/board_info.txt | 6 + src/mainboard/clevo/cml-u/dsdt.asl | 31 +++ .../cml-u/spd/samsung-K4AAG165WA-BCTD.spd.hex | 33 +++ .../clevo/cml-u/variants/l140cu/Makefile.inc | 4 + .../clevo/cml-u/variants/l140cu/board_info.txt | 2 + .../clevo/cml-u/variants/l140cu/bootblock.c | 10 + src/mainboard/clevo/cml-u/variants/l140cu/data.vbt | Bin 0 -> 4608 bytes .../clevo/cml-u/variants/l140cu/devicetree.cb | 207 +++++++++++++++++ src/mainboard/clevo/cml-u/variants/l140cu/gpio.h | 256 +++++++++++++++++++++ .../clevo/cml-u/variants/l140cu/hda_verb.c | 35 +++ .../clevo/cml-u/variants/l140cu/ramstage.c | 11 + .../clevo/cml-u/variants/l140cu/romstage.c | 84 +++++++ src/mainboard/clevo/l140cu/Kconfig | 88 ------- src/mainboard/clevo/l140cu/Kconfig.name | 2 - src/mainboard/clevo/l140cu/Makefile.inc | 1 - src/mainboard/clevo/l140cu/acpi/gpe.asl | 11 - src/mainboard/clevo/l140cu/acpi/mainboard.asl | 14 -- src/mainboard/clevo/l140cu/acpi/sleep.asl | 11 - src/mainboard/clevo/l140cu/board_info.txt | 6 - src/mainboard/clevo/l140cu/dsdt.asl | 31 --- .../l140cu/spd/samsung-K4AAG165WA-BCTD.spd.hex | 33 --- .../clevo/l140cu/variants/l140cu/Makefile.inc | 4 - .../clevo/l140cu/variants/l140cu/board_info.txt | 2 - .../clevo/l140cu/variants/l140cu/bootblock.c | 10 - .../clevo/l140cu/variants/l140cu/data.vbt | Bin 4608 -> 0 bytes .../clevo/l140cu/variants/l140cu/devicetree.cb | 207 ----------------- src/mainboard/clevo/l140cu/variants/l140cu/gpio.h | 256 --------------------- .../clevo/l140cu/variants/l140cu/hda_verb.c | 35 --- .../clevo/l140cu/variants/l140cu/ramstage.c | 11 - .../clevo/l140cu/variants/l140cu/romstage.c | 84 ------- 36 files changed, 806 insertions(+), 806 deletions(-) create mode 100644 src/mainboard/clevo/cml-u/Kconfig create mode 100644 src/mainboard/clevo/cml-u/Kconfig.name create mode 100644 src/mainboard/clevo/cml-u/Makefile.inc create mode 100644 src/mainboard/clevo/cml-u/acpi/gpe.asl create mode 100644 src/mainboard/clevo/cml-u/acpi/mainboard.asl create mode 100644 src/mainboard/clevo/cml-u/acpi/sleep.asl create mode 100644 src/mainboard/clevo/cml-u/board_info.txt create mode 100644 src/mainboard/clevo/cml-u/dsdt.asl create mode 100644 src/mainboard/clevo/cml-u/spd/samsung-K4AAG165WA-BCTD.spd.hex create mode 100644 src/mainboard/clevo/cml-u/variants/l140cu/Makefile.inc create mode 100644 src/mainboard/clevo/cml-u/variants/l140cu/board_info.txt create mode 100644 src/mainboard/clevo/cml-u/variants/l140cu/bootblock.c create mode 100644 src/mainboard/clevo/cml-u/variants/l140cu/data.vbt create mode 100644 src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb create mode 100644 src/mainboard/clevo/cml-u/variants/l140cu/gpio.h create mode 100644 src/mainboard/clevo/cml-u/variants/l140cu/hda_verb.c create mode 100644 src/mainboard/clevo/cml-u/variants/l140cu/ramstage.c create mode 100644 src/mainboard/clevo/cml-u/variants/l140cu/romstage.c delete mode 100644 src/mainboard/clevo/l140cu/Kconfig delete mode 100644 src/mainboard/clevo/l140cu/Kconfig.name delete mode 100644 src/mainboard/clevo/l140cu/Makefile.inc delete mode 100644 src/mainboard/clevo/l140cu/acpi/gpe.asl delete mode 100644 src/mainboard/clevo/l140cu/acpi/mainboard.asl delete mode 100644 src/mainboard/clevo/l140cu/acpi/sleep.asl delete mode 100644 src/mainboard/clevo/l140cu/board_info.txt delete mode 100644 src/mainboard/clevo/l140cu/dsdt.asl delete mode 100644 src/mainboard/clevo/l140cu/spd/samsung-K4AAG165WA-BCTD.spd.hex delete mode 100644 src/mainboard/clevo/l140cu/variants/l140cu/Makefile.inc delete mode 100644 src/mainboard/clevo/l140cu/variants/l140cu/board_info.txt delete mode 100644 src/mainboard/clevo/l140cu/variants/l140cu/bootblock.c delete mode 100644 src/mainboard/clevo/l140cu/variants/l140cu/data.vbt delete mode 100644 src/mainboard/clevo/l140cu/variants/l140cu/devicetree.cb delete mode 100644 src/mainboard/clevo/l140cu/variants/l140cu/gpio.h delete mode 100644 src/mainboard/clevo/l140cu/variants/l140cu/hda_verb.c delete mode 100644 src/mainboard/clevo/l140cu/variants/l140cu/ramstage.c delete mode 100644 src/mainboard/clevo/l140cu/variants/l140cu/romstage.c (limited to 'src/mainboard') diff --git a/src/mainboard/clevo/cml-u/Kconfig b/src/mainboard/clevo/cml-u/Kconfig new file mode 100644 index 0000000000..bc75df9216 --- /dev/null +++ b/src/mainboard/clevo/cml-u/Kconfig @@ -0,0 +1,88 @@ +if BOARD_CLEVO_L140CU + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_16384 + select DRIVERS_I2C_HID + select EC_SYSTEM76_EC + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select HAVE_SMI_HANDLER + select HAVE_SPD_IN_CBFS + select INTEL_GMA_HAVE_VBT + select INTEL_LPSS_UART_FOR_CONSOLE + select MAINBOARD_HAS_LPC_TPM + select MAINBOARD_HAS_TPM2 + select NO_UART_ON_SUPERIO + select SOC_INTEL_COMETLAKE_1 + select SOC_INTEL_COMMON_BLOCK_HDA + select SOC_INTEL_COMMON_BLOCK_HDA_VERB + select SPD_READ_BY_WORD + select SYSTEM_TYPE_LAPTOP + select USE_LEGACY_8254_TIMER # Fix failure to boot GRUB + +config MAINBOARD_DIR + string + default "clevo/cml-u" + +config MAINBOARD_PART_NUMBER + string + default "L140CU" if BOARD_CLEVO_L140CU + +config MAINBOARD_SMBIOS_PRODUCT_NAME + string + default "L140CU" if BOARD_CLEVO_L140CU + +config MAINBOARD_VERSION + string + default "2.1A" if BOARD_CLEVO_L140CU + +config DEVICETREE + string + default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb" + +config CBFS_SIZE + hex + default 0xc00000 if BOARD_CLEVO_L140CU + +config CONSOLE_POST + bool + default y + +config UART_FOR_CONSOLE + int + default 2 + +config MAX_CPUS + int + default 8 if BOARD_CLEVO_L140CU + +config DIMM_MAX + int + default 2 if BOARD_CLEVO_L140CU + +config DIMM_SPD_SIZE + int + default 512 + +config VGA_BIOS_FILE + string + default "pci8086,9b41.rom" + +config VGA_BIOS_ID + string + default "8086,9b41" + +config TPM_PIRQ + hex + default 0x10 if BOARD_CLEVO_L140CU # GPP_A7/PIRQA# + +config POST_DEVICE + bool + default n + +config VARIANT_DIR + string + default "l140cu" if BOARD_CLEVO_L140CU + +endif diff --git a/src/mainboard/clevo/cml-u/Kconfig.name b/src/mainboard/clevo/cml-u/Kconfig.name new file mode 100644 index 0000000000..d5f867a475 --- /dev/null +++ b/src/mainboard/clevo/cml-u/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_CLEVO_L140CU + bool "L140CU" diff --git a/src/mainboard/clevo/cml-u/Makefile.inc b/src/mainboard/clevo/cml-u/Makefile.inc new file mode 100644 index 0000000000..6a388f27a1 --- /dev/null +++ b/src/mainboard/clevo/cml-u/Makefile.inc @@ -0,0 +1 @@ +subdirs-y += variants/$(VARIANT_DIR) diff --git a/src/mainboard/clevo/cml-u/acpi/gpe.asl b/src/mainboard/clevo/cml-u/acpi/gpe.asl new file mode 100644 index 0000000000..c1bc04dc9a --- /dev/null +++ b/src/mainboard/clevo/cml-u/acpi/gpe.asl @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +// GPP_D9 SCI +Method (_L29, 0, Serialized) { + Debug = Concatenate("GPE _L29: ", ToHexString(\_SB.PCI0.LPCB.EC0.WFNO)) + If (\_SB.PCI0.LPCB.EC0.ECOK) { + If (\_SB.PCI0.LPCB.EC0.WFNO == One) { + Notify(\_SB.LID0, 0x80) + } + } +} diff --git a/src/mainboard/clevo/cml-u/acpi/mainboard.asl b/src/mainboard/clevo/cml-u/acpi/mainboard.asl new file mode 100644 index 0000000000..dfa81d3914 --- /dev/null +++ b/src/mainboard/clevo/cml-u/acpi/mainboard.asl @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#define EC_GPE_SCI 0x50 /* GPP_E16 */ +#define EC_GPE_SWI 0x29 /* GPP_D9 */ +#define EC_COLOR_KEYBOARD 0 +#include + +Scope (\_SB) { + #include "sleep.asl" +} + +Scope (\_GPE) { + #include "gpe.asl" +} diff --git a/src/mainboard/clevo/cml-u/acpi/sleep.asl b/src/mainboard/clevo/cml-u/acpi/sleep.asl new file mode 100644 index 0000000000..48c50e075e --- /dev/null +++ b/src/mainboard/clevo/cml-u/acpi/sleep.asl @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* Method called from _PTS prior to enter sleep state */ +Method (MPTS, 1) { + \_SB.PCI0.LPCB.EC0.PTS (Arg0) +} + +/* Method called from _WAK prior to wakeup */ +Method (MWAK, 1) { + \_SB.PCI0.LPCB.EC0.WAK (Arg0) +} diff --git a/src/mainboard/clevo/cml-u/board_info.txt b/src/mainboard/clevo/cml-u/board_info.txt new file mode 100644 index 0000000000..67109938da --- /dev/null +++ b/src/mainboard/clevo/cml-u/board_info.txt @@ -0,0 +1,6 @@ +Vendor name: Clevo +Category: laptop +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/clevo/cml-u/dsdt.asl b/src/mainboard/clevo/cml-u/dsdt.asl new file mode 100644 index 0000000000..eac27b56f1 --- /dev/null +++ b/src/mainboard/clevo/cml-u/dsdt.asl @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 and up + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20110725 // OEM revision +) +{ + #include + #include + #include + + Device (\_SB.PCI0) + { + #include + #include + } + + #include + + Scope (\_SB.PCI0.LPCB) + { + #include + } + + #include "acpi/mainboard.asl" +} diff --git a/src/mainboard/clevo/cml-u/spd/samsung-K4AAG165WA-BCTD.spd.hex b/src/mainboard/clevo/cml-u/spd/samsung-K4AAG165WA-BCTD.spd.hex new file mode 100644 index 0000000000..f747f7c34e --- /dev/null +++ b/src/mainboard/clevo/cml-u/spd/samsung-K4AAG165WA-BCTD.spd.hex @@ -0,0 +1,33 @@ +# Samsung K4AAG165WA-BCTD +23 11 0C 03 46 29 00 08 00 60 00 03 02 03 00 00 +00 00 06 0D F8 3F 00 00 6E 6E 6E 11 00 6E F0 0A +20 08 00 05 00 F0 2B 34 28 00 78 00 14 3C 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 16 36 0B 35 +16 36 0B 35 00 00 16 36 0B 35 16 36 0B 35 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 9C B5 00 00 00 00 E7 00 F7 4B +0F 11 02 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 DB 08 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +80 CE 00 00 00 00 00 00 00 4B 34 41 41 47 31 36 +35 57 41 2D 42 43 54 44 20 20 20 20 20 00 80 CE +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/Makefile.inc b/src/mainboard/clevo/cml-u/variants/l140cu/Makefile.inc new file mode 100644 index 0000000000..3d742d6e13 --- /dev/null +++ b/src/mainboard/clevo/cml-u/variants/l140cu/Makefile.inc @@ -0,0 +1,4 @@ +bootblock-y += bootblock.c +ramstage-y += ramstage.c +ramstage-y += hda_verb.c +SPD_SOURCES = samsung-K4AAG165WA-BCTD diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/board_info.txt b/src/mainboard/clevo/cml-u/variants/l140cu/board_info.txt new file mode 100644 index 0000000000..86230320af --- /dev/null +++ b/src/mainboard/clevo/cml-u/variants/l140cu/board_info.txt @@ -0,0 +1,2 @@ +Board name: L140CU +Release year: 2020 diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/bootblock.c b/src/mainboard/clevo/cml-u/variants/l140cu/bootblock.c new file mode 100644 index 0000000000..2b673021b5 --- /dev/null +++ b/src/mainboard/clevo/cml-u/variants/l140cu/bootblock.c @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include +#include "gpio.h" + +void bootblock_mainboard_init(void) +{ + gpio_configure_pads(early_gpio_table, ARRAY_SIZE(early_gpio_table)); +} diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/data.vbt b/src/mainboard/clevo/cml-u/variants/l140cu/data.vbt new file mode 100644 index 0000000000..f14d8073e9 Binary files /dev/null and b/src/mainboard/clevo/cml-u/variants/l140cu/data.vbt differ diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb b/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb new file mode 100644 index 0000000000..b1899417b9 --- /dev/null +++ b/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb @@ -0,0 +1,207 @@ +chip soc/intel/cannonlake + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + /* Touchpad */ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 80, + .fall_time_ns = 110, + }, + }" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + +# CPU (soc/intel/cannonlake/cpu.c) + # Power limit + register "power_limits_config" = "{ + .tdp_pl1_override = 20, + .tdp_pl2_override = 30, + }" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Enable Enhanced Intel SpeedStep + register "eist_enable" = "1" + +# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c) + register "SaGv" = "SaGv_Enabled" + #register "enable_c6dram" = "1" + +# FSP Silicon (soc/intel/cannonlake/fsp_params.c) + # Serial I/O + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, // Touchpad + [PchSerialIoIndexUART2] = PchSerialIoSkipInit, // LPSS UART + }" + + # Misc + register "AcousticNoiseMitigation" = "1" + #register "dmipwroptimize" = "1" + #register "satapwroptimize" = "1" + + # Power + register "PchPmSlpS3MinAssert" = "3" # 50ms + register "PchPmSlpS4MinAssert" = "1" # 1s + register "PchPmSlpSusMinAssert" = "2" # 500ms + register "PchPmSlpAMinAssert" = "4" # 2s + + # Thermal + register "tcc_offset" = "12" + +# PM Util (soc/intel/cannonlake/pmutil.c) + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + # sudo devmem2 0xfe001920 (pmc_bar + GPIO_GPE_CFG) + register "gpe0_dw0" = "PMC_GPP_C" + register "gpe0_dw1" = "PMC_GPP_D" + register "gpe0_dw2" = "PMC_GPP_E" + +# Actual device tree + device cpu_cluster 0 on + device lapic 0 on end + end + + device domain 0 on + subsystemid 0x1558 0x1401 inherit + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 04.0 on # SA Thermal device + register "Device4Enable" = "1" + end + device pci 12.0 on end # Thermal Subsystem + device pci 12.5 off end # UFS SCS + device pci 12.6 off end # GSPI #2 + device pci 13.0 off end # Integrated Sensor Hub + device pci 14.0 on # USB xHCI + # USB2 + register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A port 1 + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C port 2 + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Type-A port 3 + register "usb2_ports[6]" = "USB2_PORT_MAX(OC_SKIP)" # Camera + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + # USB3 + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A port 1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C port 2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A port 3 + end + device pci 14.1 off end # USB xDCI (OTG) + chip drivers/intel/wifi # CNVi wifi + register "wake" = "GPE0_PME_B0" + device pci 14.3 on end + end + device pci 14.5 off end # SDCard + device pci 15.0 on + chip drivers/i2c/hid + register "generic.hid" = ""ELAN040D"" + register "generic.desc" = ""ELAN Touchpad"" + register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)" + register "generic.probed" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 15 on end + end + end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 off end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 16.5 off end # Management Engine Interface 4 + device pci 17.0 on # SATA + register "SataMode" = "Sata_AHCI" + register "SataSalpSupport" = "1" + # Port 2 (J_SSD2) + register "SataPortsEnable[1]" = "1" + register "SataPortsDevSlp[1]" = "1" + # Port 3 (J_SSD1) + register "SataPortsEnable[2]" = "1" + register "SataPortsDevSlp[2]" = "1" + end + device pci 19.0 off end # I2C #4 + device pci 19.1 off end # I2C #5 + device pci 19.2 on end # UART #2 + device pci 1a.0 off end # eMMC + device pci 1c.0 off end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 on # PCI Express Port 6 + device pci 00.0 on end # x1 Card reader + register "PcieRpEnable[5]" = "1" + register "PcieRpLtrEnable[5]" = "1" + register "PcieClkSrcUsage[3]" = "5" + register "PcieClkSrcClkReq[3]" = "3" + register "PcieRpSlotImplemented[5]" = "1" + end + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 on # PCI Express Port 8 + device pci 00.0 on end # x1 M.2/E 2230 (J_WLAN1) + register "PcieRpEnable[7]" = "1" + register "PcieRpLtrEnable[7]" = "1" + register "PcieClkSrcUsage[2]" = "7" + register "PcieClkSrcClkReq[2]" = "2" + register "PcieRpSlotImplemented[7]" = "1" + chip drivers/intel/wifi + device pci 00.0 on end + end + smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" "M.2/E 2230 (J_WLAN1)" "SlotDataBusWidth1X" + end + device pci 1d.0 on # PCI Express Port 9 + device pci 00.0 on end # x4 M.2/M 2280 (J_SSD2) + register "PcieRpEnable[8]" = "1" + register "PcieRpLtrEnable[8]" = "1" + register "PcieClkSrcUsage[4]" = "8" + register "PcieClkSrcClkReq[4]" = "4" + register "PcieRpSlotImplemented[8]" = "1" + smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280 (J_SSD2)" "SlotDataBusWidth4X" + end + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1d.4 on # PCI Express Port 13 + device pci 00.0 on end # x4 M.2/M 2280 (J_SSD1) + register "PcieRpEnable[12]" = "1" + register "PcieRpLtrEnable[12]" = "1" + register "PcieClkSrcUsage[5]" = "12" + register "PcieClkSrcClkReq[5]" = "5" + register "PcieRpSlotImplemented[12]" = "1" + smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280 (J_SSD1)" "SlotDataBusWidth4X" + end + device pci 1d.5 off end # PCI Express Port 14 + device pci 1d.6 off end # PCI Express Port 15 + device pci 1d.7 off end # PCI Express Port 16 + device pci 1e.0 off end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1f.0 on # LPC Interface + # LPC configuration from lspci -s 1f.0 -xxx + # Address 0x84: Decode 0x80 - 0x8F (Port 80) + register "gen1_dec" = "0x000c0081" + # Address 0x88: Decode 0x68 - 0x6F (PMC) + register "gen2_dec" = "0x00040069" + # Address 0x8C: Decode 0xE00 - 0xEFF (AP/EC command) + register "gen3_dec" = "0x00fc0E01" + # Address 0x90: Decode 0xF00 - 0xFFF (AP/EC debug) + register "gen4_dec" = "0x00fc0F01" + chip drivers/pc80/tpm # TPM + device pnp 0c31.0 on end + end + end + device pci 1f.1 off end # P2SB + device pci 1f.2 off end # Power Management Controller + device pci 1f.3 on # Intel HDA + register "PchHdaAudioLinkHda" = "1" + end + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/gpio.h b/src/mainboard/clevo/cml-u/variants/l140cu/gpio.h new file mode 100644 index 0000000000..1f7d119947 --- /dev/null +++ b/src/mainboard/clevo/cml-u/variants/l140cu/gpio.h @@ -0,0 +1,256 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include +#include + +#ifndef __ACPI__ + +/* Name format: / */ + +/* Early pad configuration in romstage. */ +static const struct pad_config early_gpio_table[] = { + PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* UART2_RXD */ + PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* UART2_TXD */ + PAD_NC(GPP_C22, UP_20K), + PAD_NC(GPP_C23, UP_20K), +}; + +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { + /* ------- GPIO Group GPD ------- */ + PAD_NC(GPD0, NONE), + PAD_CFG_NF(GPD1, NATIVE, DEEP, NF1), /* ACPRESENT / AC_PRESENT */ + PAD_NC(GPD2, UP_20K), + PAD_CFG_NF(GPD3, UP_20K, DEEP, NF1), /* PWRBTN# / PWR_BTN# */ + PAD_CFG_NF(GPD4, NONE, DEEP, NF1), /* SLP_S3# / SUSB#_PCH */ + PAD_CFG_NF(GPD5, NONE, DEEP, NF1), /* SLP_S4# / SUSC#_PCH */ + PAD_NC(GPD6, UP_20K), + PAD_NC(GPD7, NONE), + PAD_CFG_NF(GPD8, NONE, DEEP, NF1), /* SUSCLK / SUS_CLK */ + PAD_NC(GPD9, UP_20K), + PAD_NC(GPD10, UP_20K), + PAD_NC(GPD11, UP_20K), + + /* ------- GPIO Group GPP_A ------- */ + PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1), /* RCIN# / SB_KBCRST# */ + PAD_CFG_NF(GPP_A1, NATIVE, DEEP, NF1), /* LAD0 / LPC_AD0 */ + PAD_CFG_NF(GPP_A2, NATIVE, DEEP, NF1), /* LAD1 / LPC_AD1 */ + PAD_CFG_NF(GPP_A3, NATIVE, DEEP, NF1), /* LAD2 / LPC_AD2 */ + PAD_CFG_NF(GPP_A4, NATIVE, DEEP, NF1), /* LAD3 / LPC_AD3 */ + PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1), /* LFRAME# / LPC_FRAME# */ + PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), /* SERIRQ */ + PAD_CFG_NF(GPP_A7, NONE, DEEP, NF1), /* PIRQA# / TPM_PIRQ# */ + PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), /* CLKRUN# / PM_CLKRUN# + Note: R209 is populated despite being + marked no-stuff in schematic + */ + PAD_CFG_NF(GPP_A9, DN_20K, DEEP, NF1), /* CLKOUT_LPC0 / PCLK_KBC */ + PAD_NC(GPP_A10, UP_20K), + PAD_NC(GPP_A11, UP_20K), /* INTP_OUT + (Type-C VBUS_SENSE; unused in cb) + */ + PAD_NC(GPP_A12, UP_20K), + PAD_NC(GPP_A13, UP_20K), /* SUSWARN# + (unused due to missing DeepSx support) + */ + PAD_NC(GPP_A14, UP_20K), + PAD_NC(GPP_A15, UP_20K), + PAD_NC(GPP_A16, UP_20K), + PAD_NC(GPP_A17, NONE), /* LEDKB_DET# + (unused in cb; all devices of that + model have KB LED) + */ + PAD_NC(GPP_A18, UP_20K), + PAD_NC(GPP_A19, UP_20K), + PAD_CFG_GPO(GPP_A20, 0, DEEP), /* GPP_A20 / TEST_R */ + PAD_NC(GPP_A21, UP_20K), + PAD_NC(GPP_A22, UP_20K), + PAD_NC(GPP_A23, UP_20K), + + /* ------- GPIO Group GPP_B ------- */ + PAD_NC(GPP_B0, UP_20K), + PAD_NC(GPP_B1, UP_20K), + PAD_NC(GPP_B2, UP_20K), /* CNVI_WAKE# + (UART_WAKE# in M.2 spec; unused) + */ + PAD_CFG_GPI_APIC_EDGE_LOW(GPP_B3, NONE, PLTRST),/* GPP_B3 (touchpad interrupt) */ + PAD_NC(GPP_B4, UP_20K), + PAD_NC(GPP_B5, UP_20K), + PAD_NC(GPP_B6, UP_20K), + PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), /* SRCCLKREQ2# / WLAN_CLKREQ# */ + PAD_CFG_NF(GPP_B8, NONE, DEEP, NF1), /* SRCCLKREQ3# / CARD_CLKREQ# */ + PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1), /* SRCCLKREQ4# / SSD2_CLKREQ# */ + PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1), /* SRCCLKREQ5# / SSD1_CLKREQ# */ + PAD_NC(GPP_B11, NONE), + PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), /* SLP_S0# */ + PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), /* PLT_RST# */ + PAD_CFG_NF(GPP_B14, NONE, DEEP, NF1), /* SPKR / PCH_SPKR */ + PAD_NC(GPP_B15, UP_20K), + PAD_NC(GPP_B16, UP_20K), + PAD_NC(GPP_B17, NONE), + PAD_NC(GPP_B18, UP_20K), + PAD_NC(GPP_B19, UP_20K), + PAD_NC(GPP_B20, UP_20K), + PAD_NC(GPP_B21, UP_20K), + PAD_NC(GPP_B22, UP_20K), + PAD_NC(GPP_B23, UP_20K), + + /* ------- GPIO Group GPP_C ------- */ + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), /* SMBCLK / SMB_CLK_DDR */ + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), /* SMBDATA / SMB_DAT_DDR */ + PAD_NC(GPP_C2, UP_20K), + PAD_NC(GPP_C3, UP_20K), + PAD_NC(GPP_C4, UP_20K), + PAD_NC(GPP_C5, UP_20K), + PAD_NC(GPP_C6, UP_20K), + PAD_NC(GPP_C7, UP_20K), + PAD_NC(GPP_C8, UP_20K), + PAD_NC(GPP_C9, UP_20K), + PAD_NC(GPP_C10, UP_20K), + PAD_NC(GPP_C11, UP_20K), + PAD_NC(GPP_C12, UP_20K), + PAD_CFG_GPO(GPP_C13, 1, PLTRST), /* GPP_C13 / SSD1_PWR_DN# */ + PAD_NC(GPP_C14, UP_20K), + PAD_NC(GPP_C15, UP_20K), + PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), /* I2C0_SDA / T_SDA */ + PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), /* I2C0_SCL / T_SCL */ + PAD_NC(GPP_C18, UP_20K), + PAD_NC(GPP_C19, UP_20K), + PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* UART2_RXD */ + PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* UART2_TXD */ + PAD_NC(GPP_C22, UP_20K), + PAD_NC(GPP_C23, UP_20K), + + /* ------- GPIO Group GPP_D ------- */ + PAD_NC(GPP_D0, UP_20K), + PAD_NC(GPP_D1, UP_20K), + PAD_NC(GPP_D2, UP_20K), + PAD_NC(GPP_D3, UP_20K), + PAD_NC(GPP_D4, UP_20K), + PAD_NC(GPP_D5, UP_20K), + PAD_NC(GPP_D6, UP_20K), + PAD_NC(GPP_D7, UP_20K), + PAD_CFG_GPO(GPP_D8, 1, DEEP), /* SB_BLON */ + PAD_CFG_GPI_SCI_LOW(GPP_D9, NONE, DEEP, LEVEL), /* EC SWI# */ + PAD_NC(GPP_D10, NONE), /* DDR_TYPE_D10 + (unused; there is only one on-board + ram type/model) + */ + PAD_NC(GPP_D11, NONE), /* BOARD_ID + (unused in cb; we already know the + device model) + */ + PAD_NC(GPP_D12, UP_20K), + PAD_NC(GPP_D13, UP_20K), + PAD_CFG_GPO(GPP_D14, 1, PLTRST), /* SSD2_PWR_DN# */ + PAD_NC(GPP_D15, UP_20K), + PAD_NC(GPP_D16, UP_20K), + PAD_NC(GPP_D17, UP_20K), + PAD_NC(GPP_D18, UP_20K), + PAD_NC(GPP_D19, UP_20K), + PAD_NC(GPP_D20, UP_20K), + PAD_NC(GPP_D21, NONE), /* TPM_DET# + (currently unused in cb; there seem + to be no devices without TPM) + */ + PAD_NC(GPP_D22, NONE), /* DDR_TYPE_D22 + (unused in cb; there is only one + on-board ram type) + */ + PAD_NC(GPP_D23, UP_20K), + + /* ------- GPIO Group GPP_E ------- */ + PAD_NC(GPP_E0, UP_20K), + PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), /* SATAXPCIE1 / SATAGP1 */ + PAD_CFG_NF(GPP_E2, NONE, DEEP, NF1), /* SATAXPCIE2 / SATAGP2 */ + PAD_NC(GPP_E3, UP_20K), + PAD_NC(GPP_E4, UP_20K), + PAD_CFG_NF(GPP_E5, NONE, DEEP, NF1), /* DEVSLP1 */ + PAD_CFG_NF(GPP_E6, NONE, DEEP, NF1), /* DEVSLP2 */ + PAD_NC(GPP_E7, UP_20K), + PAD_NC(GPP_E8, NONE), + PAD_NC(GPP_E9, NONE), + PAD_NC(GPP_E10, NONE), + PAD_NC(GPP_E11, NONE), + PAD_NC(GPP_E12, NONE), + PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1), /* DDPB_HPD0 / MUX_HPD */ + PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), /* DDPC_HPD1 / HDMI_HPD */ + PAD_CFG_GPI_SMI_LOW(GPP_E15, NONE, DEEP, EDGE_SINGLE), /* EC SMI# */ + PAD_CFG_GPI_SCI_LOW(GPP_E16, NONE, PLTRST, LEVEL), /* EC SCI# */ + PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1), /* EDP_HPD */ + PAD_NC(GPP_E18, UP_20K), + PAD_NC(GPP_E19, NONE), + PAD_CFG_NF(GPP_E20, NONE, DEEP, NF1), /* DPPC_CTRLCLK / HDMI_CTRLCLK */ + PAD_CFG_NF(GPP_E21, NONE, DEEP, NF1), /* DPPC_CTRLDATA / HDMI_CTRLDATA */ + PAD_NC(GPP_E22, UP_20K), + PAD_NC(GPP_E23, UP_20K), + + /* ------- GPIO Group GPP_F ------- */ + PAD_NC(GPP_F0, UP_20K), + PAD_NC(GPP_F1, UP_20K), + PAD_NC(GPP_F2, UP_20K), + PAD_NC(GPP_F3, UP_20K), + PAD_CFG_NF(GPP_F4, NONE, DEEP, NF1), /* CNV_BRI_DT / CNVI_BRI_DT */ + PAD_CFG_NF(GPP_F5, UP_20K, DEEP, NF1), /* CNV_BRI_RSP / CNVI_BRI_RSP */ + PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1), /* CNV_RGI_DT / CNVI_RGI_DT */ + PAD_CFG_NF(GPP_F7, UP_20K, DEEP, NF1), /* CNV_RGI_RSP / CNVI_RGI_RSP */ + PAD_NC(GPP_F8, UP_20K), + PAD_NC(GPP_F9, UP_20K), + PAD_NC(GPP_F10, UP_20K), + PAD_NC(GPP_F11, UP_20K), + PAD_NC(GPP_F12, UP_20K), + PAD_NC(GPP_F13, UP_20K), + PAD_NC(GPP_F14, UP_20K), + PAD_NC(GPP_F15, UP_20K), + PAD_NC(GPP_F16, UP_20K), + PAD_NC(GPP_F17, UP_20K), + PAD_NC(GPP_F18, UP_20K), + PAD_NC(GPP_F19, UP_20K), + PAD_NC(GPP_F20, UP_20K), + PAD_NC(GPP_F21, UP_20K), + PAD_NC(GPP_F22, UP_20K), + PAD_NC(GPP_F23, NONE), + + /* ------- GPIO Group GPP_G ------- */ + PAD_NC(GPP_G0, UP_20K), + PAD_NC(GPP_G1, UP_20K), + PAD_NC(GPP_G2, UP_20K), + PAD_NC(GPP_G3, UP_20K), + PAD_NC(GPP_G4, UP_20K), + PAD_NC(GPP_G5, UP_20K), + PAD_NC(GPP_G6, UP_20K), + PAD_NC(GPP_G7, UP_20K), + + /* ------- GPIO Group GPP_H ------- */ + PAD_NC(GPP_H0, UP_20K), + PAD_CFG_NF(GPP_H1, NONE, DEEP, NF3), /* CNV_RF_RESET# / CNVI_RST# */ + PAD_CFG_NF(GPP_H2, DN_20K, DEEP, NF3), /* MODEM_CLKREQ / CNVI_CLKREQ */ + PAD_NC(GPP_H3, UP_20K), + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), /* I2C2_SDA / SMD_7411 */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), /* I2C2_SCL / SMC_7411 */ + PAD_NC(GPP_H6, UP_20K), + PAD_NC(GPP_H7, UP_20K), + PAD_NC(GPP_H8, UP_20K), + PAD_NC(GPP_H9, UP_20K), + PAD_NC(GPP_H10, UP_20K), + PAD_NC(GPP_H11, UP_20K), + PAD_NC(GPP_H12, UP_20K), + PAD_NC(GPP_H13, UP_20K), + PAD_NC(GPP_H14, UP_20K), + PAD_NC(GPP_H15, UP_20K), + PAD_NC(GPP_H16, UP_20K), + PAD_NC(GPP_H17, UP_20K), + PAD_CFG_NF(GPP_H18, NONE, DEEP, NF1), /* CPU_C10_GATE# */ + PAD_NC(GPP_H19, UP_20K), + PAD_NC(GPP_H20, UP_20K), + PAD_NC(GPP_H21, NONE), + PAD_NC(GPP_H22, UP_20K), + PAD_NC(GPP_H23, UP_20K), +}; + +#endif + +#endif diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/hda_verb.c b/src/mainboard/clevo/cml-u/variants/l140cu/hda_verb.c new file mode 100644 index 0000000000..7bb073698d --- /dev/null +++ b/src/mainboard/clevo/cml-u/variants/l140cu/hda_verb.c @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +const u32 cim_verb_data[] = { + /* Realtek ALC293 */ + 0x10ec0293, /* Vendor ID */ + 0x15581401, /* Subsystem ID */ + 12, /* Number of entries */ + AZALIA_SUBVENDOR(0, 0x15581401), + AZALIA_PIN_CFG(0, 0x12, 0x90a60130), + AZALIA_PIN_CFG(0, 0x13, 0x40000000), + AZALIA_PIN_CFG(0, 0x14, 0x90170110), + AZALIA_PIN_CFG(0, 0x15, 0x02211020), + AZALIA_PIN_CFG(0, 0x16, 0x411111f0), + AZALIA_PIN_CFG(0, 0x18, 0x411111f0), + AZALIA_PIN_CFG(0, 0x19, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1a, 0x01a1913c), + AZALIA_PIN_CFG(0, 0x1b, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1d, 0x41748245), + AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), + + /* Intel GPU HDMI */ + 0x8086280b, /* Vendor ID */ + 0x80860101, /* Subsystem ID */ + 4, /* Number of entries */ + AZALIA_SUBVENDOR(2, 0x80860101), + AZALIA_PIN_CFG(2, 0x05, 0x18560010), + AZALIA_PIN_CFG(2, 0x06, 0x18560010), + AZALIA_PIN_CFG(2, 0x07, 0x18560010), +}; + +const u32 pc_beep_verbs[] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/ramstage.c b/src/mainboard/clevo/cml-u/variants/l140cu/ramstage.c new file mode 100644 index 0000000000..4b0ddd4823 --- /dev/null +++ b/src/mainboard/clevo/cml-u/variants/l140cu/ramstage.c @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include "gpio.h" + +void mainboard_silicon_init_params(FSP_S_CONFIG *params) +{ + /* Configure pads prior to SiliconInit() in case there's any + * dependencies during hardware initialization. */ + cnl_configure_pads(gpio_table, ARRAY_SIZE(gpio_table)); +} diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/romstage.c b/src/mainboard/clevo/cml-u/variants/l140cu/romstage.c new file mode 100644 index 0000000000..1af8ce6633 --- /dev/null +++ b/src/mainboard/clevo/cml-u/variants/l140cu/romstage.c @@ -0,0 +1,84 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include + +static const struct cnl_mb_cfg memcfg = { + /* Parameters required to access SPD for CH0D0/CH0D1/CH1D0/CH1D1. */ + .spd[0] = { + .read_type = READ_SPD_CBFS, + .spd_spec = {.spd_index = 0}, + }, + .spd[1] = {.read_type = NOT_EXISTING}, + .spd[2] = { + .read_type = READ_SMBUS, + .spd_spec = {.spd_smbus_address = 0xa4}, + }, + .spd[3] = {.read_type = NOT_EXISTING}, + + /* + * For each channel, there are 3 sets of DQ byte mappings, + * where each set has a package 0 and a package 1 value (package 0 + * represents the first 64-bit lpddr4 chip combination, and package 1 + * represents the second 64-bit lpddr4 chip combination). + * The first three sets are for CLK, CMD, and CTL. + * The fsp package actually expects 6 sets, but the last 3 sets are + * not used in CNL, so we only define the three sets that are used + * and let the meminit_lpddr4() routine take care of clearing the + * unused fields for the caller. + */ + .dq_map[DDR_CH0] = { + {0x0F, 0xF0}, {0x00, 0xF0}, {0x0F, 0xF0}, + //{0x0F, 0x00}, {0xFF, 0x00}, {0xFF, 0x00} + }, + .dq_map[DDR_CH1] = { + {0x33, 0xCC}, {0x00, 0xCC}, {0x33, 0xCC}, + //{0x33, 0x00}, {0xFF, 0x00}, {0xFF, 0x00} + }, + + /* + * DQS CPU<>DRAM map Ch0 and Ch1. Each array entry represents a + * mapping of a dq bit on the CPU to the bit it's connected to on + * the memory part. The array index represents the dqs bit number + * on the memory part, and the values in the array represent which + * pin on the CPU that DRAM pin connects to. + */ + .dqs_map[DDR_CH0] = {0, 1, 2, 3, 4, 5, 6, 7}, + .dqs_map[DDR_CH1] = {1, 0, 2, 3, 4, 5, 6, 7}, + + /* + * Rcomp resistor values. These values represent the resistance in + * ohms of the three rcomp resistors attached to the DDR_COMP_0, + * DDR_COMP_1, and DDR_COMP_2 pins on the DRAM. + */ + .rcomp_resistor = { 121, 81, 100 }, + + /* + * Rcomp target values. These will typically be the following + * values for Cannon Lake : { 80, 40, 40, 40, 30 } + */ + .rcomp_targets = { 100, 40, 20, 20, 26 }, + + /* + * Indicates whether memory is interleaved. + * Set to 1 for an interleaved design, + * set to 0 for non-interleaved design. + */ + .dq_pins_interleaved = 1, + + /* + * VREF_CA configuration. + * Set to 0 VREF_CA goes to both CH_A and CH_B, + * set to 1 VREF_CA goes to CH_A and VREF_DQ_A goes to CH_B, + * set to 2 VREF_CA goes to CH_A and VREF_DQ_B goes to CH_B. + */ + .vref_ca_config = 2, + + /* Early Command Training */ + .ect = 0, +}; + +void mainboard_memory_init_params(FSPM_UPD *memupd) +{ + cannonlake_memcfg_init(&memupd->FspmConfig, &memcfg); +} diff --git a/src/mainboard/clevo/l140cu/Kconfig b/src/mainboard/clevo/l140cu/Kconfig deleted file mode 100644 index c158adddfc..0000000000 --- a/src/mainboard/clevo/l140cu/Kconfig +++ /dev/null @@ -1,88 +0,0 @@ -if BOARD_CLEVO_L140CU - -config BOARD_SPECIFIC_OPTIONS - def_bool y - select BOARD_ROMSIZE_KB_16384 - select DRIVERS_I2C_HID - select EC_SYSTEM76_EC - select HAVE_ACPI_RESUME - select HAVE_ACPI_TABLES - select HAVE_SMI_HANDLER - select HAVE_SPD_IN_CBFS - select INTEL_GMA_HAVE_VBT - select INTEL_LPSS_UART_FOR_CONSOLE - select MAINBOARD_HAS_LPC_TPM - select MAINBOARD_HAS_TPM2 - select NO_UART_ON_SUPERIO - select SOC_INTEL_COMETLAKE_1 - select SOC_INTEL_COMMON_BLOCK_HDA - select SOC_INTEL_COMMON_BLOCK_HDA_VERB - select SPD_READ_BY_WORD - select SYSTEM_TYPE_LAPTOP - select USE_LEGACY_8254_TIMER # Fix failure to boot GRUB - -config MAINBOARD_DIR - string - default "clevo/l140cu" - -config MAINBOARD_PART_NUMBER - string - default "L140CU" if BOARD_CLEVO_L140CU - -config MAINBOARD_SMBIOS_PRODUCT_NAME - string - default "L140CU" if BOARD_CLEVO_L140CU - -config MAINBOARD_VERSION - string - default "2.1A" if BOARD_CLEVO_L140CU - -config DEVICETREE - string - default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb" - -config CBFS_SIZE - hex - default 0xc00000 if BOARD_CLEVO_L140CU - -config CONSOLE_POST - bool - default y - -config UART_FOR_CONSOLE - int - default 2 - -config MAX_CPUS - int - default 8 if BOARD_CLEVO_L140CU - -config DIMM_MAX - int - default 2 if BOARD_CLEVO_L140CU - -config DIMM_SPD_SIZE - int - default 512 - -config VGA_BIOS_FILE - string - default "pci8086,9b41.rom" - -config VGA_BIOS_ID - string - default "8086,9b41" - -config TPM_PIRQ - hex - default 0x10 if BOARD_CLEVO_L140CU # GPP_A7/PIRQA# - -config POST_DEVICE - bool - default n - -config VARIANT_DIR - string - default "l140cu" if BOARD_CLEVO_L140CU - -endif diff --git a/src/mainboard/clevo/l140cu/Kconfig.name b/src/mainboard/clevo/l140cu/Kconfig.name deleted file mode 100644 index d5f867a475..0000000000 --- a/src/mainboard/clevo/l140cu/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_CLEVO_L140CU - bool "L140CU" diff --git a/src/mainboard/clevo/l140cu/Makefile.inc b/src/mainboard/clevo/l140cu/Makefile.inc deleted file mode 100644 index 6a388f27a1..0000000000 --- a/src/mainboard/clevo/l140cu/Makefile.inc +++ /dev/null @@ -1 +0,0 @@ -subdirs-y += variants/$(VARIANT_DIR) diff --git a/src/mainboard/clevo/l140cu/acpi/gpe.asl b/src/mainboard/clevo/l140cu/acpi/gpe.asl deleted file mode 100644 index c1bc04dc9a..0000000000 --- a/src/mainboard/clevo/l140cu/acpi/gpe.asl +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -// GPP_D9 SCI -Method (_L29, 0, Serialized) { - Debug = Concatenate("GPE _L29: ", ToHexString(\_SB.PCI0.LPCB.EC0.WFNO)) - If (\_SB.PCI0.LPCB.EC0.ECOK) { - If (\_SB.PCI0.LPCB.EC0.WFNO == One) { - Notify(\_SB.LID0, 0x80) - } - } -} diff --git a/src/mainboard/clevo/l140cu/acpi/mainboard.asl b/src/mainboard/clevo/l140cu/acpi/mainboard.asl deleted file mode 100644 index dfa81d3914..0000000000 --- a/src/mainboard/clevo/l140cu/acpi/mainboard.asl +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#define EC_GPE_SCI 0x50 /* GPP_E16 */ -#define EC_GPE_SWI 0x29 /* GPP_D9 */ -#define EC_COLOR_KEYBOARD 0 -#include - -Scope (\_SB) { - #include "sleep.asl" -} - -Scope (\_GPE) { - #include "gpe.asl" -} diff --git a/src/mainboard/clevo/l140cu/acpi/sleep.asl b/src/mainboard/clevo/l140cu/acpi/sleep.asl deleted file mode 100644 index 48c50e075e..0000000000 --- a/src/mainboard/clevo/l140cu/acpi/sleep.asl +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* Method called from _PTS prior to enter sleep state */ -Method (MPTS, 1) { - \_SB.PCI0.LPCB.EC0.PTS (Arg0) -} - -/* Method called from _WAK prior to wakeup */ -Method (MWAK, 1) { - \_SB.PCI0.LPCB.EC0.WAK (Arg0) -} diff --git a/src/mainboard/clevo/l140cu/board_info.txt b/src/mainboard/clevo/l140cu/board_info.txt deleted file mode 100644 index 67109938da..0000000000 --- a/src/mainboard/clevo/l140cu/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Vendor name: Clevo -Category: laptop -ROM package: SOIC-8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/clevo/l140cu/dsdt.asl b/src/mainboard/clevo/l140cu/dsdt.asl deleted file mode 100644 index eac27b56f1..0000000000 --- a/src/mainboard/clevo/l140cu/dsdt.asl +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 and up - OEM_ID, - ACPI_TABLE_CREATOR, - 0x20110725 // OEM revision -) -{ - #include - #include - #include - - Device (\_SB.PCI0) - { - #include - #include - } - - #include - - Scope (\_SB.PCI0.LPCB) - { - #include - } - - #include "acpi/mainboard.asl" -} diff --git a/src/mainboard/clevo/l140cu/spd/samsung-K4AAG165WA-BCTD.spd.hex b/src/mainboard/clevo/l140cu/spd/samsung-K4AAG165WA-BCTD.spd.hex deleted file mode 100644 index f747f7c34e..0000000000 --- a/src/mainboard/clevo/l140cu/spd/samsung-K4AAG165WA-BCTD.spd.hex +++ /dev/null @@ -1,33 +0,0 @@ -# Samsung K4AAG165WA-BCTD -23 11 0C 03 46 29 00 08 00 60 00 03 02 03 00 00 -00 00 06 0D F8 3F 00 00 6E 6E 6E 11 00 6E F0 0A -20 08 00 05 00 F0 2B 34 28 00 78 00 14 3C 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 16 36 0B 35 -16 36 0B 35 00 00 16 36 0B 35 16 36 0B 35 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 9C B5 00 00 00 00 E7 00 F7 4B -0F 11 02 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 DB 08 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -80 CE 00 00 00 00 00 00 00 4B 34 41 41 47 31 36 -35 57 41 2D 42 43 54 44 20 20 20 20 20 00 80 CE -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/clevo/l140cu/variants/l140cu/Makefile.inc b/src/mainboard/clevo/l140cu/variants/l140cu/Makefile.inc deleted file mode 100644 index 3d742d6e13..0000000000 --- a/src/mainboard/clevo/l140cu/variants/l140cu/Makefile.inc +++ /dev/null @@ -1,4 +0,0 @@ -bootblock-y += bootblock.c -ramstage-y += ramstage.c -ramstage-y += hda_verb.c -SPD_SOURCES = samsung-K4AAG165WA-BCTD diff --git a/src/mainboard/clevo/l140cu/variants/l140cu/board_info.txt b/src/mainboard/clevo/l140cu/variants/l140cu/board_info.txt deleted file mode 100644 index 86230320af..0000000000 --- a/src/mainboard/clevo/l140cu/variants/l140cu/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Board name: L140CU -Release year: 2020 diff --git a/src/mainboard/clevo/l140cu/variants/l140cu/bootblock.c b/src/mainboard/clevo/l140cu/variants/l140cu/bootblock.c deleted file mode 100644 index 2b673021b5..0000000000 --- a/src/mainboard/clevo/l140cu/variants/l140cu/bootblock.c +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include -#include -#include "gpio.h" - -void bootblock_mainboard_init(void) -{ - gpio_configure_pads(early_gpio_table, ARRAY_SIZE(early_gpio_table)); -} diff --git a/src/mainboard/clevo/l140cu/variants/l140cu/data.vbt b/src/mainboard/clevo/l140cu/variants/l140cu/data.vbt deleted file mode 100644 index f14d8073e9..0000000000 Binary files a/src/mainboard/clevo/l140cu/variants/l140cu/data.vbt and /dev/null differ diff --git a/src/mainboard/clevo/l140cu/variants/l140cu/devicetree.cb b/src/mainboard/clevo/l140cu/variants/l140cu/devicetree.cb deleted file mode 100644 index b1899417b9..0000000000 --- a/src/mainboard/clevo/l140cu/variants/l140cu/devicetree.cb +++ /dev/null @@ -1,207 +0,0 @@ -chip soc/intel/cannonlake - register "common_soc_config" = "{ - .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, - /* Touchpad */ - .i2c[0] = { - .speed = I2C_SPEED_FAST, - .rise_time_ns = 80, - .fall_time_ns = 110, - }, - }" - - # Send an extra VR mailbox command for the PS4 exit issue - register "SendVrMbxCmd" = "2" - -# CPU (soc/intel/cannonlake/cpu.c) - # Power limit - register "power_limits_config" = "{ - .tdp_pl1_override = 20, - .tdp_pl2_override = 30, - }" - - # Enable "Intel Speed Shift Technology" - register "speed_shift_enable" = "1" - - # Enable Enhanced Intel SpeedStep - register "eist_enable" = "1" - -# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c) - register "SaGv" = "SaGv_Enabled" - #register "enable_c6dram" = "1" - -# FSP Silicon (soc/intel/cannonlake/fsp_params.c) - # Serial I/O - register "SerialIoDevMode" = "{ - [PchSerialIoIndexI2C0] = PchSerialIoPci, // Touchpad - [PchSerialIoIndexUART2] = PchSerialIoSkipInit, // LPSS UART - }" - - # Misc - register "AcousticNoiseMitigation" = "1" - #register "dmipwroptimize" = "1" - #register "satapwroptimize" = "1" - - # Power - register "PchPmSlpS3MinAssert" = "3" # 50ms - register "PchPmSlpS4MinAssert" = "1" # 1s - register "PchPmSlpSusMinAssert" = "2" # 500ms - register "PchPmSlpAMinAssert" = "4" # 2s - - # Thermal - register "tcc_offset" = "12" - -# PM Util (soc/intel/cannonlake/pmutil.c) - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - # sudo devmem2 0xfe001920 (pmc_bar + GPIO_GPE_CFG) - register "gpe0_dw0" = "PMC_GPP_C" - register "gpe0_dw1" = "PMC_GPP_D" - register "gpe0_dw2" = "PMC_GPP_E" - -# Actual device tree - device cpu_cluster 0 on - device lapic 0 on end - end - - device domain 0 on - subsystemid 0x1558 0x1401 inherit - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 04.0 on # SA Thermal device - register "Device4Enable" = "1" - end - device pci 12.0 on end # Thermal Subsystem - device pci 12.5 off end # UFS SCS - device pci 12.6 off end # GSPI #2 - device pci 13.0 off end # Integrated Sensor Hub - device pci 14.0 on # USB xHCI - # USB2 - register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A port 1 - register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C port 2 - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Type-A port 3 - register "usb2_ports[6]" = "USB2_PORT_MAX(OC_SKIP)" # Camera - register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - # USB3 - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A port 1 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C port 2 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A port 3 - end - device pci 14.1 off end # USB xDCI (OTG) - chip drivers/intel/wifi # CNVi wifi - register "wake" = "GPE0_PME_B0" - device pci 14.3 on end - end - device pci 14.5 off end # SDCard - device pci 15.0 on - chip drivers/i2c/hid - register "generic.hid" = ""ELAN040D"" - register "generic.desc" = ""ELAN Touchpad"" - register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)" - register "generic.probed" = "1" - register "hid_desc_reg_offset" = "0x01" - device i2c 15 on end - end - end # I2C #0 - device pci 15.1 off end # I2C #1 - device pci 15.2 off end # I2C #2 - device pci 15.3 off end # I2C #3 - device pci 16.0 off end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 16.5 off end # Management Engine Interface 4 - device pci 17.0 on # SATA - register "SataMode" = "Sata_AHCI" - register "SataSalpSupport" = "1" - # Port 2 (J_SSD2) - register "SataPortsEnable[1]" = "1" - register "SataPortsDevSlp[1]" = "1" - # Port 3 (J_SSD1) - register "SataPortsEnable[2]" = "1" - register "SataPortsDevSlp[2]" = "1" - end - device pci 19.0 off end # I2C #4 - device pci 19.1 off end # I2C #5 - device pci 19.2 on end # UART #2 - device pci 1a.0 off end # eMMC - device pci 1c.0 off end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 off end # PCI Express Port 5 - device pci 1c.5 on # PCI Express Port 6 - device pci 00.0 on end # x1 Card reader - register "PcieRpEnable[5]" = "1" - register "PcieRpLtrEnable[5]" = "1" - register "PcieClkSrcUsage[3]" = "5" - register "PcieClkSrcClkReq[3]" = "3" - register "PcieRpSlotImplemented[5]" = "1" - end - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 on # PCI Express Port 8 - device pci 00.0 on end # x1 M.2/E 2230 (J_WLAN1) - register "PcieRpEnable[7]" = "1" - register "PcieRpLtrEnable[7]" = "1" - register "PcieClkSrcUsage[2]" = "7" - register "PcieClkSrcClkReq[2]" = "2" - register "PcieRpSlotImplemented[7]" = "1" - chip drivers/intel/wifi - device pci 00.0 on end - end - smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" "M.2/E 2230 (J_WLAN1)" "SlotDataBusWidth1X" - end - device pci 1d.0 on # PCI Express Port 9 - device pci 00.0 on end # x4 M.2/M 2280 (J_SSD2) - register "PcieRpEnable[8]" = "1" - register "PcieRpLtrEnable[8]" = "1" - register "PcieClkSrcUsage[4]" = "8" - register "PcieClkSrcClkReq[4]" = "4" - register "PcieRpSlotImplemented[8]" = "1" - smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280 (J_SSD2)" "SlotDataBusWidth4X" - end - device pci 1d.1 off end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1d.4 on # PCI Express Port 13 - device pci 00.0 on end # x4 M.2/M 2280 (J_SSD1) - register "PcieRpEnable[12]" = "1" - register "PcieRpLtrEnable[12]" = "1" - register "PcieClkSrcUsage[5]" = "12" - register "PcieClkSrcClkReq[5]" = "5" - register "PcieRpSlotImplemented[12]" = "1" - smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280 (J_SSD1)" "SlotDataBusWidth4X" - end - device pci 1d.5 off end # PCI Express Port 14 - device pci 1d.6 off end # PCI Express Port 15 - device pci 1d.7 off end # PCI Express Port 16 - device pci 1e.0 off end # UART #0 - device pci 1e.1 off end # UART #1 - device pci 1e.2 off end # GSPI #0 - device pci 1e.3 off end # GSPI #1 - device pci 1f.0 on # LPC Interface - # LPC configuration from lspci -s 1f.0 -xxx - # Address 0x84: Decode 0x80 - 0x8F (Port 80) - register "gen1_dec" = "0x000c0081" - # Address 0x88: Decode 0x68 - 0x6F (PMC) - register "gen2_dec" = "0x00040069" - # Address 0x8C: Decode 0xE00 - 0xEFF (AP/EC command) - register "gen3_dec" = "0x00fc0E01" - # Address 0x90: Decode 0xF00 - 0xFFF (AP/EC debug) - register "gen4_dec" = "0x00fc0F01" - chip drivers/pc80/tpm # TPM - device pnp 0c31.0 on end - end - end - device pci 1f.1 off end # P2SB - device pci 1f.2 off end # Power Management Controller - device pci 1f.3 on # Intel HDA - register "PchHdaAudioLinkHda" = "1" - end - device pci 1f.4 on end # SMBus - device pci 1f.5 on end # PCH SPI - device pci 1f.6 off end # GbE - end -end diff --git a/src/mainboard/clevo/l140cu/variants/l140cu/gpio.h b/src/mainboard/clevo/l140cu/variants/l140cu/gpio.h deleted file mode 100644 index 1f7d119947..0000000000 --- a/src/mainboard/clevo/l140cu/variants/l140cu/gpio.h +++ /dev/null @@ -1,256 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef MAINBOARD_GPIO_H -#define MAINBOARD_GPIO_H - -#include -#include - -#ifndef __ACPI__ - -/* Name format: / */ - -/* Early pad configuration in romstage. */ -static const struct pad_config early_gpio_table[] = { - PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* UART2_RXD */ - PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* UART2_TXD */ - PAD_NC(GPP_C22, UP_20K), - PAD_NC(GPP_C23, UP_20K), -}; - -/* Pad configuration in ramstage. */ -static const struct pad_config gpio_table[] = { - /* ------- GPIO Group GPD ------- */ - PAD_NC(GPD0, NONE), - PAD_CFG_NF(GPD1, NATIVE, DEEP, NF1), /* ACPRESENT / AC_PRESENT */ - PAD_NC(GPD2, UP_20K), - PAD_CFG_NF(GPD3, UP_20K, DEEP, NF1), /* PWRBTN# / PWR_BTN# */ - PAD_CFG_NF(GPD4, NONE, DEEP, NF1), /* SLP_S3# / SUSB#_PCH */ - PAD_CFG_NF(GPD5, NONE, DEEP, NF1), /* SLP_S4# / SUSC#_PCH */ - PAD_NC(GPD6, UP_20K), - PAD_NC(GPD7, NONE), - PAD_CFG_NF(GPD8, NONE, DEEP, NF1), /* SUSCLK / SUS_CLK */ - PAD_NC(GPD9, UP_20K), - PAD_NC(GPD10, UP_20K), - PAD_NC(GPD11, UP_20K), - - /* ------- GPIO Group GPP_A ------- */ - PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1), /* RCIN# / SB_KBCRST# */ - PAD_CFG_NF(GPP_A1, NATIVE, DEEP, NF1), /* LAD0 / LPC_AD0 */ - PAD_CFG_NF(GPP_A2, NATIVE, DEEP, NF1), /* LAD1 / LPC_AD1 */ - PAD_CFG_NF(GPP_A3, NATIVE, DEEP, NF1), /* LAD2 / LPC_AD2 */ - PAD_CFG_NF(GPP_A4, NATIVE, DEEP, NF1), /* LAD3 / LPC_AD3 */ - PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1), /* LFRAME# / LPC_FRAME# */ - PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), /* SERIRQ */ - PAD_CFG_NF(GPP_A7, NONE, DEEP, NF1), /* PIRQA# / TPM_PIRQ# */ - PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), /* CLKRUN# / PM_CLKRUN# - Note: R209 is populated despite being - marked no-stuff in schematic - */ - PAD_CFG_NF(GPP_A9, DN_20K, DEEP, NF1), /* CLKOUT_LPC0 / PCLK_KBC */ - PAD_NC(GPP_A10, UP_20K), - PAD_NC(GPP_A11, UP_20K), /* INTP_OUT - (Type-C VBUS_SENSE; unused in cb) - */ - PAD_NC(GPP_A12, UP_20K), - PAD_NC(GPP_A13, UP_20K), /* SUSWARN# - (unused due to missing DeepSx support) - */ - PAD_NC(GPP_A14, UP_20K), - PAD_NC(GPP_A15, UP_20K), - PAD_NC(GPP_A16, UP_20K), - PAD_NC(GPP_A17, NONE), /* LEDKB_DET# - (unused in cb; all devices of that - model have KB LED) - */ - PAD_NC(GPP_A18, UP_20K), - PAD_NC(GPP_A19, UP_20K), - PAD_CFG_GPO(GPP_A20, 0, DEEP), /* GPP_A20 / TEST_R */ - PAD_NC(GPP_A21, UP_20K), - PAD_NC(GPP_A22, UP_20K), - PAD_NC(GPP_A23, UP_20K), - - /* ------- GPIO Group GPP_B ------- */ - PAD_NC(GPP_B0, UP_20K), - PAD_NC(GPP_B1, UP_20K), - PAD_NC(GPP_B2, UP_20K), /* CNVI_WAKE# - (UART_WAKE# in M.2 spec; unused) - */ - PAD_CFG_GPI_APIC_EDGE_LOW(GPP_B3, NONE, PLTRST),/* GPP_B3 (touchpad interrupt) */ - PAD_NC(GPP_B4, UP_20K), - PAD_NC(GPP_B5, UP_20K), - PAD_NC(GPP_B6, UP_20K), - PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), /* SRCCLKREQ2# / WLAN_CLKREQ# */ - PAD_CFG_NF(GPP_B8, NONE, DEEP, NF1), /* SRCCLKREQ3# / CARD_CLKREQ# */ - PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1), /* SRCCLKREQ4# / SSD2_CLKREQ# */ - PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1), /* SRCCLKREQ5# / SSD1_CLKREQ# */ - PAD_NC(GPP_B11, NONE), - PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), /* SLP_S0# */ - PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), /* PLT_RST# */ - PAD_CFG_NF(GPP_B14, NONE, DEEP, NF1), /* SPKR / PCH_SPKR */ - PAD_NC(GPP_B15, UP_20K), - PAD_NC(GPP_B16, UP_20K), - PAD_NC(GPP_B17, NONE), - PAD_NC(GPP_B18, UP_20K), - PAD_NC(GPP_B19, UP_20K), - PAD_NC(GPP_B20, UP_20K), - PAD_NC(GPP_B21, UP_20K), - PAD_NC(GPP_B22, UP_20K), - PAD_NC(GPP_B23, UP_20K), - - /* ------- GPIO Group GPP_C ------- */ - PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), /* SMBCLK / SMB_CLK_DDR */ - PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), /* SMBDATA / SMB_DAT_DDR */ - PAD_NC(GPP_C2, UP_20K), - PAD_NC(GPP_C3, UP_20K), - PAD_NC(GPP_C4, UP_20K), - PAD_NC(GPP_C5, UP_20K), - PAD_NC(GPP_C6, UP_20K), - PAD_NC(GPP_C7, UP_20K), - PAD_NC(GPP_C8, UP_20K), - PAD_NC(GPP_C9, UP_20K), - PAD_NC(GPP_C10, UP_20K), - PAD_NC(GPP_C11, UP_20K), - PAD_NC(GPP_C12, UP_20K), - PAD_CFG_GPO(GPP_C13, 1, PLTRST), /* GPP_C13 / SSD1_PWR_DN# */ - PAD_NC(GPP_C14, UP_20K), - PAD_NC(GPP_C15, UP_20K), - PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), /* I2C0_SDA / T_SDA */ - PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), /* I2C0_SCL / T_SCL */ - PAD_NC(GPP_C18, UP_20K), - PAD_NC(GPP_C19, UP_20K), - PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* UART2_RXD */ - PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* UART2_TXD */ - PAD_NC(GPP_C22, UP_20K), - PAD_NC(GPP_C23, UP_20K), - - /* ------- GPIO Group GPP_D ------- */ - PAD_NC(GPP_D0, UP_20K), - PAD_NC(GPP_D1, UP_20K), - PAD_NC(GPP_D2, UP_20K), - PAD_NC(GPP_D3, UP_20K), - PAD_NC(GPP_D4, UP_20K), - PAD_NC(GPP_D5, UP_20K), - PAD_NC(GPP_D6, UP_20K), - PAD_NC(GPP_D7, UP_20K), - PAD_CFG_GPO(GPP_D8, 1, DEEP), /* SB_BLON */ - PAD_CFG_GPI_SCI_LOW(GPP_D9, NONE, DEEP, LEVEL), /* EC SWI# */ - PAD_NC(GPP_D10, NONE), /* DDR_TYPE_D10 - (unused; there is only one on-board - ram type/model) - */ - PAD_NC(GPP_D11, NONE), /* BOARD_ID - (unused in cb; we already know the - device model) - */ - PAD_NC(GPP_D12, UP_20K), - PAD_NC(GPP_D13, UP_20K), - PAD_CFG_GPO(GPP_D14, 1, PLTRST), /* SSD2_PWR_DN# */ - PAD_NC(GPP_D15, UP_20K), - PAD_NC(GPP_D16, UP_20K), - PAD_NC(GPP_D17, UP_20K), - PAD_NC(GPP_D18, UP_20K), - PAD_NC(GPP_D19, UP_20K), - PAD_NC(GPP_D20, UP_20K), - PAD_NC(GPP_D21, NONE), /* TPM_DET# - (currently unused in cb; there seem - to be no devices without TPM) - */ - PAD_NC(GPP_D22, NONE), /* DDR_TYPE_D22 - (unused in cb; there is only one - on-board ram type) - */ - PAD_NC(GPP_D23, UP_20K), - - /* ------- GPIO Group GPP_E ------- */ - PAD_NC(GPP_E0, UP_20K), - PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), /* SATAXPCIE1 / SATAGP1 */ - PAD_CFG_NF(GPP_E2, NONE, DEEP, NF1), /* SATAXPCIE2 / SATAGP2 */ - PAD_NC(GPP_E3, UP_20K), - PAD_NC(GPP_E4, UP_20K), - PAD_CFG_NF(GPP_E5, NONE, DEEP, NF1), /* DEVSLP1 */ - PAD_CFG_NF(GPP_E6, NONE, DEEP, NF1), /* DEVSLP2 */ - PAD_NC(GPP_E7, UP_20K), - PAD_NC(GPP_E8, NONE), - PAD_NC(GPP_E9, NONE), - PAD_NC(GPP_E10, NONE), - PAD_NC(GPP_E11, NONE), - PAD_NC(GPP_E12, NONE), - PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1), /* DDPB_HPD0 / MUX_HPD */ - PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), /* DDPC_HPD1 / HDMI_HPD */ - PAD_CFG_GPI_SMI_LOW(GPP_E15, NONE, DEEP, EDGE_SINGLE), /* EC SMI# */ - PAD_CFG_GPI_SCI_LOW(GPP_E16, NONE, PLTRST, LEVEL), /* EC SCI# */ - PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1), /* EDP_HPD */ - PAD_NC(GPP_E18, UP_20K), - PAD_NC(GPP_E19, NONE), - PAD_CFG_NF(GPP_E20, NONE, DEEP, NF1), /* DPPC_CTRLCLK / HDMI_CTRLCLK */ - PAD_CFG_NF(GPP_E21, NONE, DEEP, NF1), /* DPPC_CTRLDATA / HDMI_CTRLDATA */ - PAD_NC(GPP_E22, UP_20K), - PAD_NC(GPP_E23, UP_20K), - - /* ------- GPIO Group GPP_F ------- */ - PAD_NC(GPP_F0, UP_20K), - PAD_NC(GPP_F1, UP_20K), - PAD_NC(GPP_F2, UP_20K), - PAD_NC(GPP_F3, UP_20K), - PAD_CFG_NF(GPP_F4, NONE, DEEP, NF1), /* CNV_BRI_DT / CNVI_BRI_DT */ - PAD_CFG_NF(GPP_F5, UP_20K, DEEP, NF1), /* CNV_BRI_RSP / CNVI_BRI_RSP */ - PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1), /* CNV_RGI_DT / CNVI_RGI_DT */ - PAD_CFG_NF(GPP_F7, UP_20K, DEEP, NF1), /* CNV_RGI_RSP / CNVI_RGI_RSP */ - PAD_NC(GPP_F8, UP_20K), - PAD_NC(GPP_F9, UP_20K), - PAD_NC(GPP_F10, UP_20K), - PAD_NC(GPP_F11, UP_20K), - PAD_NC(GPP_F12, UP_20K), - PAD_NC(GPP_F13, UP_20K), - PAD_NC(GPP_F14, UP_20K), - PAD_NC(GPP_F15, UP_20K), - PAD_NC(GPP_F16, UP_20K), - PAD_NC(GPP_F17, UP_20K), - PAD_NC(GPP_F18, UP_20K), - PAD_NC(GPP_F19, UP_20K), - PAD_NC(GPP_F20, UP_20K), - PAD_NC(GPP_F21, UP_20K), - PAD_NC(GPP_F22, UP_20K), - PAD_NC(GPP_F23, NONE), - - /* ------- GPIO Group GPP_G ------- */ - PAD_NC(GPP_G0, UP_20K), - PAD_NC(GPP_G1, UP_20K), - PAD_NC(GPP_G2, UP_20K), - PAD_NC(GPP_G3, UP_20K), - PAD_NC(GPP_G4, UP_20K), - PAD_NC(GPP_G5, UP_20K), - PAD_NC(GPP_G6, UP_20K), - PAD_NC(GPP_G7, UP_20K), - - /* ------- GPIO Group GPP_H ------- */ - PAD_NC(GPP_H0, UP_20K), - PAD_CFG_NF(GPP_H1, NONE, DEEP, NF3), /* CNV_RF_RESET# / CNVI_RST# */ - PAD_CFG_NF(GPP_H2, DN_20K, DEEP, NF3), /* MODEM_CLKREQ / CNVI_CLKREQ */ - PAD_NC(GPP_H3, UP_20K), - PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), /* I2C2_SDA / SMD_7411 */ - PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), /* I2C2_SCL / SMC_7411 */ - PAD_NC(GPP_H6, UP_20K), - PAD_NC(GPP_H7, UP_20K), - PAD_NC(GPP_H8, UP_20K), - PAD_NC(GPP_H9, UP_20K), - PAD_NC(GPP_H10, UP_20K), - PAD_NC(GPP_H11, UP_20K), - PAD_NC(GPP_H12, UP_20K), - PAD_NC(GPP_H13, UP_20K), - PAD_NC(GPP_H14, UP_20K), - PAD_NC(GPP_H15, UP_20K), - PAD_NC(GPP_H16, UP_20K), - PAD_NC(GPP_H17, UP_20K), - PAD_CFG_NF(GPP_H18, NONE, DEEP, NF1), /* CPU_C10_GATE# */ - PAD_NC(GPP_H19, UP_20K), - PAD_NC(GPP_H20, UP_20K), - PAD_NC(GPP_H21, NONE), - PAD_NC(GPP_H22, UP_20K), - PAD_NC(GPP_H23, UP_20K), -}; - -#endif - -#endif diff --git a/src/mainboard/clevo/l140cu/variants/l140cu/hda_verb.c b/src/mainboard/clevo/l140cu/variants/l140cu/hda_verb.c deleted file mode 100644 index 7bb073698d..0000000000 --- a/src/mainboard/clevo/l140cu/variants/l140cu/hda_verb.c +++ /dev/null @@ -1,35 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include - -const u32 cim_verb_data[] = { - /* Realtek ALC293 */ - 0x10ec0293, /* Vendor ID */ - 0x15581401, /* Subsystem ID */ - 12, /* Number of entries */ - AZALIA_SUBVENDOR(0, 0x15581401), - AZALIA_PIN_CFG(0, 0x12, 0x90a60130), - AZALIA_PIN_CFG(0, 0x13, 0x40000000), - AZALIA_PIN_CFG(0, 0x14, 0x90170110), - AZALIA_PIN_CFG(0, 0x15, 0x02211020), - AZALIA_PIN_CFG(0, 0x16, 0x411111f0), - AZALIA_PIN_CFG(0, 0x18, 0x411111f0), - AZALIA_PIN_CFG(0, 0x19, 0x411111f0), - AZALIA_PIN_CFG(0, 0x1a, 0x01a1913c), - AZALIA_PIN_CFG(0, 0x1b, 0x411111f0), - AZALIA_PIN_CFG(0, 0x1d, 0x41748245), - AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), - - /* Intel GPU HDMI */ - 0x8086280b, /* Vendor ID */ - 0x80860101, /* Subsystem ID */ - 4, /* Number of entries */ - AZALIA_SUBVENDOR(2, 0x80860101), - AZALIA_PIN_CFG(2, 0x05, 0x18560010), - AZALIA_PIN_CFG(2, 0x06, 0x18560010), - AZALIA_PIN_CFG(2, 0x07, 0x18560010), -}; - -const u32 pc_beep_verbs[] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/clevo/l140cu/variants/l140cu/ramstage.c b/src/mainboard/clevo/l140cu/variants/l140cu/ramstage.c deleted file mode 100644 index 4b0ddd4823..0000000000 --- a/src/mainboard/clevo/l140cu/variants/l140cu/ramstage.c +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include -#include "gpio.h" - -void mainboard_silicon_init_params(FSP_S_CONFIG *params) -{ - /* Configure pads prior to SiliconInit() in case there's any - * dependencies during hardware initialization. */ - cnl_configure_pads(gpio_table, ARRAY_SIZE(gpio_table)); -} diff --git a/src/mainboard/clevo/l140cu/variants/l140cu/romstage.c b/src/mainboard/clevo/l140cu/variants/l140cu/romstage.c deleted file mode 100644 index 1af8ce6633..0000000000 --- a/src/mainboard/clevo/l140cu/variants/l140cu/romstage.c +++ /dev/null @@ -1,84 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include -#include - -static const struct cnl_mb_cfg memcfg = { - /* Parameters required to access SPD for CH0D0/CH0D1/CH1D0/CH1D1. */ - .spd[0] = { - .read_type = READ_SPD_CBFS, - .spd_spec = {.spd_index = 0}, - }, - .spd[1] = {.read_type = NOT_EXISTING}, - .spd[2] = { - .read_type = READ_SMBUS, - .spd_spec = {.spd_smbus_address = 0xa4}, - }, - .spd[3] = {.read_type = NOT_EXISTING}, - - /* - * For each channel, there are 3 sets of DQ byte mappings, - * where each set has a package 0 and a package 1 value (package 0 - * represents the first 64-bit lpddr4 chip combination, and package 1 - * represents the second 64-bit lpddr4 chip combination). - * The first three sets are for CLK, CMD, and CTL. - * The fsp package actually expects 6 sets, but the last 3 sets are - * not used in CNL, so we only define the three sets that are used - * and let the meminit_lpddr4() routine take care of clearing the - * unused fields for the caller. - */ - .dq_map[DDR_CH0] = { - {0x0F, 0xF0}, {0x00, 0xF0}, {0x0F, 0xF0}, - //{0x0F, 0x00}, {0xFF, 0x00}, {0xFF, 0x00} - }, - .dq_map[DDR_CH1] = { - {0x33, 0xCC}, {0x00, 0xCC}, {0x33, 0xCC}, - //{0x33, 0x00}, {0xFF, 0x00}, {0xFF, 0x00} - }, - - /* - * DQS CPU<>DRAM map Ch0 and Ch1. Each array entry represents a - * mapping of a dq bit on the CPU to the bit it's connected to on - * the memory part. The array index represents the dqs bit number - * on the memory part, and the values in the array represent which - * pin on the CPU that DRAM pin connects to. - */ - .dqs_map[DDR_CH0] = {0, 1, 2, 3, 4, 5, 6, 7}, - .dqs_map[DDR_CH1] = {1, 0, 2, 3, 4, 5, 6, 7}, - - /* - * Rcomp resistor values. These values represent the resistance in - * ohms of the three rcomp resistors attached to the DDR_COMP_0, - * DDR_COMP_1, and DDR_COMP_2 pins on the DRAM. - */ - .rcomp_resistor = { 121, 81, 100 }, - - /* - * Rcomp target values. These will typically be the following - * values for Cannon Lake : { 80, 40, 40, 40, 30 } - */ - .rcomp_targets = { 100, 40, 20, 20, 26 }, - - /* - * Indicates whether memory is interleaved. - * Set to 1 for an interleaved design, - * set to 0 for non-interleaved design. - */ - .dq_pins_interleaved = 1, - - /* - * VREF_CA configuration. - * Set to 0 VREF_CA goes to both CH_A and CH_B, - * set to 1 VREF_CA goes to CH_A and VREF_DQ_A goes to CH_B, - * set to 2 VREF_CA goes to CH_A and VREF_DQ_B goes to CH_B. - */ - .vref_ca_config = 2, - - /* Early Command Training */ - .ect = 0, -}; - -void mainboard_memory_init_params(FSPM_UPD *memupd) -{ - cannonlake_memcfg_init(&memupd->FspmConfig, &memcfg); -} -- cgit v1.2.3