From 399b6c11efaff64cb86a879dc9047a97538e790f Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Mon, 11 Nov 2019 19:12:57 +0100 Subject: sb/intel/i82801gx: Add common early code Remove some of the code duplication on i82801gx. x4x boards are left untouched for now since that northbridge also supports i82801jx. The order of some things has changed: - on i945 early_ich7_init is now done before the raminit - enabling the IOAPIC is done before the raminit Change-Id: Ie39549938891e17667a8819b49a78b9c71c8ec9e Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/c/coreboot/+/36754 Reviewed-by: Angel Pons Reviewed-by: HAOUAS Elyes Tested-by: build bot (Jenkins) --- src/mainboard/apple/macbook21/romstage.c | 36 +------------------ src/mainboard/asus/p5gc-mx/romstage.c | 37 +------------------- src/mainboard/getac/p470/romstage.c | 36 +------------------ src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c | 36 +------------------ src/mainboard/ibase/mb899/romstage.c | 36 +------------------ src/mainboard/intel/d945gclf/romstage.c | 36 +------------------ src/mainboard/kontron/986lcd-m/romstage.c | 37 +------------------- src/mainboard/lenovo/t60/romstage.c | 46 +++---------------------- src/mainboard/lenovo/x60/romstage.c | 41 ++-------------------- src/mainboard/roda/rk886ex/romstage.c | 36 +------------------ 10 files changed, 16 insertions(+), 361 deletions(-) (limited to 'src/mainboard') diff --git a/src/mainboard/apple/macbook21/romstage.c b/src/mainboard/apple/macbook21/romstage.c index aced71ce6a..41c0e9f384 100644 --- a/src/mainboard/apple/macbook21/romstage.c +++ b/src/mainboard/apple/macbook21/romstage.c @@ -48,9 +48,6 @@ static void rcba_config(void) RCBA16(D28IR) = 0x3201; RCBA16(D27IR) = 0x3216; - /* Enable IOAPIC */ - RCBA8(OIC) = 0x03; - /* Disable unused devices */ RCBA32(FD) |= FD_INTLAN; @@ -61,35 +58,6 @@ static void rcba_config(void) RCBA32(0x1e98) = 0x000c0801; } -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - /* program secondary mlt XXX byte? */ - pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); - - /* reset rtc power status */ - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - /* usb transient disconnect */ - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - ich7_setup_cir(); -} - void mainboard_romstage_entry(void) { int s3resume = 0; @@ -111,6 +79,7 @@ void mainboard_romstage_entry(void) /* Perform some early chipset initialization required * before RAM initialization can work */ + i82801gx_early_init(); i945_early_initialization(); s3resume = southbridge_detect_s3_resume(); @@ -123,9 +92,6 @@ void mainboard_romstage_entry(void) sdram_initialize(s3resume ? 2 : 0, spd_addrmap); - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - /* This should probably go away. Until now it is required * and mainboard specific */ diff --git a/src/mainboard/asus/p5gc-mx/romstage.c b/src/mainboard/asus/p5gc-mx/romstage.c index 3287b76416..0cc38a03e8 100644 --- a/src/mainboard/asus/p5gc-mx/romstage.c +++ b/src/mainboard/asus/p5gc-mx/romstage.c @@ -98,42 +98,9 @@ static u8 msr_get_fsb(void) static void rcba_config(void) { - /* Enable IOAPIC */ - RCBA8(OIC) = 0x03; - /* Enable PCIe Root Port Clock Gate */ RCBA32(CG) = 0x00000001; } - -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - // program secondary mlt XXX byte? - pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); - - // reset rtc power status - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - // usb transient disconnect - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - ich7_setup_cir(); -} - void mainboard_romstage_entry(void) { int s3resume = 0, boot_mode = 0; @@ -157,6 +124,7 @@ void mainboard_romstage_entry(void) /* Perform some early chipset initialization required * before RAM initialization can work */ + i82801gx_early_init(); i945_early_initialization(); s3resume = southbridge_detect_s3_resume(); @@ -179,9 +147,6 @@ void mainboard_romstage_entry(void) sdram_initialize(s3resume ? 2 : boot_mode, NULL); - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - /* This should probably go away. Until now it is required * and mainboard specific */ diff --git a/src/mainboard/getac/p470/romstage.c b/src/mainboard/getac/p470/romstage.c index e27194aab9..8c41190b02 100644 --- a/src/mainboard/getac/p470/romstage.c +++ b/src/mainboard/getac/p470/romstage.c @@ -143,9 +143,6 @@ static void rcba_config(void) RCBA16(D28IR) = 0x3201; RCBA16(D27IR) = 0x3216; - /* Enable IOAPIC */ - RCBA8(OIC) = 0x03; - /* Disable unused devices */ RCBA32(FD) |= FD_INTLAN; @@ -162,35 +159,6 @@ static void rcba_config(void) RCBA32(0x1e98) = 0x000c0801; } -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - // program secondary mlt XXX byte? - pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); - - // reset rtc power status - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - // usb transient disconnect - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - ich7_setup_cir(); -} - void mainboard_romstage_entry(void) { int s3resume = 0; @@ -211,6 +179,7 @@ void mainboard_romstage_entry(void) /* Perform some early chipset initialization required * before RAM initialization can work */ + i82801gx_early_init(); i945_early_initialization(); setup_special_ich7_gpios(); @@ -225,9 +194,6 @@ void mainboard_romstage_entry(void) sdram_initialize(s3resume ? 2 : 0, NULL); - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - /* This should probably go away. Until now it is required * and mainboard specific */ diff --git a/src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c b/src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c index 9a9e9473e6..cd1345148d 100644 --- a/src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c +++ b/src/mainboard/gigabyte/ga-945gcm-s2l/romstage.c @@ -58,42 +58,10 @@ static void setup_sio(void) static void rcba_config(void) { - /* Enable IOAPIC */ - RCBA8(OIC) = 0x03; - /* Enable PCIe Root Port Clock Gate */ RCBA32(CG) = 0x00000001; } -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - // program secondary mlt XXX byte? - pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); - - // reset rtc power status - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - // usb transient disconnect - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - ich7_setup_cir(); -} - void mainboard_romstage_entry(void) { int s3resume = 0, boot_mode = 0; @@ -118,6 +86,7 @@ void mainboard_romstage_entry(void) /* Perform some early chipset initialization required * before RAM initialization can work */ + i82801gx_early_init(); i945_early_initialization(); s3resume = southbridge_detect_s3_resume(); @@ -130,9 +99,6 @@ void mainboard_romstage_entry(void) sdram_initialize(s3resume ? 2 : boot_mode, NULL); - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - /* This should probably go away. Until now it is required * and mainboard specific */ diff --git a/src/mainboard/ibase/mb899/romstage.c b/src/mainboard/ibase/mb899/romstage.c index fd258af554..47e28a8dc1 100644 --- a/src/mainboard/ibase/mb899/romstage.c +++ b/src/mainboard/ibase/mb899/romstage.c @@ -120,42 +120,10 @@ static void rcba_config(void) RCBA16(D28IR) = 0x3201; RCBA16(D27IR) = 0x0146; - /* Enable IOAPIC */ - RCBA8(OIC) = 0x03; - /* Enable PCIe Root Port Clock Gate */ // RCBA32(0x341c) = 0x00000001; } -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - // program secondary mlt XXX byte? - pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); - - // reset rtc power status - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - // usb transient disconnect - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - ich7_setup_cir(); -} - void mainboard_romstage_entry(void) { int s3resume = 0; @@ -175,6 +143,7 @@ void mainboard_romstage_entry(void) /* Perform some early chipset initialization required * before RAM initialization can work */ + i82801gx_early_init(); i945_early_initialization(); s3resume = southbridge_detect_s3_resume(); @@ -187,9 +156,6 @@ void mainboard_romstage_entry(void) sdram_initialize(s3resume ? 2 : 0, NULL); - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - /* This should probably go away. Until now it is required * and mainboard specific */ diff --git a/src/mainboard/intel/d945gclf/romstage.c b/src/mainboard/intel/d945gclf/romstage.c index ba01379548..ada6e61c00 100644 --- a/src/mainboard/intel/d945gclf/romstage.c +++ b/src/mainboard/intel/d945gclf/romstage.c @@ -40,9 +40,6 @@ static void rcba_config(void) RCBA16(D28IR) = 0x3201; RCBA16(D27IR) = 0x0146; - /* Enable IOAPIC */ - RCBA8(OIC) = 0x03; - /* Disable unused devices */ RCBA32(FD) |= FD_INTLAN; @@ -50,35 +47,6 @@ static void rcba_config(void) // RCBA32(0x341c) = 0x00000001; } -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - // program secondary mlt XXX byte? - pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); - - // reset rtc power status - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - // usb transient disconnect - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - ich7_setup_cir(); -} - void mainboard_romstage_entry(void) { int s3resume = 0, boot_mode = 0; @@ -101,6 +69,7 @@ void mainboard_romstage_entry(void) /* Perform some early chipset initialization required * before RAM initialization can work */ + i82801gx_early_init(); i945_early_initialization(); s3resume = southbridge_detect_s3_resume(); @@ -113,9 +82,6 @@ void mainboard_romstage_entry(void) sdram_initialize(s3resume ? 2 : boot_mode, NULL); - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - /* This should probably go away. Until now it is required * and mainboard specific */ diff --git a/src/mainboard/kontron/986lcd-m/romstage.c b/src/mainboard/kontron/986lcd-m/romstage.c index cb01046010..d67a60b1e8 100644 --- a/src/mainboard/kontron/986lcd-m/romstage.c +++ b/src/mainboard/kontron/986lcd-m/romstage.c @@ -165,40 +165,7 @@ static void rcba_config(void) RCBA16(D28IR) = 0x3210; RCBA16(D27IR) = 0x3210; - /* Enable IOAPIC */ - RCBA8(OIC) = 0x03; - /* Enable PCIe Root Port Clock Gate */ - -} - -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - /* program secondary mlt XXX byte? */ - pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); - - /* reset rtc power status */ - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - /* usb transient disconnect */ - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - ich7_setup_cir(); } void mainboard_romstage_entry(void) @@ -221,6 +188,7 @@ void mainboard_romstage_entry(void) /* Perform some early chipset initialization required * before RAM initialization can work */ + i82801gx_early_init(); i945_early_initialization(); s3resume = southbridge_detect_s3_resume(); @@ -233,9 +201,6 @@ void mainboard_romstage_entry(void) sdram_initialize(s3resume ? 2 : 0, NULL); - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - /* This should probably go away. Until now it is required * and mainboard specific */ diff --git a/src/mainboard/lenovo/t60/romstage.c b/src/mainboard/lenovo/t60/romstage.c index ac78aae841..ab49e6e979 100644 --- a/src/mainboard/lenovo/t60/romstage.c +++ b/src/mainboard/lenovo/t60/romstage.c @@ -76,9 +76,6 @@ static void rcba_config(void) RCBA16(D28IR) = 0x7654; RCBA16(D27IR) = 0x0010; - /* Enable IOAPIC */ - RCBA8(OIC) = 0x03; - /* Disable unused devices */ RCBA32(FD) |= FD_INTLAN; @@ -89,35 +86,6 @@ static void rcba_config(void) RCBA64(IOTR3) = 0x000200f0000c0801ULL; } -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - // program secondary mlt XXX byte? - pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); - - // reset rtc power status - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - // usb transient disconnect - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - ich7_setup_cir(); -} - void mainboard_romstage_entry(void) { int s3resume = 0; @@ -126,15 +94,13 @@ void mainboard_romstage_entry(void) enable_lapic(); + /* Set up GPIO's early since it is needed for dock init */ + i82801gx_setup_bars(); + setup_pch_gpios(&mainboard_gpio_map); + i82801gx_lpc_setup(); mb_lpc_decode(); - /* We want early GPIO setup, to be able to detect legacy I/O module */ - pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1); - /* Enable GPIOs */ - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c /* GC */, 0x10); - setup_pch_gpios(&mainboard_gpio_map); - dock_err = dlpc_init(); /* We prefer Legacy I/O module over docking */ @@ -156,6 +122,7 @@ void mainboard_romstage_entry(void) /* Perform some early chipset initialization required * before RAM initialization can work */ + i82801gx_early_init(); i945_early_initialization(); s3resume = southbridge_detect_s3_resume(); @@ -168,9 +135,6 @@ void mainboard_romstage_entry(void) sdram_initialize(s3resume ? 2 : 0, spd_addrmap); - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - /* This should probably go away. Until now it is required * and mainboard specific */ diff --git a/src/mainboard/lenovo/x60/romstage.c b/src/mainboard/lenovo/x60/romstage.c index 1008bb0e22..6eeb2d12ba 100644 --- a/src/mainboard/lenovo/x60/romstage.c +++ b/src/mainboard/lenovo/x60/romstage.c @@ -77,9 +77,6 @@ static void rcba_config(void) RCBA16(D28IR) = 0x7654; RCBA16(D27IR) = 0x0010; - /* Enable IOAPIC */ - RCBA8(OIC) = 0x03; - /* Disable unused devices */ RCBA32(FD) |= FD_INTLAN; @@ -90,35 +87,6 @@ static void rcba_config(void) RCBA64(IOTR3) = 0x000200f0000c0801ULL; } -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - // program secondary mlt XXX byte? - pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); - - // reset rtc power status - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - // usb transient disconnect - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - ich7_setup_cir(); -} - void mainboard_romstage_entry(void) { int s3resume = 0; @@ -126,9 +94,8 @@ void mainboard_romstage_entry(void) enable_lapic(); - /* Enable GPIOs */ - pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c, 0x10); /* 0x4c == GC */ + /* Set up GPIO's early since it is needed for dock init */ + i82801gx_setup_bars(); setup_pch_gpios(&mainboard_gpio_map); i82801gx_lpc_setup(); @@ -161,6 +128,7 @@ void mainboard_romstage_entry(void) /* Perform some early chipset initialization required * before RAM initialization can work */ + i82801gx_early_init(); i945_early_initialization(); s3resume = southbridge_detect_s3_resume(); @@ -173,9 +141,6 @@ void mainboard_romstage_entry(void) sdram_initialize(s3resume ? 2 : 0, spd_addrmap); - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - /* This should probably go away. Until now it is required * and mainboard specific */ diff --git a/src/mainboard/roda/rk886ex/romstage.c b/src/mainboard/roda/rk886ex/romstage.c index 019ec1b733..f1a638dad1 100644 --- a/src/mainboard/roda/rk886ex/romstage.c +++ b/src/mainboard/roda/rk886ex/romstage.c @@ -108,9 +108,6 @@ static void rcba_config(void) RCBA16(D28IR) = 0x3201; RCBA16(D27IR) = 0x3216; - /* Enable IOAPIC */ - RCBA8(OIC) = 0x03; - /* Disable unused devices */ RCBA32(FD) |= FD_INTLAN; @@ -125,35 +122,6 @@ static void rcba_config(void) RCBA32(0x1e98) = 0x000c0801; } -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - /* program secondary mlt XXX byte? */ - pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); - - /* reset rtc power status */ - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - /* usb transient disconnect */ - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - ich7_setup_cir(); -} - static void init_artec_dongle(void) { /* Enable 4MB decoding */ @@ -181,6 +149,7 @@ void mainboard_romstage_entry(void) /* Perform some early chipset initialization required * before RAM initialization can work */ + i82801gx_early_init(); i945_early_initialization(); /* This has to happen after i945_early_initialization() */ @@ -196,9 +165,6 @@ void mainboard_romstage_entry(void) sdram_initialize(s3resume ? 2 : 0, NULL); - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - /* This should probably go away. Until now it is required * and mainboard specific */ -- cgit v1.2.3