From 2072296330b6a79b5a502361a44d64302ee671dd Mon Sep 17 00:00:00 2001 From: Tarun Tuli Date: Mon, 13 Feb 2023 16:41:36 +0000 Subject: mb/google/brya/agah: Adjust i2c1 and i2c2 timing Parameters for 400KHz Adjust timing parameters on i2c1 and i2c2 to meet timing requirements. For SCL, the t-high time is now over the min 600ns requirement for 400KHz operation (measure at over 700ns). Also, this change does not violate other parameters - rise time, setup time and hold time. BUG=b:264704732 TEST=Verified all timings meet spec now Change-Id: I0e92b2c9c25e7fb5fa7082af3f4a88da168c3ef2 Signed-off-by: Tarun Tuli Reviewed-on: https://review.coreboot.org/c/coreboot/+/72675 Tested-by: build bot (Jenkins) Reviewed-by: Eric Lai --- src/mainboard/google/brya/variants/agah/overridetree.cb | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'src/mainboard') diff --git a/src/mainboard/google/brya/variants/agah/overridetree.cb b/src/mainboard/google/brya/variants/agah/overridetree.cb index 53c60c17f3..52b9fcddbe 100644 --- a/src/mainboard/google/brya/variants/agah/overridetree.cb +++ b/src/mainboard/google/brya/variants/agah/overridetree.cb @@ -20,9 +20,15 @@ chip soc/intel/alderlake }, .i2c[1] = { .speed = I2C_SPEED_FAST, + .rise_time_ns = 650, + .fall_time_ns = 300, + .data_hold_time_ns = 50, }, .i2c[2] = { .speed = I2C_SPEED_FAST, + .rise_time_ns = 650, + .fall_time_ns = 300, + .data_hold_time_ns = 50, }, .i2c[3] = { .early_init = 1, -- cgit v1.2.3