From fcb2a311c765b9e1d519ed5fa2263d1bd5b33656 Mon Sep 17 00:00:00 2001 From: Aaron Lwe Date: Mon, 19 May 2008 12:17:43 +0000 Subject: Add support for the VIA EPIA-CN baord, which uses C7 + CN700 + VT8237R. This also contains various improvements of the CN700 code in svn. Signed-off-by: Aaron Lwe Acked-by: Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3334 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/via/epia-cn/Options.lb | 108 +++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) create mode 100644 src/mainboard/via/epia-cn/Options.lb (limited to 'src/mainboard/via/epia-cn/Options.lb') diff --git a/src/mainboard/via/epia-cn/Options.lb b/src/mainboard/via/epia-cn/Options.lb new file mode 100644 index 0000000000..fee1920a6c --- /dev/null +++ b/src/mainboard/via/epia-cn/Options.lb @@ -0,0 +1,108 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 VIA Technologies, Inc. +## (Written by Aaron Lwe for VIA) +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_HARD_RESET +uses HAVE_OPTION_TABLE +uses USE_OPTION_TABLE +uses CONFIG_ROM_PAYLOAD +uses IRQ_SLOT_COUNT +uses MAINBOARD +uses MAINBOARD_VENDOR +uses MAINBOARD_PART_NUMBER +uses COREBOOT_EXTRA_VERSION +uses ARCH +uses FALLBACK_SIZE +uses STACK_SIZE +uses HEAP_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_PAYLOAD_START +uses CONFIG_COMPRESSED_PAYLOAD_NRV2B +uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses PAYLOAD_SIZE +uses _ROMBASE +uses _RAMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses HAVE_MP_TABLE +uses HAVE_ACPI_TABLES +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_CONSOLE_SERIAL8250 +uses CONFIG_UDELAY_TSC +uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 +uses CONFIG_PCI_ROM_RUN +uses CONFIG_CONSOLE_VGA +uses CONFIG_MAX_PCI_BUSES +uses TTYS0_BAUD +uses CONFIG_CHIP_NAME +uses CONFIG_VIDEO_MB +uses CONFIG_IOAPIC + +default ROM_SIZE = 512 * 1024 +default CONFIG_IOAPIC = 0 +default CONFIG_VIDEO_MB = 32 +default CONFIG_CONSOLE_SERIAL8250 = 1 +default CONFIG_PCI_ROM_RUN = 0 +default CONFIG_CONSOLE_VGA = 0 +default CONFIG_CHIP_NAME = 1 +default HAVE_FALLBACK_BOOT = 1 +default HAVE_MP_TABLE = 0 +default CONFIG_UDELAY_TSC = 1 +default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 +default HAVE_HARD_RESET = 0 +default HAVE_PIRQ_TABLE = 1 +default IRQ_SLOT_COUNT = 10 +default HAVE_ACPI_TABLES = 0 +default HAVE_OPTION_TABLE = 1 +default ROM_IMAGE_SIZE = 64 * 1024 +default FALLBACK_SIZE = ROM_SIZE +default USE_FALLBACK_IMAGE = 1 +default STACK_SIZE = 8 * 1024 +default HEAP_SIZE = 16 * 1024 +#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default USE_OPTION_TABLE = 0 +default _RAMBASE = 0x00004000 +default CONFIG_ROM_PAYLOAD = 1 +default CROSS_COMPILE = "" +default CC = "$(CROSS_COMPILE)gcc -m32" +default HOSTCC = "gcc" + +## +## Set this to the max PCI bus number you would ever use for PCI config I/O. +## Setting this number very high will make pci_locate_device() take a long +## time when it can't find a device. +## +default CONFIG_MAX_PCI_BUSES = 3 + +end + -- cgit v1.2.3