From 14e22779625de673569c7b950ecc2753fb915b31 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Tue, 27 Apr 2010 06:56:47 +0000 Subject: Since some people disapprove of white space cleanups mixed in regular commits while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer Acked-by: Stefan Reinauer git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/tyan/Kconfig | 2 +- src/mainboard/tyan/s2735/Kconfig | 4 ++-- src/mainboard/tyan/s2735/cmos.layout | 4 ++-- src/mainboard/tyan/s2735/devicetree.cb | 6 +++--- src/mainboard/tyan/s2735/irq_tables.c | 2 +- src/mainboard/tyan/s2735/mptable.c | 8 ++++---- src/mainboard/tyan/s2735/romstage.c | 4 ++-- src/mainboard/tyan/s2850/devicetree.cb | 20 ++++++++++---------- src/mainboard/tyan/s2850/irq_tables.c | 2 +- src/mainboard/tyan/s2850/mptable.c | 14 +++++++------- src/mainboard/tyan/s2850/romstage.c | 6 +++--- src/mainboard/tyan/s2875/devicetree.cb | 12 ++++++------ src/mainboard/tyan/s2875/irq_tables.c | 2 +- src/mainboard/tyan/s2875/mptable.c | 16 ++++++++-------- src/mainboard/tyan/s2875/romstage.c | 4 ++-- src/mainboard/tyan/s2880/devicetree.cb | 12 ++++++------ src/mainboard/tyan/s2880/irq_tables.c | 4 ++-- src/mainboard/tyan/s2880/mptable.c | 22 +++++++++++----------- src/mainboard/tyan/s2880/romstage.c | 6 +++--- src/mainboard/tyan/s2881/devicetree.cb | 16 ++++++++-------- src/mainboard/tyan/s2881/get_bus_conf.c | 10 +++++----- src/mainboard/tyan/s2881/irq_tables.c | 20 ++++++++++---------- src/mainboard/tyan/s2881/mainboard.c | 2 +- src/mainboard/tyan/s2881/mptable.c | 10 +++++----- src/mainboard/tyan/s2881/resourcemap.c | 6 +++--- src/mainboard/tyan/s2881/romstage.c | 4 ++-- src/mainboard/tyan/s2882/devicetree.cb | 14 +++++++------- src/mainboard/tyan/s2882/irq_tables.c | 26 +++++++++++++------------- src/mainboard/tyan/s2882/mptable.c | 18 +++++++++--------- src/mainboard/tyan/s2882/romstage.c | 6 +++--- src/mainboard/tyan/s2885/devicetree.cb | 28 ++++++++++++++-------------- src/mainboard/tyan/s2885/get_bus_conf.c | 10 +++++----- src/mainboard/tyan/s2885/irq_tables.c | 22 +++++++++++----------- src/mainboard/tyan/s2885/mptable.c | 8 ++++---- src/mainboard/tyan/s2885/resourcemap.c | 6 +++--- src/mainboard/tyan/s2885/romstage.c | 8 ++++---- src/mainboard/tyan/s2891/resourcemap.c | 12 ++++++------ src/mainboard/tyan/s2892/dsdt.asl | 10 +++++----- src/mainboard/tyan/s2895/dsdt.asl | 10 +++++----- src/mainboard/tyan/s2912/Kconfig | 12 ++++++------ src/mainboard/tyan/s2912/ap_romstage.c | 2 +- src/mainboard/tyan/s2912/get_bus_conf.c | 4 ++-- src/mainboard/tyan/s2912/mb_sysconf.h | 2 +- src/mainboard/tyan/s2912_fam10/irq_tables.c | 18 +++++++++--------- src/mainboard/tyan/s2912_fam10/mb_sysconf.h | 2 +- src/mainboard/tyan/s4880/devicetree.cb | 8 ++++---- src/mainboard/tyan/s4880/irq_tables.c | 2 +- src/mainboard/tyan/s4880/mptable.c | 26 +++++++++++++------------- src/mainboard/tyan/s4880/resourcemap.c | 6 +++--- src/mainboard/tyan/s4880/romstage.c | 8 ++++---- src/mainboard/tyan/s4882/devicetree.cb | 20 ++++++++++---------- src/mainboard/tyan/s4882/irq_tables.c | 2 +- src/mainboard/tyan/s4882/mptable.c | 28 ++++++++++++++-------------- src/mainboard/tyan/s4882/resourcemap.c | 6 +++--- src/mainboard/tyan/s4882/romstage.c | 10 +++++----- 55 files changed, 276 insertions(+), 276 deletions(-) (limited to 'src/mainboard/tyan') diff --git a/src/mainboard/tyan/Kconfig b/src/mainboard/tyan/Kconfig index 93b6d9d4c2..cd9646b38c 100644 --- a/src/mainboard/tyan/Kconfig +++ b/src/mainboard/tyan/Kconfig @@ -21,7 +21,7 @@ choice prompt "Mainboard model" depends on VENDOR_TYAN - + source "src/mainboard/tyan/s1846/Kconfig" source "src/mainboard/tyan/s2735/Kconfig" source "src/mainboard/tyan/s2850/Kconfig" diff --git a/src/mainboard/tyan/s2735/Kconfig b/src/mainboard/tyan/s2735/Kconfig index a0f739c071..a387d1a4ba 100644 --- a/src/mainboard/tyan/s2735/Kconfig +++ b/src/mainboard/tyan/s2735/Kconfig @@ -26,12 +26,12 @@ config DCACHE_RAM_BASE hex default 0xcf000 depends on BOARD_TYAN_S2735 - + config DCACHE_RAM_SIZE hex default 0x1000 depends on BOARD_TYAN_S2735 - + config MAINBOARD_PART_NUMBER string default "S2735" diff --git a/src/mainboard/tyan/s2735/cmos.layout b/src/mainboard/tyan/s2735/cmos.layout index ccda70c808..608f02867c 100644 --- a/src/mainboard/tyan/s2735/cmos.layout +++ b/src/mainboard/tyan/s2735/cmos.layout @@ -30,8 +30,8 @@ entries 388 4 r 0 reboot_bits 392 3 e 5 baud_rate 395 1 e 2 hyper_threading -396 1 e 1 thermal_monitoring -397 1 e 1 remap_memory_high +396 1 e 1 thermal_monitoring +397 1 e 1 remap_memory_high 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first diff --git a/src/mainboard/tyan/s2735/devicetree.cb b/src/mainboard/tyan/s2735/devicetree.cb index 8ad5e0ecac..1e8b12a790 100644 --- a/src/mainboard/tyan/s2735/devicetree.cb +++ b/src/mainboard/tyan/s2735/devicetree.cb @@ -5,7 +5,7 @@ chip northbridge/intel/e7501 device pci 2.0 on chip southbridge/intel/i82870 device pci 1c.0 on end - device pci 1d.0 on + device pci 1d.0 on device pci 1.0 on end # intel lan device pci 1.1 on end end @@ -20,7 +20,7 @@ chip northbridge/intel/e7501 device pci 1d.2 on end device pci 1d.3 on end device pci 1d.7 on end - device pci 1e.0 on + device pci 1e.0 on device pci 1.0 on end # intel lan 10/100 device pci 2.0 on end # ati end @@ -56,7 +56,7 @@ chip northbridge/intel/e7501 io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI diff --git a/src/mainboard/tyan/s2735/irq_tables.c b/src/mainboard/tyan/s2735/irq_tables.c index 4f6eb306dc..036b8d0cb0 100644 --- a/src/mainboard/tyan/s2735/irq_tables.c +++ b/src/mainboard/tyan/s2735/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up diff --git a/src/mainboard/tyan/s2735/mptable.c b/src/mainboard/tyan/s2735/mptable.c index 6a73c6dc88..cde5c4e3b4 100644 --- a/src/mainboard/tyan/s2735/mptable.c +++ b/src/mainboard/tyan/s2735/mptable.c @@ -48,18 +48,18 @@ static void *smp_write_config_table(void *v) res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, 0x09, 0x20, res->base); - } + } } dev = dev_find_slot(1, PCI_DEVFN(0x1c,0)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, 0x0a, 0x20, res->base); - } + } } } /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# -*/ +*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x0, 0x8, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x1, 0x8, 0x1); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x0, 0x8, 0x2); @@ -149,7 +149,7 @@ Compatibility Bus Address predefined range: 0x00000000-- Compatibility Bus Address bus ID: 0 address modifier: add - predefined range: 0x00000001 // There is no extension information... + predefined range: 0x00000001 // There is no extension information... */ /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); diff --git a/src/mainboard/tyan/s2735/romstage.c b/src/mainboard/tyan/s2735/romstage.c index f581de431e..de3124cb90 100644 --- a/src/mainboard/tyan/s2735/romstage.c +++ b/src/mainboard/tyan/s2735/romstage.c @@ -1,4 +1,4 @@ - + #include #include #include @@ -50,7 +50,7 @@ void main(unsigned long bist) .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 }, }, }; - + if (bist == 0) { enable_lapic(); } diff --git a/src/mainboard/tyan/s2850/devicetree.cb b/src/mainboard/tyan/s2850/devicetree.cb index 264f8c7df6..98e6a28746 100644 --- a/src/mainboard/tyan/s2850/devicetree.cb +++ b/src/mainboard/tyan/s2850/devicetree.cb @@ -1,9 +1,9 @@ chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_940 - device apic 0 on end - end - end + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end device pci_domain 0 on chip northbridge/amd/amdk8 device pci 18.0 on # LDT0 @@ -51,7 +51,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -63,7 +63,7 @@ chip northbridge/amd/amdk8/root_complex end device pci 1.1 on end device pci 1.2 on end - device pci 1.3 on + device pci 1.3 on chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end @@ -82,14 +82,14 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 + end # device pci 18.0 device pci 18.0 on end device pci 18.0 on end - + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end - end + end end diff --git a/src/mainboard/tyan/s2850/irq_tables.c b/src/mainboard/tyan/s2850/irq_tables.c index 8c7e681ec2..d1179dcfae 100644 --- a/src/mainboard/tyan/s2850/irq_tables.c +++ b/src/mainboard/tyan/s2850/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up diff --git a/src/mainboard/tyan/s2850/mptable.c b/src/mainboard/tyan/s2850/mptable.c index 0d4d6f9bc1..51c060126f 100644 --- a/src/mainboard/tyan/s2850/mptable.c +++ b/src/mainboard/tyan/s2850/mptable.c @@ -29,7 +29,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -90,8 +90,8 @@ static void *smp_write_config_table(void *v) bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; - } - else { + } + else { printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8111_1 = 2; @@ -110,12 +110,12 @@ static void *smp_write_config_table(void *v) #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(1); #else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; + apicid_8111 = apicid_base+0; smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); @@ -133,7 +133,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (2<<2)|3, apicid_8111, 0x13); - + //On Board AMD USB smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); diff --git a/src/mainboard/tyan/s2850/romstage.c b/src/mainboard/tyan/s2850/romstage.c index 6fbafa90cb..4e75e36832 100644 --- a/src/mainboard/tyan/s2850/romstage.c +++ b/src/mainboard/tyan/s2850/romstage.c @@ -1,4 +1,4 @@ - + #include #include #include @@ -114,7 +114,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } // post_code(0x32); - + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); @@ -125,7 +125,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_default_resource_map(); needs_reset = setup_coherent_ht_domain(); - + #if CONFIG_LOGICAL_CPUS==1 // It is said that we should start core1 after all core0 launched start_other_cores(); diff --git a/src/mainboard/tyan/s2875/devicetree.cb b/src/mainboard/tyan/s2875/devicetree.cb index badb881777..edd4f6f784 100644 --- a/src/mainboard/tyan/s2875/devicetree.cb +++ b/src/mainboard/tyan/s2875/devicetree.cb @@ -6,7 +6,7 @@ chip northbridge/amd/amdk8/root_complex end device pci_domain 0 on chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 0, link 0 == LDT 0 chip southbridge/amd/amd8151 # the on/off keyword is mandatory @@ -55,7 +55,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -73,15 +73,15 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.0 on end device pci 18.0 on end - + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end - end + end end diff --git a/src/mainboard/tyan/s2875/irq_tables.c b/src/mainboard/tyan/s2875/irq_tables.c index db30d686c8..d08aa6ca09 100644 --- a/src/mainboard/tyan/s2875/irq_tables.c +++ b/src/mainboard/tyan/s2875/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up diff --git a/src/mainboard/tyan/s2875/mptable.c b/src/mainboard/tyan/s2875/mptable.c index 77afde6abf..c2a7012f13 100644 --- a/src/mainboard/tyan/s2875/mptable.c +++ b/src/mainboard/tyan/s2875/mptable.c @@ -28,7 +28,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -104,15 +104,15 @@ static void *smp_write_config_table(void *v) if (dev) { bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151_1); - + } else { printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8151_1 = 2; } - - + + } /*Bus: Bus ID Type*/ @@ -126,11 +126,11 @@ static void *smp_write_config_table(void *v) #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(1); #else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; + apicid_8111 = apicid_base+0; smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -156,7 +156,7 @@ static void *smp_write_config_table(void *v) // AGP Display Adapter smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, apicid_8111, 0x10); -// Onboard Serial ATA +// Onboard Serial ATA smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x05<<2)|0, apicid_8111, 0x13); //Onboard Firewire smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|0, apicid_8111, 0x11); diff --git a/src/mainboard/tyan/s2875/romstage.c b/src/mainboard/tyan/s2875/romstage.c index 274f8dc7ca..ead3655fae 100644 --- a/src/mainboard/tyan/s2875/romstage.c +++ b/src/mainboard/tyan/s2875/romstage.c @@ -1,4 +1,4 @@ - + #include #include #include @@ -135,7 +135,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_default_resource_map(); needs_reset = setup_coherent_ht_domain(); - + #if CONFIG_LOGICAL_CPUS==1 // It is said that we should start core1 after all core0 launched start_other_cores(); diff --git a/src/mainboard/tyan/s2880/devicetree.cb b/src/mainboard/tyan/s2880/devicetree.cb index 122648e137..97dcae866a 100644 --- a/src/mainboard/tyan/s2880/devicetree.cb +++ b/src/mainboard/tyan/s2880/devicetree.cb @@ -6,7 +6,7 @@ chip northbridge/amd/amdk8/root_complex end device pci_domain 0 on chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 0, link 0 == LDT 0 chip southbridge/amd/amd8131 # the on/off keyword is mandatory @@ -66,7 +66,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -84,15 +84,15 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.0 on end device pci 18.0 on end - + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end - end + end end diff --git a/src/mainboard/tyan/s2880/irq_tables.c b/src/mainboard/tyan/s2880/irq_tables.c index 78c12016b4..19149df142 100644 --- a/src/mainboard/tyan/s2880/irq_tables.c +++ b/src/mainboard/tyan/s2880/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -37,5 +37,5 @@ const struct irq_routing_table intel_irq_routing_table = { }; unsigned long write_pirq_routing_table(unsigned long addr) { - return copy_pirq_routing_table(addr); + return copy_pirq_routing_table(addr); } diff --git a/src/mainboard/tyan/s2880/mptable.c b/src/mainboard/tyan/s2880/mptable.c index a8f3859d7b..94a150b031 100644 --- a/src/mainboard/tyan/s2880/mptable.c +++ b/src/mainboard/tyan/s2880/mptable.c @@ -29,7 +29,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -60,7 +60,7 @@ static void *smp_write_config_table(void *v) unsigned apicid_8111; unsigned apicid_8131_1; unsigned apicid_8131_2; - + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -89,14 +89,14 @@ static void *smp_write_config_table(void *v) printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } - + /* 8111 */ dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); if (dev) { bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } + bus_isa++; + } else { printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); @@ -134,14 +134,14 @@ static void *smp_write_config_table(void *v) } smp_write_bus(mc, bus_isa, "ISA "); - + /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); #else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; + apicid_8111 = apicid_base+0; apicid_8131_1 = apicid_base+1; apicid_8131_2 = apicid_base+2; smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); @@ -165,7 +165,7 @@ static void *smp_write_config_table(void *v) } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -179,7 +179,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); - + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13); @@ -205,7 +205,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|2, apicid_8131_1, 0x1);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|3, apicid_8131_1, 0x2);// -//Slot 4 PCIX 100/66 +//Slot 4 PCIX 100/66 smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|0, apicid_8131_1, 0x2); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|1, apicid_8131_1, 0x3);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|2, apicid_8131_1, 0x0);// diff --git a/src/mainboard/tyan/s2880/romstage.c b/src/mainboard/tyan/s2880/romstage.c index 7c0e4f2a2c..f75c541b9c 100644 --- a/src/mainboard/tyan/s2880/romstage.c +++ b/src/mainboard/tyan/s2880/romstage.c @@ -1,4 +1,4 @@ - + #include #include #include @@ -125,7 +125,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) init_cpus(cpu_init_detectedx); } - + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); @@ -136,7 +136,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_default_resource_map(); needs_reset = setup_coherent_ht_domain(); - + #if CONFIG_LOGICAL_CPUS==1 // It is said that we should start core1 after all core0 launched start_other_cores(); diff --git a/src/mainboard/tyan/s2881/devicetree.cb b/src/mainboard/tyan/s2881/devicetree.cb index 3c1f5bc276..47b5d37775 100644 --- a/src/mainboard/tyan/s2881/devicetree.cb +++ b/src/mainboard/tyan/s2881/devicetree.cb @@ -8,11 +8,11 @@ chip northbridge/amd/amdk8/root_complex chip northbridge/amd/amdk8 device pci 18.0 on end # LDT0 device pci 18.0 on end # LDT1 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 2, link 2 == LDT 2 chip southbridge/amd/amd8131 # the on/off keyword is mandatory - device pci 0.0 on + device pci 0.0 on device pci 9.0 on end # Broadcom 5704 device pci 9.1 on end device pci a.0 on end # Adaptic @@ -65,7 +65,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -77,13 +77,13 @@ chip northbridge/amd/amdk8/root_complex end device pci 1.1 on end device pci 1.2 on end - device pci 1.3 on + device pci 1.3 on chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end chip drivers/generic/generic #dimm 0-0-1 device i2c 51 on end - end + end chip drivers/generic/generic #dimm 0-1-0 device i2c 52 on end end @@ -120,12 +120,12 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end - end + end end diff --git a/src/mainboard/tyan/s2881/get_bus_conf.c b/src/mainboard/tyan/s2881/get_bus_conf.c index 758e3d809d..562ba935d8 100644 --- a/src/mainboard/tyan/s2881/get_bus_conf.c +++ b/src/mainboard/tyan/s2881/get_bus_conf.c @@ -23,7 +23,7 @@ unsigned apicid_8111 ; unsigned apicid_8131_1; unsigned apicid_8131_2; -unsigned pci1234x[] = +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000ff0, @@ -35,7 +35,7 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, // 0x20202020, @@ -71,7 +71,7 @@ void get_bus_conf(void) } get_sblk_pci1234(); - + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; sbdn3 = sysconf.hcdn[0] & 0xff; @@ -119,8 +119,8 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif apicid_8111 = apicid_base+0; apicid_8131_1 = apicid_base+1; diff --git a/src/mainboard/tyan/s2881/irq_tables.c b/src/mainboard/tyan/s2881/irq_tables.c index af66ba9730..b53a9923a7 100644 --- a/src/mainboard/tyan/s2881/irq_tables.c +++ b/src/mainboard/tyan/s2881/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -12,11 +12,11 @@ #include -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; + pirq_info->bus = bus; pirq_info->devfn = devfn; pirq_info->irq[0].link = link0; pirq_info->irq[0].bitmap = bitmap0; @@ -62,22 +62,22 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq = (void *)(addr); v = (uint8_t *)(addr); - + pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - + pirq->rtr_bus = bus_8111_0; pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0; pirq->exclusive_irqs = 0; - + pirq->rtr_vendor = 0x1022; pirq->rtr_device = 0x746b; pirq->miniport_data = 0; memset(pirq->rfu, 0, sizeof(pirq->rfu)); - + pirq_info = (void *) ( &pirq->checksum + 1); slot_num = 0; //pci bridge @@ -88,11 +88,11 @@ unsigned long write_pirq_routing_table(unsigned long addr) // pirq_info++; slot_num++; pirq_info++; slot_num++; - - pirq->size = 32 + 16 * slot_num; + + pirq->size = 32 + 16 * slot_num; for (i = 0; i < pirq->size; i++) - sum += v[i]; + sum += v[i]; sum = pirq->checksum - sum; diff --git a/src/mainboard/tyan/s2881/mainboard.c b/src/mainboard/tyan/s2881/mainboard.c index 5866577ce4..773f2540a4 100644 --- a/src/mainboard/tyan/s2881/mainboard.c +++ b/src/mainboard/tyan/s2881/mainboard.c @@ -59,7 +59,7 @@ static void adt7463_init(device_t dev) result = smbus_write_byte(adt7463, 0x5e, 0xc2); /* Make sure that our fans never stop when temp. falls below Tmin, - * but rather keep going at minimum duty cycle (applies to automatic + * but rather keep going at minimum duty cycle (applies to automatic * fan control mode only). */ result = smbus_write_byte(adt7463, 0x62, 0xc0); diff --git a/src/mainboard/tyan/s2881/mptable.c b/src/mainboard/tyan/s2881/mptable.c index ca75c51a93..a51384c641 100644 --- a/src/mainboard/tyan/s2881/mptable.c +++ b/src/mainboard/tyan/s2881/mptable.c @@ -30,7 +30,7 @@ static void *smp_write_config_table(void *v) unsigned char bus_num; int i; - + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -51,7 +51,7 @@ static void *smp_write_config_table(void *v) smp_write_processors(mc); get_bus_conf(); - + /*Bus: Bus ID Type*/ /* define bus and isa numbers */ @@ -60,7 +60,7 @@ static void *smp_write_config_table(void *v) } smp_write_bus(mc, bus_isa, "ISA "); - + /*I/O APICs: APIC ID Version State Address*/ smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); { @@ -82,7 +82,7 @@ static void *smp_write_config_table(void *v) } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -96,7 +96,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); - + //8111 LPC ???? smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|0, apicid_8111, 0x13); diff --git a/src/mainboard/tyan/s2881/resourcemap.c b/src/mainboard/tyan/s2881/resourcemap.c index cecb790795..23ab936a5b 100644 --- a/src/mainboard/tyan/s2881/resourcemap.c +++ b/src/mainboard/tyan/s2881/resourcemap.c @@ -144,7 +144,7 @@ static void setup_s2881_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, @@ -200,7 +200,7 @@ static void setup_s2881_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -208,7 +208,7 @@ static void setup_s2881_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, diff --git a/src/mainboard/tyan/s2881/romstage.c b/src/mainboard/tyan/s2881/romstage.c index 1310c8e99b..0a63486ffb 100644 --- a/src/mainboard/tyan/s2881/romstage.c +++ b/src/mainboard/tyan/s2881/romstage.c @@ -3,7 +3,7 @@ #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 #endif - + #include #include #include @@ -117,7 +117,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } // post_code(0x32); - + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); diff --git a/src/mainboard/tyan/s2882/devicetree.cb b/src/mainboard/tyan/s2882/devicetree.cb index d563232b2d..b8cbce2858 100644 --- a/src/mainboard/tyan/s2882/devicetree.cb +++ b/src/mainboard/tyan/s2882/devicetree.cb @@ -7,7 +7,7 @@ chip northbridge/amd/amdk8/root_complex device pci_domain 0 on chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 0, link 0 == LDT 0 chip southbridge/amd/amd8131 # the on/off keyword is mandatory @@ -67,7 +67,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -80,13 +80,13 @@ chip northbridge/amd/amdk8/root_complex device pci 1.1 on end device pci 1.2 on end device pci 1.3 on end - device pci 1.3 on + device pci 1.3 on # chip drivers/generic/generic #dimm 0-0-0 # device i2c 50 on end # end # chip drivers/generic/generic #dimm 0-0-1 # device i2c 51 on end -# end +# end # chip drivers/generic/generic #dimm 0-1-0 # device i2c 52 on end # end @@ -111,11 +111,11 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.0 on end device pci 18.0 on end - + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end diff --git a/src/mainboard/tyan/s2882/irq_tables.c b/src/mainboard/tyan/s2882/irq_tables.c index 3107ac8a87..4ddd63eecb 100644 --- a/src/mainboard/tyan/s2882/irq_tables.c +++ b/src/mainboard/tyan/s2882/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -63,7 +63,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -76,11 +76,11 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) return 0; } -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; + pirq_info->bus = bus; pirq_info->devfn = devfn; pirq_info->irq[0].link = link0; pirq_info->irq[0].bitmap = bitmap0; @@ -162,15 +162,15 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq = (void *)(addr); v = (uint8_t *)(addr); - + pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - + pirq->rtr_bus = bus_chain_0; pirq->rtr_devfn = (4<<3)|3; pirq->exclusive_irqs = 0; - + pirq->rtr_vendor = 0x1022; pirq->rtr_device = 0x746b; @@ -186,7 +186,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x04,3)); if (dev) { /* initialize PCI interupts - these assignments depend - on the PCB routing of PINTA-D + on the PCB routing of PINTA-D PINTA = IRQ5 PINTB = IRQ9 @@ -202,7 +202,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pci_assign_irqs(bus_chain_0, 4, slotIrqs_1_4); write_pirq_info(pirq_info, bus_chain_0,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - + printk(BIOS_DEBUG, "setting Onboard AMD USB \n"); static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 10 }; pci_assign_irqs(bus_8111_1, 0, slotIrqs_8111_1_0); @@ -279,16 +279,16 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq_info++; slot_num++; #endif -#if 0 +#if 0 //?? what's this? write_pirq_info(pirq_info, bus_8131_2,(5<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x7, 0); pirq_info++; slot_num++; #endif - - pirq->size = 32 + 16 * slot_num; + + pirq->size = 32 + 16 * slot_num; for (i = 0; i < pirq->size; i++) - sum += v[i]; + sum += v[i]; sum = pirq->checksum - sum; diff --git a/src/mainboard/tyan/s2882/mptable.c b/src/mainboard/tyan/s2882/mptable.c index f1d7a27179..43ccef6276 100644 --- a/src/mainboard/tyan/s2882/mptable.c +++ b/src/mainboard/tyan/s2882/mptable.c @@ -30,7 +30,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -60,7 +60,7 @@ static void *smp_write_config_table(void *v) unsigned apicid_8111; unsigned apicid_8131_1; unsigned apicid_8131_2; - + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -95,8 +95,8 @@ static void *smp_write_config_table(void *v) bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; - } - else { + } + else { printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; @@ -137,9 +137,9 @@ static void *smp_write_config_table(void *v) #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); #else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; + apicid_8111 = apicid_base+0; apicid_8131_1 = apicid_base+1; apicid_8131_2 = apicid_base+2; @@ -163,7 +163,7 @@ static void *smp_write_config_table(void *v) } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -180,7 +180,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|3, apicid_8111, 0x13); - + //On Board AMD USB smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); @@ -209,7 +209,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);// -//Slot 4 PCIX 100/66 +//Slot 4 PCIX 100/66 smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);// diff --git a/src/mainboard/tyan/s2882/romstage.c b/src/mainboard/tyan/s2882/romstage.c index c49dff9f10..d8816d4cff 100644 --- a/src/mainboard/tyan/s2882/romstage.c +++ b/src/mainboard/tyan/s2882/romstage.c @@ -1,4 +1,4 @@ - + #include #include #include @@ -129,7 +129,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) init_cpus(cpu_init_detectedx); } - + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); @@ -140,7 +140,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_default_resource_map(); needs_reset = setup_coherent_ht_domain(); - + #if CONFIG_LOGICAL_CPUS==1 // It is said that we should start core1 after all core0 launched start_other_cores(); diff --git a/src/mainboard/tyan/s2885/devicetree.cb b/src/mainboard/tyan/s2885/devicetree.cb index f8dc2215d9..7cdc728fbb 100644 --- a/src/mainboard/tyan/s2885/devicetree.cb +++ b/src/mainboard/tyan/s2885/devicetree.cb @@ -14,11 +14,11 @@ chip northbridge/amd/amdk8/root_complex end end device pci 18.0 on end # LDT1 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 2, link 2 == LDT 2 chip southbridge/amd/amd8131 # the on/off keyword is mandatory - device pci 0.0 on + device pci 0.0 on device pci 9.0 on end # broadcom 5703 end device pci 0.1 on end @@ -67,7 +67,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -82,36 +82,36 @@ chip northbridge/amd/amdk8/root_complex device pci 1.3 on chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end - end + end chip drivers/generic/generic #dimm 0-0-1 device i2c 51 on end - end + end chip drivers/generic/generic #dimm 0-1-0 device i2c 52 on end - end + end chip drivers/generic/generic #dimm 0-1-1 device i2c 53 on end - end + end chip drivers/generic/generic #dimm 1-0-0 device i2c 54 on end - end + end chip drivers/generic/generic #dimm 1-0-1 device i2c 55 on end end chip drivers/generic/generic #dimm 1-1-0 device i2c 56 on end - end + end chip drivers/generic/generic #dimm 1-1-1 device i2c 57 on end - end + end end # acpi device pci 1.5 on end device pci 1.6 off end register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end @@ -119,9 +119,9 @@ chip northbridge/amd/amdk8/root_complex end #pci_domain -# chip drivers/generic/debug +# chip drivers/generic/debug # device pnp 0.0 off end -# device pnp 0.1 off end +# device pnp 0.1 off end # device pnp 0.2 off end # device pnp 0.3 off end # device pnp 0.4 off end diff --git a/src/mainboard/tyan/s2885/get_bus_conf.c b/src/mainboard/tyan/s2885/get_bus_conf.c index de4deb23d3..a511afa395 100644 --- a/src/mainboard/tyan/s2885/get_bus_conf.c +++ b/src/mainboard/tyan/s2885/get_bus_conf.c @@ -24,7 +24,7 @@ unsigned apicid_8111 ; unsigned apicid_8131_1; unsigned apicid_8131_2; -unsigned pci1234x[] = +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000ff0, @@ -36,7 +36,7 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, @@ -73,7 +73,7 @@ void get_bus_conf(void) } get_sblk_pci1234(); - + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; sbdn3 = sysconf.hcdn[0] & 0xff; sbdn5 = sysconf.hcdn[1] & 0xff; @@ -135,8 +135,8 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif apicid_8111 = apicid_base+0; apicid_8131_1 = apicid_base+1; diff --git a/src/mainboard/tyan/s2885/irq_tables.c b/src/mainboard/tyan/s2885/irq_tables.c index f9a358e125..b272fda532 100644 --- a/src/mainboard/tyan/s2885/irq_tables.c +++ b/src/mainboard/tyan/s2885/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -12,11 +12,11 @@ #include -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; + pirq_info->bus = bus; pirq_info->devfn = devfn; pirq_info->irq[0].link = link0; pirq_info->irq[0].bitmap = bitmap0; @@ -65,22 +65,22 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq = (void *)(addr); v = (uint8_t *)(addr); - + pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - + pirq->rtr_bus = bus_8111_0; pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0; pirq->exclusive_irqs = 0; - + pirq->rtr_vendor = 0x1022; pirq->rtr_device = 0x746b; pirq->miniport_data = 0; memset(pirq->rfu, 0, sizeof(pirq->rfu)); - + pirq_info = (void *) ( &pirq->checksum + 1); slot_num = 0; //pci bridge @@ -90,14 +90,14 @@ unsigned long write_pirq_routing_table(unsigned long addr) // write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); // pirq_info++; slot_num++; //agp bridge - write_pirq_info(pirq_info, bus_8151_0, (sbdn5<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + write_pirq_info(pirq_info, bus_8151_0, (sbdn5<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - - pirq->size = 32 + 16 * slot_num; + + pirq->size = 32 + 16 * slot_num; for (i = 0; i < pirq->size; i++) - sum += v[i]; + sum += v[i]; sum = pirq->checksum - sum; diff --git a/src/mainboard/tyan/s2885/mptable.c b/src/mainboard/tyan/s2885/mptable.c index d096b07905..87c812fb13 100644 --- a/src/mainboard/tyan/s2885/mptable.c +++ b/src/mainboard/tyan/s2885/mptable.c @@ -83,7 +83,7 @@ static void *smp_write_config_table(void *v) } } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -100,7 +100,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); //??? What smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|3, apicid_8111, 0x13); -//Onboard AMD AC97 Audio +//Onboard AMD AC97 Audio smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|1, apicid_8111, 0x11); // Onboard AMD USB smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); @@ -108,7 +108,7 @@ static void *smp_write_config_table(void *v) // AGP Display Adapter smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, apicid_8111, 0x10); -//Onboard Serial ATA +//Onboard Serial ATA smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, apicid_8111, 0x11); //Onboard Firewire smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0c<<2)|0, apicid_8111, 0x13); @@ -127,7 +127,7 @@ static void *smp_write_config_table(void *v) } -//Slot 4 PCIX 100/66 +//Slot 4 PCIX 100/66 for(i=0;i<4;i++) { smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|i, apicid_8131_1, (2+i)%4); //26 } diff --git a/src/mainboard/tyan/s2885/resourcemap.c b/src/mainboard/tyan/s2885/resourcemap.c index 4a686020c8..af0ccabeb8 100644 --- a/src/mainboard/tyan/s2885/resourcemap.c +++ b/src/mainboard/tyan/s2885/resourcemap.c @@ -144,7 +144,7 @@ static void setup_s2885_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, @@ -200,7 +200,7 @@ static void setup_s2885_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -208,7 +208,7 @@ static void setup_s2885_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ // PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, diff --git a/src/mainboard/tyan/s2885/romstage.c b/src/mainboard/tyan/s2885/romstage.c index 7513c14e1b..f7ea579f6e 100644 --- a/src/mainboard/tyan/s2885/romstage.c +++ b/src/mainboard/tyan/s2885/romstage.c @@ -1,4 +1,4 @@ - + #include #include #include @@ -71,7 +71,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "lib/generic_sdram.c" /* tyan does not want the default */ -#include "resourcemap.c" +#include "resourcemap.c" #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 @@ -119,13 +119,13 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } // post_code(0x32); - + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); // dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); - + /* Halt if there was a built in self test failure */ report_bist_failure(bist); diff --git a/src/mainboard/tyan/s2891/resourcemap.c b/src/mainboard/tyan/s2891/resourcemap.c index f7929b96c0..d76f1d6f47 100644 --- a/src/mainboard/tyan/s2891/resourcemap.c +++ b/src/mainboard/tyan/s2891/resourcemap.c @@ -144,7 +144,7 @@ static void setup_s2891_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, @@ -182,7 +182,7 @@ static void setup_s2891_resource_map(void) * [31:25] Reserved */ // PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, @@ -200,7 +200,7 @@ static void setup_s2891_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -208,7 +208,7 @@ static void setup_s2891_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ // PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, @@ -254,8 +254,8 @@ static void setup_s2891_resource_map(void) */ // PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */ // PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 */ - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, }; diff --git a/src/mainboard/tyan/s2892/dsdt.asl b/src/mainboard/tyan/s2892/dsdt.asl index 63a94bb932..d4242c3dc2 100644 --- a/src/mainboard/tyan/s2892/dsdt.asl +++ b/src/mainboard/tyan/s2892/dsdt.asl @@ -6,22 +6,22 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * + * the Free Software Foundation; version 2 of the License. + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + /* * ISA portions taken from QEMU acpi-dsdt.dsl. */ - + DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1) { #include "northbridge/amd/amdk8/amdk8_util.asl" diff --git a/src/mainboard/tyan/s2895/dsdt.asl b/src/mainboard/tyan/s2895/dsdt.asl index 268929fd9d..b3ac536d28 100644 --- a/src/mainboard/tyan/s2895/dsdt.asl +++ b/src/mainboard/tyan/s2895/dsdt.asl @@ -6,22 +6,22 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * + * the Free Software Foundation; version 2 of the License. + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + /* * ISA portions taken from QEMU acpi-dsdt.dsl. */ - + DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1) { #include "northbridge/amd/amdk8/amdk8_util.asl" diff --git a/src/mainboard/tyan/s2912/Kconfig b/src/mainboard/tyan/s2912/Kconfig index 18fa5e2bc3..c2a7ed00dd 100644 --- a/src/mainboard/tyan/s2912/Kconfig +++ b/src/mainboard/tyan/s2912/Kconfig @@ -15,7 +15,7 @@ config BOARD_TYAN_S2912 select LIFT_BSP_APIC_ID select K8_REV_F_SUPPORT select BOARD_ROMSIZE_KB_512 - + config MAINBOARD_DIR string default tyan/s2912 @@ -25,7 +25,7 @@ config DCACHE_RAM_BASE hex default 0xc8000 depends on BOARD_TYAN_S2912 - + config DCACHE_RAM_SIZE hex default 0x08000 @@ -37,7 +37,7 @@ config DCACHE_RAM_GLOBAL_VAR_SIZE depends on BOARD_TYAN_S2912 config APIC_ID_OFFSET - hex + hex default 0x10 depends on BOARD_TYAN_S2912 @@ -77,7 +77,7 @@ config MAX_PHYSICAL_CPUS depends on BOARD_TYAN_S2912 config HW_MEM_HOLE_SIZE_AUTO_INC - bool + bool default n depends on BOARD_TYAN_S2912 @@ -87,12 +87,12 @@ config HT_CHAIN_UNITID_BASE depends on BOARD_TYAN_S2912 config HT_CHAIN_END_UNITID_BASE - hex + hex default 0x20 depends on BOARD_TYAN_S2912 config SERIAL_CPU_INIT - bool + bool default n depends on BOARD_TYAN_S2912 diff --git a/src/mainboard/tyan/s2912/ap_romstage.c b/src/mainboard/tyan/s2912/ap_romstage.c index a477b6891d..41a4a6ee8d 100644 --- a/src/mainboard/tyan/s2912/ap_romstage.c +++ b/src/mainboard/tyan/s2912/ap_romstage.c @@ -25,7 +25,7 @@ #define RAMINIT_SYSINFO 1 #define CACHE_AS_RAM_ADDRESS_DEBUG 0 -#define SET_NB_CFG_54 1 +#define SET_NB_CFG_54 1 //used by raminit #define QRANK_DIMM_SUPPORT 1 diff --git a/src/mainboard/tyan/s2912/get_bus_conf.c b/src/mainboard/tyan/s2912/get_bus_conf.c index b21b1af4a7..9ff59d24ab 100644 --- a/src/mainboard/tyan/s2912/get_bus_conf.c +++ b/src/mainboard/tyan/s2912/get_bus_conf.c @@ -35,7 +35,7 @@ struct mb_sysconf_t mb_sysconf; unsigned pci1234x[] = -{ +{ // Here you only need to set value in pci1234 for HT-IO that could be // installed or not. // You may need to preset pci1234 for HTIO board, please refer to @@ -50,7 +50,7 @@ unsigned pci1234x[] = // 0x0000ff0 }; unsigned hcdnx[] = -{ +{ // HT Chain device num, actually it is unit id base of every ht device // in chain, assume every chain only have 4 ht device at most 0x20202020, diff --git a/src/mainboard/tyan/s2912/mb_sysconf.h b/src/mainboard/tyan/s2912/mb_sysconf.h index 83f9dbab28..a2e6fc7ade 100644 --- a/src/mainboard/tyan/s2912/mb_sysconf.h +++ b/src/mainboard/tyan/s2912/mb_sysconf.h @@ -26,7 +26,7 @@ struct mb_sysconf_t { unsigned char bus_isa; unsigned char bus_mcp55[8]; //1 unsigned apicid_mcp55; - unsigned bus_type[256]; + unsigned bus_type[256]; }; diff --git a/src/mainboard/tyan/s2912_fam10/irq_tables.c b/src/mainboard/tyan/s2912_fam10/irq_tables.c index bb14f3310b..a1de4c4f57 100644 --- a/src/mainboard/tyan/s2912_fam10/irq_tables.c +++ b/src/mainboard/tyan/s2912_fam10/irq_tables.c @@ -19,7 +19,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! * (but if you do, please run checkpir on it to verify) * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -34,11 +34,11 @@ #include #include "mb_sysconf.h" -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; + pirq_info->bus = bus; pirq_info->devfn = devfn; pirq_info->irq[0].link = link0; pirq_info->irq[0].bitmap = bitmap0; @@ -80,15 +80,15 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq = (void *)(addr); v = (uint8_t *)(addr); - + pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - + pirq->rtr_bus = m->bus_mcp55[0]; pirq->rtr_devfn = ((sbdn+6)<<3)|0; pirq->exclusive_irqs = 0; - + pirq->rtr_vendor = 0x10de; pirq->rtr_device = 0x0370; @@ -101,7 +101,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) //pci bridge write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - + for(i=1; i< sysconf.hc_possible_num; i++) { if(!(sysconf.pci1234[i] & 0x1) ) continue; unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; @@ -120,10 +120,10 @@ unsigned long write_pirq_routing_table(unsigned long addr) } #endif - pirq->size = 32 + 16 * slot_num; + pirq->size = 32 + 16 * slot_num; for (i = 0; i < pirq->size; i++) - sum += v[i]; + sum += v[i]; sum = pirq->checksum - sum; diff --git a/src/mainboard/tyan/s2912_fam10/mb_sysconf.h b/src/mainboard/tyan/s2912_fam10/mb_sysconf.h index 83f9dbab28..a2e6fc7ade 100644 --- a/src/mainboard/tyan/s2912_fam10/mb_sysconf.h +++ b/src/mainboard/tyan/s2912_fam10/mb_sysconf.h @@ -26,7 +26,7 @@ struct mb_sysconf_t { unsigned char bus_isa; unsigned char bus_mcp55[8]; //1 unsigned apicid_mcp55; - unsigned bus_type[256]; + unsigned bus_type[256]; }; diff --git a/src/mainboard/tyan/s4880/devicetree.cb b/src/mainboard/tyan/s4880/devicetree.cb index 4a08e45d1b..4c2f2b59f4 100644 --- a/src/mainboard/tyan/s4880/devicetree.cb +++ b/src/mainboard/tyan/s4880/devicetree.cb @@ -9,7 +9,7 @@ chip northbridge/amd/amdk8/root_complex chip northbridge/amd/amdk8 device pci 18.0 on end # LDT0 device pci 18.0 on end # LDT1 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 2, link 2 == LDT 2 chip southbridge/amd/amd8131 # the on/off keyword is mandatory @@ -68,7 +68,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -86,8 +86,8 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end diff --git a/src/mainboard/tyan/s4880/irq_tables.c b/src/mainboard/tyan/s4880/irq_tables.c index e95038dc37..352a7411e1 100644 --- a/src/mainboard/tyan/s4880/irq_tables.c +++ b/src/mainboard/tyan/s4880/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up diff --git a/src/mainboard/tyan/s4880/mptable.c b/src/mainboard/tyan/s4880/mptable.c index 746d2a5d5e..a5094ba042 100644 --- a/src/mainboard/tyan/s4880/mptable.c +++ b/src/mainboard/tyan/s4880/mptable.c @@ -28,7 +28,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -58,7 +58,7 @@ static void *smp_write_config_table(void *v) unsigned apicid_8111; unsigned apicid_8131_1; unsigned apicid_8131_2; - + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -78,7 +78,7 @@ static void *smp_write_config_table(void *v) smp_write_processors(mc); - + { device_t dev; @@ -88,14 +88,14 @@ static void *smp_write_config_table(void *v) printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } - + /* 8111 */ dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); if (dev) { bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } + bus_isa++; + } else { printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); @@ -133,14 +133,14 @@ static void *smp_write_config_table(void *v) } smp_write_bus(mc, bus_isa, "ISA "); - + /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; + apicid_8111 = apicid_base+0; apicid_8131_1 = apicid_base+1; apicid_8131_2 = apicid_base+2; @@ -164,7 +164,7 @@ static void *smp_write_config_table(void *v) } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -182,7 +182,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); - + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13); @@ -214,7 +214,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);// -//Slot 3 PCIX 100/66 +//Slot 3 PCIX 100/66 smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);// diff --git a/src/mainboard/tyan/s4880/resourcemap.c b/src/mainboard/tyan/s4880/resourcemap.c index cf45d55532..5fa85784ab 100644 --- a/src/mainboard/tyan/s4880/resourcemap.c +++ b/src/mainboard/tyan/s4880/resourcemap.c @@ -144,7 +144,7 @@ static void setup_s4880_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, @@ -200,7 +200,7 @@ static void setup_s4880_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -208,7 +208,7 @@ static void setup_s4880_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, diff --git a/src/mainboard/tyan/s4880/romstage.c b/src/mainboard/tyan/s4880/romstage.c index 9933303278..753328c062 100644 --- a/src/mainboard/tyan/s4880/romstage.c +++ b/src/mainboard/tyan/s4880/romstage.c @@ -1,4 +1,4 @@ - + #include #include #include @@ -65,7 +65,7 @@ static inline void change_i2c_mux(unsigned device) { #define SMBUS_HUB 0x18 int ret; - print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n"); + print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n"); ret = smbus_write_byte(SMBUS_HUB, 0x01, device); print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\n"); ret = smbus_write_byte(SMBUS_HUB, 0x03, 0); @@ -85,7 +85,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "lib/generic_sdram.c" /* tyan does not want the default */ -#include "resourcemap.c" +#include "resourcemap.c" #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 @@ -185,7 +185,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_s4880_resource_map(); needs_reset = setup_coherent_ht_domain(); - + #if CONFIG_LOGICAL_CPUS==1 // It is said that we should start core1 after all core0 launched start_other_cores(); diff --git a/src/mainboard/tyan/s4882/devicetree.cb b/src/mainboard/tyan/s4882/devicetree.cb index d2e5bbcf90..66f8c73e00 100644 --- a/src/mainboard/tyan/s4882/devicetree.cb +++ b/src/mainboard/tyan/s4882/devicetree.cb @@ -7,11 +7,11 @@ chip northbridge/amd/amdk8/root_complex device pci_domain 0 on chip northbridge/amd/amdk8 device pci 18.0 on end # LDT0 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 1, link 1 == LDT 1 chip southbridge/amd/amd8131 # the on/off keyword is mandatory - device pci 0.0 on + device pci 0.0 on # chip drivers/lsi/53c1030 # device pci 4.0 on end # device pci 4.1 on end @@ -69,7 +69,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -81,12 +81,12 @@ chip northbridge/amd/amdk8/root_complex end device pci 1.1 on end device pci 1.2 on end - device pci 1.3 on + device pci 1.3 on # chip drivers/i2c/i2cmux # pca9556 smbus mux # device i2c 18 on #0 pca9516 2, 1 # chip drivers/i2c/lm63 #cpu0 temp # device i2c 4c on end -# end +# end # end # device i2c 18 on #1 pca9516 1, 1 # chip drivers/generic/generic #dimm 1-0-0 @@ -163,7 +163,7 @@ chip northbridge/amd/amdk8/root_complex # chip drivers/i2c/adm1027 # ADM1027 CPU1 vid and System FAN... # device i2c 2e on end # end -# chip drivers/generic/generic # Winbond HWM 0x54 CPU0 vid +# chip drivers/generic/generic # Winbond HWM 0x54 CPU0 vid # device i2c 2a on end # end # chip drivers/generic/generic # Winbond HWM 0x92 @@ -181,16 +181,16 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.0 on end - + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end - end + end # chip drivers/generic/debug # device pnp 0.0 off end # chip name # device pnp 0.1 off end # pci_regs_all diff --git a/src/mainboard/tyan/s4882/irq_tables.c b/src/mainboard/tyan/s4882/irq_tables.c index 4552b1f69c..92695abf7b 100644 --- a/src/mainboard/tyan/s4882/irq_tables.c +++ b/src/mainboard/tyan/s4882/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up diff --git a/src/mainboard/tyan/s4882/mptable.c b/src/mainboard/tyan/s4882/mptable.c index 4022dbdde1..81364262b7 100644 --- a/src/mainboard/tyan/s4882/mptable.c +++ b/src/mainboard/tyan/s4882/mptable.c @@ -29,7 +29,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -59,7 +59,7 @@ static void *smp_write_config_table(void *v) unsigned apicid_8111; unsigned apicid_8131_1; unsigned apicid_8131_2; - + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -79,24 +79,24 @@ static void *smp_write_config_table(void *v) smp_write_processors(mc); - + { device_t dev; - + /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 1); if (bus_chain_0 == 0) { printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } - + /* 8111 */ dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); if (dev) { bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } + bus_isa++; + } else { printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); @@ -134,14 +134,14 @@ static void *smp_write_config_table(void *v) } smp_write_bus(mc, bus_isa, "ISA "); - + /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; + apicid_8111 = apicid_base+0; apicid_8131_1 = apicid_base+1; apicid_8131_2 = apicid_base+2; smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); @@ -164,7 +164,7 @@ static void *smp_write_config_table(void *v) } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -182,7 +182,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); - + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13); @@ -214,7 +214,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);// -//Slot 3 PCIX 100/66 +//Slot 3 PCIX 100/66 smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);// diff --git a/src/mainboard/tyan/s4882/resourcemap.c b/src/mainboard/tyan/s4882/resourcemap.c index 0e5be61a7c..2ee274960d 100644 --- a/src/mainboard/tyan/s4882/resourcemap.c +++ b/src/mainboard/tyan/s4882/resourcemap.c @@ -144,7 +144,7 @@ static void setup_s4882_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, @@ -200,7 +200,7 @@ static void setup_s4882_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -208,7 +208,7 @@ static void setup_s4882_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, diff --git a/src/mainboard/tyan/s4882/romstage.c b/src/mainboard/tyan/s4882/romstage.c index e1931fc2d4..9bec9de58b 100644 --- a/src/mainboard/tyan/s4882/romstage.c +++ b/src/mainboard/tyan/s4882/romstage.c @@ -1,4 +1,4 @@ - + #include #include #include @@ -70,7 +70,7 @@ static inline void change_i2c_mux(unsigned device) { #define SMBUS_HUB 0x18 int ret, i; - print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n"); + print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n"); i=2; do { ret = smbus_write_byte(SMBUS_HUB, 0x01, device); @@ -93,7 +93,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "lib/generic_sdram.c" /* tyan does not want the default */ -#include "resourcemap.c" +#include "resourcemap.c" #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 @@ -155,7 +155,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) bsp_apicid = init_cpus(cpu_init_detectedx); } - + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); @@ -187,7 +187,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) nodes = get_nodes(); //It's the time to set ctrl now; fill_mem_ctrl(nodes, ctrl, spd_addr); - + enable_smbus(); memreset_setup(); -- cgit v1.2.3