From 373511b2f96807d7a7a6b0b34ad3e7519c311aee Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Fri, 2 Dec 2005 23:16:01 +0000 Subject: issue 41 - fix up motherboard compilation. There's always hope. 1201_ht_bus0_dev0_fidvid_mb.diff part 1 git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2120 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/tyan/s2882/auto.c | 2 +- src/mainboard/tyan/s2882/cache_as_ram_auto.c | 2 +- src/mainboard/tyan/s2882/irq_tables.c | 335 +++++++++++++++++++++++---- 3 files changed, 297 insertions(+), 42 deletions(-) (limited to 'src/mainboard/tyan/s2882') diff --git a/src/mainboard/tyan/s2882/auto.c b/src/mainboard/tyan/s2882/auto.c index 7edb666b9c..700e17650f 100644 --- a/src/mainboard/tyan/s2882/auto.c +++ b/src/mainboard/tyan/s2882/auto.c @@ -20,7 +20,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/tyan/s2882/cache_as_ram_auto.c b/src/mainboard/tyan/s2882/cache_as_ram_auto.c index aa862ece4f..967f068d51 100644 --- a/src/mainboard/tyan/s2882/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2882/cache_as_ram_auto.c @@ -13,7 +13,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" diff --git a/src/mainboard/tyan/s2882/irq_tables.c b/src/mainboard/tyan/s2882/irq_tables.c index add22b4e03..879b438993 100644 --- a/src/mainboard/tyan/s2882/irq_tables.c +++ b/src/mainboard/tyan/s2882/irq_tables.c @@ -1,48 +1,303 @@ -#include +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include #include +#include +#include +#include -#define IRQ_ROUTER_BUS 1 -#define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3) -#define IRQ_ROUTER_VENDOR 0x1022 -#define IRQ_ROUTER_DEVICE 0x746b +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*15, /* there can be total 15 devices on the bus */ + 1, /* Where the interrupt router lies (bus) */ + (4<<3)|3, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x1022, /* Vendor */ + 0x746b, /* Device */ + 0, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xff, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structu +re (including checksum) */ + { + {1,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, + {0x4,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, + {0x4,(6<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x3,(3<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, + {0x3,(1<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0}, + {0x2,(3<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, + {0x2,(2<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0}, + {0x4,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, + {0x4,(5<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x4,(8<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,(6<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,(5<<3)|0, {{0x3, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}}, 0, 0}, + {0x2,(9<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, + {0x3,(4<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0}, + {0x3,(5<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x7, 0}, + } +}; -#define AVAILABLE_IRQS 0xdef8 -#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \ - { bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \ - {linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0} +static unsigned node_link_to_bus(unsigned node, unsigned link) +{ + device_t dev; + unsigned reg; -/* Each IRQ_SLOT entry consists of: - * bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu - */ + dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); + if (!dev) { + return 0; + } + for(reg = 0xE0; reg < 0xF0; reg += 0x04) { + uint32_t config_map; + unsigned dst_node; + unsigned dst_link; + unsigned bus_base; + config_map = pci_read_config32(dev, reg); + if ((config_map & 3) != 3) { + continue; + } + dst_node = (config_map >> 4) & 7; + dst_link = (config_map >> 8) & 3; + bus_base = (config_map >> 16) & 0xff; +#if 0 + printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + dst_node, dst_link, bus_base, + reg, config_map); +#endif + if ((dst_node == node) && (dst_link == link)) + { + return bus_base; + } + } + return 0; +} + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*IRQ_SLOT_COUNT, /* there can be total IRQ_SLOT_COUNT table entries */ - IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */ - IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - IRQ_ROUTER_VENDOR, /* Vendor */ - IRQ_ROUTER_DEVICE, /* Device */ - 0x00, /* Crap (miniport) */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xb0, /* u8 checksum , mod 256 checksum must give zero */ - { /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */ - /* PCI Slot 1-6 */ - IRQ_SLOT(1, 3,1,0, 2,3,4,1 ), - IRQ_SLOT(2, 3,2,0, 3,4,1,2 ), - IRQ_SLOT(3, 2,1,0, 2,3,4,1 ), - IRQ_SLOT(4, 2,2,0, 3,4,1,2 ), - IRQ_SLOT(5, 4,5,0, 2,3,4,1 ), - IRQ_SLOT(6, 4,4,0, 1,2,3,4 ), - /* Onboard NICs */ - IRQ_SLOT(0, 2,3,0, 4,0,0,0 ), - IRQ_SLOT(0, 2,4,0, 4,0,0,0 ), - /* Let Linux know about bus 1 */ - IRQ_SLOT(0, 1,4,3, 0,0,0,0 ), - } -}; unsigned long write_pirq_routing_table(unsigned long addr) { - return copy_pirq_routing_table(addr); + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + + uint8_t sum=0; + int i; + + unsigned char bus_chain_0; + unsigned char bus_8131_1; + unsigned char bus_8131_2; + unsigned char bus_8111_1; + { + device_t dev; + + /* HT chain 0 */ + bus_chain_0 = node_link_to_bus(0, 0); + if (bus_chain_0 == 0) { + printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + bus_chain_0 = 1; + } + + /* 8111 */ + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); + if (dev) { + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + + bus_8111_1 = 4; + } + /* 8131-1 */ + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + + } + else { + printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + + bus_8131_1 = 2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + + } + else { + printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + + bus_8131_2 = 3; + } + } + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...\n", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_chain_0; + pirq->rtr_devfn = (4<<3)|3; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1022; + pirq->rtr_device = 0x746b; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; + + { + device_t dev; + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x04,3)); + if (dev) { + /* initialize PCI interupts - these assignments depend + on the PCB routing of PINTA-D + + PINTA = IRQ5 + PINTB = IRQ9 + PINTC = IRQ11 + PINTD = IRQ10 + */ + pci_write_config16(dev, 0x56, 0xab95); + } + } + + printk_debug("setting Onboard AMD Southbridge \n"); + static const unsigned char slotIrqs_1_4[4] = { 5, 9, 11, 10 }; + pci_assign_irqs(bus_chain_0, 4, slotIrqs_1_4); + write_pirq_info(pirq_info, bus_chain_0,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + printk_debug("setting Onboard AMD USB \n"); + static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 10 }; + pci_assign_irqs(bus_8111_1, 0, slotIrqs_8111_1_0); + write_pirq_info(pirq_info, bus_8111_1,0, 0, 0, 0, 0, 0, 0, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + printk_debug("setting Onboard ATI Display Adapter\n"); + static const unsigned char slotIrqs_8111_1_6[4] = { 11, 0, 0, 0 }; + pci_assign_irqs(bus_8111_1, 6, slotIrqs_8111_1_6); + write_pirq_info(pirq_info, bus_8111_1,(6<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + + printk_debug("setting Slot 1\n"); + static const unsigned char slotIrqs_8131_2_3[4] = { 5, 9, 11, 10 }; + pci_assign_irqs(bus_8131_2, 3, slotIrqs_8131_2_3); + write_pirq_info(pirq_info, bus_8131_2,(3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0); + pirq_info++; slot_num++; + + printk_debug("setting Slot 2\n"); + static const unsigned char slotIrqs_8131_2_1[4] = { 9, 11, 10, 5 }; + pci_assign_irqs(bus_8131_2, 1, slotIrqs_8131_2_1); + write_pirq_info(pirq_info, bus_8131_2,(1<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0); + pirq_info++; slot_num++; + + printk_debug("setting Slot 3\n"); + static const unsigned char slotIrqs_8131_1_3[4] = { 10, 5, 9, 11 }; + pci_assign_irqs(bus_8131_1, 3, slotIrqs_8131_1_3); + write_pirq_info(pirq_info, bus_8131_1,(3<<3)|0, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x3, 0); + pirq_info++; slot_num++; + + printk_debug("setting Slot 4\n"); + static const unsigned char slotIrqs_8131_1_2[4] = { 11, 10, 5, 9 }; + pci_assign_irqs(bus_8131_1, 2, slotIrqs_8131_1_2); + write_pirq_info(pirq_info, bus_8131_1,(2<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x4, 0); + pirq_info++; slot_num++; + + printk_debug("setting Slot 5 \n"); + static const unsigned char slotIrqs_8111_1_4[4] = { 5, 9, 11, 10 }; + pci_assign_irqs(bus_8111_1, 4, slotIrqs_8111_1_4); + write_pirq_info(pirq_info, bus_8111_1,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x5, 0); + pirq_info++; slot_num++; + + printk_debug("setting Onboard SI Serail ATA\n"); + static const unsigned char slotIrqs_8111_1_5[4] = { 10, 0, 0, 0 }; + pci_assign_irqs(bus_8111_1, 5, slotIrqs_8111_1_5); + write_pirq_info(pirq_info, bus_8111_1,(5<<3)|0, 0x4, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + + printk_debug("setting Onboard Intel NIC\n"); + static const unsigned char slotIrqs_8111_1_8[4] = { 11, 0, 0, 0 }; + pci_assign_irqs(bus_8111_1, 8, slotIrqs_8111_1_8); + write_pirq_info(pirq_info, bus_8111_1,(8<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + + printk_debug("setting Onboard Adaptec SCSI\n"); + static const unsigned char slotIrqs_8131_1_6[4] = { 5, 9, 0, 0 }; + pci_assign_irqs(bus_8131_1, 6, slotIrqs_8131_1_6); + write_pirq_info(pirq_info, bus_8131_1,(6<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +#if 0 + //?? + write_pirq_info(pirq_info, bus_8131_1,(5<<3)|0, 0x3, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0); + pirq_info++; slot_num++; +#endif + + printk_debug("setting Onboard Broadcom NIC\n"); + static const unsigned char slotIrqs_8131_1_9[4] = { 5, 9, 0, 0 }; + pci_assign_irqs(bus_8131_1, 9, slotIrqs_8131_1_9); + write_pirq_info(pirq_info, bus_8131_1,(9<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +#if 0 + //?? what's this? + write_pirq_info(pirq_info, bus_8131_2,(4<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x6, 0); + pirq_info++; slot_num++; +#endif + +#if 0 + //?? what's this? + write_pirq_info(pirq_info, bus_8131_2,(5<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x7, 0); + pirq_info++; slot_num++; +#endif + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("done.\n"); + + return (unsigned long) pirq_info; + } -- cgit v1.2.3