From 806e146e754a44f96c693cde707065b14f80d8a2 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Thu, 1 Dec 2005 10:54:44 +0000 Subject: Applying 11_26_car_tyan.diff from Yinghai Lu. NOTE: This will break the tree so it can be fixed up later git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2115 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/tyan/s2880/Config.lb | 18 +- src/mainboard/tyan/s2880/Options.lb | 8 +- src/mainboard/tyan/s2880/cache_as_ram_auto.c | 241 ++++----------------------- 3 files changed, 50 insertions(+), 217 deletions(-) (limited to 'src/mainboard/tyan/s2880') diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb index f7ad508347..e614e04e5c 100644 --- a/src/mainboard/tyan/s2880/Config.lb +++ b/src/mainboard/tyan/s2880/Config.lb @@ -93,9 +93,13 @@ end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## -mainboardinit cpu/x86/16bit/entry16.inc +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds +end + mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds + if USE_DCACHE_RAM if CONFIG_USE_INIT ldscript /cpu/x86/32bit/entry32.lds @@ -204,11 +208,11 @@ chip northbridge/amd/amdk8/root_complex device pci 9.0 on end #broadcom device pci 9.1 on end end -# chip drivers/lsi/53c1030 -# device pci a.0 on end -# device pci a.1 on end -# register "fw_address" = "0xfff8c000" -# end + chip drivers/lsi/53c1030 + device pci a.0 on end + device pci a.1 on end + register "fw_address" = "0xfff8c000" + end end device pci 0.1 on end device pci 1.0 on end diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb index 1f929b0edc..23b239afb4 100644 --- a/src/mainboard/tyan/s2880/Options.lb +++ b/src/mainboard/tyan/s2880/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_E0_MEM_HOLE_SIZEK +uses K8_HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -71,7 +71,9 @@ default ROM_SIZE=524288 ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=131072 +#default FALLBACK_SIZE=131072 +#256K +default FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot @@ -120,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=0 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_E0_MEM_HOLE_SIZEK=0x100000 +default K8_HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 diff --git a/src/mainboard/tyan/s2880/cache_as_ram_auto.c b/src/mainboard/tyan/s2880/cache_as_ram_auto.c index 59500f1cfe..3ada300474 100644 --- a/src/mainboard/tyan/s2880/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2880/cache_as_ram_auto.c @@ -13,8 +13,8 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" + #include "northbridge/amd/amdk8/cpu_rev.c" -#define K8_HT_FREQ_1G_SUPPORT 0 #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" @@ -36,27 +36,6 @@ #include "northbridge/amd/amdk8/setup_resource_map.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) -/* Look up a which bus a given node/link combination is on. - * return 0 when we can't find the answer. - */ -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - unsigned reg; - - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - unsigned config_map; - config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); - if ((config_map & 3) != 3) { - continue; - } - if ((((config_map >> 4) & 7) == node) && - (((config_map >> 8) & 3) == link)) - { - return (config_map >> 16) & 0xff; - } - } - return 0; -} static void hard_reset(void) { @@ -123,54 +102,28 @@ static inline int spd_read_byte(unsigned device, unsigned address) #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 -#include "cpu/amd/dualcore/dualcore.c" -#else -#include "cpu/amd/model_fxx/node_id.c" #endif - -#define FIRST_CPU 1 -#define SECOND_CPU 1 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) +#include "cpu/amd/dualcore/dualcore.c" #include "cpu/amd/car/copy_and_run.c" +#include "cpu/amd/car/post_cache_as_ram.c" + +#include "cpu/amd/model_fxx/init_cpus.c" + + #if USE_FALLBACK_IMAGE == 1 #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" -void real_main(unsigned long bist); - -void amd64_main(unsigned long bist) +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) { -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif - /* Make cerain my local apic is useable */ -// enable_lapic(); - -#if CONFIG_LOGICAL_CPUS==1 - id = get_node_core_id_x(); - /* Is this a cpu only reset? */ - if (cpu_init_detected(id.nodeid)) { -#else -// nodeid = lapicid(); - nodeid = get_node_id(); - /* Is this a cpu only reset? */ - if (cpu_init_detected(nodeid)) { -#endif - if (last_boot_normal()) { - goto normal_image; - } else { - goto cpu_reset; - } - } + unsigned last_boot_normal_x = last_boot_normal(); - /* Is this a secondary cpu? */ - if (!boot_cpu()) { - if (last_boot_normal()) { + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { goto normal_image; } else { goto fallback_image; @@ -182,11 +135,10 @@ void amd64_main(unsigned long bist) enumerate_ht_chain(); - /* Setup the ck804 */ amd8111_enable_rom(); /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal()) { + if (bios_reset_detected() && last_boot_normal_x) { goto normal_image; } /* This is the primary cpu how should I boot? */ @@ -199,27 +151,29 @@ void amd64_main(unsigned long bist) normal_image: __asm__ volatile ("jmp __normal_image" : /* outputs */ - : "a" (bist) /* inputs */ - ); - cpu_reset: -#if 0 - //CPU reset will reset memtroller ??? - asm volatile ("jmp __cpu_reset" - : /* outputs */ - : "a"(bist) /* inputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ ); -#endif fallback_image: - real_main(bist); + ; } -void real_main(unsigned long bist) -#else -void amd64_main(unsigned long bist) #endif + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + +#if USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); +#endif + real_main(bist, cpu_init_detectedx); + +} + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const struct mem_controller cpu[] = { -#if FIRST_CPU { .node_id = 0, .f0 = PCI_DEV(0, 0x18, 0), @@ -229,8 +183,7 @@ void amd64_main(unsigned long bist) .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, }, -#endif -#if SECOND_CPU +#if CONFIG_MAX_PHYSICAL_CPUS > 1 { .node_id = 1, .f0 = PCI_DEV(0, 0x19, 0), @@ -247,51 +200,7 @@ void amd64_main(unsigned long bist) unsigned cpu_reset = 0; if (bist == 0) { -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif - /* Skip this if there was a built in self test failure */ -// amd_early_mtrr_init(); # don't need, already done in cache_as_ram - -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); - id = get_node_core_id_x(); // that is initid -#else - nodeid = get_node_id(); -#endif - - enable_lapic(); - init_timer(); - - -#if CONFIG_LOGICAL_CPUS==1 - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { - cpu_reset = 1; - goto cpu_reset_x; - } - distinguish_cpu_resets(id.nodeid); - } -#else - if (cpu_init_detected(nodeid)) { - cpu_reset = 1; - goto cpu_reset_x; - } - distinguish_cpu_resets(nodeid); -#endif - - - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - // We need stop the CACHE as RAM for this CPU too - #include "cpu/amd/car/cache_as_ram_post.c" - stop_this_cpu(); // it will stop all cores except core0 of cpu0 - } + init_cpus(cpu_init_detectedx); } @@ -307,8 +216,10 @@ void amd64_main(unsigned long bist) needs_reset = setup_coherent_ht_domain(); #if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched start_other_cores(); #endif + // automatically set that for you, but you might meet tight space needs_reset |= ht_setup_chains_x(); if (needs_reset) { @@ -321,89 +232,5 @@ void amd64_main(unsigned long bist) memreset_setup(); sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); -#if 1 - { - /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ - unsigned v_esp; - __asm__ volatile ( - "movl %%esp, %0\n\t" - : "=a" (v_esp) - ); -#if CONFIG_USE_INIT - printk_debug("v_esp=%08x\r\n", v_esp); -#else - print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); -#endif - } -#endif - -#if 1 - - -cpu_reset_x: - -#if CONFIG_USE_INIT - printk_debug("cpu_reset = %08x\r\n",cpu_reset); -#else - print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); -#endif - - if(cpu_reset == 0) { - print_debug("Clearing initial memory region: "); - } - print_debug("No cache as ram now - "); - - /* store cpu_reset to ebx */ - __asm__ volatile ( - "movl %0, %%ebx\n\t" - ::"a" (cpu_reset) - ); - - if(cpu_reset==0) { -#define CLEAR_FIRST_1M_RAM 1 -#include "cpu/amd/car/cache_as_ram_post.c" - } - else { -#undef CLEAR_FIRST_1M_RAM -#include "cpu/amd/car/cache_as_ram_post.c" - } - - __asm__ volatile ( - /* set new esp */ /* before _RAMBASE */ - "subl %0, %%ebp\n\t" - "subl %0, %%esp\n\t" - ::"a"( (DCACHE_RAM_BASE + DCACHE_RAM_SIZE)- _RAMBASE ) - ); - - { - unsigned new_cpu_reset; - - /* get back cpu_reset from ebx */ - __asm__ volatile ( - "movl %%ebx, %0\n\t" - :"=a" (new_cpu_reset) - ); - - print_debug("Use Ram as Stack now - "); /* but We can not go back any more, we lost old stack data in cache as ram*/ - if(new_cpu_reset==0) { - print_debug("done\r\n"); - } else - { - print_debug("\r\n"); - } - -#if CONFIG_USE_INIT - printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); -#else - print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); -#endif - /*copy and execute linuxbios_ram */ - copy_and_run(new_cpu_reset); - /* We will not return */ - } -#endif - - - print_debug("should not be here -\r\n"); - + post_cache_as_ram(cpu_reset); } -- cgit v1.2.3