From c143693c260391918bf1233c59172514bb9bfa21 Mon Sep 17 00:00:00 2001 From: Libra Li Date: Wed, 23 Dec 2009 19:16:47 +0000 Subject: Add mainboard x86emu interrupt function support. Add tim5690 VGA BIOS functions: int15 getting LCD panel ID. Signed-off-by: Libra Li Acked-by: Marc Jones git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4990 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/technexion/tim5690/Makefile.inc | 1 + .../technexion/tim5690/cache_as_ram_auto.c | 15 --- src/mainboard/technexion/tim5690/mainboard.c | 128 +++++++++++++++++++++ src/mainboard/technexion/tim5690/vgabios.c | 77 +++++++++++++ src/mainboard/technexion/tim5690/vgabios.h | 37 ++++++ 5 files changed, 243 insertions(+), 15 deletions(-) create mode 100644 src/mainboard/technexion/tim5690/vgabios.c create mode 100644 src/mainboard/technexion/tim5690/vgabios.h (limited to 'src/mainboard/technexion') diff --git a/src/mainboard/technexion/tim5690/Makefile.inc b/src/mainboard/technexion/tim5690/Makefile.inc index 8304126780..909c29077d 100644 --- a/src/mainboard/technexion/tim5690/Makefile.inc +++ b/src/mainboard/technexion/tim5690/Makefile.inc @@ -33,6 +33,7 @@ obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o obj-y += tn_post_code.o obj-y += speaker.o +obj-y += vgabios.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/technexion/tim5690/cache_as_ram_auto.c b/src/mainboard/technexion/tim5690/cache_as_ram_auto.c index 0e1fbb1b40..4919078424 100644 --- a/src/mainboard/technexion/tim5690/cache_as_ram_auto.c +++ b/src/mainboard/technexion/tim5690/cache_as_ram_auto.c @@ -145,20 +145,6 @@ fallback_image: } #endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */ -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - /* Init Super I/O GPIOs. Done early. */ - it8712f_enter_conf(); - outb(IT8712F_CONFIG_REG_LDN, SIO_INDEX); - outb(IT8712F_GPIO, SIO_DATA); - outb(0x62, SIO_INDEX); // set Simple I/O Base Address 0x200 - outb(0x02, SIO_DATA); - outb(0x63, SIO_INDEX); - outb(0x00, SIO_DATA); - it8712f_exit_conf(); -} - void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) @@ -191,7 +177,6 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) /* it8712f_enable_serial does not use its 1st parameter. */ it8712f_enable_serial(0, CONFIG_TTYS0_BASE); - mb_gpio_init(); it8712f_kill_watchdog(); uart_init(); console_init(); diff --git a/src/mainboard/technexion/tim5690/mainboard.c b/src/mainboard/technexion/tim5690/mainboard.c index 85b7428f43..8ca3f4c8f5 100644 --- a/src/mainboard/technexion/tim5690/mainboard.c +++ b/src/mainboard/technexion/tim5690/mainboard.c @@ -26,13 +26,56 @@ #include #include #include <../southbridge/amd/sb600/sb600.h> +#include <../superio/ite/it8712f/it8712f.h> #include "chip.h" #include "tn_post_code.h" +#include "vgabios.h" #define ADT7461_ADDRESS 0x4C #define ARA_ADDRESS 0x0C /* Alert Response Address */ #define SMBUS_IO_BASE 0x1000 + +/* Video BIOS Function Extensions Specification + */ +//Callback Sub-Function 00h - Get LCD Panel ID +#define LCD_PANEL_ID_NO 0x00 /* No LCD */ +#define LCD_PANEL_ID_01 0x01 /* 1024x768, 24 bits, 1 channel */ +#define LCD_PANEL_ID_02 0x02 /* 1280x1024, 24 bits, 2 channels */ +#define LCD_PANEL_ID_03 0x03 /* 1440x900, 24 bits, 2 channels */ +#define LCD_PANEL_ID_04 0x04 /* 1680x1050, 24 bits, 2 channels */ +#define LCD_PANEL_ID_05 0x05 /* 1920x1200, 24 bits, 2 channels */ +#define LCD_PANEL_ID_06 0x06 /* 1920x1080, 24 bits, 2 channels */ +//Callback Sub-Function 05h – Select Boot-up TV Standard +#define TV_MODE_00 0x00 /* NTSC */ +#define TV_MODE_01 0x01 /* PAL */ +#define TV_MODE_02 0x02 /* PALM */ +#define TV_MODE_03 0x03 /* PAL60 */ +#define TV_MODE_04 0x04 /* NTSCJ */ +#define TV_MODE_05 0x05 /* PALCN */ +#define TV_MODE_06 0x06 /* PALN */ +#define TV_MODE_09 0x09 /* SCART-RGB */ +#define TV_MODE_NO 0xff /* No TV Support */ + + +/* The base address is 0x2e or 0x4e, depending on config bytes. */ +#define SIO_BASE 0x2e +#define SIO_INDEX SIO_BASE +#define SIO_DATA SIO_BASE+1 + +/* Global configuration registers. */ +#define IT8712F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ +#define IT8712F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ +#define IT8712F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ +#define IT8712F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ +#define IT8712F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */ +#define IT8712F_CONFIG_REG_MFC 0x2a /* Multi-function control */ +#define IT8712F_CONFIG_REG_WATCHDOG 0x72 /* Watchdog control. */ + +#define IT8712F_CONFIGURATION_PORT 0x2e /* Write-only. */ +#define IT8712F_SIMPLE_IO_BASE 0x200 /* Simple I/O base address */ + + extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); @@ -54,6 +97,36 @@ int add_mainboard_resources(struct lb_memory *mem); uint64_t uma_memory_base, uma_memory_size; +/* The content of IT8712F_CONFIG_REG_LDN (index 0x07) must be set to the + LDN the register belongs to, before you can access the register. */ +static void it8712f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) +{ + outb(IT8712F_CONFIG_REG_LDN, SIO_BASE); + outb(ldn, SIO_DATA); + outb(index, SIO_BASE); + outb(value, SIO_DATA); +} + +static void it8712f_enter_conf(void) +{ + /* Enter the configuration state (MB PnP mode). */ + + /* Perform MB PnP setup to put the SIO chip at 0x2e. */ + /* Base address 0x2e: 0x87 0x01 0x55 0x55. */ + /* Base address 0x4e: 0x87 0x01 0x55 0xaa. */ + outb(0x87, IT8712F_CONFIGURATION_PORT); + outb(0x01, IT8712F_CONFIGURATION_PORT); + outb(0x55, IT8712F_CONFIGURATION_PORT); + outb(0x55, IT8712F_CONFIGURATION_PORT); +} + +static void it8712f_exit_conf(void) +{ + /* Exit the configuration state (MB PnP mode). */ + it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02); +} + + /* set thermal config */ static void set_thermal_config(void) @@ -117,6 +190,48 @@ static void set_thermal_config(void) */ } +/* Mainboard specific GPIO setup. */ +void mb_gpio_init(u16 *iobase) +{ + /* Init Super I/O GPIOs. */ + it8712f_enter_conf(); + outb(IT8712F_CONFIG_REG_LDN, SIO_INDEX); + outb(IT8712F_GPIO, SIO_DATA); + outb(0x62, SIO_INDEX); + outb((*iobase >> 8), SIO_DATA); + outb(0x63, SIO_INDEX); + outb((*iobase & 0xff), SIO_DATA); + it8712f_exit_conf(); +} + +/* The LCD's panel id seletion. */ +void lcd_panel_id(rs690_vbios_regs *vbios_regs, u8 num_id) +{ + switch (num_id) { + case 0x1: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_01; + break; + case 0x2: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_02; + break; + case 0x3: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_03; + break; + case 0x4: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_04; + break; + case 0x5: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_05; + break; + case 0x6: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_06; + break; + default: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_NO; + break; + } +} + /************************************************* * enable the dedicated function in tim5690 board. * This function called early than rs690_enable. @@ -126,8 +241,21 @@ void tim5690_enable(device_t dev) struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info; + rs690_vbios_regs vbios_regs; + u16 gpio_base = IT8712F_SIMPLE_IO_BASE; + u8 port2; + printk_info("Mainboard tim5690 Enable. dev=0x%p\n", dev); + mb_gpio_init(&gpio_base); + + /* The LCD's panel id seletion by switch. */ + port2 = inb(gpio_base+1); + lcd_panel_id(&vbios_regs, ((~port2) & 0xf)); + /* No support TV */ + vbios_regs.int15_regs.fun05_tv_standard = TV_MODE_NO; + vgabios_init(&vbios_regs); + #if (CONFIG_GFXUMA == 1) msr_t msr, msr2; diff --git a/src/mainboard/technexion/tim5690/vgabios.c b/src/mainboard/technexion/tim5690/vgabios.c new file mode 100644 index 0000000000..45b11ae41c --- /dev/null +++ b/src/mainboard/technexion/tim5690/vgabios.c @@ -0,0 +1,77 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 coresystems GmbH + * Copyright (C) 2009 Libra Li + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include "vgabios.h" + + +int tim5690_int15_handler(struct eregs *regs); + +static rs690_vbios_regs vbios_regs_local; + +/* Initialization interrupt function */ +static void vbios_fun_init(rs690_vbios_regs *vbios_regs) +{ + vbios_regs_local.int15_regs.fun00_panel_id = vbios_regs->int15_regs.fun00_panel_id; + vbios_regs_local.int15_regs.fun05_tv_standard = vbios_regs->int15_regs.fun05_tv_standard; +} +/* BIOS int15 function */ +int tim5690_int15_handler(struct eregs *regs) +{ + int res = -1; + + printk(BIOS_DEBUG, "tim5690_int15_handler\n"); + + switch (regs->eax & 0xffff) { + case AMD_RS690_INT15: + switch (regs->ebx & 0xff) { + case 0x00: + regs->eax &= ~(0xff); + regs->ebx = (regs->ebx & ~(0xff)) | vbios_regs_local.int15_regs.fun00_panel_id; + res = 0; + break; + case 0x05: + regs->eax &= ~(0xff); + regs->ebx = (regs->ebx & ~(0xff)) | vbios_regs_local.int15_regs.fun05_tv_standard; + res = 0; + break; + } + break; + default: + printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", + regs->eax & 0xffff); + break; + } + + return res; +} + +/* Initialization VBIOS function */ +void vgabios_init(rs690_vbios_regs *vbios_regs) +{ + printk(BIOS_DEBUG, "vgabios_init\n"); + + mainboard_interrupt_handlers(0x15, &tim5690_int15_handler); + vbios_fun_init(vbios_regs); +} diff --git a/src/mainboard/technexion/tim5690/vgabios.h b/src/mainboard/technexion/tim5690/vgabios.h new file mode 100644 index 0000000000..b740193136 --- /dev/null +++ b/src/mainboard/technexion/tim5690/vgabios.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 coresystems GmbH + * Copyright (C) 2009 Libra Li + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* AMD Chipset */ +#define AMD_RS690_INT15 0x4E08 + +typedef struct __rs690_int15_regs__ +{ + u8 fun00_panel_id; // Callback Sub-Function 00h - Get LCD Panel ID + u8 fun05_tv_standard; // Callback Sub-Function 05h - Select Boot-up TV Standard +}rs690_int15_regs; + +typedef struct __rs690_vbios_regs__ +{ + rs690_int15_regs int15_regs; +}rs690_vbios_regs; + +/* Initialization VBIOS function */ +extern void vgabios_init(rs690_vbios_regs *vbios_regs); -- cgit v1.2.3