From 57fecef66f993a519105f6effb408d9caae1bcac Mon Sep 17 00:00:00 2001 From: Tim Crawford Date: Sun, 24 Jul 2022 17:09:16 -0600 Subject: mb/system76: Change touchpad detection method Use the new "detect" method instead of "probed". Fixes an uncommon issue where i2c-hid fails to initialize the device on Linux. Tested on: gaze15, gaze16-3060, lemp10, oryp8 Tested: - Linux: Touchpad works across 50 reboots - Windows: Touchpad is still detected as an I2C HID device - Windows: Extra I2C HID devices are not shown in Device Manager Change-Id: I6a899c64a6d77b65a2ae57ab8df81cd84b568184 Signed-off-by: Tim Crawford Reviewed-on: https://review.coreboot.org/c/coreboot/+/66129 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier --- src/mainboard/system76/addw1/variants/addw2/overridetree.cb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/mainboard/system76/addw1/variants/addw2') diff --git a/src/mainboard/system76/addw1/variants/addw2/overridetree.cb b/src/mainboard/system76/addw1/variants/addw2/overridetree.cb index 4ef8b1ed41..40e2128db3 100644 --- a/src/mainboard/system76/addw1/variants/addw2/overridetree.cb +++ b/src/mainboard/system76/addw1/variants/addw2/overridetree.cb @@ -13,7 +13,7 @@ chip soc/intel/cannonlake register "generic.hid" = ""SYNA1202"" register "generic.desc" = ""Synaptics Touchpad"" register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_A14_IRQ)" - register "generic.probed" = "1" + register "generic.detect" = "1" register "hid_desc_reg_offset" = "0x20" device i2c 2c on end end -- cgit v1.2.3