From a73dcbe736fb565e932bccee6a34c4c566e89431 Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Tue, 31 Mar 2015 11:54:03 -0500 Subject: mainboard/supermicro/h8qme_fam10: Fix indentations and spelling Change-Id: I49c5d39a674351f7375fb762fc9ef4a3700d7c87 Signed-off-by: Timothy Pearson Reviewed-on: http://review.coreboot.org/9177 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin --- src/mainboard/supermicro/h8qme_fam10/romstage.c | 181 ++++++++++++------------ 1 file changed, 91 insertions(+), 90 deletions(-) (limited to 'src/mainboard/supermicro/h8qme_fam10/romstage.c') diff --git a/src/mainboard/supermicro/h8qme_fam10/romstage.c b/src/mainboard/supermicro/h8qme_fam10/romstage.c index 7a75159d06..8583f2a344 100644 --- a/src/mainboard/supermicro/h8qme_fam10/romstage.c +++ b/src/mainboard/supermicro/h8qme_fam10/romstage.c @@ -50,10 +50,11 @@ #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) #define DUMMY_DEV PNP_DEV(0x2e, 0) -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ #define SMBUS_SWITCH1 0x70 #define SMBUS_SWITCH2 0x72 + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ smbus_send_byte(SMBUS_SWITCH1, 5 & 0x0f); smbus_send_byte(SMBUS_SWITCH2, (5 >> 4) & 0x0f); } @@ -77,36 +78,36 @@ static inline int spd_read_byte(unsigned device, unsigned address) static void sio_setup(void) { - uint32_t dword; - uint8_t byte; - enable_smbus(); + uint32_t dword; + uint8_t byte; + enable_smbus(); // smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ smbusx_write_byte(1, (0x58>>1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); - dword |= (1<<16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); } static const u8 spd_addr[] = { - //first node + /* first node */ RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, #if CONFIG_MAX_PHYSICAL_CPUS > 1 - //second node + /* second node */ RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0, #endif #if CONFIG_MAX_PHYSICAL_CPUS > 2 - //third node + /* third node */ RC02, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, - //forth node + /* fourth node */ RC03, DIMM4, DIMM6,0 , 0, DIMM5, DIMM7, 0, 0, #endif }; @@ -183,12 +184,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) sio_setup(); } - post_code(0x30); + post_code(0x30); if (bist == 0) bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - post_code(0x32); + post_code(0x32); w83627hf_set_clksel_48(DUMMY_DEV); winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); @@ -200,113 +201,113 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Halt if there was a built in self test failure */ report_bist_failure(bist); - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); - update_microcode(val); + update_microcode(val); - post_code(0x33); + post_code(0x33); - cpuSetAMDMSR(); - post_code(0x34); + cpuSetAMDMSR(); + post_code(0x34); - amd_ht_init(sysinfo); - post_code(0x35); + amd_ht_init(sysinfo); + post_code(0x35); - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - * It would be nice to fixup prink spinlocks for ROM XIP mode. - * I think it could be done by putting the spinlock flag in the cache - * of the BSP located right after sysinfo. - */ + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + * It would be nice to fixup prink spinlocks for ROM XIP mode. + * I think it could be done by putting the spinlock flag in the cache + * of the BSP located right after sysinfo. + */ - wait_all_core0_started(); + wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); #endif - post_code(0x38); + post_code(0x38); #if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - /* FIXME: The sb fid change may survive the warm reset and only - * need to be done once.*/ + /* FIXME: The sb fid change may survive the warm reset and only + * need to be done once.*/ - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - post_code(0x39); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + post_code(0x39); - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } - post_code(0x3A); + post_code(0x3A); - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); #endif init_timer(); // Need to use TMICT to synchronize FID/VID - wants_reset = mcp55_early_setup_x(); + wants_reset = mcp55_early_setup_x(); - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - printk(BIOS_INFO, "...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + printk(BIOS_INFO, "...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } - if (wants_reset) - printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n"); + if (wants_reset) + printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n"); - post_code(0x3B); + post_code(0x3B); -/* It's the time to set ctrl in sysinfo now; */ -printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); -fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); -post_code(0x3D); + post_code(0x3D); -//printk(BIOS_DEBUG, "enable_smbus()\n"); -// enable_smbus(); /* enable in sio_setup */ +// printk(BIOS_DEBUG, "enable_smbus()\n"); +// enable_smbus(); /* enable in sio_setup */ -post_code(0x40); + post_code(0x40); timestamp_add_now(TS_BEFORE_INITRAM); - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); timestamp_add_now(TS_AFTER_INITRAM); - cbmem_initialize_empty(); - post_code(0x41); + cbmem_initialize_empty(); + post_code(0x41); - amdmct_cbmem_store_info(sysinfo); + amdmct_cbmem_store_info(sysinfo); timestamp_add_now(TS_END_ROMSTAGE); - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x42); // Should never see this post code. + post_cache_as_ram(); /* BSP switch stack to ram, copy then execute CB. */ + post_code(0x42); /* Should never see this post code. */ } /** -- cgit v1.2.3