From 0867062412dd4bfe5a556e5f3fd85ba5b682d79b Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Tue, 30 Jun 2009 15:17:49 +0000 Subject: This patch unifies the use of config options in v2 to all start with CONFIG_ It's basically done with the following script and some manual fixup: VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC` for VAR in $VARS; do find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \; done Signed-off-by: Stefan Reinauer Acked-by: Ronald G. Minnich git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/supermicro/h8dme/Config.lb | 46 ++-- src/mainboard/supermicro/h8dme/Options.lb | 260 ++++++++++----------- src/mainboard/supermicro/h8dme/apc_auto.c | 4 +- src/mainboard/supermicro/h8dme/cache_as_ram_auto.c | 24 +- 4 files changed, 167 insertions(+), 167 deletions(-) (limited to 'src/mainboard/supermicro/h8dme') diff --git a/src/mainboard/supermicro/h8dme/Config.lb b/src/mainboard/supermicro/h8dme/Config.lb index c3ad78a215..9c07ae9b6f 100644 --- a/src/mainboard/supermicro/h8dme/Config.lb +++ b/src/mainboard/supermicro/h8dme/Config.lb @@ -16,8 +16,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/failovercalculation.lb arch i386 end @@ -30,30 +30,30 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end end -if USE_FAILOVER_IMAGE +if CONFIG_USE_FAILOVER_IMAGE else if CONFIG_AP_CODE_IN_CAR makerule ./apc_auto.o - depends "$(MAINBOARD)/apc_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/apc_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@" end ldscript /arch/i386/init/ldscript_apc.lb end @@ -63,13 +63,13 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -88,8 +88,8 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -97,7 +97,7 @@ if HAVE_FAILOVER_BOOT ldscript /cpu/x86/32bit/reset32.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -115,13 +115,13 @@ ldscript /southbridge/nvidia/mcp55/id.lds ## ## ROMSTRAP table for MCP55 ## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end @@ -137,12 +137,12 @@ end ### Things are delicate and we test to see if we should ### failover to another image. ### -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE ldscript /arch/i386/lib/failover_failover.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end end diff --git a/src/mainboard/supermicro/h8dme/Options.lb b/src/mainboard/supermicro/h8dme/Options.lb index 643cab37cb..d10e4b3304 100644 --- a/src/mainboard/supermicro/h8dme/Options.lb +++ b/src/mainboard/supermicro/h8dme/Options.lb @@ -19,91 +19,91 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses HAVE_ACPI_TABLES -uses HAVE_ACPI_RESUME -uses ACPI_SSDTX_NUM -uses USE_FALLBACK_IMAGE -uses USE_FAILOVER_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_FAILOVER_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_HAVE_ACPI_RESUME +uses CONFIG_ACPI_SSDTX_NUM +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_USE_FAILOVER_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_FAILOVER_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses FAILOVER_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_FAILOVER_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_NRV2B uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses HAVE_LOW_TABLES +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_HAVE_LOW_TABLES uses CONFIG_MULTIBOOT -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK -uses HW_MEM_HOLE_SIZE_AUTO_INC -uses K8_HT_FREQ_1G_SUPPORT - -uses HT_CHAIN_UNITID_BASE -uses HT_CHAIN_END_UNITID_BASE -uses SB_HT_CHAIN_ON_BUS0 -uses SB_HT_CHAIN_UNITID_OFFSET_ONLY - -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE -uses DCACHE_RAM_GLOBAL_VAR_SIZE +uses CONFIG_HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC +uses CONFIG_K8_HT_FREQ_1G_SUPPORT + +uses CONFIG_HT_CHAIN_UNITID_BASE +uses CONFIG_HT_CHAIN_END_UNITID_BASE +uses CONFIG_SB_HT_CHAIN_ON_BUS0 +uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY + +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE +uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE uses CONFIG_USE_INIT -uses SERIAL_CPU_INIT +uses CONFIG_SERIAL_CPU_INIT -uses ENABLE_APIC_EXT_ID -uses APIC_ID_OFFSET -uses LIFT_BSP_APIC_ID +uses CONFIG_ENABLE_APIC_EXT_ID +uses CONFIG_APIC_ID_OFFSET +uses CONFIG_LIFT_BSP_APIC_ID uses CONFIG_PCI_64BIT_PREF_MEM @@ -111,9 +111,9 @@ uses CONFIG_LB_MEM_TOPK uses CONFIG_AP_CODE_IN_CAR -uses MEM_TRAIN_SEQ +uses CONFIG_MEM_TRAIN_SEQ -uses WAIT_BEFORE_CPUS_INIT +uses CONFIG_WAIT_BEFORE_CPUS_INIT uses CONFIG_USE_PRINTK_IN_CAR @@ -122,24 +122,24 @@ uses CONFIG_USE_PRINTK_IN_CAR ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -#default ROM_SIZE=524288 -default ROM_SIZE=0x100000 +#default CONFIG_ROM_SIZE=524288 +default CONFIG_ROM_SIZE=0x100000 -default HAVE_LOW_TABLES = 0 +default CONFIG_HAVE_LOW_TABLES = 0 default CONFIG_MULTIBOOT=0 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 -#default FALLBACK_SIZE=0x40000 +#default CONFIG_FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=0x40000 #FALLBACK: 256K-4K -default FALLBACK_SIZE=0x3f000 +default CONFIG_FALLBACK_SIZE=0x3f000 #FAILOVER: 4K -default FAILOVER_SIZE=0x01000 +default CONFIG_FAILOVER_SIZE=0x01000 #more 1M for pgtbl default CONFIG_LB_MEM_TOPK=2048 @@ -147,40 +147,40 @@ default CONFIG_LB_MEM_TOPK=2048 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 -default HAVE_FAILOVER_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FAILOVER_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=11 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ACPI tables will be included -default HAVE_ACPI_TABLES=0 +default CONFIG_HAVE_ACPI_TABLES=0 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -191,41 +191,41 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 -default SERIAL_CPU_INIT=0 +default CONFIG_SERIAL_CPU_INIT=0 -default ENABLE_APIC_EXT_ID=0 -default APIC_ID_OFFSET=0x10 -default LIFT_BSP_APIC_ID=1 +default CONFIG_ENABLE_APIC_EXT_ID=0 +default CONFIG_APIC_ID_OFFSET=0x10 +default CONFIG_LIFT_BSP_APIC_ID=1 #memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. #2G -#default HW_MEM_HOLE_SIZEK=0x200000 +#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000 #1G -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 #512M -#default HW_MEM_HOLE_SIZEK=0x80000 +#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000 #make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy -#default HW_MEM_HOLE_SIZE_AUTO_INC=1 +#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1 #Opteron K8 1G HT Support -default K8_HT_FREQ_1G_SUPPORT=1 +default CONFIG_K8_HT_FREQ_1G_SUPPORT=1 #VGA Console default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 #HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device -default HT_CHAIN_UNITID_BASE=0 +default CONFIG_HT_CHAIN_UNITID_BASE=0 #real SB Unit ID, default is 0x20, mean dont touch it at last -#default HT_CHAIN_END_UNITID_BASE=0x6 +#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6 #make the SB HT chain on bus 0, default is not (0) -default SB_HT_CHAIN_ON_BUS0=2 +default CONFIG_SB_HT_CHAIN_ON_BUS0=2 #only offset for SB chain?, default is yes(1) -default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 +default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 #allow capable device use that above 4G #default CONFIG_PCI_64BIT_PREF_MEM=1 @@ -233,15 +233,15 @@ default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xc8000 -default DCACHE_RAM_SIZE=0x08000 -default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xc8000 +default CONFIG_DCACHE_RAM_SIZE=0x08000 +default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 default CONFIG_USE_INIT=0 default CONFIG_AP_CODE_IN_CAR=1 -default MEM_TRAIN_SEQ=1 -default WAIT_BEFORE_CPUS_INIT=1 +default CONFIG_MEM_TRAIN_SEQ=1 +default CONFIG_WAIT_BEFORE_CPUS_INIT=1 ## ## Build code to setup a generic IOAPIC @@ -251,37 +251,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="h8dme" -default MAINBOARD_VENDOR="Supermicro" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511 +default CONFIG_MAINBOARD_PART_NUMBER="h8dme" +default CONFIG_MAINBOARD_VENDOR="Supermicro" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 32K heap ## -default HEAP_SIZE=0x8000 +default CONFIG_HEAP_SIZE=0x8000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) +default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE ) ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00100000 +default CONFIG_RAMBASE=0x00100000 ## ## Load the payload from the ROM @@ -297,8 +297,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -314,21 +314,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -340,17 +340,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=9 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=9 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=9 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/supermicro/h8dme/apc_auto.c b/src/mainboard/supermicro/h8dme/apc_auto.c index 099b6abd17..442945e9f2 100644 --- a/src/mainboard/supermicro/h8dme/apc_auto.c +++ b/src/mainboard/supermicro/h8dme/apc_auto.c @@ -94,8 +94,8 @@ static inline unsigned get_nodes(void) void hardwaremain(int ret_addr) { - struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE - struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM + struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE + struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM struct node_core_id id; diff --git a/src/mainboard/supermicro/h8dme/cache_as_ram_auto.c b/src/mainboard/supermicro/h8dme/cache_as_ram_auto.c index a71de8428c..606556ba73 100644 --- a/src/mainboard/supermicro/h8dme/cache_as_ram_auto.c +++ b/src/mainboard/supermicro/h8dme/cache_as_ram_auto.c @@ -35,7 +35,7 @@ //if we want to wait for core1 done before DQS training, set it to 0 #define K8_SET_FIDVID_CORE0_ONLY 1 -#if K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT == 1 #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -53,7 +53,7 @@ // for enable the FAN #include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" @@ -72,7 +72,7 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "superio/winbond/w83627hf/w83627hf_early_init.c" -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 #include "cpu/x86/bist.h" @@ -194,7 +194,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) +#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -263,7 +263,7 @@ normal_image: ); fallback_image: -#if HAVE_FAILOVER_BOOT==1 +#if CONFIG_HAVE_FAILOVER_BOOT==1 __asm__ volatile ("jmp __fallback_image": /* outputs */ :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ ) @@ -275,14 +275,14 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if HAVE_FAILOVER_BOOT==1 -#if USE_FAILOVER_IMAGE==1 +#if CONFIG_HAVE_FAILOVER_BOOT==1 +#if CONFIG_USE_FAILOVER_IMAGE==1 failover_process(bist, cpu_init_detectedx); #else real_main(bist, cpu_init_detectedx); #endif #else -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); @@ -293,7 +293,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #define RC0 (2<<8) #define RC1 (1<<8) -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 void real_main(unsigned long bist, unsigned long cpu_init_detectedx) { @@ -315,7 +315,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) }; struct sys_info *sysinfo = - (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); + (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); int needs_reset = 0; unsigned bsp_apicid = 0; @@ -326,7 +326,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) pnp_enter_ext_func_mode(SERIAL_DEV); pnp_write_config(SERIAL_DEV, 0x24, 0x84 | (1 << 6)); - w83627hf_enable_dev(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE); pnp_exit_ext_func_mode(SERIAL_DEV); uart_init(); @@ -347,7 +347,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) print_debug_hex8(bsp_apicid); print_debug("\r\n"); -#if MEM_TRAIN_SEQ == 1 +#if CONFIG_MEM_TRAIN_SEQ == 1 set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram #endif /* dump_smbus_registers(); */ -- cgit v1.2.3