From 5ff7c13e858a31addf1558731a12cf6c753b576d Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Mon, 31 Oct 2011 12:56:45 -0700 Subject: remove trailing whitespace Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi --- src/mainboard/siemens/sitemp_g1p1/acpi_tables.c | 28 ++-- src/mainboard/siemens/sitemp_g1p1/int15_func.c | 4 +- src/mainboard/siemens/sitemp_g1p1/mainboard.c | 168 ++++++++++++------------ src/mainboard/siemens/sitemp_g1p1/mptable.c | 2 +- src/mainboard/siemens/sitemp_g1p1/romstage.c | 46 +++---- 5 files changed, 124 insertions(+), 124 deletions(-) (limited to 'src/mainboard/siemens') diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c b/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c index fd731f9e79..b79372aee7 100644 --- a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c +++ b/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c @@ -128,13 +128,13 @@ unsigned long acpi_fill_mcfg(unsigned long current) { struct resource *res; resource_t mmconf_base = EXT_CONF_BASE_ADDRESS; // default - + device_t dev = dev_find_slot(0,PCI_DEVFN(0,0)); // we report mmconf base res = probe_resource(dev, 0x1C); if( res ) mmconf_base = res->base; - + current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *)current, mmconf_base, 0x0, 0x0, 0x1f); // Fix me: should i reserve 255 busses ? return current; @@ -180,7 +180,7 @@ unsigned long write_acpi_tables(unsigned long start) { unsigned long current; int i; - + acpi_rsdp_t *rsdp; acpi_rsdt_t *rsdt; acpi_srat_t *srat; @@ -192,7 +192,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_facs_t *facs; acpi_header_t *dsdt; acpi_header_t *ssdt; - + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ /* Align ACPI tables to 16byte */ @@ -204,14 +204,14 @@ unsigned long write_acpi_tables(unsigned long start) /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; current += sizeof(acpi_rsdp_t); - ALIGN_CURRENT; + ALIGN_CURRENT; rsdt = (acpi_rsdt_t *) current; current += sizeof(acpi_rsdt_t); ALIGN_CURRENT; xsdt = (acpi_xsdt_t *) current; current += sizeof(acpi_xsdt_t); ALIGN_CURRENT; - + /* clear all table memory */ memset((void *)start, 0, current - start); @@ -234,7 +234,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_my_hpet(hpet); current += sizeof(acpi_hpet_t); acpi_add_table(rsdp, hpet); - + /* If we want to use HPET Timers Linux wants an MADT */ printk(BIOS_DEBUG, "ACPI: * MADT\n"); madt = (acpi_madt_t *) current; @@ -247,15 +247,15 @@ unsigned long write_acpi_tables(unsigned long start) mcfg = (acpi_mcfg_t *) current; acpi_create_mcfg(mcfg); current += mcfg->header.length; - acpi_add_table(rsdp, mcfg); - + acpi_add_table(rsdp, mcfg); + /* SSDT */ printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); current += ssdt->length; - acpi_add_table(rsdp, ssdt); - + acpi_add_table(rsdp, ssdt); + /* DSDT */ printk(BIOS_DEBUG, "ACPI: * DSDT\n"); dsdt = (acpi_header_t *)current; @@ -267,7 +267,7 @@ unsigned long write_acpi_tables(unsigned long start) for (i=0; i < dsdt->length; i++) { if (*(u32*)(((u32)dsdt) + i) == 0xBADEAFFE) { printk(BIOS_DEBUG, "ACPI: Patching up globals in DSDT at offset 0x%04x -> 0x%08lx\n", i, current); - *(u32*)(((u32)dsdt) + i) = current; + *(u32*)(((u32)dsdt) + i) = current; break; } } @@ -277,8 +277,8 @@ unsigned long write_acpi_tables(unsigned long start) current += GLOBAL_VARS_SIZE; /* We patched up the DSDT, so we need to recalculate the checksum */ dsdt->checksum = 0; - dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); + dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FADT */ printk(BIOS_DEBUG, "ACPI: * FADT\n"); diff --git a/src/mainboard/siemens/sitemp_g1p1/int15_func.c b/src/mainboard/siemens/sitemp_g1p1/int15_func.c index 0d2da370ff..c6531913ae 100644 --- a/src/mainboard/siemens/sitemp_g1p1/int15_func.c +++ b/src/mainboard/siemens/sitemp_g1p1/int15_func.c @@ -20,7 +20,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #include #include #include @@ -80,7 +80,7 @@ int sbios_INT15_handler(struct eregs *regs) regs->eax &= ~(0xff); regs->ebx &= ~(0xff); printk(BIOS_DEBUG, "Integrated System Information = %x:%x\n", regs->edx, regs->edi); - vgainfo_addr = (regs->edx * 16) + regs->edi; + vgainfo_addr = (regs->edx * 16) + regs->edi; res = 0; break; case 0x89: diff --git a/src/mainboard/siemens/sitemp_g1p1/mainboard.c b/src/mainboard/siemens/sitemp_g1p1/mainboard.c index 2b726f9b17..60a2ee2188 100644 --- a/src/mainboard/siemens/sitemp_g1p1/mainboard.c +++ b/src/mainboard/siemens/sitemp_g1p1/mainboard.c @@ -4,7 +4,7 @@ * Copyright (C) 2008 Advanced Micro Devices, Inc. * Copyright (C) 2010 Siemens AG, Inc. * (Written by Josef Kellermann for Siemens AG, Inc.) - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. @@ -18,7 +18,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #include #include #include @@ -172,7 +172,7 @@ static u32 adt7475_address = ADT7475_ADDRESS; #define adt7475_write_byte(reg, val) \ do_smbus_write_byte(smbus_io_base, adt7475_address, reg, val) - + #define TWOS_COMPL 1 struct __table__{ @@ -284,9 +284,9 @@ static void int15_install(void) /* ############################################################################################# */ /** - * @brief + * @brief * - * @param + * @param */ static u8 calc_trange(u8 t_min, u8 t_max) { @@ -294,7 +294,7 @@ static u8 calc_trange(u8 t_min, u8 t_max) { u8 prev; int i; int diff = t_max - t_min; - + // walk through the trange table for(i = 0, prev = 0; i < sizeof(trange)/sizeof(int); i++) { if( trange[i] < diff ) { @@ -304,7 +304,7 @@ static u8 calc_trange(u8 t_min, u8 t_max) { if( diff == trange[i] ) return i; if( (diff - trange[prev]) < (trange[i] - diff) ) break; // return with last val index return i; - } + } return prev; } @@ -319,7 +319,7 @@ static void cable_detect(void) u8 byte; struct device *sm_dev; struct device *ide_dev; - + /* SMBus Module and ACPI Block (Device 20, Function 0) on SB600 */ printk(BIOS_DEBUG, "%s.\n", __func__); sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); @@ -327,7 +327,7 @@ static void cable_detect(void) byte = pci_read_config8(sm_dev, 0xA9); byte |= (1 << 5); /* Set Gpio9 as input */ pci_write_config8(sm_dev, 0xA9, byte); - + /* IDE Controller (Device 20, Function 1) on SB600 */ ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); @@ -347,14 +347,14 @@ static void cable_detect(void) /** * @brief Detect the ADT7475 device * - * @param + * @param */ - + static const char * adt7475_detect( void ) { int vendid, devid, devid2; const char *name = NULL; - + vendid = adt7475_read_byte(REG_VENDID); devid2 = adt7475_read_byte(REG_DEVID2); if (vendid != 0x41 || /* Analog Devices */ @@ -371,7 +371,7 @@ static const char * adt7475_detect( void ) { name = "adt7476"; else if ((devid2 & 0xfc) == 0x6c) name = "adt7490"; - + return name; } @@ -396,7 +396,7 @@ const struct fan_control case_fan_control_defaults = { static void pm_init( void ) { u16 word; - u8 byte; + u8 byte; device_t sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); /* set SB600 GPIO 64 to GPIO with pull-up */ @@ -423,7 +423,7 @@ static void pm_init( void ) byte = pm_ioread(0x3c); byte &= 0xf3; pm_iowrite(0x3c, byte); - + /* set GPM5 to not wake from s5 */ byte = pm_ioread(0x77); byte &= ~(1 << 5); @@ -433,7 +433,7 @@ static void pm_init( void ) /** * @brief Setup thermal config on SINA Mainboard * - * @param + * @param */ static void set_thermal_config(void) @@ -443,17 +443,17 @@ static void set_thermal_config(void) device_t sm_dev; struct fan_control cpu_fan_control, case_fan_control; const char *name = NULL; - - + + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); smbus_io_base = pci_read_config32(sm_dev, 0x10) & ~(0xf); // get BAR0-Address which holds the SMBUS_IO_BASE - + if( (name = adt7475_detect()) == NULL ) { printk(BIOS_NOTICE, "Couldn't detect an ADT7473/75/76/90 part at %x:%x\n", smbus_io_base, adt7475_address); return; } printk(BIOS_DEBUG, "Found %s part at %x:%x\n", name, smbus_io_base, adt7475_address); - + cpu_fan_control = cpu_fan_control_defaults; case_fan_control = case_fan_control_defaults; @@ -463,7 +463,7 @@ static void set_thermal_config(void) // get all the options needed if( get_option(&byte, "cpu_fan_control") == 0 ) cpu_fan_control.enable = byte ? 1 : 0; - + get_option(&cpu_fan_control.polarity, "cpu_fan_polarity"); get_option(&cpu_fan_control.t_min, "cpu_t_min"); get_option(&cpu_fan_control.t_max, "cpu_t_max"); @@ -471,13 +471,13 @@ static void set_thermal_config(void) get_option(&cpu_fan_control.pwm_max, "cpu_dutycycle_max"); if( get_option(&byte, "chassis_fan_control") == 0) - case_fan_control.enable = byte ? 1 : 0; - get_option(&case_fan_control.polarity, "chassis_fan_polarity"); + case_fan_control.enable = byte ? 1 : 0; + get_option(&case_fan_control.polarity, "chassis_fan_polarity"); get_option(&case_fan_control.t_min, "chassis_t_min"); get_option(&case_fan_control.t_max, "chassis_t_max"); get_option(&case_fan_control.pwm_min, "chassis_dutycycle_min"); get_option(&case_fan_control.pwm_max, "chassis_dutycycle_max"); - + } printk(BIOS_DEBUG, "cpu_fan_control:%s", cpu_fan_control.enable ? "enable" : "disable"); @@ -485,50 +485,50 @@ static void set_thermal_config(void) printk(BIOS_DEBUG, " cpu_t_min:%s", TEMPERATURE_INFO(cpu_fan_control.t_min)); cpu_fan_control.t_min = TEMPERATURE(cpu_fan_control.t_min, cpu_fan_control_defaults.t_min); - + printk(BIOS_DEBUG, " cpu_t_max:%s", TEMPERATURE_INFO(cpu_fan_control.t_max)); cpu_fan_control.t_max = TEMPERATURE(cpu_fan_control.t_max, cpu_fan_control_defaults.t_max); - + printk(BIOS_DEBUG, " cpu_pwm_min:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_min)); cpu_fan_control.pwm_min = DUTYCYCLE(cpu_fan_control.pwm_min, cpu_fan_control_defaults.pwm_min); - + printk(BIOS_DEBUG, " cpu_pwm_max:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_max)); cpu_fan_control.pwm_max = DUTYCYCLE(cpu_fan_control.pwm_max, cpu_fan_control_defaults.pwm_max); - + cpu_fan_control.t_range = calc_trange(cpu_fan_control.t_min, cpu_fan_control.t_max); printk(BIOS_DEBUG, " cpu_t_range:0x%02x\n", cpu_fan_control.t_range); cpu_fan_control.t_range <<= 4; cpu_fan_control.t_range |= (4 << 0); // 35.3Hz - + printk(BIOS_DEBUG, "chassis_fan_control:%s", case_fan_control.enable ? "enable" : "disable"); printk(BIOS_DEBUG, " chassis_fan_polarity:%s", case_fan_control.polarity ? "low" : "high"); printk(BIOS_DEBUG, " chassis_t_min:%s", TEMPERATURE_INFO(case_fan_control.t_min)); case_fan_control.t_min = TEMPERATURE(case_fan_control.t_min, case_fan_control_defaults.t_min); - + printk(BIOS_DEBUG, " chassis_t_max:%s", TEMPERATURE_INFO(case_fan_control.t_max)); case_fan_control.t_max = TEMPERATURE(case_fan_control.t_max, case_fan_control_defaults.t_max); - + printk(BIOS_DEBUG, " chassis_pwm_min:%s", DUTYCYCLE_INFO(case_fan_control.pwm_min)); case_fan_control.pwm_min = DUTYCYCLE(case_fan_control.pwm_min, case_fan_control_defaults.pwm_min); - + printk(BIOS_DEBUG, " chassis_pwm_max:%s", DUTYCYCLE_INFO(case_fan_control.pwm_max)); case_fan_control.pwm_max = DUTYCYCLE(case_fan_control.pwm_max, case_fan_control_defaults.pwm_max); - + case_fan_control.t_range = calc_trange(case_fan_control.t_min, case_fan_control.t_max); printk(BIOS_DEBUG, " case_t_range:0x%02x\n", case_fan_control.t_range); case_fan_control.t_range <<= 4; case_fan_control.t_range |= (4 << 0); // 35.3Hz - + cpu_pwm_conf = (((cpu_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output case_pwm_conf = (((case_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output - cpu_pwm_conf |= cpu_fan_control.enable ? (0 << 5) : (7 << 5); // manual control + cpu_pwm_conf |= cpu_fan_control.enable ? (0 << 5) : (7 << 5); // manual control case_pwm_conf |= case_fan_control.enable ? (1 << 5) : (7 << 5); // local temp - + /* set adt7475 */ adt7475_write_byte(REG_CONFIG1, 0x04); // clear register, bit 2 is read only - + /* Config Register 6: */ adt7475_write_byte(REG_CONFIG6, 0x00); /* Config Register 7 */ @@ -536,14 +536,14 @@ static void set_thermal_config(void) /* Config Register 5: */ /* set Offset 64 format, enable THERM on Remote 1& Local */ - adt7475_write_byte(REG_CONFIG5, TWOS_COMPL ? 0x61 : 0x60); + adt7475_write_byte(REG_CONFIG5, TWOS_COMPL ? 0x61 : 0x60); /* No offset for remote 1 */ adt7475_write_byte(TEMP_OFFSET_REG(0), 0x00); /* No offset for local */ adt7475_write_byte(TEMP_OFFSET_REG(1), 0x00); /* No offset for remote 2 */ adt7475_write_byte(TEMP_OFFSET_REG(2), 0x00); - + /* remote 1 low temp limit */ adt7475_write_byte(TEMP_MIN_REG(0), 0x00); /* remote 1 High temp limit (90C) */ @@ -558,7 +558,7 @@ static void set_thermal_config(void) adt7475_write_byte(TEMP_THERM_REG(0), 0x9f); /* local therm temp limit (95C) */ adt7475_write_byte(TEMP_THERM_REG(1), 0x9f); - + /* PWM 1 configuration register CPU fan controlled by CPU Thermal Diode */ adt7475_write_byte(PWM_CONFIG_REG(0), cpu_pwm_conf); /* PWM 3 configuration register Case fan controlled by ADTxxxx temp */ @@ -576,7 +576,7 @@ static void set_thermal_config(void) } else { adt7475_write_byte(PWM_REG(0), cpu_fan_control.pwm_max); } - + if( case_fan_control.enable ) { /* PWM 2 minimum duty cycle (37%) */ adt7475_write_byte(PWM_MIN_REG(2), case_fan_control.pwm_min); @@ -597,10 +597,10 @@ static void set_thermal_config(void) adt7475_write_byte(0x7d, 0x09); /* Interrupt Mask Register 2 - Mask SMB alert for Therm Conditions, Fan 3 fault, SmbAlert Fan for Therm Timer event */ adt7475_write_byte(0x75, 0x2e); - + /* Config Register 1 Set Start bit */ adt7475_write_byte(0x40, 0x05); - + /* Read status register to clear any old errors */ byte2 = adt7475_read_byte(0x42); byte = adt7475_read_byte(0x41); @@ -611,20 +611,20 @@ static void set_thermal_config(void) } /** - * @brief + * @brief * - * @param + * @param */ static void patch_mmio_nonposted( void ) { - unsigned reg, index; + unsigned reg, index; resource_t rbase, rend; u32 base, limit; struct resource *resource; device_t dev; device_t k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18,1)); - + printk(BIOS_DEBUG,"%s ...\n", __func__); dev = dev_find_slot(1, PCI_DEVFN(5,0)); @@ -637,7 +637,7 @@ static void patch_mmio_nonposted( void ) rbase = (resource->base >> 8) & ~(0xff); /* Get the limit (rounded up) */ rend = (resource_end(resource) >> 8) & ~(0xff); - + printk(BIOS_DEBUG,"%s %x base = %0llx limit = %0llx\n", dev_path(dev), index, rbase, rend); for( reg = 0xb8; reg >= 0x80; reg -= 8 ) { @@ -645,9 +645,9 @@ static void patch_mmio_nonposted( void ) limit = pci_read_config32(k8_f1,reg+4); printk(BIOS_DEBUG," %02x[%08x] %02x[%08x]", reg, base, reg+4, limit); if( ((base & ~(0xff)) == rbase) && ((limit & ~(0xff)) == rend) ) { - limit |= (1 << 7); + limit |= (1 << 7); printk(BIOS_DEBUG, "\nPatching %s %x <- %08x", dev_path(k8_f1), reg, limit); - pci_write_config32(k8_f1, reg+4, limit); + pci_write_config32(k8_f1, reg+4, limit); break; } } @@ -656,22 +656,22 @@ static void patch_mmio_nonposted( void ) } /** - * @brief + * @brief * - * @param + * @param */ - + static void wait_pepp( void ) { int boot_delay = 0; - + if( get_option(&boot_delay, "boot_delay") < 0) boot_delay = 5; - + printk(BIOS_DEBUG, "boot_delay = %d sec\n", boot_delay); if ( boot_delay > 0 ) { init_timer(); - // wait for PEPP-Board + // wait for PEPP-Board printk(BIOS_INFO, "Give PEPP-Board %d sec(s) time to coming up ", boot_delay); while ( boot_delay ) { lapic_write(LAPIC_TMICT, 0xffffffff); @@ -684,9 +684,9 @@ static void wait_pepp( void ) { } /** - * @brief + * @brief * - * @param + * @param */ struct { @@ -700,13 +700,13 @@ struct { {0, PCI_DEVFN(5,0)},{0, PCI_DEVFN(5,2)}, {255,0}, }; - + static void update_subsystemid( device_t dev ) { int i; struct mainboard_config *mb = dev->chip_info; - + dev->subsystem_vendor = 0x110a; if( mb->plx_present ){ dev->subsystem_device = 0x4076; // U1P1 = 0x4076, U1P0 = 0x4077 @@ -725,9 +725,9 @@ static void update_subsystemid( device_t dev ) { } /** - * @brief + * @brief * - * @param + * @param */ static void detect_hw_variant( device_t dev ) { @@ -736,7 +736,7 @@ static void detect_hw_variant( device_t dev ) { struct southbridge_amd_rs690_config *cfg; u32 lc_state, id = 0; struct mainboard_config *mb = dev->chip_info; - + printk(BIOS_INFO, "Scan for PLX device ...\n"); nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); if (!nb_dev) { @@ -769,19 +769,19 @@ static void detect_hw_variant( device_t dev ) { struct device dummy; u32 pci_primary_bus, buses; u16 secondary, subordinate; - - printk(BIOS_DEBUG, "Scan for PLX bridge behind %s[%x]\n", dev_path(dev2), pci_read_config32(dev2, PCI_VENDOR_ID)); + + printk(BIOS_DEBUG, "Scan for PLX bridge behind %s[%x]\n", dev_path(dev2), pci_read_config32(dev2, PCI_VENDOR_ID)); // save the existing primary/secondary/subordinate bus number configuration. secondary = dev2->bus->secondary; subordinate = dev2->bus->subordinate; buses = pci_primary_bus = pci_read_config32(dev2, PCI_PRIMARY_BUS); // Configure the bus numbers for this bridge - // bus number 1 is for internal gfx device, so we start with busnumber 2 + // bus number 1 is for internal gfx device, so we start with busnumber 2 buses &= 0xff000000; buses |= ((2 << 8) | (0xff << 16)); - // setup the buses in device 2 + // setup the buses in device 2 pci_write_config32(dev2,PCI_PRIMARY_BUS, buses); // fake a device descriptor for a device behind device 2 @@ -795,7 +795,7 @@ static void detect_hw_variant( device_t dev ) { /* Have we found something? * Some broken boards return 0 if a slot is empty, but * the expected answer is 0xffffffff - */ + */ if ((id == 0xffffffff) || (id == 0x00000000) || (id == 0x0000ffff) || (id == 0xffff0000)) { printk(BIOS_DEBUG, "%s, bad id 0x%x\n", dev_path(&dummy), id); } else { @@ -810,8 +810,8 @@ static void detect_hw_variant( device_t dev ) { default: break; } - - mb->plx_present = 0; + + mb->plx_present = 0; if( id == PLX_VIDDID ){ printk(BIOS_INFO, "found PLX device\n"); mb->plx_present = 1; @@ -822,7 +822,7 @@ static void detect_hw_variant( device_t dev ) { cfg->gfx_link_width = 4; } return; - } + } } static void smm_lock( void ) @@ -841,16 +841,16 @@ static void smm_lock( void ) * * @param the root device */ - + static void init(device_t dev) { #if CONFIG_PCI_OPTION_ROM_RUN_YABEL == 0 INT15_function_extensions int15_func; #endif - + printk(BIOS_DEBUG, "%s %s[%x/%x] %s\n", dev->chip_ops->name, dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); - + #if CONFIG_PCI_OPTION_ROM_RUN_YABEL == 0 if( get_option(&int15_func.regs.func00_LCD_panel_id, "lcd_panel_id") < 0 ) int15_func.regs.func00_LCD_panel_id = PANEL_TABLE_ID_NO; @@ -870,7 +870,7 @@ static void init(device_t dev) *************************************************/ static void enable_dev(device_t dev) { - + printk(BIOS_INFO, "%s %s[%x/%x] %s\n", dev->chip_ops->name, dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); #if CONFIG_PCI_OPTION_ROM_RUN_YABEL @@ -880,19 +880,19 @@ static void enable_dev(device_t dev) detect_hw_variant(dev); update_subsystemid(dev); - + #if (CONFIG_GFXUMA == 1) { msr_t msr, msr2; - + /* TOP_MEM: the top of DRAM below 4G */ msr = rdmsr(TOP_MEM); printk(BIOS_DEBUG, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", __func__, msr.lo, msr.hi); - + /* TOP_MEM2: the top of DRAM above 4G */ msr2 = rdmsr(TOP_MEM2); - + printk(BIOS_DEBUG, "%s, TOP MEM2: msr.lo = 0x%08x, msr.hi = 0x%08x\n", __func__, msr2.lo, msr2.hi); @@ -915,7 +915,7 @@ static void enable_dev(device_t dev) } uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ - + printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base); @@ -927,20 +927,20 @@ static void enable_dev(device_t dev) #endif wait_pepp(); - dev->ops->init = init; // rest of mainboard init later + dev->ops->init = init; // rest of mainboard init later } /** - * @brief + * @brief * - * @param + * @param */ int add_mainboard_resources(struct lb_memory *mem) { device_t dev; struct resource *res; - + dev = dev_find_slot(0, PCI_DEVFN(0,0)); res = probe_resource(dev, 0x1C); if( res ) { diff --git a/src/mainboard/siemens/sitemp_g1p1/mptable.c b/src/mainboard/siemens/sitemp_g1p1/mptable.c index 9e4a6db028..ba2c1e4c1c 100644 --- a/src/mainboard/siemens/sitemp_g1p1/mptable.c +++ b/src/mainboard/siemens/sitemp_g1p1/mptable.c @@ -38,7 +38,7 @@ static void *smp_write_config_table(void *v) { struct mp_config_table *mc; int isa_bus; - + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LAPIC_ADDR); smp_write_processors(mc); diff --git a/src/mainboard/siemens/sitemp_g1p1/romstage.c b/src/mainboard/siemens/sitemp_g1p1/romstage.c index 09aa1d7f45..b570d4581d 100644 --- a/src/mainboard/siemens/sitemp_g1p1/romstage.c +++ b/src/mainboard/siemens/sitemp_g1p1/romstage.c @@ -18,7 +18,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + #define RC0 (6<<8) #define RC1 (7<<8) @@ -177,7 +177,7 @@ static inline void check_cmos( void ) { outb(0x0a,0x72); i = inb(0x73); i &= ~(1 << 4); - outb(i,0x73); + outb(i,0x73); for (i = 14; i < 128; i++) { #if DUMP_CMOS_RAM @@ -198,7 +198,7 @@ static inline void check_cmos( void ) { /* Now reboot to run with default cmos. */ outb(0x06, 0xcf9); for (;;) asm("hlt"); /* Wait for reset! */ - } + } } // update altcentury @@ -221,7 +221,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) msr_t msr; struct cpuid_result cpuid1; struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); - + if (!cpu_init_detectedx && boot_cpu()) { /* Nothing special needs to be done to find bus 0 */ /* Allow the HT devices to be found */ @@ -237,19 +237,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) enable_rs690_dev8(); // enable CFG access to Dev8, which is the SB P2P Bridge sb600_lpc_init(); -#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 0) - check_cmos(); // rebooting in case of corrupted cmos !!!!! -#endif +#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 0) + check_cmos(); // rebooting in case of corrupted cmos !!!!! +#endif /* it8712f_enable_serial does not use its 1st parameter. */ it8712f_enable_serial(0, CONFIG_TTYS0_BASE); - it8712f_kill_watchdog(); + it8712f_kill_watchdog(); console_init(); #if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 1) - check_cmos(); // rebooting in case of corrupted cmos !!!!! + check_cmos(); // rebooting in case of corrupted cmos !!!!! #endif post_code(0x03); - + /* Halt if there was a built in self test failure */ report_bist_failure(bist); __DEBUG__("bsp_apicid=0x%x\n", bsp_apicid); @@ -270,9 +270,9 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* run _early_setup before soft-reset. */ rs690_early_setup(); sb600_early_setup(); - + post_code(0x04); - + /* Check to see if processor is capable of changing FIDVID */ /* otherwise it will throw a GP# when reading FIDVID_STATUS */ cpuid1 = cpuid(0x80000007); @@ -293,16 +293,16 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } else { __DEBUG__("Changing FIDVID not supported\n"); } - + post_code(0x05); - + needs_reset = optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); rs690_htinit(); __DEBUG__("needs_reset=0x%x\n", needs_reset); - + post_code(0x06); - + if (needs_reset) { __INFO__("ht reset -\n"); soft_reset(); @@ -314,19 +314,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) __DEBUG__("sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", sysinfo->nodes, sysinfo->ctrl, spd_addr); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - + post_code(0x07); - + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - + post_code(0x08); - + rs690_before_pci_init(); // does nothing sb600_before_pci_init(); - -#if CONFIG_USE_OPTION_TABLE + +#if CONFIG_USE_OPTION_TABLE if( read_option(cmos_defaults_loaded, 0) ) - __WARNING__("WARNING: CMOS DEFAULTS LOADED. PLEASE CHECK CMOS OPTION \"cmos_default_loaded\" !\n"); + __WARNING__("WARNING: CMOS DEFAULTS LOADED. PLEASE CHECK CMOS OPTION \"cmos_default_loaded\" !\n"); #endif post_cache_as_ram(); -- cgit v1.2.3