From 6c3912f0bfe659302df084f9eea0e1feb0b3e3b9 Mon Sep 17 00:00:00 2001 From: Mario Scheithauer Date: Fri, 23 Nov 2018 11:02:17 +0100 Subject: siemens/mc_apl5: Adjust the settings for the PCIe root ports This mainboard has four connected PCIe devices. The required root ports are switched on and configured. Change-Id: I82b13e1d245a172762ebd689ae136a762027033f Signed-off-by: Mario Scheithauer Reviewed-on: https://review.coreboot.org/c/29810 Reviewed-by: Werner Zeh Tested-by: build bot (Jenkins) --- .../siemens/mc_apl1/variants/mc_apl5/devicetree.cb | 24 +++++++++++----------- 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'src/mainboard/siemens/mc_apl1/variants') diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl5/devicetree.cb b/src/mainboard/siemens/mc_apl1/variants/mc_apl5/devicetree.cb index f3e8a77143..7dbeea15f1 100644 --- a/src/mainboard/siemens/mc_apl1/variants/mc_apl5/devicetree.cb +++ b/src/mainboard/siemens/mc_apl1/variants/mc_apl5/devicetree.cb @@ -7,12 +7,12 @@ chip soc/intel/apollolake register "sci_irq" = "SCIS_IRQ10" # Disable unused clkreq of PCIe root ports - register "pcie_rp_clkreq_pin[0]" = "3" # PCIe-PCI-Bridge - register "pcie_rp_clkreq_pin[1]" = "2" # FPGA - register "pcie_rp_clkreq_pin[2]" = "0" # MACPHY - register "pcie_rp_clkreq_pin[3]" = "1" # MACPHY - register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED" - register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[0]" = "1" # 14.0 + register "pcie_rp_clkreq_pin[1]" = "CLKREQ_DISABLED" # 14.1 + register "pcie_rp_clkreq_pin[2]" = "0" # 13.0 + register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED" # 13.1 + register "pcie_rp_clkreq_pin[4]" = "2" # 13.2 + register "pcie_rp_clkreq_pin[5]" = "3" # 13.3 # EMMC TX DATA Delay 1 # Refer to EDS-Vol2-22.3. @@ -71,12 +71,12 @@ chip soc/intel/apollolake device pci 0e.0 off end # - Audio device pci 11.0 on end # - ISH device pci 12.0 on end # - SATA - device pci 13.0 on end # - RP 2 - PCIe A 0 - MACPHY - device pci 13.1 on end # - RP 3 - PCIe A 1 - MACPHY - device pci 13.2 off end # - RP 4 - PCIe-A 2 - device pci 13.3 off end # - RP 5 - PCIe-A 3 - device pci 14.0 on end # - RP 0 - PCIe-B 0 - PCIe-PCI-Bridge - device pci 14.1 on end # - RP 1 - PCIe-B 1 - FPGA + device pci 13.0 on end # - RP 2 - PCIe A 0 + device pci 13.1 off end # - RP 3 - PCIe A 1 + device pci 13.2 on end # - RP 4 - PCIe-A 2 + device pci 13.3 on end # - RP 5 - PCIe-A 3 + device pci 14.0 on end # - RP 0 - PCIe-B 0 + device pci 14.1 off end # - RP 1 - PCIe-B 1 device pci 15.0 on end # - XHCI device pci 15.1 off end # - XDCI device pci 16.0 on # - I2C 0 -- cgit v1.2.3