From c583920a748fb8bd7999142433ad08641b06283d Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Tue, 12 Nov 2019 23:48:42 +0100 Subject: nb/intel/i945: Initialize console in bootblock Change-Id: Ic6ea158714998195614a63ee46a057f405de5616 Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/c/coreboot/+/36796 Tested-by: build bot (Jenkins) Reviewed-by: HAOUAS Elyes --- src/mainboard/roda/rk886ex/early_init.c | 131 ++++++++++++++++++++++++++++++++ 1 file changed, 131 insertions(+) create mode 100644 src/mainboard/roda/rk886ex/early_init.c (limited to 'src/mainboard/roda/rk886ex/early_init.c') diff --git a/src/mainboard/roda/rk886ex/early_init.c b/src/mainboard/roda/rk886ex/early_init.c new file mode 100644 index 0000000000..dff1a6fe03 --- /dev/null +++ b/src/mainboard/roda/rk886ex/early_init.c @@ -0,0 +1,131 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "option_table.h" + +/* Override the default lpc decode ranges */ +void mainboard_lpc_decode(void) +{ + int lpt_en = 0; + if (read_option(lpt, 0) != 0) + lpt_en = LPT_LPC_EN; /* enable LPT */ + + pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_IO_DEC, 0x0007); + + pci_update_config16(PCI_DEV(0, 0x1f, 0), LPC_EN, ~LPT_LPC_EN, lpt_en); +} + +/* This box has two superios, so enabling serial becomes slightly excessive. + * We disable a lot of stuff to make sure that there are no conflicts between + * the two. Also set up the GPIOs from the beginning. This is the "no schematic + * but safe anyways" method. + */ +static inline void pnp_enter_ext_func_mode(pnp_devfn_t dev) +{ + unsigned int port = dev >> 8; + outb(0x55, port); +} + +static void pnp_exit_ext_func_mode(pnp_devfn_t dev) +{ + unsigned int port = dev >> 8; + outb(0xaa, port); +} + +void bootblock_mainboard_early_init(void) +{ + pnp_devfn_t dev; + + dev = PNP_DEV(0x2e, 0x00); + + pnp_enter_ext_func_mode(dev); + pnp_write_config(dev, 0x01, 0x94); /* Extended Parport modes */ + pnp_write_config(dev, 0x02, 0x88); /* UART power on */ + pnp_write_config(dev, 0x03, 0x72); /* Floppy */ + pnp_write_config(dev, 0x04, 0x01); /* EPP + SPP */ + pnp_write_config(dev, 0x14, 0x03); /* Floppy */ + pnp_write_config(dev, 0x20, (0x3f0 >> 2)); /* Floppy */ + pnp_write_config(dev, 0x23, (0x378 >> 2)); /* PP base */ + pnp_write_config(dev, 0x24, (0x3f8 >> 2)); /* UART1 base */ + pnp_write_config(dev, 0x25, (0x2f8 >> 2)); /* UART2 base */ + pnp_write_config(dev, 0x26, (2 << 4) | 0); /* FDC + PP DMA */ + pnp_write_config(dev, 0x27, (6 << 4) | 7); /* FDC + PP DMA */ + pnp_write_config(dev, 0x28, (4 << 4) | 3); /* UART1,2 IRQ */ + /* These are the SMI status registers in the SIO: */ + pnp_write_config(dev, 0x30, (0x600 >> 4)); /* Runtime Register Block Base */ + + pnp_write_config(dev, 0x31, 0x00); /* GPIO1 DIR */ + pnp_write_config(dev, 0x32, 0x00); /* GPIO1 POL */ + pnp_write_config(dev, 0x33, 0x40); /* GPIO2 DIR */ + pnp_write_config(dev, 0x34, 0x00); /* GPIO2 POL */ + pnp_write_config(dev, 0x35, 0xff); /* GPIO3 DIR */ + pnp_write_config(dev, 0x36, 0x00); /* GPIO3 POL */ + pnp_write_config(dev, 0x37, 0xe0); /* GPIO4 DIR */ + pnp_write_config(dev, 0x38, 0x00); /* GPIO4 POL */ + pnp_write_config(dev, 0x39, 0x80); /* GPIO4 POL */ + + pnp_exit_ext_func_mode(dev); +} + +void mainboard_late_rcba_config(void) +{ + /* Set up virtual channel 0 */ + + /* Device 1f interrupt pin register */ + RCBA32(D31IP) = 0x00042220; + + /* dev irq route register */ + RCBA16(D31IR) = 0x0232; + RCBA16(D30IR) = 0x3246; + RCBA16(D29IR) = 0x0237; + RCBA16(D28IR) = 0x3201; + RCBA16(D27IR) = 0x3216; + + /* Disable unused devices */ + RCBA32(FD) |= FD_INTLAN; + + /* This should probably go into the ACPI OS Init trap */ + + /* Set up I/O Trap #0 for 0xfe00 (SMIC) */ + RCBA32(0x1e84) = 0x00020001; + RCBA32(0x1e80) = 0x0000fe01; + + /* Set up I/O Trap #3 for 0x800-0x80c (Trap) */ + RCBA32(0x1e9c) = 0x000200f0; + RCBA32(0x1e98) = 0x000c0801; +} + +static void init_artec_dongle(void) +{ + /* Enable 4MB decoding */ + outb(0xf1, 0x88); + outb(0xf4, 0x88); +} + +void mainboard_pre_raminit_config(int s3_resume) +{ + init_artec_dongle(); +} -- cgit v1.2.3