From 2ae2742065a359ce6a45f3b9da7424e8e374b6fa Mon Sep 17 00:00:00 2001 From: Matt DeVillier Date: Thu, 25 May 2017 15:53:29 -0500 Subject: purism/librem13v2: Clean up devicetree - remove unused I2C, serialIO defs - set PL2 override, VR mailbox cmd based on SKL-U ref board, as values copied from google/chell are for SKL-Y Change-Id: I3a138c28d0322df6cb41ec1a845ae31602cb69a7 Signed-off-by: Youness Alaoui Signed-off-by: Matt DeVillier Reviewed-on: https://review.coreboot.org/19941 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/mainboard/purism/librem13v2/devicetree.cb | 27 ++++----------------------- 1 file changed, 4 insertions(+), 23 deletions(-) (limited to 'src/mainboard/purism') diff --git a/src/mainboard/purism/librem13v2/devicetree.cb b/src/mainboard/purism/librem13v2/devicetree.cb index 0defea089e..f345c09f38 100644 --- a/src/mainboard/purism/librem13v2/devicetree.cb +++ b/src/mainboard/purism/librem13v2/devicetree.cb @@ -165,30 +165,11 @@ chip soc/intel/skylake register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port (right) register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port - register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V - - # Must leave UART0 enabled or SD/eMMC will not work as PCI - register "SerialIoDevMode" = "{ - [PchSerialIoIndexI2C0] = PchSerialIoPci, - [PchSerialIoIndexI2C1] = PchSerialIoPci, - [PchSerialIoIndexI2C2] = PchSerialIoDisabled, - [PchSerialIoIndexI2C3] = PchSerialIoDisabled, - [PchSerialIoIndexI2C4] = PchSerialIoPci, - [PchSerialIoIndexI2C5] = PchSerialIoDisabled, - [PchSerialIoIndexSpi0] = PchSerialIoDisabled, - [PchSerialIoIndexSpi1] = PchSerialIoDisabled, - [PchSerialIoIndexUart0] = PchSerialIoPci, - [PchSerialIoIndexUart1] = PchSerialIoDisabled, - [PchSerialIoIndexUart2] = PchSerialIoSkipInit, - }" - - # PL2 override 15W - register "tdp_pl2_override" = "15" - - register "tcc_offset" = "10" # TCC of 90C + # PL2 override 25W + register "tdp_pl2_override" = "25" - # Send an extra VR mailbox command for the supported MPS IMVP8 model - register "SendVrMbxCmd" = "1" + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" device cpu_cluster 0 on device lapic 0 on end -- cgit v1.2.3