From 2276ffa3800e3374b2659a7d03abbe3485318ebc Mon Sep 17 00:00:00 2001 From: Christian Walter Date: Wed, 15 Jul 2020 13:04:40 +0200 Subject: mb/prodrive/hermes: Add multifunction device for UART 2 On CNP-H, only four I2C controllers are available, so PCI devices 19.0 and 19.1 are missing. However, PCI device 19.2 still exists as UART 2. That function 0 is missing means UART 2 can only be used in ACPI mode. Both devices need to be marked as hidden on the devicetree so that the allocator takes UART 2 into account. Change-Id: Ie77198cc0327414b9f88cf15ba4efaddb4f5cca4 Signed-off-by: Christian Walter Reviewed-on: https://review.coreboot.org/c/coreboot/+/43481 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph --- src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'src/mainboard/prodrive') diff --git a/src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb b/src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb index b3649f906e..d1694dce5a 100644 --- a/src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb +++ b/src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb @@ -173,7 +173,10 @@ chip soc/intel/cannonlake device pci 14.3 on end # CNVi wifi end - device pci 19.2 on end # UART #2 + # This device does not have any function on CNP-H, but it needs + # to be here so that the resource allocator is aware of UART 2. + device pci 19.0 hidden end + device pci 19.2 hidden end # UART #2, in ACPI mode device pci 1b.4 on smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "SLOT1" "SlotDataBusWidth4X" -- cgit v1.2.3