From a4432f469a97b4279cb53b79acd5c835e0880981 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20=C5=BBygowski?= Date: Fri, 27 Jul 2018 15:59:51 +0200 Subject: mb/pcengines/apu2: change GPIO setting MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Change GPIO setting to use IOMUX to refer to GPIO by IOMUX register as in BKDG for Family 16h Models 30h-3fh Processor Rev 3.06. Change-Id: Icf4a60acabe65cd7f9985bb3af8bd577764d4196 Signed-off-by: Michał Żygowski Reviewed-on: https://review.coreboot.org/27665 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held --- src/mainboard/pcengines/apu2/gpio_ftns.c | 24 ++++++++++-------- src/mainboard/pcengines/apu2/gpio_ftns.h | 13 ++++++---- src/mainboard/pcengines/apu2/romstage.c | 43 +++++++++++++++++--------------- 3 files changed, 45 insertions(+), 35 deletions(-) (limited to 'src/mainboard/pcengines') diff --git a/src/mainboard/pcengines/apu2/gpio_ftns.c b/src/mainboard/pcengines/apu2/gpio_ftns.c index 12b8f9464b..58dedffe9d 100644 --- a/src/mainboard/pcengines/apu2/gpio_ftns.c +++ b/src/mainboard/pcengines/apu2/gpio_ftns.c @@ -19,19 +19,23 @@ #include "FchPlatform.h" #include "gpio_ftns.h" -void configure_gpio(uintptr_t base_addr, u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting) +void configure_gpio(u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting) { - u8 bdata; - u8 *memptr; + u32 bdata; - memptr = (u8 *)(base_addr + IOMUX_OFFSET + iomux_gpio); - *memptr = iomux_ftn; + bdata = read32((const volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET + + gpio)); + /* out the data value to prevent glitches */ + bdata |= (setting & GPIO_OUTPUT_ENABLE); + write32((volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET + gpio), bdata); - memptr = (u8 *)(base_addr + GPIO_OFFSET + gpio); - bdata = *memptr; - bdata &= 0x07; - bdata |= setting; /* set direction and data value */ - *memptr = bdata; + /* set direction and data value */ + bdata |= (setting & (GPIO_OUTPUT_ENABLE | GPIO_OUTPUT_VALUE + | GPIO_PULL_UP_ENABLE | GPIO_PULL_DOWN_ENABLE)); + write32((volatile void *)(ACPI_MMIO_BASE + GPIO_OFFSET + gpio), bdata); + + write8((volatile void *)(ACPI_MMIO_BASE + IOMUX_OFFSET + iomux_gpio), + iomux_ftn & 0x3); } int get_spd_offset(void) diff --git a/src/mainboard/pcengines/apu2/gpio_ftns.h b/src/mainboard/pcengines/apu2/gpio_ftns.h index e08ee7bcac..05f54148c4 100644 --- a/src/mainboard/pcengines/apu2/gpio_ftns.h +++ b/src/mainboard/pcengines/apu2/gpio_ftns.h @@ -16,7 +16,7 @@ #ifndef GPIO_FTNS_H #define GPIO_FTNS_H -void configure_gpio(uintptr_t base_addr, u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting); +void configure_gpio(u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting); int get_spd_offset(void); #define IOMUX_OFFSET 0xD00 @@ -27,6 +27,7 @@ int get_spd_offset(void); // http://www.pcengines.ch/schema/apu2c.pdf // http://www.pcengines.ch/schema/apu3a.pdf // +#define IOMUX_GPIO_22 0x09 // MODESW (APU5) #define IOMUX_GPIO_32 0x59 // MODESW (SIMSWAP2 on APU5) #define IOMUX_GPIO_33 0x5A // SIMSWAP (SIMSWAP3 on APU5) #define IOMUX_GPIO_49 0x40 // STRAP0 @@ -41,6 +42,7 @@ int get_spd_offset(void); #define IOMUX_GPIO_68 0x48 // PE4_WDIS (SIMSWAP1 on APU5) #define IOMUX_GPIO_71 0x4D // PROCHOT +#define GPIO_22 0x24 // MODESW (APU5) #define GPIO_32 0x164 // MODESW (SIMSWAP2 on APU5) #define GPIO_33 0x168 // SIMSWAP (SIMSWAP3 on APU5) #define GPIO_49 0x100 // STRAP0 @@ -55,9 +57,10 @@ int get_spd_offset(void); #define GPIO_68 0x120 // PE4_WDIS (SIMSWAP1 on APU5) #define GPIO_71 0x134 // PROCHOT -#define GPIO_OUTPUT_ENABLE 23 -#define GPIO_OUTPUT_VALUE 22 -#define GPIO_PULL_DOWN_ENABLE 21 -#define GPIO_PULL_UP_ENABLE 20 +#define GPIO_OUTPUT_ENABLE BIT23 +#define GPIO_OUTPUT_VALUE BIT22 +#define GPIO_PULL_DOWN_ENABLE BIT21 +#define GPIO_PULL_UP_ENABLE BIT20 +#define GPIO_PIN_STS BIT16 #endif /* GPIO_FTNS_H */ diff --git a/src/mainboard/pcengines/apu2/romstage.c b/src/mainboard/pcengines/apu2/romstage.c index e35afc08d6..fec25b4f60 100644 --- a/src/mainboard/pcengines/apu2/romstage.c +++ b/src/mainboard/pcengines/apu2/romstage.c @@ -113,42 +113,45 @@ static void early_lpc_init(void) // // Configure output disabled, value low, pull up/down disabled // + if (IS_ENABLED(CONFIG_BOARD_PCENGINES_APU5)) { + configure_gpio(IOMUX_GPIO_22, Function0, GPIO_22, setting); + } + if (IS_ENABLED(CONFIG_BOARD_PCENGINES_APU2) || IS_ENABLED(CONFIG_BOARD_PCENGINES_APU3) || IS_ENABLED(CONFIG_BOARD_PCENGINES_APU4)) { - configure_gpio(ACPI_MMIO_BASE, - IOMUX_GPIO_32, Function0, GPIO_32, setting); + configure_gpio(IOMUX_GPIO_32, Function0, GPIO_32, setting); } - configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_49, Function2, GPIO_49, setting); - configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_50, Function2, GPIO_50, setting); - configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_71, Function0, GPIO_71, setting); + configure_gpio(IOMUX_GPIO_49, Function2, GPIO_49, setting); + configure_gpio(IOMUX_GPIO_50, Function2, GPIO_50, setting); + configure_gpio(IOMUX_GPIO_71, Function0, GPIO_71, setting); + // // Configure output enabled, value low, pull up/down disabled // - setting = 0x1 << GPIO_OUTPUT_ENABLE; + setting = GPIO_OUTPUT_ENABLE; if (IS_ENABLED(CONFIG_BOARD_PCENGINES_APU3) || IS_ENABLED(CONFIG_BOARD_PCENGINES_APU4)) { - configure_gpio(ACPI_MMIO_BASE, - IOMUX_GPIO_33, Function0, GPIO_33, setting); + configure_gpio(IOMUX_GPIO_33, Function0, GPIO_33, setting); } - configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_57, Function1, GPIO_57, setting); - configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_58, Function1, GPIO_58, setting); - configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_59, Function3, GPIO_59, setting); + configure_gpio(IOMUX_GPIO_57, Function1, GPIO_57, setting); + configure_gpio(IOMUX_GPIO_58, Function1, GPIO_58, setting); + configure_gpio(IOMUX_GPIO_59, Function3, GPIO_59, setting); + // // Configure output enabled, value high, pull up/down disabled // - setting = 0x1 << GPIO_OUTPUT_ENABLE | 0x1 << GPIO_OUTPUT_VALUE; + setting = GPIO_OUTPUT_ENABLE | GPIO_OUTPUT_VALUE; + if (IS_ENABLED(CONFIG_BOARD_PCENGINES_APU5)) { - configure_gpio(ACPI_MMIO_BASE, - IOMUX_GPIO_32, Function0, GPIO_32, setting); - configure_gpio(ACPI_MMIO_BASE, - IOMUX_GPIO_33, Function0, GPIO_33, setting); + configure_gpio(IOMUX_GPIO_32, Function0, GPIO_32, setting); + configure_gpio(IOMUX_GPIO_33, Function0, GPIO_33, setting); } - configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_51, Function2, GPIO_51, setting); - configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_55, Function3, GPIO_55, setting); - configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_64, Function2, GPIO_64, setting); - configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_68, Function0, GPIO_68, setting); + configure_gpio(IOMUX_GPIO_51, Function2, GPIO_51, setting); + configure_gpio(IOMUX_GPIO_55, Function3, GPIO_55, setting); + configure_gpio(IOMUX_GPIO_64, Function2, GPIO_64, setting); + configure_gpio(IOMUX_GPIO_68, Function0, GPIO_68, setting); } -- cgit v1.2.3