From 10575190746b299abfd0b24d4a42f4c47d2f7504 Mon Sep 17 00:00:00 2001 From: Angel Pons Date: Wed, 2 Sep 2020 19:24:59 +0200 Subject: nb/intel/ironlake: Use an enum for `gpu_panel_port_select` The PRM does not describe the relevant bits, but Linux's i915 driver handles these bits the same way for both Ironlake and Sandy Bridge. Change-Id: Ice7412e335752bd7e297ad50f685effcefbd41d2 Signed-off-by: Angel Pons Reviewed-on: https://review.coreboot.org/c/coreboot/+/45036 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber --- src/mainboard/packardbell/ms2290/devicetree.cb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/mainboard/packardbell') diff --git a/src/mainboard/packardbell/ms2290/devicetree.cb b/src/mainboard/packardbell/ms2290/devicetree.cb index 50e648f28f..b57b3feba8 100644 --- a/src/mainboard/packardbell/ms2290/devicetree.cb +++ b/src/mainboard/packardbell/ms2290/devicetree.cb @@ -9,7 +9,7 @@ chip northbridge/intel/ironlake register "gpu_dp_d_hotplug" = "0x04" # Enable Panel as LVDS and configure power delays - register "gpu_panel_port_select" = "0" # LVDS + register "gpu_panel_port_select" = "PANEL_PORT_LVDS" register "gpu_panel_power_cycle_delay" = "6" register "gpu_panel_power_up_delay" = "300" register "gpu_panel_power_down_delay" = "300" -- cgit v1.2.3