From 6dcbe7f5401bca80c738bd2f888ff13f4d59064f Mon Sep 17 00:00:00 2001 From: Carl-Daniel Hailfinger Date: Sun, 12 Apr 2009 21:47:09 +0000 Subject: This patch cleans up the calls to $CC in mainboard Config.lb files. They now all have the same parameter order. action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -nostdinc -nostdlib -fno-builtin -Wall -Os -c -S $(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -o $@" The idea behind this parameter order is: - *FLAGS at the beginning. - Use a common set of *FLAGS. - Include files and directories listed afterwards. - nostdinc, nostdlib, no-builtin tell the compiler this is standalone code. - Warnings. They do not influence source or compilation. - Compilation strategy (small) and output mode (asm or binary). - File to be compiled. - Output name. - $(DEBUG_CFLAGS) and -S are only used for asm output. Other changes in this patch: - src/supermicro/h8dme/Config.lb now uses $DEBUG_CFLAGS instead of hardcoding the respective flags. - $DEBUG_CFLAGS was added to asm outputting $CC calls: supermicro/h8dme/Config.lb lippert/roadrunner-lx/Config.lb - $DISTRO_CFLAGS was added to some $CC calls in: iwill/dk8_htx/Config.lb (CAR AP code) supermicro/h8dmr/Config.lb (CAR AP code) supermicro/h8dme/Config.lb (CAR AP code) gigabyte/m57sli/Config.lb (CAR AP code) gigabyte/ga_2761gxdk/Config.lb (CAR AP code) amd/serengeti_cheetah_fam10/Config.lb (everywhere) msi/ms7135/Config.lb (everywhere) nvidia/l1_2pvv/Config.lb (CAR AP code) -$CFLAGS was added to all $CC calls in: amd/db800/Config.lb amd/dbm690t/Config.lb amd/norwich/Config.lb amd/pistachio/Config.lb amd/serengeti_cheetah/Config.lb amd/serengeti_cheetah_fam10/Config.lb arima/hdama/Config.lb artecgroup/dbe61/Config.lb asus/a8n_e/Config.lb asus/a8v-e_se/Config.lb asus/m2v-mx_se/Config.lb broadcom/blast/Config.lb digitallogic/msm800sev/Config.lb gigabyte/ga_2761gxdk/Config.lb gigabyte/m57sli/Config.lb ibm/e325/Config.lb ibm/e326/Config.lb iei/pcisa-lx-800-r10/Config.lb iwill/dk8_htx/Config.lb iwill/dk8s2/Config.lb iwill/dk8x/Config.lb kontron/986lcd-m/Config.lb lippert/roadrunner-lx/Config.lb lippert/spacerunner-lx/Config.lb msi/ms7135/Config.lb msi/ms7260/Config.lb msi/ms9185/Config.lb msi/ms9282/Config.lb newisys/khepri/Config.lb nvidia/l1_2pvv/Config.lb pcengines/alix1c/Config.lb sunw/ultra40/Config.lb supermicro/h8dme/Config.lb supermicro/h8dmr/Config.lb technexion/tim8690/Config.lb tyan/s2735/Config.lb tyan/s2850/Config.lb tyan/s2875/Config.lb tyan/s2880/Config.lb tyan/s2881/Config.lb tyan/s2882/Config.lb tyan/s2885/Config.lb tyan/s2891/Config.lb tyan/s2892/Config.lb tyan/s2895/Config.lb tyan/s2912/Config.lb tyan/s2912_fam10/Config.lb tyan/s4880/Config.lb tyan/s4882/Config.lb - Use $@ wherever appropriate. - Kill that evil CACHE_AS_RAM_AUTO_C variable. - Trailing whitespace fixups on lines which were touched anyway. We now only have 6 remaining different calls to $CC whereas before there were 20. If I am allowed to rename src/mainboard/kontron/986lcd-m/auto.c to src/mainboard/kontron/986lcd-m/cache_as_ram_auto.c, we're down to 4 different calls. If we can decide on the use of $CPU_OPT, we are down to 3 different calls. One additional point I'd like to clear up: if ASSEMBLER_DEBUG makedefine DEBUG_CFLAGS := -g -dA -fverbose-asm end "-dA -fverbose-asm" is only useful for asm output. For these flags, DEBUG_CFLAGS is a total misnomer. What about calling them DEBUG_ASMCFLAGS or somesuch? "-g" should be controllable by a separate switch. It is useful even for object code. The following targets are broken by this patch because they contain implicit declarations, but the error did not trigger due to missing CFLAGS: amd/serengeti_cheetah asus/a8v-e_se asus/m2v-mx_se digitallogic/msm800sev pcengines/alix1c supermicro/h8dme supermicro/h8dmr Signed-off-by: Carl-Daniel Hailfinger Acked-by: Ronald G. Minnich Acked-by: Peter Stuge git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4097 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/msi/ms9185/Config.lb | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'src/mainboard/msi/ms9185') diff --git a/src/mainboard/msi/ms9185/Config.lb b/src/mainboard/msi/ms9185/Config.lb index 99a6ce5e97..27d2ea5eb5 100644 --- a/src/mainboard/msi/ms9185/Config.lb +++ b/src/mainboard/msi/ms9185/Config.lb @@ -81,14 +81,14 @@ end # compile cache_as_ram.c to auto.o makerule ./cache_as_ram_auto.o depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -nostdinc -nostdlib -fno-builtin -Wall -Os -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" end else #compile cache_as_ram.c to auto.inc makerule ./cache_as_ram_auto.inc depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall $(DEBUG_CFLAGS) -c -S -o $@" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -nostdinc -nostdlib -fno-builtin -Wall -Os -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end -- cgit v1.2.3