From e56f0c7cab77b89a750b4a3f7f380b1a10cd0d1d Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Tue, 1 Nov 2022 23:17:37 +0100 Subject: mb/*/*: Remove AMD FAMILY15TN boards These boards use the LEGACY_SMP_INIT which is to be deprecated after release 4.18. Change-Id: I9efb5cb1149cc4cf6337c47af8a2f4c4b55f4368 Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/c/coreboot/+/69111 Tested-by: build bot (Jenkins) Reviewed-by: Elyes Haouas Reviewed-by: Angel Pons --- src/mainboard/msi/ms7721/devicetree.cb | 156 --------------------------------- 1 file changed, 156 deletions(-) delete mode 100644 src/mainboard/msi/ms7721/devicetree.cb (limited to 'src/mainboard/msi/ms7721/devicetree.cb') diff --git a/src/mainboard/msi/ms7721/devicetree.cb b/src/mainboard/msi/ms7721/devicetree.cb deleted file mode 100644 index 6d2c1a486a..0000000000 --- a/src/mainboard/msi/ms7721/devicetree.cb +++ /dev/null @@ -1,156 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -chip northbridge/amd/agesa/family15tn/root_complex - - device cpu_cluster 0 on - chip cpu/amd/agesa/family15tn - device lapic 10 on end - end - end - - device domain 0 on - subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/agesa/family15tn - device pci 0.0 on end # Root Complex - device pci 0.2 on end # IOMMU - device pci 1.0 on end # Internal Graphics P2P bridge 0x990e - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe x16 - device pci 3.0 off end # - - device pci 4.0 on end # PCIE Realtek LAN - device pci 5.0 on end # PCIE x1 (1) - device pci 6.0 on end # PCIE x1 (2) - device pci 7.0 off end # LAN - device pci 8.0 off end # NB/SB Link P2P bridge - end #chip northbridge/amd/agesa/family15tn - - chip southbridge/amd/agesa/hudson - device pci 10.0 on end # USB XHCI - device pci 10.1 on end # USB XHCI - device pci 11.0 on end # SATA - device pci 12.0 on end # USB OHCI - device pci 12.2 on end # USB EHCI - device pci 13.0 on end # USB OHCI - device pci 13.2 on end # USB EHCI - device pci 14.0 on end # SMBUS - device pci 14.1 off end # IDE 0x439c - device pci 14.2 on end # Azalia (Audio) - device pci 14.3 on # LPC 0x439d - chip superio/fintek/f71869ad - register "multi_function_register_1" = "0x01" - register "multi_function_register_2" = "0x0f" - register "multi_function_register_3" = "0x2f" - register "multi_function_register_4" = "0x04" - register "multi_function_register_5" = "0x3e" - - # HWM configuration registers - register "hwm_smbus_address" = "0x98" - register "hwm_smbus_control_reg" = "0x02" - register "hwm_fan_type_sel_reg" = "0x00" - register "hwm_fan1_temp_adj_rate_reg" = "0x33" - register "hwm_fan_mode_sel_reg" = "0x07" - register "hwm_fan1_idx_rpm_mode" = "0x0e" - register "hwm_fan1_seg1_speed_count" = "0xff" - register "hwm_fan1_seg2_speed_count" = "0x0e" - register "hwm_fan1_seg3_speed_count" = "0x07" - register "hwm_fan1_temp_map_sel" = "0x8c" - register "hwm_temp_sensor_type" = "0x08" - - device pnp 4e.00 off end - device pnp 4e.01 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.02 off # COM2 (Level converter not populated, but may be usable?) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.03 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 5 - drq 0x74 = 3 - irq 0xf0 = 0x44 # PRT Mode Select Register - end - device pnp 4e.04 on # Hardware Monitor - io 0x60 = 0x225 # Fintek datasheet says 0x295. - irq 0x70 = 0 - end - device pnp 4e.05 on # KBC - io 0x60 = 0x060 - irq 0x70 = 1 # Keyboard IRQ - irq 0x72 = 12 # Mouse IRQ - end - device pnp 4e.06 on # GPIO - # ! GPIO config is disabled because the code in romstage.c - # ! has already taken care of it - #io 0x60 = 0xa00 - #irq 0xe0 = 0x04 # GPIO1 output - #irq 0xe1 = 0xff # GPIO1 output data - #irq 0xe3 = 0x04 # GPIO1 drive enable - #irq 0xe4 = 0x00 # GPIO1 PME enable - #irq 0xe5 = 0x00 # GPIO1 input detect select - #irq 0xe6 = 0x40 # GPIO1 event status - - #irq 0xd0 = 0x00 # GPIO2 output - #irq 0xd1 = 0xff # GPIO2 output data - #irq 0xd3 = 0x00 # GPIO2 drive enable - - #irq 0xc0 = 0x00 # GPIO3 output - #irq 0xc1 = 0xff # GPIO3 output data - - #irq 0xb0 = 0x04 # GPIO4 output - #irq 0xb1 = 0x04 # GPIO4 output data - #irq 0xb3 = 0x04 # GPIO4 drive enable - #irq 0xb4 = 0x00 # GPIO4 PME enable - #irq 0xb5 = 0x00 # GPIO4 input detect select - #irq 0xb6 = 0x00 # GPIO4 event status - - #irq 0xa0 = 0x00 # GPIO5 output - #irq 0xa1 = 0x1f # GPIO5 output data - #irq 0xa3 = 0x00 # GPIO5 drive enable - #irq 0xa4 = 0x00 # GPIO5 PME enable - #irq 0xa5 = 0xff # GPIO5 input detect select - #irq 0xa6 = 0xe0 # GPIO5 event status - - #irq 0x90 = 0x00 # GPIO6 output - #irq 0x91 = 0xff # GPIO6 output data - #irq 0x93 = 0x00 # GPIO6 drive enable - - #irq 0x80 = 0x00 # GPIO7 output - #irq 0x81 = 0xff # GPIO7 output data - #irq 0x83 = 0x00 # GPIO7 drive enable - end - - device pnp 4e.07 on end # WDT - device pnp 4e.08 off end # CIR - device pnp 4e.0a on end # PME - end # f71869ad - end #device pci 14.3 # LPC - device pci 14.4 on end # PCI 0x4384 (PCI slot on board) - device pci 14.5 on end # USB OHCI - device pci 14.6 off end # Gec - device pci 14.7 off end # SD - device pci 15.0 off end # unused - device pci 15.1 off end # unused - device pci 15.2 off end # unused - device pci 15.3 off end # unused - - end #chip southbridge/amd/agesa/hudson - - chip northbridge/amd/agesa/family15tn - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - - register "spdAddrLookup" = " - { - { {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses - }" - end - - end #domain -end #chip northbridge/amd/agesa/family15tn/root_complex -- cgit v1.2.3