From a5aad2ed68690d748c650f69a2e39f91a7b02608 Mon Sep 17 00:00:00 2001 From: Elyes HAOUAS Date: Mon, 19 Sep 2016 09:47:16 -0600 Subject: src/mainboard/lenovo-winent: Add space around operators Change-Id: Iab2a879ebdea9d93ef5eb7e3abf875036c1e1cb4 Signed-off-by: Elyes HAOUAS Reviewed-on: https://review.coreboot.org/16641 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi --- src/mainboard/lippert/frontrunner-af/mainboard.c | 4 ++-- src/mainboard/lippert/frontrunner/irq_tables.c | 8 ++++---- src/mainboard/lippert/hurricane-lx/mainboard.c | 2 +- src/mainboard/lippert/hurricane-lx/romstage.c | 4 ++-- src/mainboard/lippert/literunner-lx/mainboard.c | 2 +- src/mainboard/lippert/literunner-lx/romstage.c | 6 +++--- src/mainboard/lippert/roadrunner-lx/mainboard.c | 2 +- src/mainboard/lippert/roadrunner-lx/romstage.c | 6 +++--- src/mainboard/lippert/spacerunner-lx/devicetree.cb | 2 +- src/mainboard/lippert/spacerunner-lx/mainboard.c | 2 +- src/mainboard/lippert/spacerunner-lx/romstage.c | 6 +++--- src/mainboard/lippert/toucan-af/mainboard.c | 4 ++-- 12 files changed, 24 insertions(+), 24 deletions(-) (limited to 'src/mainboard/lippert') diff --git a/src/mainboard/lippert/frontrunner-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/mainboard.c index 79c093fb81..a8cf5c5dea 100644 --- a/src/mainboard/lippert/frontrunner-af/mainboard.c +++ b/src/mainboard/lippert/frontrunner-af/mainboard.c @@ -31,7 +31,7 @@ /* Init SIO GPIOs. */ #define SIO_RUNTIME_BASE 0x0E00 -static const u16 sio_init_table[] = { // hi=offset, lo=value +static const u16 sio_init_table[] = { // hi = offset, lo = value 0x4BA0, // GP1x: COM1/2 control = RS232, no term, max 115200 0x2300, // GP10: COM1 termination = push/pull output 0x2400, // GP11: COM2 termination = push/pull output @@ -70,7 +70,7 @@ static const u16 sio_init_table[] = { // hi=offset, lo=value static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data) { __outbyte(SMB0_STATUS, 0x1E); // clear error status - __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction=out + __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction = out __outbyte(SMB0_HOSTCMD, command); // or destination offset __outbyte(SMB0_DATA0, length); // sent before data __inbyte(SMB0_CONTROL); // reset block data array diff --git a/src/mainboard/lippert/frontrunner/irq_tables.c b/src/mainboard/lippert/frontrunner/irq_tables.c index 2e0d9d624a..a8f7e364f7 100644 --- a/src/mainboard/lippert/frontrunner/irq_tables.c +++ b/src/mainboard/lippert/frontrunner/irq_tables.c @@ -23,7 +23,7 @@ static const struct irq_routing_table intel_irq_routing_table = { PIRQ_VERSION, /* u16 version */ 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ 0x00, /* Where the interrupt router lies (bus) */ - (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ + (0x12 << 3)|0x0, /* Where the interrupt router lies (dev) */ 0x800, /* IRQs devoted exclusively to PCI usage */ 0x1078, /* Vendor */ 0x2, /* Device */ @@ -31,9 +31,9 @@ static const struct irq_routing_table intel_irq_routing_table = { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ 0xdf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x0e<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x0f<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0}, + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x0e << 3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, + {0x00,(0x0f << 3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0}, } }; unsigned long write_pirq_routing_table(unsigned long addr) diff --git a/src/mainboard/lippert/hurricane-lx/mainboard.c b/src/mainboard/lippert/hurricane-lx/mainboard.c index ffd20d00cf..3d32113858 100644 --- a/src/mainboard/lippert/hurricane-lx/mainboard.c +++ b/src/mainboard/lippert/hurricane-lx/mainboard.c @@ -31,7 +31,7 @@ #define SIO_GP1X_CONFIG 0x00 #endif -static const u16 ec_init_table[] = { /* hi=data, lo=index */ +static const u16 ec_init_table[] = { /* hi = data, lo = index */ 0x1900, /* Enable monitoring */ 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ 0x805C, /* Unlock zero adjust */ diff --git a/src/mainboard/lippert/hurricane-lx/romstage.c b/src/mainboard/lippert/hurricane-lx/romstage.c index 0c9e03a4cd..7e3288f81e 100644 --- a/src/mainboard/lippert/hurricane-lx/romstage.c +++ b/src/mainboard/lippert/hurricane-lx/romstage.c @@ -76,7 +76,7 @@ static int smc_send_config(unsigned char config_data) #include "cpu/amd/geode_lx/syspreinit.c" #include "cpu/amd/geode_lx/msrinit.c" -static const u16 sio_init_table[] = { // hi=data, lo=index +static const u16 sio_init_table[] = { // hi = data, lo = index 0x042C, // disable ATXPG; VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 enabled 0x1423, // don't delay PoWeROK1/2 0x9072, // watchdog triggers PWROK, counts seconds @@ -84,7 +84,7 @@ static const u16 sio_init_table[] = { // hi=data, lo=index 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 #endif 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xBF27, 0xFF28, 0x2D29, // (GP36=FAN_CTL3 (PWM), GP23,22,16,15=SPI, GP13=PWROK1) + 0xBF27, 0xFF28, 0x2D29, // (GP36 = FAN_CTL3 (PWM), GP23,22,16,15 = SPI, GP13 = PWROK1) 0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, WD_ACTIVE 0x06C8, // config GP12,11 as output, GP10 as input diff --git a/src/mainboard/lippert/literunner-lx/mainboard.c b/src/mainboard/lippert/literunner-lx/mainboard.c index 1a569e2b58..e4084b5cbc 100644 --- a/src/mainboard/lippert/literunner-lx/mainboard.c +++ b/src/mainboard/lippert/literunner-lx/mainboard.c @@ -34,7 +34,7 @@ /* Bit0 enables COM3's transceiver, bit1 disables the RS485 receiver (e.g. for IR). */ #define SIO_GP2X_CONFIG 0x00 -static const u16 ec_init_table[] = { /* hi=data, lo=index */ +static const u16 ec_init_table[] = { /* hi = data, lo = index */ 0x1900, /* Enable monitoring */ 0x3050, /* VIN4,5 enabled */ 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ diff --git a/src/mainboard/lippert/literunner-lx/romstage.c b/src/mainboard/lippert/literunner-lx/romstage.c index efe322c019..2f6aa469a0 100644 --- a/src/mainboard/lippert/literunner-lx/romstage.c +++ b/src/mainboard/lippert/literunner-lx/romstage.c @@ -115,7 +115,7 @@ static int smc_send_config(unsigned char config_data) #include "cpu/amd/geode_lx/syspreinit.c" #include "cpu/amd/geode_lx/msrinit.c" -static const u16 sio_init_table[] = { // hi=data, lo=index +static const u16 sio_init_table[] = { // hi = data, lo = index 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal 0x1423, // don't delay PoWeROK1/2 0x9072, // watchdog triggers PWROK, counts seconds @@ -123,7 +123,7 @@ static const u16 sio_init_table[] = { // hi=data, lo=index 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 #endif 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xFF27, 0xDF28, 0x2729, // (GP45=SUSB, GP23,22,16,15=SPI, GP13=PWROK1) + 0xFF27, 0xDF28, 0x2729, // (GP45 = SUSB, GP23,22,16,15 = SPI, GP13 = PWROK1) 0x66B8, 0x0FB9, // enable pullups on SPI, RS485_EN, COM3_R/TX_EN 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED 0x03C1, // enable Simple-I/O for GP21-20= COM3_RX_EN,TX_EN @@ -131,7 +131,7 @@ static const u16 sio_init_table[] = { // hi=data, lo=index 0x07C8, // config GP12-10 as output 0x03C9, // config GP21-20 as output 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x08F8, // map GP LED Blinking 1 to GP10=LIVE_LED (deactivate Simple I/O to use) + 0x08F8, // map GP LED Blinking 1 to GP10 = LIVE_LED (deactivate Simple I/O to use) }; /* Early mainboard specific GPIO setup. */ diff --git a/src/mainboard/lippert/roadrunner-lx/mainboard.c b/src/mainboard/lippert/roadrunner-lx/mainboard.c index cd83768598..1d35ebe464 100644 --- a/src/mainboard/lippert/roadrunner-lx/mainboard.c +++ b/src/mainboard/lippert/roadrunner-lx/mainboard.c @@ -31,7 +31,7 @@ #define SIO_GP1X_CONFIG 0x20 #endif -static const u16 ec_init_table[] = { /* hi=data, lo=index */ +static const u16 ec_init_table[] = { /* hi = data, lo = index */ 0x1900, /* Enable monitoring */ 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ 0x805C, /* Unlock zero adjust */ diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c index d70e2c1835..7e0e2a5e01 100644 --- a/src/mainboard/lippert/roadrunner-lx/romstage.c +++ b/src/mainboard/lippert/roadrunner-lx/romstage.c @@ -52,7 +52,7 @@ int spd_read_byte(unsigned int device, unsigned int address) #include "cpu/amd/geode_lx/syspreinit.c" #include "cpu/amd/geode_lx/msrinit.c" -static const u16 sio_init_table[] = { // hi=data, lo=index +static const u16 sio_init_table[] = { // hi = data, lo = index 0x1E2C, // disable ATXPG; VIN6,FAN4/5,VIN3 enabled, VIN7 internal 0x1423, // don't delay PoWeROK1/2 - triggers 2nd reset 0x9072, // watchdog triggers PWROK, counts seconds @@ -60,13 +60,13 @@ static const u16 sio_init_table[] = { // hi=data, lo=index 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 #endif 0xBF25, 0x372A, 0xF326, // select GPIO function for most pins - 0xBF27, 0xFF28, 0x2529, // (GP36=FAN_CTL3, GP13=PWROK1) + 0xBF27, 0xFF28, 0x2529, // (GP36 = FAN_CTL3, GP13 = PWROK1) 0x46B8, 0x0CB9, // enable pullups on RS485_EN 0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1 0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector) 0x26C8, // config GP15,12,11 as output; GP14 as input 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x0DF8, // map GP LED Blinking 1 to GP15=LIVE_LED (deactivate Simple-I/O to use) + 0x0DF8, // map GP LED Blinking 1 to GP15 = LIVE_LED (deactivate Simple-I/O to use) }; /* Early mainboard specific GPIO setup. */ diff --git a/src/mainboard/lippert/spacerunner-lx/devicetree.cb b/src/mainboard/lippert/spacerunner-lx/devicetree.cb index 8619e84b6a..5f5b15bbb6 100644 --- a/src/mainboard/lippert/spacerunner-lx/devicetree.cb +++ b/src/mainboard/lippert/spacerunner-lx/devicetree.cb @@ -21,7 +21,7 @@ chip northbridge/amd/lx register "com2_enable" = "0" register "com2_address" = "0x2E8" register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0x80007B00" # Audio: 1<<31 + Device 0x0F<<11 + Function 3<<8 + register "unwanted_vpci[0]" = "0x80007B00" # Audio: 1 << 31 + Device 0x0F << 11 + Function 3 << 8 register "unwanted_vpci[1]" = "0" # End of list has a zero device pci 8.0 on end # Slot4 device pci 9.0 on end # Slot3 diff --git a/src/mainboard/lippert/spacerunner-lx/mainboard.c b/src/mainboard/lippert/spacerunner-lx/mainboard.c index 4decd0e95e..b0bc74e9f6 100644 --- a/src/mainboard/lippert/spacerunner-lx/mainboard.c +++ b/src/mainboard/lippert/spacerunner-lx/mainboard.c @@ -31,7 +31,7 @@ #define SIO_GP1X_CONFIG 0x01 #endif -static const u16 ec_init_table[] = { /* hi=data, lo=index */ +static const u16 ec_init_table[] = { /* hi = data, lo = index */ 0x1900, /* Enable monitoring */ 0x3050, /* VIN4,5 enabled */ 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ diff --git a/src/mainboard/lippert/spacerunner-lx/romstage.c b/src/mainboard/lippert/spacerunner-lx/romstage.c index b3a13ad4b2..85503c547d 100644 --- a/src/mainboard/lippert/spacerunner-lx/romstage.c +++ b/src/mainboard/lippert/spacerunner-lx/romstage.c @@ -116,7 +116,7 @@ static int smc_send_config(unsigned char config_data) #include "cpu/amd/geode_lx/syspreinit.c" #include "cpu/amd/geode_lx/msrinit.c" -static const u16 sio_init_table[] = { // hi=data, lo=index +static const u16 sio_init_table[] = { // hi = data, lo = index 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal 0x1423, // don't delay PoWeROK1/2 0x9072, // watchdog triggers PWROK, counts seconds @@ -124,12 +124,12 @@ static const u16 sio_init_table[] = { // hi=data, lo=index 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 #endif 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xFF27, 0xDF28, 0x2729, // (GP45=SUSB, GP23,22,16,15=SPI, GP13=PWROK1) + 0xFF27, 0xDF28, 0x2729, // (GP45 = SUSB, GP23,22,16,15 = SPI, GP13 = PWROK1) 0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED 0x07C8, // config GP12-10 as output 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x08F8, // map GP LED Blinking 1 to GP10=LIVE_LED (deactivate Simple I/O to use) + 0x08F8, // map GP LED Blinking 1 to GP10 = LIVE_LED (deactivate Simple I/O to use) }; /* Early mainboard specific GPIO setup. */ diff --git a/src/mainboard/lippert/toucan-af/mainboard.c b/src/mainboard/lippert/toucan-af/mainboard.c index b9c532f4d8..6b51fd2e97 100644 --- a/src/mainboard/lippert/toucan-af/mainboard.c +++ b/src/mainboard/lippert/toucan-af/mainboard.c @@ -39,7 +39,7 @@ static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data) { __outbyte(SMB0_STATUS, 0x1E); // clear error status - __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction=out + __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction = out __outbyte(SMB0_HOSTCMD, command); // or destination offset __outbyte(SMB0_DATA0, length); // sent before data __inbyte(SMB0_CONTROL); // reset block data array @@ -96,7 +96,7 @@ static void init(struct device *dev) * effect a power cycle and switch to the alternate BIOS chip. * Should be done as late as possible. */ printk(BIOS_INFO, "Sending BIOS alive message\n"); - const u8 i_am_alive[] = { 0x03 }; //bit2=SEL_DP0: 0=DDI2, 1=LVDS + const u8 i_am_alive[] = { 0x03 }; //bit2 = SEL_DP0: 0 = DDI2, 1 = LVDS if ((i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive))) printk(BIOS_ERR, "smb_write_blk failed: %d\n", i); -- cgit v1.2.3