From 64aa881263fa3fdec827a3f7adf04b138ab82ff1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ky=C3=B6sti=20M=C3=A4lkki?= Date: Mon, 4 Jun 2018 06:49:00 +0300 Subject: amd/geode_lx: Remove most boards MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is active work to convert remaining two boards, PC Engines alix1c and alix2d, to EARLY_CBMEM_INIT. Change-Id: I87e3963af7ef719e9fa2a8b0df34a896265905f0 Signed-off-by: Kyösti Mälkki Reviewed-on: https://review.coreboot.org/26824 Tested-by: build bot (Jenkins) --- src/mainboard/lippert/hurricane-lx/Kconfig | 56 ------- src/mainboard/lippert/hurricane-lx/Kconfig.name | 2 - src/mainboard/lippert/hurricane-lx/board_info.txt | 6 - src/mainboard/lippert/hurricane-lx/devicetree.cb | 90 ---------- src/mainboard/lippert/hurricane-lx/irq_tables.c | 72 -------- src/mainboard/lippert/hurricane-lx/mainboard.c | 83 ---------- src/mainboard/lippert/hurricane-lx/romstage.c | 144 ---------------- src/mainboard/lippert/literunner-lx/Kconfig | 50 ------ src/mainboard/lippert/literunner-lx/Kconfig.name | 2 - src/mainboard/lippert/literunner-lx/board_info.txt | 6 - src/mainboard/lippert/literunner-lx/devicetree.cb | 87 ---------- src/mainboard/lippert/literunner-lx/irq_tables.c | 69 -------- src/mainboard/lippert/literunner-lx/mainboard.c | 87 ---------- src/mainboard/lippert/literunner-lx/romstage.c | 182 --------------------- src/mainboard/lippert/roadrunner-lx/Kconfig | 42 ----- src/mainboard/lippert/roadrunner-lx/Kconfig.name | 2 - src/mainboard/lippert/roadrunner-lx/board_info.txt | 6 - src/mainboard/lippert/roadrunner-lx/devicetree.cb | 89 ---------- src/mainboard/lippert/roadrunner-lx/irq_tables.c | 71 -------- src/mainboard/lippert/roadrunner-lx/mainboard.c | 77 --------- src/mainboard/lippert/roadrunner-lx/romstage.c | 110 ------------- src/mainboard/lippert/spacerunner-lx/Kconfig | 49 ------ src/mainboard/lippert/spacerunner-lx/Kconfig.name | 2 - .../lippert/spacerunner-lx/board_info.txt | 6 - src/mainboard/lippert/spacerunner-lx/devicetree.cb | 90 ---------- src/mainboard/lippert/spacerunner-lx/irq_tables.c | 71 -------- src/mainboard/lippert/spacerunner-lx/mainboard.c | 82 ---------- src/mainboard/lippert/spacerunner-lx/romstage.c | 181 -------------------- 28 files changed, 1814 deletions(-) delete mode 100644 src/mainboard/lippert/hurricane-lx/Kconfig delete mode 100644 src/mainboard/lippert/hurricane-lx/Kconfig.name delete mode 100644 src/mainboard/lippert/hurricane-lx/board_info.txt delete mode 100644 src/mainboard/lippert/hurricane-lx/devicetree.cb delete mode 100644 src/mainboard/lippert/hurricane-lx/irq_tables.c delete mode 100644 src/mainboard/lippert/hurricane-lx/mainboard.c delete mode 100644 src/mainboard/lippert/hurricane-lx/romstage.c delete mode 100644 src/mainboard/lippert/literunner-lx/Kconfig delete mode 100644 src/mainboard/lippert/literunner-lx/Kconfig.name delete mode 100644 src/mainboard/lippert/literunner-lx/board_info.txt delete mode 100644 src/mainboard/lippert/literunner-lx/devicetree.cb delete mode 100644 src/mainboard/lippert/literunner-lx/irq_tables.c delete mode 100644 src/mainboard/lippert/literunner-lx/mainboard.c delete mode 100644 src/mainboard/lippert/literunner-lx/romstage.c delete mode 100644 src/mainboard/lippert/roadrunner-lx/Kconfig delete mode 100644 src/mainboard/lippert/roadrunner-lx/Kconfig.name delete mode 100644 src/mainboard/lippert/roadrunner-lx/board_info.txt delete mode 100644 src/mainboard/lippert/roadrunner-lx/devicetree.cb delete mode 100644 src/mainboard/lippert/roadrunner-lx/irq_tables.c delete mode 100644 src/mainboard/lippert/roadrunner-lx/mainboard.c delete mode 100644 src/mainboard/lippert/roadrunner-lx/romstage.c delete mode 100644 src/mainboard/lippert/spacerunner-lx/Kconfig delete mode 100644 src/mainboard/lippert/spacerunner-lx/Kconfig.name delete mode 100644 src/mainboard/lippert/spacerunner-lx/board_info.txt delete mode 100644 src/mainboard/lippert/spacerunner-lx/devicetree.cb delete mode 100644 src/mainboard/lippert/spacerunner-lx/irq_tables.c delete mode 100644 src/mainboard/lippert/spacerunner-lx/mainboard.c delete mode 100644 src/mainboard/lippert/spacerunner-lx/romstage.c (limited to 'src/mainboard/lippert') diff --git a/src/mainboard/lippert/hurricane-lx/Kconfig b/src/mainboard/lippert/hurricane-lx/Kconfig deleted file mode 100644 index 04c22201c6..0000000000 --- a/src/mainboard/lippert/hurricane-lx/Kconfig +++ /dev/null @@ -1,56 +0,0 @@ -if BOARD_LIPPERT_HURRICANE_LX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_ITE_IT8712F - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - # Board is equipped with a 1 MB SPI flash, however, due to limitations - # of the IT8712F Super I/O, only the top 512 KB are directly mapped. - select BOARD_ROMSIZE_KB_512 - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_333 - select POWER_BUTTON_FORCE_ENABLE if !BOARD_OLD_REVISION - -config MAINBOARD_DIR - string - default lippert/hurricane-lx - -config MAINBOARD_PART_NUMBER - string - default "Hurricane-LX" - -config IRQ_SLOT_COUNT - int - default 8 - -config BOARD_OLD_REVISION - bool "Board is old pre-3.0 revision" - default n - select POWER_BUTTON_DEFAULT_DISABLE - help - Look on the bottom side for a number like 406-0001-30. The last 2 - digits state the PCB revision (3.0 in this example). For 2.0 or older - boards choose Y, for 3.0 and newer say N. - - Old revision boards need a jumper shorting the power button to - power on automatically. You may enable the button only after this - jumper has been removed. New revision boards are not restricted - in this way, and always have the power button enabled. - -config ONBOARD_UARTS_RS485 - bool "Switch on-board serial ports to RS485" - default n - help - If selected, both on-board serial ports will operate in RS485 mode - instead of RS232. - -config PLLMSRlo - hex - default 0x00de6001 - -endif # BOARD_LIPPERT_HURRICANE_LX diff --git a/src/mainboard/lippert/hurricane-lx/Kconfig.name b/src/mainboard/lippert/hurricane-lx/Kconfig.name deleted file mode 100644 index 810fd44883..0000000000 --- a/src/mainboard/lippert/hurricane-lx/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_LIPPERT_HURRICANE_LX - bool "Hurricane-LX" diff --git a/src/mainboard/lippert/hurricane-lx/board_info.txt b/src/mainboard/lippert/hurricane-lx/board_info.txt deleted file mode 100644 index b464c8528c..0000000000 --- a/src/mainboard/lippert/hurricane-lx/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1154 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lippert/hurricane-lx/devicetree.cb b/src/mainboard/lippert/hurricane-lx/devicetree.cb deleted file mode 100644 index 7f751eb454..0000000000 --- a/src/mainboard/lippert/hurricane-lx/devicetree.cb +++ /dev/null @@ -1,90 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 - register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 8.0 on end # Slot4 - device pci 9.0 on end # Slot3 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot1 - device pci c.0 on end # IT8888 - device pci d.0 on end # Mini-PCI - device pci e.0 on end # Ethernet - device pci f.0 on # ISA Bridge - chip superio/ite/it8712f - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 # EC - io 0x62 = 0x298 # PME - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 # Simple I/O - io 0x64 = 0x1228 # SPI - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/lippert/hurricane-lx/irq_tables.c b/src/mainboard/lippert/hurricane-lx/irq_tables.c deleted file mode 100644 index 8d09cf450c..0000000000 --- a/src/mainboard/lippert/hurricane-lx/irq_tables.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on irq_tables.c from the SpaceRunner-LX mainboard. */ - -#include -#include -#include -#include -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x36, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ - {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ - {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ - {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}}, 0x5, 0x0}, /* Mini-PCI */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lippert/hurricane-lx/mainboard.c b/src/mainboard/lippert/hurricane-lx/mainboard.c deleted file mode 100644 index 0f210cb200..0000000000 --- a/src/mainboard/lippert/hurricane-lx/mainboard.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on mainboard.c from the SpaceRunner-LX mainboard. */ - -#include -#include -#include -#include -#include -#include -#include - -/* Bit1 switches Com1 to RS485, bit2 same for Com2. */ -#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485) - #define SIO_GP1X_CONFIG 0x06 -#else - #define SIO_GP1X_CONFIG 0x00 -#endif - -static const u16 ec_init_table[] = { /* hi = data, lo = index */ - 0x1900, /* Enable monitoring */ - 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ - 0x805C, /* Unlock zero adjust */ - 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ - 0x005C, /* Lock zero adjust */ - 0xD014 /* Also set FAN_CTL polarity to Active High */ -}; - -static void init(struct device *dev) -{ - unsigned int gpio_base, i; - printk(BIOS_DEBUG, "LiPPERT Hurricane-LX ENTER %s\n", __func__); - - /* Init CS5536 GPIOs */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; - - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x08); // GPIO6 open drain 1 - LAN_PD# (jumpered GPIO per default) - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# -#if !IS_ENABLED(CONFIG_BOARD_OLD_REVISION) - outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz - outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz -#endif - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz (new) / PM-LED (old) - - /* Init Environment Controller. */ - for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { - u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); - outb(val >> 8, 0x0296); - } - - /* bit2 = RS485_EN2, bit1 = RS485_EN1 */ - outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ - - printk(BIOS_DEBUG, "LiPPERT Hurricane-LX EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/hurricane-lx/romstage.c b/src/mainboard/lippert/hurricane-lx/romstage.c deleted file mode 100644 index 4e4004bb16..0000000000 --- a/src/mainboard/lippert/hurricane-lx/romstage.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on romstage.c from the SpaceRunner-LX mainboard. */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -/* Bit0 enables Spread Spectrum. */ -#define SMC_CONFIG 0x01 - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - - return smbus_read_byte(device, address); -} - -#if !IS_ENABLED(CONFIG_BOARD_OLD_REVISION) -/* Send config data to System Management Controller via SMB. */ -static int smc_send_config(unsigned char config_data) -{ - if (smbus_check_stop_condition(SMBUS_IO_BASE)) - return 1; - if (smbus_start_condition(SMBUS_IO_BASE)) - return 2; - if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address - return 3; - if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data - return 4; - if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length - return 5; - if (smbus_send_command(SMBUS_IO_BASE, config_data)) - return 6; - smbus_stop_condition(SMBUS_IO_BASE); - return 0; -} -#endif - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -static const u16 sio_init_table[] = { // hi = data, lo = index - 0x042C, // disable ATXPG; VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 enabled - 0x1423, // don't delay PoWeROK1/2 - 0x9072, // watchdog triggers PWROK, counts seconds -#if !IS_ENABLED(CONFIG_USE_WATCHDOG_ON_BOOT) - 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 -#endif - 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xBF27, 0xFF28, 0x2D29, // (GP36 = FAN_CTL3 (PWM), GP23,22,16,15 = SPI, GP13 = PWROK1) - 0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN - 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, WD_ACTIVE - 0x06C8, // config GP12,11 as output, GP10 as input - 0x2DF5, // map Hw Monitor Thermal Output to GP55 -#if IS_ENABLED(CONFIG_BOARD_OLD_REVISION) - 0x1F2A, 0xC072, // switch GP13 to GPIO, WDT output from PWROK to KRST -#endif -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 reg = sio_init_table[i]; - ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); - } -} - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: Must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - -#if !IS_ENABLED(CONFIG_BOARD_OLD_REVISION) - int err; - /* bit0 = Spread Spectrum */ - if ((err = smc_send_config(SMC_CONFIG))) { - printk(BIOS_ERR, "ERROR %d sending config data to SMC\n", err); - } -#endif - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} diff --git a/src/mainboard/lippert/literunner-lx/Kconfig b/src/mainboard/lippert/literunner-lx/Kconfig deleted file mode 100644 index c3aab0e918..0000000000 --- a/src/mainboard/lippert/literunner-lx/Kconfig +++ /dev/null @@ -1,50 +0,0 @@ -if BOARD_LIPPERT_LITERUNNER_LX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_ITE_IT8712F - select HAVE_DEBUG_SMBUS - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - # Board is equipped with a 1 MB SPI flash, however, due to limitations - # of the IT8712F Super I/O, only the top 512 KB are directly mapped. - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_400 - -config MAINBOARD_DIR - string - default lippert/literunner-lx - -config MAINBOARD_PART_NUMBER - string - default "Cool LiteRunner-LX" - -config IRQ_SLOT_COUNT - int - default 5 - -config ONBOARD_UARTS_RS485 - bool "Switch on-board serial ports 1 & 2 to RS485" - default n - help - If selected, the first two on-board serial ports will operate in RS485 - mode instead of RS232. - -config ONBOARD_IDE_SLAVE - bool "Make on-board CF socket act as Slave" - default n - help - If selected, the on-board Compact Flash card socket will act as IDE - Slave instead of Master. - -config PLLMSRlo - hex - default 0x00de6001 - -endif # BOARD_LIPPERT_LITERUNNER_LX diff --git a/src/mainboard/lippert/literunner-lx/Kconfig.name b/src/mainboard/lippert/literunner-lx/Kconfig.name deleted file mode 100644 index 1e44fe4724..0000000000 --- a/src/mainboard/lippert/literunner-lx/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_LIPPERT_LITERUNNER_LX - bool "Cool LiteRunner-LX" diff --git a/src/mainboard/lippert/literunner-lx/board_info.txt b/src/mainboard/lippert/literunner-lx/board_info.txt deleted file mode 100644 index 47b90b5be8..0000000000 --- a/src/mainboard/lippert/literunner-lx/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1128 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lippert/literunner-lx/devicetree.cb b/src/mainboard/lippert/literunner-lx/devicetree.cb deleted file mode 100644 index 834f109f6f..0000000000 --- a/src/mainboard/lippert/literunner-lx/devicetree.cb +++ /dev/null @@ -1,87 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x0000129A" # 00010010 10011010 - register "lpc_serirq_polarity" = "0x0000ED65" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "1" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 8.0 on end # Ethernet 2 - device pci c.0 on end # IT8888 - device pci d.0 on end # Mini-PCI - device pci e.0 on end # Ethernet 1 - device pci f.0 on # ISA Bridge - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 # EC - io 0x62 = 0x298 # PME - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 # Simple I/O - io 0x64 = 0x1228 # SPI - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/lippert/literunner-lx/irq_tables.c b/src/mainboard/lippert/literunner-lx/irq_tables.c deleted file mode 100644 index ede5b1eb8a..0000000000 --- a/src/mainboard/lippert/literunner-lx/irq_tables.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on irq_tables.c from the SpaceRunner-LX mainboard. */ - -#include -#include -#include -#include -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0xB8, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet 1 */ - {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet 2 */ - {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}}, 0x1, 0x0}, /* Mini-PCI */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lippert/literunner-lx/mainboard.c b/src/mainboard/lippert/literunner-lx/mainboard.c deleted file mode 100644 index 11f9e1420a..0000000000 --- a/src/mainboard/lippert/literunner-lx/mainboard.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on mainboard.c from the SpaceRunner-LX mainboard. */ - -#include -#include -#include -#include -#include -#include -#include - -/* Bit0 turns off the Live LED, bit1 switches Com1 to RS485, bit2 same for Com2. */ -#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485) - #define SIO_GP1X_CONFIG 0x07 -#else - #define SIO_GP1X_CONFIG 0x01 -#endif - -/* Bit0 enables COM3's transceiver, bit1 disables the RS485 receiver (e.g. for IR). */ -#define SIO_GP2X_CONFIG 0x00 - -static const u16 ec_init_table[] = { /* hi = data, lo = index */ - 0x1900, /* Enable monitoring */ - 0x3050, /* VIN4,5 enabled */ - 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ - 0x805C, /* Unlock zero adjust */ - 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ - 0x005C, /* Lock zero adjust */ - 0xD014 /* Also set FAN_CTL polarity to Active High */ -}; - -static void init(struct device *dev) -{ - unsigned int gpio_base, i; - printk(BIOS_DEBUG, "LiPPERT LiteRunner-LX ENTER %s\n", __func__); - - /* Init CS5536 GPIOs */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; - - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x04000000, gpio_base + 0x18); // GPIO10 pull up 0 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# - outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz - outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz - - /* Init Environment Controller. */ - for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { - u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); - outb(val >> 8, 0x0296); - } - - /* bit2 = RS485_EN2, bit1 = RS485_EN1, bit0 = Live LED */ - outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ - /* bit1 = COM3_RX_EN, bit0 = COM3_TX_EN */ - outb(SIO_GP2X_CONFIG, 0x1221); /* Simple-I/O GP27-20 */ - - printk(BIOS_DEBUG, "LiPPERT LiteRunner-LX EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/literunner-lx/romstage.c b/src/mainboard/lippert/literunner-lx/romstage.c deleted file mode 100644 index b88a6a4ded..0000000000 --- a/src/mainboard/lippert/literunner-lx/romstage.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on romstage.c from the SpaceRunner-LX mainboard. */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -/* Bit0 enables Spread Spectrum, bit1 makes on-board CF slot act as IDE slave. */ -#if IS_ENABLED(CONFIG_ONBOARD_IDE_SLAVE) - #define SMC_CONFIG 0x03 -#else - #define SMC_CONFIG 0x01 -#endif - -static const unsigned char spdbytes[] = { // 4x Promos V58C2512164SA-J5I - 0xFF, 0xFF, // only values used by Geode-LX raminit.c are set - [SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, // (Fundamental) memory type - [SPD_NUM_ROWS] = 0x0D, // Number of row address bits [13] - [SPD_NUM_COLUMNS] = 0x0A, // Number of column address bits [10] - [SPD_NUM_DIMM_BANKS] = 1, // Number of module rows (banks) - 0xFF, 0xFF, 0xFF, - [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 0x50, // SDRAM cycle time (highest CAS latency), RAS access time (tRAC) [5.0 ns in BCD] - 0xFF, 0xFF, - [SPD_REFRESH] = 0x82, // Refresh rate/type [Self Refresh, 7.8 us] - [SPD_PRIMARY_SDRAM_WIDTH] = 64, // SDRAM width (primary SDRAM) [64 bits] - 0xFF, 0xFF, 0xFF, - [SPD_NUM_BANKS_PER_SDRAM] = 4, // SDRAM device attributes, number of banks on SDRAM device - [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x1C, // SDRAM device attributes, CAS latency [3, 2.5, 2] - 0xFF, 0xFF, - [SPD_MODULE_ATTRIBUTES] = 0x20, // SDRAM module attributes [differential clk] - [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0x40, // SDRAM device attributes, general [Concurrent AP] - [SPD_SDRAM_CYCLE_TIME_2ND] = 0x60, // SDRAM cycle time (2nd highest CAS latency) [6.0 ns in BCD] - 0xFF, - [SPD_SDRAM_CYCLE_TIME_3RD] = 0x75, // SDRAM cycle time (3rd highest CAS latency) [7.5 ns in BCD] - 0xFF, - [SPD_tRP] = 60, // Min. row precharge time [15 ns in units of 0.25 ns] - [SPD_tRRD] = 40, // Min. row active to row active [10 ns in units of 0.25 ns] - [SPD_tRCD] = 60, // Min. RAS to CAS delay [15 ns in units of 0.25 ns] - [SPD_tRAS] = 40, // Min. RAS pulse width = active to precharge delay [40 ns] - [SPD_BANK_DENSITY] = 0x40, // Density of each row on module [256 MB] - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - [SPD_tRFC] = 70 // SDRAM Device Minimum Auto Refresh to Active/Auto Refresh [70 ns] -}; - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - -#if IS_ENABLED(CONFIG_DEBUG_SMBUS) - if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) - printk(BIOS_ERR, "ERROR: spd_read_byte(DIMM0, 0x%02x) " - "returns 0xff\n", address); -#endif - - /* Fake SPD ROM value */ - return (address < sizeof(spdbytes)) ? spdbytes[address] : 0xFF; -} - -/* Send config data to System Management Controller via SMB. */ -static int smc_send_config(unsigned char config_data) -{ - if (smbus_check_stop_condition(SMBUS_IO_BASE)) - return 1; - if (smbus_start_condition(SMBUS_IO_BASE)) - return 2; - if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address - return 3; - if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data - return 4; - if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length - return 5; - if (smbus_send_command(SMBUS_IO_BASE, config_data)) - return 6; - smbus_stop_condition(SMBUS_IO_BASE); - return 0; -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -static const u16 sio_init_table[] = { // hi = data, lo = index - 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal - 0x1423, // don't delay PoWeROK1/2 - 0x9072, // watchdog triggers PWROK, counts seconds -#if !IS_ENABLED(CONFIG_USE_WATCHDOG_ON_BOOT) - 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 -#endif - 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xFF27, 0xDF28, 0x2729, // (GP45 = SUSB, GP23,22,16,15 = SPI, GP13 = PWROK1) - 0x66B8, 0x0FB9, // enable pullups on SPI, RS485_EN, COM3_R/TX_EN - 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED - 0x03C1, // enable Simple-I/O for GP21-20= COM3_RX_EN,TX_EN - 0xFFC2, // enable Simple-I/O for GP37-30 - 0x07C8, // config GP12-10 as output - 0x03C9, // config GP21-20 as output - 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x08F8, // map GP LED Blinking 1 to GP10 = LIVE_LED (deactivate Simple I/O to use) -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 reg = sio_init_table[i]; - ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); - } -} - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - int err; - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: Must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - /* bit1 = on-board IDE is slave, bit0 = Spread Spectrum */ - if ((err = smc_send_config(SMC_CONFIG))) { - printk(BIOS_ERR, "ERROR %d sending config data to SMC\n", err); - } - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} diff --git a/src/mainboard/lippert/roadrunner-lx/Kconfig b/src/mainboard/lippert/roadrunner-lx/Kconfig deleted file mode 100644 index 051713a27d..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/Kconfig +++ /dev/null @@ -1,42 +0,0 @@ -if BOARD_LIPPERT_ROADRUNNER_LX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_ITE_IT8712F - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - # Standard chip is a 512 KB FWH. Replacing it with a 1 MB - # SST 49LF008A is possible. - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_333 - -config MAINBOARD_DIR - string - default lippert/roadrunner-lx - -config MAINBOARD_PART_NUMBER - string - default "Cool RoadRunner-LX" - -config IRQ_SLOT_COUNT - int - default 7 - -config ONBOARD_UARTS_RS485 - bool "Switch on-board serial ports to RS485" - default n - help - If selected, both on-board serial ports will operate in RS485 mode - instead of RS232. - -config PLLMSRlo - hex - default 0x00de6001 - -endif # BOARD_LIPPERT_ROADRUNNER_LX diff --git a/src/mainboard/lippert/roadrunner-lx/Kconfig.name b/src/mainboard/lippert/roadrunner-lx/Kconfig.name deleted file mode 100644 index e7185da0fa..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_LIPPERT_ROADRUNNER_LX - bool "Cool RoadRunner-LX" diff --git a/src/mainboard/lippert/roadrunner-lx/board_info.txt b/src/mainboard/lippert/roadrunner-lx/board_info.txt deleted file mode 100644 index fc48fcd973..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1147 -ROM package: PLCC -ROM protocol: FWH -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/lippert/roadrunner-lx/devicetree.cb b/src/mainboard/lippert/roadrunner-lx/devicetree.cb deleted file mode 100644 index f82368108d..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/devicetree.cb +++ /dev/null @@ -1,89 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 # Southbridge - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 - register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 8.0 on end # Slot4 - device pci 9.0 on end # Slot3 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot1 - device pci c.0 on end # IT8888 - device pci e.0 on end # Ethernet - device pci f.0 on # ISA bridge - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 # EC - io 0x62 = 0x298 # PME - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 # Simple I/O - # io 0x64 = 0x1228 # SPI - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/lippert/roadrunner-lx/irq_tables.c b/src/mainboard/lippert/roadrunner-lx/irq_tables.c deleted file mode 100644 index f5cf698827..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/irq_tables.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on irq_tables.c from AMD's DB800 mainboard. */ - -#include -#include -#include -#include -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0xE0, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ - {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ - {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lippert/roadrunner-lx/mainboard.c b/src/mainboard/lippert/roadrunner-lx/mainboard.c deleted file mode 100644 index b922e7872b..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/mainboard.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on mainboard.c from AMD's DB800 mainboard. */ - -#include -#include -#include -#include -#include -#include -#include - -/* Bit1 switches Com1 to RS485, bit2 same for Com2, bit5 turns off the Live LED. */ -#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485) - #define SIO_GP1X_CONFIG 0x26 -#else - #define SIO_GP1X_CONFIG 0x20 -#endif - -static const u16 ec_init_table[] = { /* hi = data, lo = index */ - 0x1900, /* Enable monitoring */ - 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ - 0x805C, /* Unlock zero adjust */ - 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ - 0x005C, /* Lock zero adjust */ - 0xD014 /* Also set FAN_CTL polarity to Active High */ -}; - -static void init(struct device *dev) -{ - unsigned int gpio_base, i; - printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX ENTER %s\n", __func__); - - /* Init CS5536 GPIOs. */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; - - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - PM-LED - - /* Init Environment Controller. */ - for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { - u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); - outb(val >> 8, 0x0296); - } - - /* bit5 = Live LED, bit2 = RS485_EN2, bit1 = RS485_EN1 */ - outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ - printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c deleted file mode 100644 index 49b333b590..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/romstage.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on romstage.c from AMD's DB800 and DBM690T mainboards. */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -static const u16 sio_init_table[] = { // hi = data, lo = index - 0x1E2C, // disable ATXPG; VIN6,FAN4/5,VIN3 enabled, VIN7 internal - 0x1423, // don't delay PoWeROK1/2 - triggers 2nd reset - 0x9072, // watchdog triggers PWROK, counts seconds -#if !IS_ENABLED(CONFIG_USE_WATCHDOG_ON_BOOT) - 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 -#endif - 0xBF25, 0x372A, 0xF326, // select GPIO function for most pins - 0xBF27, 0xFF28, 0x2529, // (GP36 = FAN_CTL3, GP13 = PWROK1) - 0x46B8, 0x0CB9, // enable pullups on RS485_EN - 0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1 - 0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector) - 0x26C8, // config GP15,12,11 as output; GP14 as input - 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x0DF8, // map GP LED Blinking 1 to GP15 = LIVE_LED (deactivate Simple-I/O to use) -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 reg = sio_init_table[i]; - ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); - } -} - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} diff --git a/src/mainboard/lippert/spacerunner-lx/Kconfig b/src/mainboard/lippert/spacerunner-lx/Kconfig deleted file mode 100644 index 65645fdbf0..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/Kconfig +++ /dev/null @@ -1,49 +0,0 @@ -if BOARD_LIPPERT_SPACERUNNER_LX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_ITE_IT8712F - select HAVE_DEBUG_SMBUS - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - # Board is equipped with a 1 MB SPI flash, however, due to limitations - # of the IT8712F Super I/O, only the top 512 KB are directly mapped. - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_400 - -config MAINBOARD_DIR - string - default lippert/spacerunner-lx - -config MAINBOARD_PART_NUMBER - string - default "Cool SpaceRunner-LX" - -config IRQ_SLOT_COUNT - int - default 7 - -config ONBOARD_UARTS_RS485 - bool "Switch on-board serial ports to RS485" - default n - help - If selected, both on-board serial ports will operate in RS485 mode - instead of RS232. - -config ONBOARD_IDE_SLAVE - bool "Make on-board SSD act as Slave" - default n - help - If selected, the on-board SSD will act as IDE Slave instead of Master. - -config PLLMSRlo - hex - default 0x00de6001 - -endif # BOARD_LIPPERT_SPACERUNNER_LX diff --git a/src/mainboard/lippert/spacerunner-lx/Kconfig.name b/src/mainboard/lippert/spacerunner-lx/Kconfig.name deleted file mode 100644 index 85eec96382..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_LIPPERT_SPACERUNNER_LX - bool "Cool SpaceRunner-LX" diff --git a/src/mainboard/lippert/spacerunner-lx/board_info.txt b/src/mainboard/lippert/spacerunner-lx/board_info.txt deleted file mode 100644 index 76be510bb6..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1148 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lippert/spacerunner-lx/devicetree.cb b/src/mainboard/lippert/spacerunner-lx/devicetree.cb deleted file mode 100644 index 5f5b15bbb6..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/devicetree.cb +++ /dev/null @@ -1,90 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 - register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0x80007B00" # Audio: 1 << 31 + Device 0x0F << 11 + Function 3 << 8 - register "unwanted_vpci[1]" = "0" # End of list has a zero - device pci 8.0 on end # Slot4 - device pci 9.0 on end # Slot3 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot1 - device pci c.0 on end # IT8888 - device pci e.0 on end # Ethernet - device pci f.0 on # ISA Bridge - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 # EC - io 0x62 = 0x298 # PME - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 # Simple I/O - io 0x64 = 0x1228 # SPI - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE - device pci f.3 off end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/lippert/spacerunner-lx/irq_tables.c b/src/mainboard/lippert/spacerunner-lx/irq_tables.c deleted file mode 100644 index 37e82e5cf4..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/irq_tables.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on irq_tables.c from AMD's DB800 mainboard. */ - -#include -#include -#include -#include -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0xE0, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ - {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ - {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lippert/spacerunner-lx/mainboard.c b/src/mainboard/lippert/spacerunner-lx/mainboard.c deleted file mode 100644 index 594545d146..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/mainboard.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on mainboard.c from AMD's DB800 mainboard. */ - -#include -#include -#include -#include -#include -#include -#include - -/* Bit0 turns off the Live LED, bit1 switches Com1 to RS485, bit2 same for Com2. */ -#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485) - #define SIO_GP1X_CONFIG 0x07 -#else - #define SIO_GP1X_CONFIG 0x01 -#endif - -static const u16 ec_init_table[] = { /* hi = data, lo = index */ - 0x1900, /* Enable monitoring */ - 0x3050, /* VIN4,5 enabled */ - 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ - 0x805C, /* Unlock zero adjust */ - 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ - 0x005C, /* Lock zero adjust */ - 0xD014 /* Also set FAN_CTL polarity to Active High */ -}; - -static void init(struct device *dev) -{ - unsigned int gpio_base, i; - printk(BIOS_DEBUG, "LiPPERT SpaceRunner-LX ENTER %s\n", __func__); - - /* Init CS5536 GPIOs */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; - - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x04000000, gpio_base + 0x18); // GPIO10 pull up 0 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# - outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz - outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz - - /* Init Environment Controller. */ - for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { - u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); - outb(val >> 8, 0x0296); - } - - /* bit2 = RS485_EN2, bit1 = RS485_EN1, bit0 = Live LED */ - outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ - - printk(BIOS_DEBUG, "LiPPERT SpaceRunner-LX EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/spacerunner-lx/romstage.c b/src/mainboard/lippert/spacerunner-lx/romstage.c deleted file mode 100644 index a8885700ef..0000000000 --- a/src/mainboard/lippert/spacerunner-lx/romstage.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on romstage.c from AMD's DB800 and DBM690T mainboards. */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -/* Bit0 enables Spread Spectrum, bit1 makes on-board SSD act as IDE slave. */ -#if IS_ENABLED(CONFIG_ONBOARD_IDE_SLAVE) - #define SMC_CONFIG 0x03 -#else - #define SMC_CONFIG 0x01 -#endif - -static const unsigned char spdbytes[] = { // 4x Promos V58C2512164SA-J5I - 0xFF, 0xFF, // only values used by Geode-LX raminit.c are set - [SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, // (Fundamental) memory type - [SPD_NUM_ROWS] = 0x0D, // Number of row address bits [13] - [SPD_NUM_COLUMNS] = 0x0A, // Number of column address bits [10] - [SPD_NUM_DIMM_BANKS] = 1, // Number of module rows (banks) - 0xFF, 0xFF, 0xFF, - [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 0x50, // SDRAM cycle time (highest CAS latency), RAS access time (tRAC) [5.0 ns in BCD] - 0xFF, 0xFF, - [SPD_REFRESH] = 0x82, // Refresh rate/type [Self Refresh, 7.8 us] - [SPD_PRIMARY_SDRAM_WIDTH] = 64, // SDRAM width (primary SDRAM) [64 bits] - 0xFF, 0xFF, 0xFF, - [SPD_NUM_BANKS_PER_SDRAM] = 4, // SDRAM device attributes, number of banks on SDRAM device - [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x1C, // SDRAM device attributes, CAS latency [3, 2.5, 2] - 0xFF, 0xFF, - [SPD_MODULE_ATTRIBUTES] = 0x20, // SDRAM module attributes [differential clk] - [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0x40, // SDRAM device attributes, general [Concurrent AP] - [SPD_SDRAM_CYCLE_TIME_2ND] = 0x60, // SDRAM cycle time (2nd highest CAS latency) [6.0 ns in BCD] - 0xFF, - [SPD_SDRAM_CYCLE_TIME_3RD] = 0x75, // SDRAM cycle time (3rd highest CAS latency) [7.5 ns in BCD] - 0xFF, - [SPD_tRP] = 60, // Min. row precharge time [15 ns in units of 0.25 ns] - [SPD_tRRD] = 40, // Min. row active to row active [10 ns in units of 0.25 ns] - [SPD_tRCD] = 60, // Min. RAS to CAS delay [15 ns in units of 0.25 ns] - [SPD_tRAS] = 40, // Min. RAS pulse width = active to precharge delay [40 ns] - [SPD_BANK_DENSITY] = 0x40, // Density of each row on module [256 MB] - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - [SPD_tRFC] = 70 // SDRAM Device Minimum Auto Refresh to Active/Auto Refresh [70 ns] -}; - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - -#if IS_ENABLED(CONFIG_DEBUG_SMBUS) - if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) { - printk(BIOS_ERR, "ERROR: spd_read_byte(DIMM0, 0x%02x) " - "returns 0xff\n", address); - } -#endif - - /* Fake SPD ROM value */ - return (address < sizeof(spdbytes)) ? spdbytes[address] : 0xFF; -} - -/* Send config data to System Management Controller via SMB. */ -static int smc_send_config(unsigned char config_data) -{ - if (smbus_check_stop_condition(SMBUS_IO_BASE)) - return 1; - if (smbus_start_condition(SMBUS_IO_BASE)) - return 2; - if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address - return 3; - if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data - return 4; - if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length - return 5; - if (smbus_send_command(SMBUS_IO_BASE, config_data)) - return 6; - smbus_stop_condition(SMBUS_IO_BASE); - return 0; -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -static const u16 sio_init_table[] = { // hi = data, lo = index - 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal - 0x1423, // don't delay PoWeROK1/2 - 0x9072, // watchdog triggers PWROK, counts seconds -#if !IS_ENABLED(CONFIG_USE_WATCHDOG_ON_BOOT) - 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 -#endif - 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xFF27, 0xDF28, 0x2729, // (GP45 = SUSB, GP23,22,16,15 = SPI, GP13 = PWROK1) - 0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN - 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED - 0x07C8, // config GP12-10 as output - 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x08F8, // map GP LED Blinking 1 to GP10 = LIVE_LED (deactivate Simple I/O to use) -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 reg = sio_init_table[i]; - ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); - } -} - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - int err; - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: Must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - /* bit1 = on-board IDE is slave, bit0 = Spread Spectrum */ - if ((err = smc_send_config(SMC_CONFIG))) { - printk(BIOS_ERR, "ERROR %d sending config data to SMC\n", err); - } - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ - return; -} -- cgit v1.2.3