From 00d673d165006b28bbbe5b2d84ef80d8665d8f34 Mon Sep 17 00:00:00 2001 From: Jens Rottmann Date: Thu, 7 Mar 2013 19:02:15 +0100 Subject: FrontRunner/Toucan-AF: lower SPI speed to 22 MHz The Hudson-E1's default SPI speed for normal i.e. non-fast reads is 66 MHz, but the SST 25VF032B datasheet allows max. 25. Lower the speed to 22 MHz, otherwise BIOS flashing fails. Change-Id: I22e87d833a3ebd316b6e873595a2480831533ab1 Signed-off-by: Jens Rottmann Reviewed-on: http://review.coreboot.org/2605 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel --- src/mainboard/lippert/frontrunner-af/mainboard.c | 5 +++++ src/mainboard/lippert/toucan-af/mainboard.c | 5 +++++ 2 files changed, 10 insertions(+) (limited to 'src/mainboard/lippert') diff --git a/src/mainboard/lippert/frontrunner-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/mainboard.c index 83c90f391a..72f2793cc4 100644 --- a/src/mainboard/lippert/frontrunner-af/mainboard.c +++ b/src/mainboard/lippert/frontrunner-af/mainboard.c @@ -87,6 +87,7 @@ static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data) static void init(struct device *dev) { + volatile u8 *spi_base; // base addr of Hudson's SPI host controller int i; printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__); @@ -123,6 +124,10 @@ static void init(struct device *dev) outb((u8)val, SIO_RUNTIME_BASE + (val >> 8)); } + /* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */ + spi_base = (u8*)(pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x14, 3)), 0xA0) & 0xFFFFFFE0); + spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register + /* Notify the SMC we're alive and kicking, or after a while it will * effect a power cycle and switch to the alternate BIOS chip. * Should be done as late as possible. */ diff --git a/src/mainboard/lippert/toucan-af/mainboard.c b/src/mainboard/lippert/toucan-af/mainboard.c index 27952fa33d..367397e97c 100644 --- a/src/mainboard/lippert/toucan-af/mainboard.c +++ b/src/mainboard/lippert/toucan-af/mainboard.c @@ -56,6 +56,7 @@ static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data) static void init(struct device *dev) { + volatile u8 *spi_base; // base addr of Hudson's SPI host controller int i; printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__); @@ -90,6 +91,10 @@ static void init(struct device *dev) printk(BIOS_INFO, "Board revision ID: %u\n", fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56)); + /* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */ + spi_base = (u8*)(pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x14, 3)), 0xA0) & 0xFFFFFFE0); + spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register + /* Notify the SMC we're alive and kicking, or after a while it will * effect a power cycle and switch to the alternate BIOS chip. * Should be done as late as possible. */ -- cgit v1.2.3