From 64aa881263fa3fdec827a3f7adf04b138ab82ff1 Mon Sep 17 00:00:00 2001 From: Kyösti Mälkki Date: Mon, 4 Jun 2018 06:49:00 +0300 Subject: amd/geode_lx: Remove most boards MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is active work to convert remaining two boards, PC Engines alix1c and alix2d, to EARLY_CBMEM_INIT. Change-Id: I87e3963af7ef719e9fa2a8b0df34a896265905f0 Signed-off-by: Kyösti Mälkki Reviewed-on: https://review.coreboot.org/26824 Tested-by: build bot (Jenkins) --- src/mainboard/lippert/roadrunner-lx/romstage.c | 110 ------------------------- 1 file changed, 110 deletions(-) delete mode 100644 src/mainboard/lippert/roadrunner-lx/romstage.c (limited to 'src/mainboard/lippert/roadrunner-lx/romstage.c') diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c deleted file mode 100644 index 49b333b590..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/romstage.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on romstage.c from AMD's DB800 and DBM690T mainboards. */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -static const u16 sio_init_table[] = { // hi = data, lo = index - 0x1E2C, // disable ATXPG; VIN6,FAN4/5,VIN3 enabled, VIN7 internal - 0x1423, // don't delay PoWeROK1/2 - triggers 2nd reset - 0x9072, // watchdog triggers PWROK, counts seconds -#if !IS_ENABLED(CONFIG_USE_WATCHDOG_ON_BOOT) - 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 -#endif - 0xBF25, 0x372A, 0xF326, // select GPIO function for most pins - 0xBF27, 0xFF28, 0x2529, // (GP36 = FAN_CTL3, GP13 = PWROK1) - 0x46B8, 0x0CB9, // enable pullups on RS485_EN - 0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1 - 0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector) - 0x26C8, // config GP15,12,11 as output; GP14 as input - 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x0DF8, // map GP LED Blinking 1 to GP15 = LIVE_LED (deactivate Simple-I/O to use) -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 reg = sio_init_table[i]; - ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); - } -} - -void asmlinkage mainboard_romstage_entry(unsigned long bist) -{ - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} -- cgit v1.2.3