From 7dc2864be7fcc342bab0c167997803f5faf147a1 Mon Sep 17 00:00:00 2001 From: Patrick Georgi Date: Fri, 13 Jul 2012 19:06:22 +0200 Subject: amd/lx: Move configuration from source to Kconfig LX has two values that are usually automatically derived but can be overridden, that were so far defined in each board's romstage. These values, along with the toggle to enable override are now part of LX's Kconfig. For boards that gave values but requested autogeneration, the values are removed. Further improvements: Figure out the various fields in PLLMSRlo and make them sensible Kconfig options (instead of the hex value it is now) Change-Id: I8a17c89e4a3cb1b52aaceef645955ab7817b482d Signed-off-by: Patrick Georgi Reviewed-on: http://review.coreboot.org/1227 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- src/mainboard/lippert/roadrunner-lx/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'src/mainboard/lippert/roadrunner-lx/Kconfig') diff --git a/src/mainboard/lippert/roadrunner-lx/Kconfig b/src/mainboard/lippert/roadrunner-lx/Kconfig index 2d11b33972..f5ec9b9d77 100644 --- a/src/mainboard/lippert/roadrunner-lx/Kconfig +++ b/src/mainboard/lippert/roadrunner-lx/Kconfig @@ -14,6 +14,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy # SST 49LF008A is possible. select BOARD_ROMSIZE_KB_512 select POWER_BUTTON_FORCE_ENABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_333 config MAINBOARD_DIR string @@ -34,4 +36,8 @@ config ONBOARD_UARTS_RS485 If selected, both on-board serial ports will operate in RS485 mode instead of RS232. +config PLLMSRlo + hex + default 0x00de6001 + endif # BOARD_LIPPERT_ROADRUNNER_LX -- cgit v1.2.3