From b5381105325391553b17c6ec2455233fc27e73b8 Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Sat, 15 Oct 2011 17:31:01 +0200 Subject: T60: Add support for Ultrabay Legacy I/O devices (40Y8122) Those modules have basically the same Super I/O capabilities as the Docking station. Unfortunately, the Super I/O in the module shares the same I/O address as the Docking station, so we're not allowed to connect the LPC Docking Bus if such a module is present. To be able to detect this device and use it as early console for coreboot, we have to initialize the GPIO Controller before, as this device is detected via GPIO06. Change-Id: If7c38bb6797f76cf28f09f3614ab9a33878571fb Signed-off-by: Sven Schnelle Reviewed-on: http://review.coreboot.org/282 Tested-by: build bot (Jenkins) --- src/mainboard/lenovo/t60/dock.c | 37 +++++++++++++++++++++++--------- src/mainboard/lenovo/t60/dock.h | 3 +++ src/mainboard/lenovo/t60/mainboard.c | 11 ++++++++-- src/mainboard/lenovo/t60/mainboard_smi.c | 8 ++++++- src/mainboard/lenovo/t60/romstage.c | 21 ++++++++++++------ 5 files changed, 60 insertions(+), 20 deletions(-) (limited to 'src/mainboard/lenovo') diff --git a/src/mainboard/lenovo/t60/dock.c b/src/mainboard/lenovo/t60/dock.c index 6642bb3759..5cd8997355 100644 --- a/src/mainboard/lenovo/t60/dock.c +++ b/src/mainboard/lenovo/t60/dock.c @@ -28,8 +28,11 @@ #include "dock.h" #include "superio/nsc/pc87384/pc87384.h" #include "ec/acpi/ec.h" +#include "ec/lenovo/pmh7/pmh7.h" #include "southbridge/intel/i82801gx/i82801gx.h" +#define DLPC_CONTROL 0x164c + static void dlpc_write_register(int reg, int value) { outb(reg, 0x164e); @@ -102,12 +105,15 @@ int dlpc_init(void) /* Select DLPC module */ dlpc_write_register(0x07, 0x19); - /* DLPC Base Address 0x164c */ - dlpc_write_register(0x60, 0x16); - dlpc_write_register(0x61, 0x4c); + /* DLPC Base Address */ + dlpc_write_register(0x60, (DLPC_CONTROL >> 8) & 0xff); + dlpc_write_register(0x61, DLPC_CONTROL & 0xff); /* Activate DLPC */ dlpc_write_register(0x30, 0x01); + /* Reset docking state */ + outb(0x00, DLPC_CONTROL); + dlpc_gpio_init(); return 0; } @@ -127,7 +133,7 @@ static int dock_superio_init(void) /* set GPIO pins to Serial/Parallel Port * functions */ - dock_write_register(0x22, 0xeb); + dock_write_register(0x22, 0xa9); dock_write_register(0x07, PC87384_GPIO); dock_write_register(0x60, 0x16); @@ -179,16 +185,16 @@ int dock_connect(void) { int timeout = 1000; - outb(0x07, 0x164c); + outb(0x07, DLPC_CONTROL); timeout = 1000; - while(!(inb(0x164c) & 8) && timeout--) + while(!(inb(DLPC_CONTROL) & 8) && timeout--) udelay(1000); if (!timeout) { /* docking failed, disable DLPC switch */ - outb(0x00, 0x164c); + outb(0x00, DLPC_CONTROL); dlpc_write_register(0x30, 0x00); return 1; } @@ -206,14 +212,25 @@ int dock_connect(void) void dock_disconnect(void) { /* disconnect LPC bus */ - outb(0x00, 0x164c); + outb(0x00, DLPC_CONTROL); /* Assert PLTRST and DLPCPD */ outb(0xfc, 0x1680); } int dock_present(void) { - outb(0x61, 0x15ec); - return inb(0x15ee) & 1; + return pmh7_register_read(0x61) & 1; +} + +int legacy_io_present(void) +{ + return !(inb(DEFAULT_GPIOBASE + 0x0c) & 0x40); } +void legacy_io_init(void) +{ + /* Enable Power for Ultrabay slot */ + pmh7_ultrabay_power_enable(1); + udelay(100000); + dock_superio_init(); +} diff --git a/src/mainboard/lenovo/t60/dock.h b/src/mainboard/lenovo/t60/dock.h index 9d35d9faf5..631f007488 100644 --- a/src/mainboard/lenovo/t60/dock.h +++ b/src/mainboard/lenovo/t60/dock.h @@ -24,4 +24,7 @@ extern int dock_connect(void); extern void dock_disconnect(void); extern int dock_present(void); extern int dlpc_init(void); + +extern int legacy_io_present(void); +extern void legacy_io_init(void); #endif diff --git a/src/mainboard/lenovo/t60/mainboard.c b/src/mainboard/lenovo/t60/mainboard.c index 2b8c5fe4b1..8456992044 100644 --- a/src/mainboard/lenovo/t60/mainboard.c +++ b/src/mainboard/lenovo/t60/mainboard.c @@ -38,6 +38,7 @@ static void mainboard_enable(device_t dev) { + struct southbridge_intel_i82801gx_config *config; device_t dev0, idedev; u8 defaults_loaded = 0; @@ -50,8 +51,14 @@ static void mainboard_enable(device_t dev) ec_write(0x0c, 0xc7); idedev = dev_find_slot(0, PCI_DEVFN(0x1f,1)); - if (idedev && idedev->chip_info && h8_ultrabay_device_present()) { - struct southbridge_intel_i82801gx_config *config = idedev->chip_info; + + if (!(inb(DEFAULT_GPIOBASE + 0x0c) & 0x40)) { + /* legacy I/O connected */ + pmh7_ultrabay_power_enable(1); + ec_write(0x0c, 0x84); + } else if (idedev && idedev->chip_info && + h8_ultrabay_device_present()) { + config = idedev->chip_info; config->ide_enable_primary = 1; pmh7_ultrabay_power_enable(1); ec_write(0x0c, 0x84); diff --git a/src/mainboard/lenovo/t60/mainboard_smi.c b/src/mainboard/lenovo/t60/mainboard_smi.c index 4a0b5062c9..eb282564af 100644 --- a/src/mainboard/lenovo/t60/mainboard_smi.c +++ b/src/mainboard/lenovo/t60/mainboard_smi.c @@ -75,7 +75,13 @@ int mainboard_io_trap_handler(int smif) switch (smif) { case SMI_DOCK_CONNECT: - dlpc_init(); + /* If there's an legacy I/O module present, we're not + * allowed to connect the Docking LPC Bus, as both Super I/O + * chips are using 0x2e as base address. + */ + if (legacy_io_present()) + break; + if (!dock_connect()) { /* set dock LED to indicate status */ ec_write(0x0c, 0x08); diff --git a/src/mainboard/lenovo/t60/romstage.c b/src/mainboard/lenovo/t60/romstage.c index 252ae40023..7ed776830e 100644 --- a/src/mainboard/lenovo/t60/romstage.c +++ b/src/mainboard/lenovo/t60/romstage.c @@ -210,7 +210,7 @@ static void early_ich7_init(void) void main(unsigned long bist) { u32 reg32; - int boot_mode = 0; + int boot_mode = 0, dock_err; const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x52, 0x51, 0x53 }; if (bist == 0) @@ -223,15 +223,21 @@ void main(unsigned long bist) ich7_enable_lpc(); + /* We want early GPIO setup, to be able to detect legacy I/O module */ + pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1); + /* Enable GPIOs */ + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c /* GC */ , 0x10); + setup_ich7_gpios(); - /* dock_init initializes the DLPC switch on - * thinpad side, so this is required even - * if we're undocked. - */ - if (!dlpc_init() && dock_present()) { + dock_err = dlpc_init(); + + /* We prefer Legacy I/O module over docking */ + if (legacy_io_present()) { + legacy_io_init(); + early_superio_config(); + } else if (!dock_err && dock_present()) { dock_connect(); early_superio_config(); - /* Set up the console */ } #if CONFIG_USBDEBUG @@ -239,6 +245,7 @@ void main(unsigned long bist) early_usbdebug_init(); #endif + /* Setup the console */ console_init(); /* Halt if there was a built in self test failure */ -- cgit v1.2.3