From 117fd8d64518034298a4098532ba93f8f2459319 Mon Sep 17 00:00:00 2001 From: Elyes HAOUAS Date: Thu, 29 Sep 2016 20:29:54 +0200 Subject: mainboard/kontron/986lcd-m: Use tabs for indents Change-Id: Ibeb0da2f75b4aec32f5238e5634bc1f1d8220b84 Signed-off-by: Elyes HAOUAS Reviewed-on: https://review.coreboot.org/16820 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/mainboard/kontron/986lcd-m/devicetree.cb | 98 ++++++++++++++-------------- 1 file changed, 49 insertions(+), 49 deletions(-) (limited to 'src/mainboard/kontron/986lcd-m') diff --git a/src/mainboard/kontron/986lcd-m/devicetree.cb b/src/mainboard/kontron/986lcd-m/devicetree.cb index b9ddf75fb1..6795cdc38e 100644 --- a/src/mainboard/kontron/986lcd-m/devicetree.cb +++ b/src/mainboard/kontron/986lcd-m/devicetree.cb @@ -3,19 +3,19 @@ chip northbridge/intel/i945 register "gfx.ndid" = "3" register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" - device cpu_cluster 0 on - chip cpu/intel/socket_mFCPGA478 - device lapic 0 on end - end - end + device cpu_cluster 0 on + chip cpu/intel/socket_mFCPGA478 + device lapic 0 on end + end + end - device domain 0 on - device pci 00.0 on end # host bridge + device domain 0 on + device pci 00.0 on end # host bridge device pci 01.0 off end # i945 PCIe root port device pci 02.0 on end # vga controller device pci 02.1 on end # display controller - chip southbridge/intel/i82801gx + chip southbridge/intel/i82801gx register "pirqa_routing" = "0x0b" register "pirqb_routing" = "0x0b" register "pirqc_routing" = "0x0b" @@ -31,45 +31,45 @@ chip northbridge/intel/i945 # 2 SCI (if corresponding GPIO_EN bit is also set) register "gpi13_routing" = "1" - register "ide_legacy_combined" = "0x1" - register "ide_enable_primary" = "0x1" - register "ide_enable_secondary" = "0x1" - register "sata_ahci" = "0x0" + register "ide_legacy_combined" = "0x1" + register "ide_enable_primary" = "0x1" + register "ide_enable_secondary" = "0x1" + register "sata_ahci" = "0x0" register "c3_latency" = "85" register "p_cnt_throttling_supported" = "0" - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe - device pci 1c.1 on end # PCIe - device pci 1c.2 on end # PCIe + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe + device pci 1c.1 on end # PCIe + device pci 1c.2 on end # PCIe #device pci 1c.3 off end # PCIe port 4 #device pci 1c.4 off end # PCIe port 5 #device pci 1c.5 off end # PCIe port 6 - device pci 1d.0 on end # USB UHCI - device pci 1d.1 on end # USB UHCI - device pci 1d.2 on end # USB UHCI - device pci 1d.3 on end # USB UHCI - device pci 1d.7 on end # USB2 EHCI - device pci 1e.0 on end # PCI bridge + device pci 1d.0 on end # USB UHCI + device pci 1d.1 on end # USB UHCI + device pci 1d.2 on end # USB UHCI + device pci 1d.3 on end # USB UHCI + device pci 1d.7 on end # USB2 EHCI + device pci 1e.0 on end # PCI bridge #device pci 1e.2 off end # AC'97 Audio #device pci 1e.3 off end # AC'97 Modem - device pci 1f.0 on # LPC bridge - chip superio/winbond/w83627thg + device pci 1f.0 on # LPC bridge + chip superio/winbond/w83627thg device pnp 2e.0 off # Floppy end device pnp 2e.1 on # Parallel port io 0x60 = 0x378 irq 0x70 = 5 end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq - end + end device pnp 2e.5 on # Keyboard+Mouse io 0x60 = 0x60 io 0x62 = 0x64 @@ -96,21 +96,21 @@ chip northbridge/intel/i945 irq 0x70 = 0 end - end - chip superio/winbond/w83627thg - device pnp 4e.0 off # Floppy + end + chip superio/winbond/w83627thg + device pnp 4e.0 off # Floppy end device pnp 4e.1 off # Parport end - device pnp 4e.2 on # COM3 - io 0x60 = 0x3e8 - irq 0x70 = 6 - end - device pnp 4e.3 on # COM4 - io 0x60 = 0x2e8 - irq 0x70 = 6 + device pnp 4e.2 on # COM3 + io 0x60 = 0x3e8 + irq 0x70 = 6 + end + device pnp 4e.3 on # COM4 + io 0x60 = 0x2e8 + irq 0x70 = 6 irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq - end + end device pnp 4e.5 off # Keyboard end device pnp 4e.7 off # GPIO1, GAME, MIDI @@ -123,13 +123,13 @@ chip northbridge/intel/i945 end device pnp 4e.b off # HWM end - end + end - end + end #device pci 1f.1 off end # IDE - device pci 1f.2 on end # SATA - device pci 1f.3 on end # SMBus + device pci 1f.2 on end # SATA + device pci 1f.3 on end # SMBus #device pci 1f.4 off end # Realtek ID Codec - end - end + end + end end -- cgit v1.2.3