From feebd86ad2fe78955fda852103a8363a2da0cf59 Mon Sep 17 00:00:00 2001 From: Edward O'Callaghan Date: Thu, 10 Apr 2014 19:12:28 +1000 Subject: mainboard/jetway/nf81-t56n-lf: Documentation cosmetics Keep under 80 colums and Doxygen'ify inline documentation somewhat. Strip some whitespace bulk while here and refactor a little as to line wrap. Additionally, following the reasoning of: 0b2fa34 hp/pavilion_m6_1035dx/buildOpts.c: Remove commented out tables remove some fluff from buildOpts.c Change-Id: Icb38f087724d3e3511df1d554a620eb637ce286a Signed-off-by: Edward O'Callaghan Reviewed-on: http://review.coreboot.org/5481 Reviewed-by: Alexandru Gagniuc Tested-by: build bot (Jenkins) --- src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c') diff --git a/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c b/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c index 0502e5a573..441661e6ff 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c +++ b/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c @@ -401,13 +401,13 @@ AGESA_STATUS BiosReset (uint32_t Func, uint32_t Data, void *ConfigPtr) ResetType = Data; StdHeader = ConfigPtr; - // - // Perform the RESET based upon the ResetType. In case of - // WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to - // AmdResetManager. During the critical condition, where reset is required - // immediately, the reset will be invoked directly by writing 0x04 to port - // 0xCF9 (Reset Port). - // + /* + * Perform the RESET based upon the ResetType. In case of + * WARM_RESET_WHENEVER and COLD_RESET_WHENEVER, the request will go to + * AmdResetManager. During the critical condition, where reset is required + * immediately, the reset will be invoked directly by writing 0x04 to port + * 0xCF9 (Reset Port). + */ switch (ResetType) { case WARM_RESET_WHENEVER: case COLD_RESET_WHENEVER: @@ -453,8 +453,9 @@ AGESA_STATUS BiosHookBeforeDQSTraining (uint32_t Func, uint32_t Data, void *Conf /* Call the host environment interface to provide a user hook opportunity. */ AGESA_STATUS BiosHookBeforeDramInit (uint32_t Func, uint32_t Data, void *ConfigPtr) { - // Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage. - // Make sure the right speed settings are selected. + /* Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage. + * Make sure the right speed settings are selected. + */ ((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5; return AGESA_SUCCESS; } @@ -470,6 +471,7 @@ AGESA_STATUS BiosHookBeforeExitSelfRefresh (uint32_t Func, uint32_t Data, void * { return AGESA_SUCCESS; } + /* PCIE slot reset control */ AGESA_STATUS BiosGnbPcieSlotReset (uint32_t Func, uint32_t Data, void *ConfigPtr) { @@ -484,7 +486,7 @@ AGESA_STATUS BiosGnbPcieSlotReset (uint32_t Func, uint32_t Data, void *ConfigPtr FcnData = Data; ResetInfo = ConfigPtr; - // Get SB800 MMIO Base (AcpiMmioAddr) + /* Get SB800 MMIO Base (AcpiMmioAddr) */ WriteIo8(0xCD6, 0x27); Data8 = ReadIo8(0xCD7); Data16=Data8<<8; @@ -496,7 +498,7 @@ AGESA_STATUS BiosGnbPcieSlotReset (uint32_t Func, uint32_t Data, void *ConfigPtr GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; switch (ResetInfo->ResetId) { - case 46: // GPIO50 = SBGPIO_PCIE_RST# affects LAN0, LAN1, PCIe slot + case 46: /* GPIO50 = SBGPIO_PCIE_RST# affects LAN0, LAN1, PCIe slot */ switch (ResetInfo->ResetControl) { case AssertSlotReset: Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50); -- cgit v1.2.3